Structural Engineering Commons^™

Enhancing Bridge Resilience And Overheight Vehicle Mitigation Through Innovative Sacrificial Cushion Systems, Aly Mousaad Aly, Marc Hoffmann

Faculty Publications

Transportation departments have made significant strides in addressing the challenges posed by the increasing weights of trucks on bridges. While there is a growing awareness of overheight vehicle collisions with bridges, implementing effective countermeasures remains limited. The susceptibility of bridges to damage from such collisions is on the rise, further exacerbated by unpredictable lateral impact forces. This study employs nonlinear impact analysis to assess the response of an unprotected vehicle-girder model, yielding realistic deformation outcomes comparable to observed impacts on the US-61 bridge. Predictions for a truck traveling at 112.65 km/h indicate deformations of 0.229 m, 0.161 m, and 0.271 …

Experimental And Finite Element Investigation Of Shear Transfer Mechanisms And Capacity Of Continuous Post-Tensioned Concrete Beams In One-Way Slab Buildings, Suman Rijal

Civil Engineering Theses - Archive

This study investigates the shear behavior and resistance mechanisms of continuous post-tensioned beams commonly used in one-way slab buildings. Combining experimental and analytical methods, the research focuses on the targeted failure regions of prestressed and non-prestressed continuous beams to gain deeper insights into their shear behavior. The large-scale specimens used in this study featured realistic parabolic tendon profiles and an average prestress level comparable to that used in actual construction. The experimental program includes three test series, with beam designs and setups refined for each series based on observations of shear crack development and progression in the preceding series. This …

Performance Evaluation Of Composite Utility Structures Under Wildfires And Mitigation Methods, Siddhant Sitoula

Graduate Theses, Dissertations, and Problem Reports (ETD)

The Fiber Reinforced Polymer (FRP) composite utility poles and crossarms have been getting wider attention from the utility industries because of their advantages over the traditional wooden, concrete, and steel poles. Wood is vulnerable to fire, rot, and animal damage. Concrete poles are heavier, increasing both transportation and installation costs of the poles, in addition to limited-service life (40-50 years). Similarly, steel poles have durability and safety concerns because of their inherent corrosive nature and conductivity. These disadvantages are significantly reduced by the use of FRP composites in utility structures because of FRP’s strength, specific gravity, flexibility, non-conductivity and durability …

Improvement In Benefit-Cost Analysis Of Bridges Through Assessment Of Secondary Benefits And Defect Based Maintenance Cost, Shadman Sakib

Civil Engineering Theses - Archive

Benefit-cost Analysis (BCA) is conducted prior to federal grant allocation for bridge replacement and enhancement projects to prioritize decision-making. Benefits are measured based on total bridge closures, requiring vehicles to take alternate detour paths. Primary benefits are the direct user costs such as travel time saving or emission costs. However, there are more secondary benefits that are intangible and hard to monetize, but United States Department of Transportation (USDOT) guidelines suggest considering them wherever possible. There are lack of US based data and research also no set guideline by authority.

Apart from calculating primary benefits for a 95 sample of …

Statistical Analysis On The Effects Of Environmental Factors On Bridge Condition Rating In Texas, Mohammad Wasif Quadri

Civil Engineering Theses - Archive

The development of predictive models for bridge deterioration is crucial for ensuring the longevity and safety of transportation infrastructure. Bridge condition degradation is heavily influenced by environmental conditions. This research integrates various environmental variables such as rainfall, humidity, air temperature, coastal influence, and freezing effects to generate environmental risk scores. These scores help in developing environmental risk zones within the Texas region. Deck condition ratings from the National Bridge Inventory (NBI) database are used to develop deterioration models using linear regression and the Markov method. The results highlight the impact of different environmental risk zones on bridge degradation patterns and …

Floating Offshore Wind Turbine Analysis And Discovery, Payton Maddaloni

Honors Theses and Capstones

No abstract provided.

Floating Offshore Wind Turbine Analysis And Discovery, Payton Summer Maddaloni

Honors Theses and Capstones

This poster encompasses yearlong literary research into floating offshore wind turbines. Limitations created by society are discussed, these have prohibited large leaps to get the turbines out of the design phase. Traditional platform designs are displayed to show the potential the industry has to offer as the next renewable energy source. The maintenance phase seeks optimization. A case study by the University of Cincinnati used production losses as a consideration to lower the total cost of traditionally expensive maintenance. Finally, the end-of-life scenarios are currently being overlooked by developers. This opens the door to multiple options for disposal. Mimicking the …

Sustainable Use Of Wastewater In Concrete Construction, Mohammadamin Soltanianfard

Civil Engineering Dissertations - Archive

This dissertation investigates the use of wastewater from various treatment stages in concrete production to promote sustainable construction practices. Concrete prepared with potable water (PW) served as a control, while wastewater from plant final effluent (FE), chlorine contact basin (CL), secondary clarifier effluent (SC), primary clarifier effluent (PC), and bar screen effluent (BSE) was evaluated.

