Open Access. Powered by Scholars. Published by Universities.®

Construction Engineering and Management Commons™

Open Access. Powered by Scholars. Published by Universities.®

Transportation Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 481 - 510 of 876

Full-Text Articles in Construction Engineering and Management

Study On Applicability Of Flexible Gabion Revetment In Soft Soil Subgrade In Lake District, Su Weiwei, Lei Mingxuan, Liu Guotian, Zhang Liujun, Liu Junyong May 2023

Study On Applicability Of Flexible Gabion Revetment In Soft Soil Subgrade In Lake District, Su Weiwei, Lei Mingxuan, Liu Guotian, Zhang Liujun, Liu Junyong

Journal of China & Foreign Highway

Based on FLAC3D finite difference software, this paper conducts numerical simulations of both flexible gabion revetment structures and rigid revetment structures to compare their deformation and stress characteristics. The results indicate that the flexible gabion revetment structure demonstrates excellent applicability for soft soil subgrades in lake districts. Compared with rigid revetment structures, the gabion revetment structure improves overturning stability through coordinated deformation within the foundation. It significantly reduces the basal stress, thus lowering the bearing capacity requirements for the foundation, and ensures a more uniform stress distribution at the base, minimizing differential settlement and enhancing foundation stability. Moreover, the gabion …

Go to article

Research And Application Of Dynamic Compaction Treatment Method For Highway Subgrade In Karst Development Area, Liu Xiaoming, Wang Yigang, Zhao Minghua May 2023

Research And Application Of Dynamic Compaction Treatment Method For Highway Subgrade In Karst Development Area, Liu Xiaoming, Wang Yigang, Zhao Minghua

Journal of China & Foreign Highway

This paper utilizes discrete-continuum coupled numerical simulation to investigate the failure modes of karst cave roofs with varying spans under specific compaction energy levels. The relationship between the span of the cave roof and the compaction energy required to cause roof collapse is established, providing an estimation method for the maximum unsupported span of cave roofs within the subgrade area. Based on this, the stability of karst cave foundations under the influence of subgrade loads can be evaluated. Depending on the results, a double-layer reinforced continuous concrete slab can be installed in the pavement base to enhance stability and mitigate …

Go to article

Deformation Monitoring Of Highway Subgrade In Alpine Area Based On Spaceborne Insar, Luo Boren, Yu Fei, Yu Shaohuai May 2023

Deformation Monitoring Of Highway Subgrade In Alpine Area Based On Spaceborne Insar, Luo Boren, Yu Fei, Yu Shaohuai

Journal of China & Foreign Highway

The harsh geological and climatic conditions in the high-altitude alpine regions of Northwest China, including the widespread distribution of seasonal permafrost and other unfavorable geological bodies, significantly affect the service life of highways and threaten driving safety. Traditional highway deformation monitoring methods are inefficient, limited in coverage, and provide incomplete deformation information. This study employs spaceborne InSAR technology for highway deformation monitoring, enabling large-scale extraction of deformation information along highway corridors. The findings reveal the deformation patterns of highway subgrades in permafrost regions, offering fundamental data for targeted remediation of hazardous highway sections. This approach ensures the scientific construction and …

Go to article

Study On Treatment Of Karst Foundation By Dynamic Compaction, Lyu Jiang, Zhao Hui, Yang Biao May 2023

Study On Treatment Of Karst Foundation By Dynamic Compaction, Lyu Jiang, Zhao Hui, Yang Biao

Journal of China & Foreign Highway

Dynamic compaction is a commonly used method for treating karst foundations with cavities; however, the design parameters of dynamic compaction under different working conditions lack clear standards. This paper employs the finite element software Abaqus to simulate the effects of surrounding rock quality and karst roof thickness on the stability of karst cave roofs during dynamic compaction treatment. The results indicate that the vertical displacement and maximum tensile stress of karst cave roofs are negatively correlated with roof thickness. For Grade II and III surrounding rocks with better properties, no cave collapse occurred after dynamic compaction treatment. In contrast, for …

