Open Access. Powered by Scholars. Published by Universities.®

Construction Engineering and Management Commons™

Open Access. Powered by Scholars. Published by Universities.®

Transportation Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 151 - 180 of 875

Full-Text Articles in Construction Engineering and Management

Analysis Of Joint Load Transfer Performanc E Of Prefabricated Steel‑Concrete Hollow Pavement Slab, Zhu Guangshan, Dong Zihao, Yang Ye, Wang Jinshan Feb 2025

Analysis Of Joint Load Transfer Performanc E Of Prefabricated Steel‑Concrete Hollow Pavement Slab, Zhu Guangshan, Dong Zihao, Yang Ye, Wang Jinshan

Journal of China & Foreign Highway

In order to study the joint load transfer capacity of a prefabricated steel-concrete hollow pavement slab,a finite element model was established with ABAQUS to carry out numerical analysis.The variation laws of the maximum deflection value and joint load transfer coefficient of the pavement slab with and without cavitation were compared to analyze the load transfer capacity.The results show that when cavitation occurs in the slab,the load transfer coefficient of the slab decreases with the increase in the cavitation area,but the load transfer coefficient of the slab does not change significantly when the cavitation depth reaches a certain level.When there is …

Go to article

A Review Of Performance Of Cement- Stabilized Base Materials Containing Recycled Conc Rete Aggregate, Song Chengzhe, Li Jiaquan, Kong Jingxun, Zhou Changjun, An Xing Feb 2025

A Review Of Performance Of Cement- Stabilized Base Materials Containing Recycled Conc Rete Aggregate, Song Chengzhe, Li Jiaquan, Kong Jingxun, Zhou Changjun, An Xing

Journal of China & Foreign Highway

Semi-rigid base offers excellent performan ce and is widely used as a high-grade highway subgrade in China.Currently,with a large stockpile of waste concrete in the country,using it as aggregate in pavement base materials is of great significance for environmental protection,energy conservation,and emission reduction.In this paper,the basic performance indicators of recycled concrete aggregate (RCA ) and the performance of cement-stabilized base materials containing RCA,including strength,shrinkage,fatigue,and erosion resistance were reviewed.It finds that the basic performance indicators of RCA are lower than those of natural aggregate.Therefore,the proportion of RCA in base materials may be limited to 20% ‒ 50%.The shrinkage and erosion resistance …

Go to article

Research Progress Of Modified Asphalt With Graphene Materials, Zhang Zongwei, He Kai Feb 2025

Research Progress Of Modified Asphalt With Graphene Materials, Zhang Zongwei, He Kai

Journal of China & Foreign Highway

To clarify the research status of mo dified asphalt properties with graphene materials,relevant research literature in China and abroad was consulted to compare the effects of various graphene materials and preparation parameters on asphalt.The results show that graphene,nano graphite sheets,and oxidized graphene can improve the microstructure and road performance of asphalt,increase the service life of asphalt,and reduce the maintenance cost of asphalt.Continuously optimizing the preparation parameters of modified asphalt and exploring the mechanism of modified asphalt with new material not only help the promotion and application of new road asphalt technologies but also reduce energy consumption,pollutants,and carbon emissions,providing new ideas …

Go to article

Mechanical Performance Of Nuts In Tie Rod Assembly Of Anchorage System Of Suspension Bridge, Liu Zheng, Li Zhao, Qin Guifang, Xie Qinjian, Jiang Yuangen, Zhang Jiyong, Wang Lei, Ma Yafei Feb 2025

Mechanical Performance Of Nuts In Tie Rod Assembly Of Anchorage System Of Suspension Bridge, Liu Zheng, Li Zhao, Qin Guifang, Xie Qinjian, Jiang Yuangen, Zhang Jiyong, Wang Lei, Ma Yafei

Journal of China & Foreign Highway

In order to investigate the stress and fatigue performance of nuts in the tie rod assembly of the anchorage system of a long-span suspension bridge,the finite element software Ansys and Abaqus were used to establish the full bridge model and the local finite element models of the tie rod and the hexagonal nut,respectively.Secondly,the whole process variation law of the synergistic force of the tie rod and the nut under the axial tensile load was revealed.The difference in mechanical performance between slotted nuts and unslotted nuts was compared,and the detailed structural parameters of slotted nuts were optimized.Finally,the static tensile and fatigue …

Go to article

Installation Direction Design And Construction Control Of Sliding Bearing Of Continuous Girder Bridge, Guan Changlu, Sun Xiudong, Dong Hao, Wang Xingzhou Feb 2025

Installation Direction Design And Construction Control Of Sliding Bearing Of Continuous Girder Bridge, Guan Changlu, Sun Xiudong, Dong Hao, Wang Xingzhou