A comprehensive testing program was implemented to assess performance, including compressive strength tests, water absorption measurements, X-ray diffraction (XRD) analysis, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). Results showed that wastewater from advanced stages (FE, CL, SC) had minimal impact on strength and durability, …

Advancing Gfrp Column Design: Strength, Effective Lengths, And Failure Modes, Jack Alan Wykle

Graduate Theses, Dissertations, and Problem Reports (ETD)

Glass fiber reinforced polymer (GFRP) composites have become an increasingly popular choice in construction industry due to their higher strength-to-weight ratio, ease of manufacture including lower Embodied Carbon Factor, and better durability in harsh environmental conditions than conventional structural construction materials. Currently, GFRP composite column design lacks well-established design standards due to the material's unique properties such as lower bending and shear stiffness than steel, differing compressive and tensile moduli, which leads to complexities in computing buckling capacities under local effects such as flange or web buckling and even torsional buckling under off-centered compression loading. Therefore, GFRP columns will behave …

Evaluating Friction Characteristics Of High Friction Surface Treatment Application Under Varied Polishing And Slippery Conditions, Alireza Roshan, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The frictional attributes of high friction surface treatment (HFST) play a crucial role in ensuring optimal traffic safety, particularly in wet weather conditions. Friction consists of two important components: adhesion and hysteresis. This research focuses on evaluating these essential factors in HFST using two different aggregates and two distinct sizes by considering various abrasion and polishing methods. To isolate these components for assessment, testing was carried out under various slippery conditions, including dry, wet with water, and wet with water + soap. The inclusion of liquid hand soap in the test procedure effectively minimized or even eliminated the adhesion component's …

Computationally Modeling The Human-Structure Interaction Response Of An Occupied Cantilevered Structure, Brennan Smith

Honors Theses

There is a limited understanding of the impact that passive human occupants have on a dynamic structural system, referred to as Human-Structure Interaction (HSI). Cantilevers are naturally prone to excessive vibrations due to their long unsupported spans, and cantilevered structures such as those commonly found in the seating area of a stadium facility or concert hall are designed to support a high density of occupancy.

This study determined that HSI in cantilevered structures can be modeled using a simple two-degree-of-freedom system. The results of the model were validated by data that was collected on a small-scale laboratory structure intentionally designed …

Static Response Of Frp Structural Systems – Piles, Platforms, And Poles, Manish Adhikari

Graduate Theses, Dissertations, and Problem Reports (ETD)

This study addresses the static response of three Fiber Reinforced Polymer (FRP) structural systems (piles, platforms, and poles) under static loads. This research aims to improve safety and sustainability in modern infrastructure by bridging the knowledge gap currently that exists between the experimental behavior and theoretical predictions.

FRP round piles (18-inch in diameter) were tested under axial compression, shear, four-point bending and fatigue. Both the load-deflection and stress-strain responses were analyzed. Coupon tests were conducted and related to the outcomes of full-scale test data. Two major differences were observed in the response of the bending test specimens with modulus of …

Improving Aggregate Abrasion Resistance Prediction Via Micro-Deval Test Using Ensemble Machine Learning Techniques, Alireza Roshan, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Aggregate is the most extracted material from the world's mines and widely used in civil and construction projects. The Micro-Deval abrasion test (MD) is one of the most important tests that provides characteristics of crushed aggregates that show their resistance against mechanical abrasive factors such as repeated impact loading. The impact of various factors on abrasive resistance properties of aggregates has led researchers to seek correlations, often focusing on limited data samples, leading to reduced accuracy. This study employs machine learning (ML) methods to predict MD abrasion values, considering diverse aggregate properties. Various ensemble ML methods were applied, revealing the …

Miniature 3d Position-To-Optical Displacement Sensor, Genda Chen, Jie Gao, Chuanrui Guo

Patents

A miniature, micrometer-accuracy, three-dimensional (3D) position-to-optical displacement sensor that has at least one extrinsic Fabry-Perot interferometer (EFPI) in Z direction and a series of plasmonic metasurface resonators with distinctive wavelength-selective characteristics in X and Y directions. The interferometer comprises at least one single mode optic fiber for light propagation, and a substrate mirror to create a light interference fringe as a function of distance between the mirror and the distal end of the optic fiber. Each plasmonic resonator is capable of modifying the substrate mirror and comprises an array of multiple unit nanostructure unit cells that are arranged in a …

Three-Dimensional Printing Of Reinforced Concrete And Nozzle Therefor, Chenglin Wu, Genda Chen, Dimitri Feys, Guirong Yan, Bryce Tyler Tafolla

