Other Civil and Environmental Engineering Commons^™

Mechanical And Durability Properties Of Fly Ash Geopolymer Concrete – A Review, Ali Shebli, Jamal Khatib, Adel Elkordi

BAU Journal - Science and Technology

Geopolymers have emerged as a promising alternative for Ordinary portland cement (OPC) in construction industry, due to their potential to minimize the emissions of carbon dioxide (CO₂) and improve the efficiency of waste recycling. This paper aims to study the fresh and hardened properties of fly ash geopolymer concrete (GPC), as well as to review the raw materials used in the production of geopolymers. Several factors impact the mechanical and durability properties of fly ash GPC, including the specific type of fly ash utilized, the curing temperature, the alkaline activator (AA) concentration, and the type of AA used. …

Integration Of Environmental Sustainability And Decision Making: Case Studies Of Civil Infrastructure, Sussan Moussavi

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Sustainable development is important in the planning and design of critical civil infrastructure systems. However, decision making related to these systems currently lacks meaningful sustainability considerations. To fill this gap, this research explores the life cycle impacts of wastewater and energy infrastructure using case studies, life cycle assessment methodologies, and stakeholder discussions. Environmental and economic impacts, which are more commonly quantified, as well as more difficult to quantify societal factors, are explored. The goal of this research is to help inform decision making and facilitate the consideration of the three pillars of sustainability (e.g., economic, environmental, and social) during the …

Enhancing Construction Safety Training Of Bridges Using Augmented Reality And Virtual Reality, Mohamed Sherif Elrifaee

Theses and Dissertations

Infrastructure development projects are widely acknowledged as some of the most complex and challenging projects to undertake. The construction of bridges, in particular, has proven to be a significant safety risk for workers, with a considerable number of accidents reported on construction sites. There is a lack of comprehensive training programs specifically designed for bridge construction safety, and only a few studies have explored the use of both AR and VR to enhance safety training in construction. As such, this research aims to improve the safety of bridge construction sites through the implementation of Augmented Reality (AR) and Virtual Reality …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

Columbus, Nebraska: Southern Housing Development Design Proposal, Ryan Weyers, Caiden Dynek, Alex Papa, Brexton Robertson, Kaden Perala

Honors Program: Senior Projects (Public)

The following paper proposes the design and creation of a new housing development in the city of Columbus, Nebraska in a lot to the south of the city and directly north of the Columbus wastewater treatment plant. The goal of this proposal is to provide readers with confidence that our company is the most qualified to complete the project and will create the safest, most comfortable, most efficient, and most cost-effective final design. This proposal seeks to offer a solution to the lack of affordable housing for the growing workforce in Columbus. In order to arrive at this solution, each …

Integrating Steel Slag Aggregates Into Asphalt Paving By Harmonizing Availability, Quality, Economics, And The Environment, Timothy R. Murphy

Theses and Dissertations

This thesis provides guidance on how to balance matters related to the environmental stewardship, market sources, origin and uses, material properties, performance, and economic impact of using slag materials in pavements. The literature on this topic provides numerous references on the use of slag materials for specific applications, and this thesis aims to make use of those references along with other data from the author to describe slag materials from a holistic perspective and provide some suggestions for balancing several factors that impact optimal use of this resource within pavement structures. Discussion is given to the increased importance of recycling …

Safety And Operational Assessment Of Rural Free Right-Turn Ramp Intersections, Jonathon Camenzind

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Free right-turn (FRT) ramps are alternative right-turn lane designs for intersecting highways. As of 2023, 79 FRT ramps exist at 68 rural highway intersections in Nebraska. FRT ramps may be located on three-legged or four-legged intersections and may be on the minor, the major, or both minor and major approaches of the same intersection.