Go to article

Research On Compaction Control Method Of High Water Content And High Liquid Limit Clay In Guizhou Province, Xu Shuliang May 2023

Research On Compaction Control Method Of High Water Content And High Liquid Limit Clay In Guizhou Province, Xu Shuliang

Journal of China & Foreign Highway

To study and verify the compaction control method for high liquid limit clay subgrade in the humid and rainy regions of Guizhou Province, a series of experiments were conducted on high water content and high liquid limit clay from the Kaiyang Expressway (Kaili to Yangjia) in Guizhou. The experiments included wet heavy compaction tests, CBR strength tests, basic physical property tests, consolidation tests, thermogravimetric analysis, and trial road tests to analyze the performance of high liquid limit clay in road applications. The results show that for high liquid limit clay, increasing compaction energy does not always improve performance, as excessive …

Go to article

Study On Dynamic Resilience Modulus Prediction Model Of Subgrade Fine‐Grained Soil Based On Physical Property Parameters, Tan Wei May 2023

Study On Dynamic Resilience Modulus Prediction Model Of Subgrade Fine‐Grained Soil Based On Physical Property Parameters, Tan Wei

Journal of China & Foreign Highway

This paper investigates representative fine-grained subgrade soils from a highway project. Samples with varying water content and compaction degrees were prepared, and the effects of water content, compaction degree, plasticity index, dynamic deviator stress, and confining pressure on the dynamic resilience modulus (Mr) were analyzed using dynamic triaxial tests. Matlab’s global optimization toolbox was employed to identify the relationships between model parameters ki and physical property indices, thus constructing a prediction model for the dynamic resilience modulus based on physical properties. The predictive performance of this model was compared with conventional models outlined in existing standards. The results show that …

Go to article

Study On Failure Mechanism Of Rainfall Slope Based On Full‐Scale Slope Model Experiment, Zhang Yongchuang May 2023

Study On Failure Mechanism Of Rainfall Slope Based On Full‐Scale Slope Model Experiment, Zhang Yongchuang

Journal of China & Foreign Highway

Field investigations in debris flow source areas reveal that granite is exposed on slope surfaces, while a thin layer of sandy, weathered residual soil is distributed at the slope tops. This paper focuses on the significant permeability differences between the slope base and the upper weathered soil layer. A full-scale slope model experiment was conducted to replicate these characteristics, including rainfall infiltration simulations under both exposed surface conditions and conditions with non-woven fabric filter mats applied. The aim was to investigate the failure mechanism of rainfall-induced debris flows. The results show that the primary trigger for debris flows is the …

Go to article

Detection Method Of Rural Road Pavement Damage Based On Smart Phone, Zhang Yang, He Li, Tang Qingzhou, Zhang Dejin May 2023

Detection Method Of Rural Road Pavement Damage Based On Smart Phone, Zhang Yang, He Li, Tang Qingzhou, Zhang Dejin

Journal of China & Foreign Highway

Automatic detection of rural road pavement damage is a critical prerequisite for scientific maintenance. To address issues such as high false detection rates, missed detection, and the inability to quantify damage when using smartphones for pavement damage detection, this paper proposes a novel detection method. The proposed method involves using a smartphone to capture pavement images. A region of interest is first selected in the image, followed by weighted least-squares filtering, Canny edge detection, and Hough transform line detection to identify the pavement, minimizing environmental interference and reducing false detection rates. Perspective transformation is then applied to the pavement region …

Go to article

Research On Road Crack Recognition Model Based On Yolo V3 Deep Learning Algorithm, Su Weiguo, Wang Jingxiao May 2023

Research On Road Crack Recognition Model Based On Yolo V3 Deep Learning Algorithm, Su Weiguo, Wang Jingxiao

Journal of China & Foreign Highway

To address the challenges of manual intervention in road crack detection and the inaccuracy of traditional recognition algorithms, this paper proposes a road crack recognition method based on the YOLO v3 deep learning algorithm. The dataset images were first resized to 416×416 pixels. Labelme was then used to annotate cracks in the images and convert the boundary box location information. Finally, the YOLO v3 algorithm framework was employed for model training. The results show that the YOLO v3 algorithm achieves precision, recall, and F1 scores above 95%, with an image detection speed of 0.123 seconds per image. The YOLO v3 …