Patents

A three-dimensional printing system for reinforced concrete and a nozzle therefore. The system employs an extruder for extruding unreinforced concrete and a concrete reinforcement feeder is for feeding one or more elongate reinforcement members. The nozzle has an outlet and is operatively connected to the extruder and the concrete reinforcement feeder to receive the unreinforced concrete from the extruder and to receive the one or more elongate reinforcement members from the concrete reinforcement feeder. The nozzle combines the unreinforced concrete from the extruder and the one or more elongate reinforcement members from the concrete reinforcement feeder into a reinforced concrete …

Tough Monolayer Silver Nanowire-Reinforced Double-Layer Graphene, Yanxiao Li, Congjie Wei, Steven E. Kooi, David Veysset, Chuanrui Guo, Yuxiang Gan, Ying Zhuo, Genda Chen, Mohammad Naraghi, Keith A. Nelson, Chenglin Wu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Mixed-dimensional nanomaterials composed of one-dimensional (1D) and two-dimensional (2D) nanomaterials, such as graphene-silver nanowire (AgNW) composite sandwiched structures, are promising candidates as building blocks for multifunctional structures and materials. However, their mechanical behavior and failure mechanism have not yet been fully understood. In this work, we have performed integrated experimental, theoretical, and numerical studies to explore the performance and failure modes of graphene-AgNW composite under tensile and impact loading conditions. In situ tensile tests using a nano indenter, implemented with a push-to-pull device and a laser-induced projectile impact test system, are used to shed light on load-bearing mechanisms in graphene-AgNW …

Understanding Impact Resistance Of Hollow Core Slabs Using Frp Retrofitting. A Comparative Analysis Of Gfrp And Cfrp, Rana Essam, Mina Maxi, Mariam Ehab

Civil Engineering

No abstract provided.

Behavior Of Concrete Mixes Using Recycled Aggregate Confined With Steel Sections, Latifa Sobhi Kassem, Adnan El-Masri, Nour Webhi

BAU Journal - Science and Technology

Recycled Concrete Aggregate (RAC) is a form of recycled concrete that has been studied for green building for the past 50 years. It can be used to create strong structures, such as seismic retrofitting of earthquake-prone structures. Studies have attempted to experimentally study the effect of using recycled aggregate in concrete, but the literature lacks the use of recycled concrete aggregate rapped with steel rings. This study examines the behavior of circular concrete columns with different percentages of recycled aggregate. It examines the behavior of a column with different percentages of recycled aggregate, one without jacketing, one with partial jacketing, …

Effect Of Lime Content, Curing Temperature, And Aging Condition On Low-Alkaline Concrete, Mahdi Parsa Pour, Reza Shaban Sharghi, Faezeh Nejati, Elmira Khaksar Najafi

Makara Journal of Technology

This study determines how curing temperatures, aging condition, and hydrated lime contents affect the unconfined compressive strength (UCS), modulus of elasticity, and workability of low-alkaline concrete. Samples were prepared in two different groups to determine the optimum hydrated lime content and aging conditions to assess the mutual effect of NaOH molarity and curing temperature, that is, 70 °C for 48 h or room temperature, on samples with and without lime. The results showed that the increase in hydrated lime content affected alkali concentration. The samples with lime exhibited a clear peak in UCS (6 M NaOH) compared with the continuous …

Isolation And Characterization Of Caffeine-Degrading Bacteria From Coffee Plantation Areas In Malaysia, Elvina Clarie Dullah, Mohd Fazli Farida Asras

Makara Journal of Technology

Decaffeination by microbial degradation is currently the most optimal and low-cost approach, involving only microbial cells and/or their enzymes. The bacterium was characterized using a series of biochemical tests. Positive results were obtained from carbohydrate fermentation, citrate utilization, and catalase tests, while negative results were obtained from Voges-Proskauer (VP) and indole tests. Three different caffeine concentrations of 0.25%, 0.4%, and 2% were tested and measured through Gas Chromatography-Mass Spectrophotometry (GC-MS) analysis. The highest caffeine reduction (89.25%) was found when 0.25% caffeine was used in the media. Only a small amount of caffeine was reduced to 0.4% and 2%, with 34.78% …

Optimization Of The Building Envelope And Roof Shading To Reduce The Energy Consumption Of College Low-Rise Buildings In Indonesia, Nasruddin Nasruddin, Azimil Gani Alam, Mohammad Imroz Sohel

Makara Journal of Technology

Energy consumption in buildings is a crucial concern globally, prompting researchers to explore innovative solutions to mitigate its impact. This study investigates the optimization of building envelopes and roof shading systems of existing buildings in Indonesia to realize notable energy savings. Multiple scenarios were explored, with modifications to building envelopes and roof shading, highlighting the overall thermal transfer value as a key parameter. Using EnergyPlus simulations, the efficacy of natural ventilation in corridors and roof shading modifications was assessed in reducing energy consumption. The findings revealed that renovating existing buildings by optimization of the building envelope and roof shading by …