This research compared the 68 rural FRT intersections to 24 similar non-FRT rural intersections to identify differences in crash frequency and crash rate and tested for statistical significance using a two-sample t-test. Crash data were obtained for the ten- year period of 2010-2019, with a focus …

Reducing Infiltration And Inflow In Small Collection Systems: Environmental, Economic, And Other Impacts, Andrew Hansen

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Wastewater treatment facilities (WWTFs) and the collection systems (CSs) which feed them provide essential services to society by collecting sewage (aka wastewater), biologically treating it, and minimizing risks to human health as well as the impact of waste on the environment. However, as collection systems age, increasing infiltration and inflow (I/I) from groundwater and stormwater can negatively affect the system. I/I is often mitigated to reduce flow and eliminate other negative impacts to the system.

Ten total case studies, seven mechanical water resource recovery facilities (WRRFs) and three lagoon facilities, were examined for the environmental, economic, and other impacts/benefits from …

Sustainable Revitalization Of Asphalt Pavements: An In-Depth Analysis Of Enhancing The Performance Of Asphalt Binder Through The Application Of Rheological And Molecular Dynamics Simulation Techniques, Muhammad Ahmad

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Vegetable-based oils such as corn and soybean oil have triglycerides and fatty acids that allow them to be considered sustainable and effective recycling agents (RAs) for aged asphalt binder. However, there are concerns about their effect on the recycled asphalt binder's long-term performance, moisture damage resistance, and self-healing characteristics restoration. In this study, crude corn oil (CO) and crude soybean oil (SO) were used as RAs to restore the performance of a reclaimed asphalt binder (RAB) extracted from reclaimed asphalt pavement. The binder extracted from RAB was modified with a neat binder PG64-28 and RAs to restore the high-end performance …

Assessing The Performance Of High-Rap Mixtures Incorporating Crude Vegetable Oils And An Antioxidant From Mechanical, Environmental, And Economic Perspectives, Nitish R. Bastola

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Utilization of mixtures with high amounts of reclaimed asphalt pavement (RAP) in the pavement industry is limited because of the adverse effects of aged materials in recycled asphalt materials. To date, numerous approaches have been used to reduce the adversity of RAP in mixtures. One such approach is the use of recycling agents (RAs) from various sources, such as petroleum and bio-oil. However, the current need is to maximize the use of RAP by adopting a sustainable source of RAs. Therefore, this study uses two RAs based on vegetable oils (crude soybean oil and crude corn oil) with high-RAP mixtures …

Evaluation Of The Effect Of Mls Density Level Data On Dem, Essam Ghanem, Mostafa Rabah, Fekry Ashraf

Mansoura Engineering Journal

Mobile laser scanning (MLS) systems are quickly establishing themselves as the primary source of high-quality digital elevation models (DEM). Data density is the key element that determine the quality of DEMs. Moreover, point density acts a vital role in MLS operation planning and MLS project's cost. This study's goal was to evaluate the impact of point density from MLS on creating DEMs and the accuracy of computed volume in different interpolation methods. The finding demonstrated that the DEM's quality and the volume are more impacted by density level and interpolation method. Interpolation methods are affected by point density. There is …

Numerical Investigations Of Gfrc Beams Strengthened In Shear With Innovative Techniques, Marwa H. Bondok, Gamal I. Khaleel, Ahmed S. Debaiky, Mohamed H. Makhlouf

Mansoura Engineering Journal

This paper discusses the Finite Element analysis (FE) conducted to predict the behavior of Glass Fiber Reinforced Concrete (GFRC) beams without shear reinforcement (stirrups) and strengthen them with proposed techniques to increase their shear strength. for this study, A total of eighteen (18) (120 * 300 * 2200 mm) specimens were modeled using Ansys™ mechanical. The main variables were the percentage of discrete glass fiber in the concrete (0.0, 0.6, and 1.2%), the type of main reinforcing bars (steel or GFRP), the shear strengthening material (GFRP or steel) links, the strengthening systems (side near-surface mounted (SNSM) bars, externally bonded (EB) …

Environmental Assessments On A Local Project, Robert Winebrinner, Trevor Wieseke, Summer R. Elmore, Alison Krupski, Mike Maurovich

Purdue Road School

This presentation will go through the environmental process of a recent $125M local project within Noblesville. What are the major differences between the National Environmental Policy Act (NEPA) and State Environmental Policy Act (SEPA) process as it relates to an environmental assessment (EA)? What is required, what is not required, and what is optional? How long does the process take? Join us as we walk through this exciting process and experience.