Go to article

Comparative Analysis Of Asphalt Pavement Performance Prediction Models Based On Gamma And Markov Processes, Ma Shibin, Chen Yonghao May 2023

Comparative Analysis Of Asphalt Pavement Performance Prediction Models Based On Gamma And Markov Processes, Ma Shibin, Chen Yonghao

Journal of China & Foreign Highway

Pavement performance prediction is a critical component of pavement management systems, serving as an essential basis and prerequisite for decision-making in asphalt pavement maintenance. This paper introduces the relevant theories of Gamma and Markov stochastic processes to construct asphalt pavement performance prediction models and address uncertainties related to pavement degradation. The results show that stochastic process models are effective in predicting pavement performance degradation and service life. Matlab programming was used to predict asphalt pavement performance and lifespan, yielding pavement degradation curves that significantly improve prediction accuracy and reliability. Finally, taking a test road section in Hebei Province as an …

Go to article

Study On Interlayer Bonding Properties And Influence Factors Of Cape Seal, Li Yan, Zhang Chengxue, Qiu Yeji, Zhang Haijun May 2023

Study On Interlayer Bonding Properties And Influence Factors Of Cape Seal, Li Yan, Zhang Chengxue, Qiu Yeji, Zhang Haijun

Journal of China & Foreign Highway

To address pavement issues such as shoving and rutting caused by insufficient bonding strength in cape seal layers, this paper investigates the interlayer bonding properties and influencing factors of cape seal. Mechanical tests were conducted using a pavement interlayer shear-pull testing device. Through interlayer pull-off, direct shear, and torsional shear tests, the maximum tensile force, shear force, and torque at failure were obtained. The interlayer bonding performance of cape seal was analyzed in terms of gravel coverage rates, as well as upper and lower layer combinations. The results show that when the gravel coverage rate is 80%-90%, and the cape …

Go to article

Analysis Of Socket Depth Between Bridge Pier And Cap With Improved Socket Connection, Ge Jiping, Lai Luqi, Wang Zhigang May 2023

Analysis Of Socket Depth Between Bridge Pier And Cap With Improved Socket Connection, Ge Jiping, Lai Luqi, Wang Zhigang

Journal of China & Foreign Highway

Traditional prefabricated socket-type bridge piers are limited in engineering applications due to the requirement for deep socket connections. This paper proposes an improved socket connection design incorporating measures such as side shear keys, U-shaped anti-punching reinforcement at the pier base, high-strength non-shrink grouting materials, and large-diameter corrugated metal pipe constraints. The current formulas for calculating socket depth in socket-type connections are reviewed, and a modified calculation formula for improved socket-type piers is presented. The influence of factors such as axial compression ratio and concrete strength on socket depth is discussed. The analysis shows that the improved socket connection reduces socket …

Go to article

Finite Element Model Updating Of Long Span Suspension Bridge Based On Optimized Radial Basis Function Neural Network, Yang Wenfu, Chen Xin May 2023

Finite Element Model Updating Of Long Span Suspension Bridge Based On Optimized Radial Basis Function Neural Network, Yang Wenfu, Chen Xin

Journal of China & Foreign Highway

To achieve accurate prediction and analysis of the structural behavior of long-span suspension bridges, a finite element model updating method is proposed. An optimized radial basis function neural network (RBFNN) is constructed using a genetic algorithm to map the relationship between structural responses and parameters. Using structural dynamic responses as inputs, the model updating was performed on a long-span suspension bridge using both numerical simulation data and actual data from a health monitoring system. The results show that the optimized RBFNN effectively represents the functional relationship between structural responses and parameters to be updated. Model updating via the optimized RBFNN …

Go to article

Study On Relationship Of Solar Radiation Temperature And Pier‐Top Displacement Of Ultra‐High Thin‐Walled Hollow Pier, Liu Zhishen, Zhang Yifei, Song Fei, Su Jufeng, Ren Xiang May 2023