Early-Age Strength And Failure Characteristics Of 3d Printable Polymer Concrete: Numerical Modelling And Experimental Testing, Mohammad Amin Dehghani Najvani

Civil Engineering ETDs

The time-dependent rheological and early-age strength parameters of Polymer concrete (PC) were investigated. PC flow decreased, and the static yield stress and thixotropy increased as the specimen aged, while the dynamic yield stress remained unchanged. The study found that the Herschel-Bulkley model can accurately describe the PC’s rheological behavior over time. The change in cohesion strength and internal friction angle over time was observed using uniaxial unconfined compression and direct shear tests of fresh PC. A time-dependent MohrCoulomb failure criterion was established. Temperature analysis was used to determine the gel time and explain the evolution of the time-dependent early-age strength …

Climate Change Impact On Bridge Scour Risk In Ny State: A Gis-Based Risk Analysis Model, Muhammad Hassan Butt

Publications and Research

Bridge scour, the primary cause of bridge failure in the United States, escalates post-severe storms, necessitating effective mitigation. This study employs a GIS-based risk analysis model to assess climate change's impact on bridge scour and associated risks in New York State. Data from the National Bridge Inventory, climate hazard maps, and geospatial data are integrated.

Self-Consolidating Concrete Design For Drilled Shaft Structural Applications, Grady S. Caton

Graduate Theses and Dissertations

Self-consolidating concrete (SCC) is a relatively new concrete technology which allows the concrete to be placed without the need for manual or machine vibration. This innovation reduces labor costs, construction times, and can provide a smooth, finished surface. However, this technology is used in the United States primarily in the precast and prestressed concrete industry. The utility of SCC in structural applications, such as areas of dense reinforcement or locations where complex geometry makes consolidation impossible, is also advantageous. In this study, a series of SCC mixtures were developed both with and without fly ash replacement. These mixtures were then …

Comparing In-Situ Liquefaction Triggering Procedures For Sites In Arkansas, Sagar Barua

Graduate Theses and Dissertations

There currently exists a significant amount of uncertainty when designing piles for bridge foundations in liquefiable soil. Currently ARDOT engineers use a Standard Penetration Test (SPT) based liquefaction spreadsheet developed 10 years ago to evaluate liquefaction triggering. Since this spreadsheet was developed, updates to the liquefaction triggering procedures have been published making the spreadsheet out-of-date. Moreover, additional methods of liquefaction evaluation using cone penetration test (CPT) and shear wave velocity (Vs) provide added means of evaluating liquefaction potential. This thesis updates ARDOT's liquefaction triggering evaluation methodology with the newest procedures and incorporates additional empirical liquefaction hazard estimates such as the …

Effect Of Latex Modified Concrete Overlays With Reduced Surface Preparation On The Load Distribution And Flexural Strength Of Channel Girders, Samuel Dodd

All Theses

This thesis investigates the use of a Latex Modified Concrete (LMC) overlay to increase the strength of prestressed channel girders and enhance their ability to distribute load. The research conducted in this thesis involved material testing of several different LMC mixes and flexural testing of an LMC overlay and girder system. The material testing was used to determine a reasonable LMC mix design and surface preparation method to be used for the overlay. Based on material testing it was concluded that a rapid-set mix and pressure washing of the girder surfaces were a reasonable mix design and surface preparation for …

Structural Performance And Resiliency Of Reinforced Concrete Bridge Pier Columns, Multi-Column Piers, And Bridge Systems Subjected To Multiple Hazards – Fire, Collision, And Air Blast, Qusai Abdulkarim Alomari

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Given their close proximity to traffic and improper employment of protective systems, bridges and bridge piers are vulnerable to multi-hazard events triggered by vehicle collisions coupled with correlated and cascading events, such as explosions and fires. Despite recent catastrophic incidents that have highlighted the profound consequences of these extreme demands, including substantial damage, adverse economic impact, and loss of life, there has been a notable lack of research investigating the performance of bridges and bridge structural components under the aforementioned multi-hazards. Furthermore, current bridge design codes do not address these events assuming that, after these destructive events, replacement of the …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke

Tools

The Digital Standards pillar consists of industry experts who champion the benefits of common rules, guidelines, and workflows that facilitate the improvement of information flow and information management across asset life cycles. Digital standards provide a common language that can be translated to technical specifications enabling clients, designers, contractors, and facilities managers, irrespective of their preferred tools, to communicate efficiently and reduce cost, rework, and disputes. Working closely with the Digital Procurement and Digital Education and Training pillars, this pillar is developing and delivering Irish Information Management/BIM (Digital Construction) guidelines for the sector.

This report summarises existing digital construction standards, …