Additive Manufacturing Of Engineered Cementitious Composites With Ultra-High Tensile Ductility, Amir Bakhshi

Civil Engineering ETDs

One of the critical factors in the development of additive manufacturing in the construction industry is designing suitable materials for 3D printing applications. 3D concrete printing (3DCP) has gained significant attention due to the abundance and availability of concrete. However, concrete is a brittle material and, without proper reinforcement, cannot meet the requirements for structural purposes. Engineered Cementitious Composites (ECC), known for high ductility, and strain-hardening with low fiber contents, can potentially eliminate the need for steel reinforcement in 3D printing without any need for manual placement of reinforcement. A set of systematic tests on ECC mix designs' fresh and …

Virtual Accident Curb Risk Habituation In Workers By Restoring Sensory Responses To Real-World Warning, Namgyun Kim, Laurent Grégoire, Moein Razavi, Niya Yan, Changbum R. Ahn, Brian A. Anderson

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

In high-risk work environments, workers become habituated to hazards they frequently encounter, subsequently underestimating risk and engaging in unsafe behaviors. This phenomenon has been termed "risk habituation"and identified as a vital root cause of fatalities and injuries at workplaces. Providing an effective intervention that curbs workers' risk habituation is critical in preventing occupa-tional injuries and fatalities. However, there exists no empirically supported intervention for curbing risk habituation. To this end, here we investigated how experiencing an accident in a virtual reality (VR) environment affects workers' risk habituation toward repeatedly exposed workplace hazards. We examined an underlying mechanism of risk habituation …

Survey Data: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony Robinson Dr.

Datasets

A survey was conducted to determine the preferred set point temperature and heating pattern among Irish households. The survey was sent to 237 people living across Ireland, out of which 32 respondents skipped the survey and 9 surveys were found to be incomplete. Amongst the counties in Ireland 71.1% respondents were from Dublin, 6.34% from Kildare, 5% from Meath, 5% from Wicklow and in all the remaining counties response rate was below 2%. Part 1: This section of the survey recorded information regarding characteristics of the building such as house type, wall type, insulation type, period the house was built. …

The Seasonality And Climate Predictability Of The Frequency Of Extreme Flood Events Across The Contiguous United States, Ololade S. Alonge

Dissertations and Theses

This paper investigates the seasonality of the frequency of extreme flood events across the United States (US) and outlines the impact of large-scale climate on its spatio-temporal variability. The analysis was conducted on 317 stream gages from the United States Geological Survey (USGS) Hydro-Climatic Data Network (HDCN) over a period of 68 years (1950-2017), resulting in the estimation of the counts of extreme floods (defined as the number of days in each month when the streamflow is greater than the 95^th percentile of daily distribution) and the determination of the Markham’s seasonality index for it. 97% of the stations …

Hdd Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony James Robinson

Datasets

In this study, a thermal-economic analysis was conducted to determine the optimum insulation thickness of retrofitted insulation walls in different regions in Ireland. This was based on the Heating Degree Day method (HDD). This dataset contains optimum insulation thickness, payback period, cost savings and carbon emission for all 25 counties in the Republic of Ireland

Investigating The Change In Pavement Cracking Data Due To Automated Data Collection Methods, Faisal Quibria Chowdhury

Graduate Theses, Dissertations, and Problem Reports (ETD)

Data collection on pavement surface cracks is crucial for the state Departments of Transportation (DOTs) to make informed decisions on maintenance, repair, and rehabilitation (MR&R) activities. The collected cracking data is translated into a pavement performance indicator to assess the condition of pavement sections and identify MR&R needs based on predetermined threshold values set by the state DOTs. State DOTs have transitioned from manual to automated data collection as automation offers many advantages over manual data collection, such as improved data collection rates, efficiency, cost reduction, and safety. As the state DOTs have integrated automated data into the pavement performance …