Study On Relationship Of Solar Radiation Temperature And Pier‐Top Displacement Of Ultra‐High Thin‐Walled Hollow Pier, Liu Zhishen, Zhang Yifei, Song Fei, Su Jufeng, Ren Xiang

Journal of China & Foreign Highway

Thin-walled hollow piers are widely used in high-pier and long-span continuous rigid-frame bridges. Solar radiation-induced displacements at the tops of ultra-high thin-walled hollow piers can negatively affect the structural alignment and stress during construction and post-construction phases. Based on a 180 m high thin-walled hollow pier of a large bridge in Shaanxi Province, this paper analyzes the temperature field and pier-top displacement using data collected during two 24-hour periods: August 28-29 and October 11-12. The temperature field and pier-top displacement patterns over time were studied using finite element analysis. The results show that the temperature difference between the north and …

Go to article

Fracture Mechanics‐Based Fatigue Study Of Corrugated Steel Webs, Li Haidi, Yang Lei May 2023

Fracture Mechanics‐Based Fatigue Study Of Corrugated Steel Webs, Li Haidi, Yang Lei

Journal of China & Foreign Highway

To develop fatigue analysis and evaluation methods for corrugated steel web structures, constant-amplitude fatigue load tests were conducted on experimental beam models, supplemented by fatigue test data from domestic and international studies. The finite element submodeling method was employed to obtain stress distribution functions at structural details, and the weight function method was used to derive the stress intensity factor at the crack tip. The Paris law in fracture mechanics was applied to derive the S-N curve for corrugated steel web structures. Comparative analysis with fatigue test results shows that when the initial crack depth is set as a0=t/20 (accounting …

Go to article

Discussion On Formula Of Off‐Load Increase Coefficient Of Single‐Box Multi‐Cell Wide Girder, Gao Qingfei, Wang Renzhi, Li Jun, Guo Binqiang, Qin Weijun May 2023

Discussion On Formula Of Off‐Load Increase Coefficient Of Single‐Box Multi‐Cell Wide Girder, Gao Qingfei, Wang Renzhi, Li Jun, Guo Binqiang, Qin Weijun

Journal of China & Foreign Highway

Single-box multi-cell wide girders are widely applied in highway and urban bridges due to their excellent integrity and large width, especially with increasing traffic volumes. However, existing methods for calculating the off-load increase coefficient of single-box multi-cell wide girders are either too complex or fail to meet engineering needs, limiting their applicability in preliminary design. This paper explores eight influencing factors of the off-load increase coefficient, calculates the coefficients using the transverse frame method, and proposes an empirical formula for the off-load increase coefficient. The proposed formula is validated using the Xiushui Street Wide Girder Bridge in Jilin City.

Go to article

Research On Multi‐Source And Heterogeneous Data Integration Of Large Bridge Health Monitoring System, Wang Daijun, Zhou Tiantu, Fu Junmin, Chen Xing, Lu Shuai, Yu Zheng May 2023

Research On Multi‐Source And Heterogeneous Data Integration Of Large Bridge Health Monitoring System, Wang Daijun, Zhou Tiantu, Fu Junmin, Chen Xing, Lu Shuai, Yu Zheng

Journal of China & Foreign Highway

Large bridge health monitoring systems are characterized by numerous sensors, diverse types, various communication methods, and flexible network configurations. The multi-source heterogeneous nature of the data poses significant challenges for data integration. To address the application requirements of bridge health monitoring, this paper designs a multi-source heterogeneous data integration scheme. The scheme achieves structured storage of multi-source heterogeneous data and introduces the concept of “structured communication.” This enables structured communication configuration, unified communication control, and flexible data processing, standardizing and simplifying communication configuration management in data acquisition systems. These improvements enhance code simplicity, maintainability, and the overall integration level of …

Go to article

Selection And Design Of Anchorage For Suspension Bridge In Downhill Area Under Complex Geological Conditions, Chen Yongliang, He Shiyong, Xia Zhixian, Wu Wenxiang May 2023