Assessing Erosion Improvement In Beach Sand Treated With Bioslurry, Peter E. Schmillen

UNF Graduate Theses and Dissertations

Over the last 10 years microbially induced calcite precipitation (MICP) has emerged as a possible solution to reduce shoreline erosion. To date, most MICP soil treatments that have been studied involve column injection using a pump. In recent years, MICP application through surface percolation has gained traction as an alternative technique, but data using this technique are limited. More recently, a new treatment recipe/technique was developed, and this technique was termed “bioslurry”. Like most MICP studies research with bioslurry concentrated on the column injection method, and surface percolation has received very limited attention. This paper discusses the treatment of Florida …

Evaluation For Using Expended Bioelectrochemical Systems As Soil Amendments For Improved Corn Plant Growth And A Drought Resistant Soil., Jackson Lee Sauers

Theses and Dissertations

A long-held practice is to mix agricultural soil with a soil amendment to improve growing conditions in crops. A common soil amendment is biosolids produced from both municipal and dairy wastewater due to the macro- and micronutrients within it. Both the agricultural and wastewater industries are participating in the Circular Economy concept (CEC). Two experiments explored using expended bioelectrochemical systems (BES) that treated either synthetic dairy wastewater (DWW) or synthetic municipal wastewater (SWW) as soil amendments to improve corn plant growth when treated with three different nutrient treatments: 100%- 50%- and 0% Hoagland Nutrient Solutions. Biochar and used terracotta clay …

Behavior Of Completely Automated Evapotranspiration Estimation (Eemetric), Atiqullah Atif

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Evapotranspiration (ET) is the second-largest component in the water balance equation, globally consuming 70% of the earth’s annual precipitation. Accurate and consistent estimation of ET is essential for ensuring water resources sustainability, proper management, planning, and regulations of water resources. Though a 100% accurate estimation of ET may not be feasible with the current technology, there are proven techniques that give us estimates of ET we can heavily rely on. Mapping Evapotranspiration at High Resolution with Internalized Calibration (METRIC) is a widely used surface energy balance model that produces relatively accurate ET maps utilizing remote sensing data and requires skilled …

Empirical Fragility Functions And Numerical Parametric Study For Buckling Of Steel Grain Bins Under High Wind Loads, Andrew Ruder

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

While rural infrastructure is critical to the agricultural industry, it has been historically more susceptible to damage and slower to recover following natural disasters than its urban and suburban counterparts. This has been made evident most recently by the events of the August 10, 2020, derecho in which rural regions in Iowa were among the hardest hit areas with sustained windspeeds exceeding 120 mph. Among the most frequently damaged structures in this event were corrugated steel grain bins, which farmers and co-ops use to dry and store certain commodities. Unlike most other critical structures, steel grain bins are not designed …

Evaluation Of Swelling Pressure And Shear Strength Of Inorganic Microfiber-Reinforced Bentonite For The Engineered Barrier System, Jose Maria Ferdinand Victoria Calaunan

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Nowadays, the permanent disposal of high-level radioactive waste materials has been a primary concern in several countries. The deep geological repository, being the preferred disposal method across the globe, utilizes a network of engineered barriers to prevent the radioactive material from spreading throughout the facility and harming the natural environment. Part of this engineered barrier system (EBS) is the buffer material, which essential function is holding the radioactive waste-containing canister in place. However, the potential generation of desiccation cracks in this buffer material is imminent due to the heat emitted from the radioactive waste. Knowing the capability of inorganic fibers …

Measuring Acoustic Nonlinearity Of Elastic Materials Using Thermal Modulation Of Ultrasonic Waves, Bibo Zhong

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Nonlinear acoustic techniques have been used to determine the nonlinear properties of materials. Existing methods either require complex equipment to measure absolute nonlinear coefficients or can only be used on laboratory-sized specimens. A recently developed thermal modulation method addresses the limitations of existing methods, but further theoretical analysis and validation are required.