Selection And Design Of Anchorage For Suspension Bridge In Downhill Area Under Complex Geological Conditions, Chen Yongliang, He Shiyong, Xia Zhixian, Wu Wenxiang

Journal of China & Foreign Highway

Due to the complexities of design and construction, long-span single-tower suspension bridges are rarely applied in practice. The main bridge of the Jinsha River Bridge at Tiger Leaping Gorge adopts a 766 m single-span single-tower steel truss suspension bridge. On the Lijiang anchorage side, complex geological conditions posed significant challenges due to geological structures, while the reservoir level of the planned hydropower station created adverse hydrological conditions for waterproofing and durability of the anchorage system. The selection of an appropriate anchorage type was therefore particularly challenging. This paper first details the selection process for anchorage under complex geological conditions. It …

Go to article

Study On Countermeasures And Genetic Analysis Of Sloping Bridge Pile Hole Wall Failure, Yang Hua, Yin Xiaotao May 2023

Study On Countermeasures And Genetic Analysis Of Sloping Bridge Pile Hole Wall Failure, Yang Hua, Yin Xiaotao

Journal of China & Foreign Highway

The stability of slopes and the safety of bridge piles are interdependent, and ensuring the safety of sloping terrain is crucial for the safe construction of bridge piles. Based on three collapsed pile sections of the Huadizhai No. 2 Bridge, this paper utilized geological surveys to design initial terrain and altered terrain slope stability calculation conditions, along with horizontal compensation force calculation conditions under a safety standard of 1.35. By integrating geological analysis, slope stability assessment, and compensation force evaluations, the causes of pile hole collapse and corresponding countermeasures were analyzed. The results show that under the initial terrain, the …

Go to article

Key Technology For Design Of Composition Section Of Hybrid Girder Cable‐Stayed Bridge, Tian Bo, Song Lubing May 2023

Key Technology For Design Of Composition Section Of Hybrid Girder Cable‐Stayed Bridge, Tian Bo, Song Lubing

Journal of China & Foreign Highway

The main bridge of the Yibin Nanxi (Xianyuan) Yangtze River Bridge adopts an asymmetric hybrid girder cable-stayed design with a 572 m main span. The main span and the north-side span utilize hybrid girders, while the south-side span uses a concrete girder. A steel-concrete composite section is introduced between the south-side span and the main span. This paper explores multiple schemes for the location and key structural design of the steel-concrete composite section, prioritizing a full-section rib connection with a pressure-bearing shear transfer transition structure. The structural rationality and construction feasibility were verified through on-site static model tests, failure model …

Go to article

Inspection And Evaluation Of Load‐Bearing Capacity Of Hollow‐Box Arch Bridge, Song Zegang, Yang Min May 2023

Inspection And Evaluation Of Load‐Bearing Capacity Of Hollow‐Box Arch Bridge, Song Zegang, Yang Min

Journal of China & Foreign Highway

The inspection and evaluation of the load-bearing capacity of in-service bridges are crucial for ensuring structural and operational safety. This paper investigates a 90 m span hollow-box arch bridge, assessing its damage condition, material properties, and state parameters to determine partial evaluation coefficients. The bridge’s ultimate limit state and serviceability limit state load-bearing capacities of the main arch ring were then evaluated using both the original design standards and the current code. The results show that, compared to the original design standards, the safety factor for the compressive load-bearing capacity of the main arch ring cross-section is significantly reduced when …

Go to article

Model Test Study On Mechanical Characteristics Of Spherical Joints In Multi‐Point Support Swivel System, Zeng Lifei May 2023

Model Test Study On Mechanical Characteristics Of Spherical Joints In Multi‐Point Support Swivel System, Zeng Lifei

Journal of China & Foreign Highway

As a critical load-bearing component in bridge swivel systems, the mechanical behavior of spherical joints is essential for the safety of bridge swiveling operations. This study focuses on the spherical joints of a multi-point support swivel system for the bridge over the Xiangyang North Marshalling Yard. Model tests were conducted to analyze the effects of the number of supporting legs, swivel speed, track smoothness, and wind load on the stress of spherical joints. The stress variation patterns of spherical joints under different working conditions were investigated. The results show that increasing the number of supporting legs improves the uniformity of …

Go to article

Analysis On Vehicle‐Bridge Interaction Of High‐Pier Continuous Rigid Frame Bridge, Liu Huaquan, Yang Dehai, Cai Chengqi, Huang Zhenming, Chen Zhouqi May 2023

Analysis On Vehicle‐Bridge Interaction Of High‐Pier Continuous Rigid Frame Bridge, Liu Huaquan, Yang Dehai, Cai Chengqi, Huang Zhenming, Chen Zhouqi

Journal of China & Foreign Highway

To study the dynamic response characteristics of the vehicle-bridge system under moving vehicle loads, a three-span high-pier continuous rigid frame bridge was selected as the research object. A 2-axle, 7-degree-of-freedom vehicle model was applied to explore the effects of vehicle speed, number of vehicles, and vehicle load on the dynamic response of the vehicle-bridge system. The results show that vehicle speed has minimal impact on the peak displacement response of the bridge. However, when vehicles travel at the same speed, the peak displacement response differs across bridge spans, with resonance occurring at a vehicle speed of 40 km/h. As the …

Go to article

Analysis And Reinforcement Measures For Unconventional Cracks In Gravity U‐Type Abutment, Cheng Kun, Du Yinguang, Liu Zhang May 2023

Analysis And Reinforcement Measures For Unconventional Cracks In Gravity U‐Type Abutment, Cheng Kun, Du Yinguang, Liu Zhang

Journal of China & Foreign Highway

Horizontal cracking at the foundation level is uncommon in gravity U-type abutments. This paper investigates the causes and reinforcement measures for unconventional horizontal cracks in the foundation and vertical cracks in the abutment wall of a gravity U-type abutment on a highway bridge. Survey and analysis results show that the vertical cracks in the abutment wall are structural cracks caused by excessive reaction forces from permanent loads combined with the impact loads from vehicles at expansion joints. The horizontal foundation cracks result from the presence of filler interlayers at the foundation, which softened over time due to water exposure, leading …

Go to article

Research On Application Of Equivalent Stiffened Plate Elements In Local Stability Calculation Of U‐Shaped Stiffened Plates, Chen Xiangjun May 2023

Research On Application Of Equivalent Stiffened Plate Elements In Local Stability Calculation Of U‐Shaped Stiffened Plates, Chen Xiangjun

Journal of China & Foreign Highway

To address the issue of excessively large computational models in the numerical simulation of U-shaped stiffened plates in large-span flat steel box girder main girders, this paper proposes a finite element calculation theory using equivalent stiffened plate elements and a simplified method for U-shaped stiffened plates. By simplifying the U-shaped small box ribs in U-shaped stiffened plates into equivalent stiffening strips, the transverse stiffness of the cover plate is redistributed, and the effect of equivalent stiffeners on the stress of the plates is calculated. Stability analysis was conducted using Fortran language developed on the Ansys platform, and the results were …

Go to article

Study On Supporting Effect Of Pre‐Stressed Rock Bolts On Tunnel Face, Shen Xiangqian, Chen Daoyun, Zheng Chao May 2023

Study On Supporting Effect Of Pre‐Stressed Rock Bolts On Tunnel Face, Shen Xiangqian, Chen Daoyun, Zheng Chao

Journal of China & Foreign Highway

Focusing on the stability issues of the tunnel face in the large deformation section of soft rock in the Muzhailing Tunnel on the Weiyuan-Wudu Expressway, this paper proposes a technical solution for temporary reinforcement of the tunnel face using pre-stressed rock bolts. Numerical simulations were conducted to evaluate the reinforcement effect and effective range of pre-stressed rock bolts on the tunnel face, and the influence of initial ground stress on the reinforcement effect was further analyzed. The results show that under the given engineering conditions, pre-stressed rock bolts demonstrate significantly better reinforcement effects on the tunnel face compared to fully …