In this dissertation, theoretical analyses were first conducted to study the mechanically and thermally induced acoustoelastic effect. Beginning with the wave equation, the relationship of the ultrasonic wave velocity with respect to mechanical strain and the thermal strain was derived in detail. These analyses provided theoretical support for …

The Living Breakwaters Pdr Efforts Econcrete Resource Analysis, Guianina Ferrari, Shervon Stephens, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy impacted 443,000 people and caused nearly $19 billion (about $58 per person in the US) worth of damage within New York City. As part of the New York City infrastructure reparation plan, the Living Breakwaters project in Tottenville addressed coastal resilience, allocating $100M of public funds to a series of artificial breakwaters by the southwest coast of Staten Island. Each breakwater is constructed and designed to mitigate water flow in storm events. ECOncrete, a primary element of the breakwater, is a specialty cast cementitious product that is marine organism-friendly that encourages biocalcification and photosynthesis. …

Active Rheological And Stiffening Control Of Cementitious Systems For Additive Manufacturing, Abdul Basit Peerzada

All Dissertations

Technological advancements and automation in the last two decades have made additive manufacturing of cementitious systems a reality. Among all the additive manufacturing techniques used for cementitious materials, layer-by-layer extrusion-based printing is the most used technique. For a layer-by-layer printing process, the requirements of cementitious materials vary from those of a conventional construction process. Typically, the cementitious materials are pumped to a print head using a positive-displacement pump. The pumpability of the cementitious material for a specific pumping system depends on its rheological properties. For effective pumping, the yield stress and plastic viscosity of a cementitious system should be low. …

Erosion And Resuspension Of Cohesive Sediments In Coastal Louisiana, Laith Qasem Shamaileh

LSU New Orleans Theses and Dissertations

The research presented in this study is motivated by the need to improve the predictions of cohesive sediment erosion and subsequent transport. In addition, the knowledge of the geotechnical engineering soil properties related to the erosion of sediments in coastal Louisiana has broad implications as these properties are used in transport models guiding the current restoration efforts. The erosion measuring device used in the study is the Cheng-Han Tasi and Wilbert Lick Shaker. Previous studies have been conducted before using the Shaker, but challenges with the calibration of the shear stress hampered the resuspension results produced by the Shaker. Therefore, …

Data-Driven Analysis For Facility Management In Higher Education Institution, Ashish Kumar Pampana, Jungho Jeon, Soojin Yoon, Theodore J. Weidner, Makarand Hastak

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Planned Preventive Maintenance (PPM) and Unplanned Maintenance (UPM) are the most common types of facility maintenance. This paper analyzes current trends and status of Facility Management (FM) practice at higher education institutions by proposing a systematic data-driven methodology using Natural Language Process (NLP) approaches, statistical analysis, risk-profile analysis, and outlier analysis. This study utilizes a descriptive database entitled "Facility Management Unified Classification Database (FMUCD)" to conduct the systematic data-driven analyses. The 5-year data from 2015 to 2019 was collected from eight universities in North America. A preprocessing step included but was not limited to identifying common data attributes, cleaning noisy …

Minimizing Surface Run-Off, Improving Underground Water Recharging, And On-Site Rain Harvesting In The Kathmandu Valley, Ambika P. Adhikari, Keshav Bhattarai

Himalayan Research Papers Archive

Nepal's political institutions and administrative units were thoroughly restructured in 2015 with the promulgation of the new Constitution. Several rural areas were combined to meet the definition of urban threshold criteria to classify rural areas into urban categories. Accordingly, over 3,900 local political and administrative units were amalgamated into 753 units, of which, 293 units are classified as urban. Within these newly defined urban areas, many natural environments have been converted into impervious surfaces such as paved roads, sidewalks, and building roofs. These impervious surfaces have drastically increased the amount of surface run-offs-often termed as "urban floods"--under increasing precipitation caused …