Go to article

Optimization Research Of Laying Method And Material Type Selection Of Thermal Insulation Layer For Tunnels In Cold Region, Wu Tao, Liu Zhichun, Liu Xuejiao, Zhang Hongfei May 2023

Optimization Research Of Laying Method And Material Type Selection Of Thermal Insulation Layer For Tunnels In Cold Region, Wu Tao, Liu Zhichun, Liu Xuejiao, Zhang Hongfei

Journal of China & Foreign Highway

To address the issue of frost damage in tunnels in cold regions, research on thermal insulation and frost prevention is crucial. This paper utilizes an improved analytic hierarchy process combined with grey relational analysis to identify optimal insulation materials suitable for different laying methods that provide effective insulation. Numerical simulation methods were then used to calculate and analyze the tunnel temperature field under various combinations of insulation materials and laying methods. Based on the “composite temperature field” comparison results, the optimal insulation scheme was determined. The results show that the “off-wall laying + Furritek insulation board” combination is the optimal …

Go to article

Research On Gas Migration And Ventilation Disaster Prevention In Highway Tunnel, Wang Zhongqi, Lin Zhi, Feng Sen, Yang Hongyun, Chen Xiang, Liu Jiang May 2023

Research On Gas Migration And Ventilation Disaster Prevention In Highway Tunnel, Wang Zhongqi, Lin Zhi, Feng Sen, Yang Hongyun, Chen Xiang, Liu Jiang

Journal of China & Foreign Highway

To understand the gas migration patterns and ventilation disaster prevention techniques during tunnel construction, this paper uses a real tunnel as the engineering context. A 3D transient ventilation physical model was established using Ansys Fluent, and the effects of ventilation on gas concentration were analyzed in combination with on-site monitoring data. The results show that the uneven diffusion of gas and airflow is prominent. Gas concentration and wind speed stabilize at a distance of 120 m from the tunnel face as ventilation time increases. During gas monitoring and prevention, special attention should be paid to the area between the tunnel …

Go to article

Study On Health State Evaluation Method Of Highway Tunnel Based On Neutrosophic Theory, Deng Fayou, Xia Caichu, Xu Chongbang May 2023

Study On Health State Evaluation Method Of Highway Tunnel Based On Neutrosophic Theory, Deng Fayou, Xia Caichu, Xu Chongbang

Journal of China & Foreign Highway

The structural complexity and inherent uncertainties of highway tunnels necessitate comprehensive consideration of various uncertain factors to reasonably evaluate their health state. By introducing neutrosophic theory, which accounts for structural uncertainties, this paper proposes a health state evaluation method for highway tunnels based on neutrosophic cosine and tangent similarity measures. The proposed method was applied to evaluate the health state of 10 samples. A comparison between the actual evaluation grades and the results obtained using the proposed method shows that the evaluation results are consistent with the actual grades. This indicates that the proposed method effectively addresses uncertainties in the …

Go to article

Interlayer Bonding Performance Of Wtr/Apao Composite Modified Asphalt, Ji Hongyan, Yan Kezhen, Yuan Jian, Zhang Xuanyu May 2023

Interlayer Bonding Performance Of Wtr/Apao Composite Modified Asphalt, Ji Hongyan, Yan Kezhen, Yuan Jian, Zhang Xuanyu

Journal of China & Foreign Highway

To investigate the bonding performance of waste tire rubber (WTR)/ amorphous α-olefin copolymer (APAO) composite modified asphalt as a waterproof bonding layer in asphalt pavements on cement concrete bridges, shear and pull-off tests were conducted. The shear strength and pull-off strength of SBS-modified asphalt, WTR-modified asphalt, and WTR/APAO composite modified asphalt were compared under different application rates and temperatures. The results show that WTR/APAO composite modified asphalt exhibits the best bonding performance, followed by WTR-modified asphalt, with SBS-modified asphalt performing the worst. Based on the shear and pull-off strengths at different temperatures, the optimal application rates were determined as 1.7 …

Go to article

First Prev Next Last