Journal of China & Foreign Highway

Continuous girder bridges can improve the structural stress,increase the structural bearing capacity,and promote ride comfort.However,some continuous girder bridges suffer from issues such as bearing dislocation,upper torsion,and damage to seismic arrestors.To identify deficiencies in current design and construction control,an in-depth analysis of these issues was conducted.The findings reveal the main reason is that the bidirectional sliding bearings (nearly half of the total ) fail to provide horizontal force,and the main sliding direction of the unidirectional sliding bearings is inconsistent with the deformation of the bridge superstructure.In this paper,factors including temperature-induced deformation,material shrinkage,elastic compression,creep,and construction process control of the bridge superstructure were …

Go to article

Crack Propagation Of Vehicle‑Steel Bridge Deck Slabs Based On Pavement Damage, Tang Sheng, Yin Xinfeng, Zhang Ming, Yan Wanli Feb 2025

Crack Propagation Of Vehicle‑Steel Bridge Deck Slabs Based On Pavement Damage, Tang Sheng, Yin Xinfeng, Zhang Ming, Yan Wanli

Journal of China & Foreign Highway

In order to study the influence of vehicles under different pavement damage conditions on crack propagation of welded toe at the roof of steel bridge deck slabs,finite element models of suspension bridges,fine vehicles,and local steel bridge deck slabs were established,and multiple groups of obstacle heights were set to simulate pavement damage.The explicit dynamic analysis program was used to simulate vehicle-bridge coupling vibration and extract the forces of vehicles on the steel bridge deck slabs at different lanes,speeds,and obstacle heights.The crack propagation life of the welded toe at the roof was obtained by applying them to a local steel bridge deck …

Go to article

Calculation Of Socket Depth For Circular Pipe Pier-Bearing Platform Socket Connection, Chen Jingli, Xiao Feng, Wang Zhigang, Wang Zhihai, Xu Yan Feb 2025

Calculation Of Socket Depth For Circular Pipe Pier-Bearing Platform Socket Connection, Chen Jingli, Xiao Feng, Wang Zhigang, Wang Zhihai, Xu Yan

Journal of China & Foreign Highway

The minimum socket depth for circular pipe pier-bearing platform socket connection can be calculated according to Article C.0.3 in the Specifications for Design of Highway Precast Concrete Bridges (JTG/T 3365 -05—2022 ).In order to enable engineering designers to fully understand and correctly apply the calculation formula in this article,this paper first introduced the main technical features of the typical connection scheme,as well as the structural failure principles and objectives formulated in the specification of the typical connection scheme.Then,it briefly introduced the experimental research content and results of the typical connection scheme and explained the key construction measures and their functions …

Go to article

Reliability Analysis Of Long‑Span Concrete Box Arch Bridge Under Temperature Effect Combinations, Zheng Junlin, Jiang Youbao, Zheng Xinhao, Lu Naiwei Feb 2025

Reliability Analysis Of Long‑Span Concrete Box Arch Bridge Under Temperature Effect Combinations, Zheng Junlin, Jiang Youbao, Zheng Xinhao, Lu Naiwei

Journal of China & Foreign Highway

The existing design methods for concrete arch bridge structures do not consider the random characteristics of the eccentricity generated by load effects and overlook the influence of stochastic eccentricity on structural reliability.To address this deficiency,a calculation model for eccentricity under temperature effect combinations was derived.The random characteristics of eccentricity for different sections of the main arch of concrete arch bridges and their sectional bearing capacities were analyzed under different load parameter combinations.By utilizing the Monte Carlo method,reliability indices were computed for different sections of the main arch and different load parameter combinations after considering the random characteristics of eccentricity.The results …

Go to article

Preparation And Performance Of Emulsified Asphalt With High-Temperature Resistant And Wheel Sticking-Free Effects, Yan Han, Zha Xudong, Kang Xiaogang, Gong Yan, Zhang Zhengji, Zhang Wenshuai Feb 2025

Preparation And Performance Of Emulsified Asphalt With High-Temperature Resistant And Wheel Sticking-Free Effects, Yan Han, Zha Xudong, Kang Xiaogang, Gong Yan, Zhang Zhengji, Zhang Wenshuai

Journal of China & Foreign Highway

To address the problem of wheel sticking at high temperatures in the construction process of existing wheel sticking-free emulsified asphalt of tack coat,this paper adopted the composite modification method of 70# and 15# matrix asphalt and waterborne polyurethane resin (WPR ) to prepare hard asphalt-WPR (HA-WPR )-modified emulsified asphalt in accordance with the high-temperature resistant and wheel sticking-free requirements.Through a series of laboratory tests,the technical performance,wheel sticking-free performance,and interlayer bonding performance of the emulsified asphalt were researched and compared with ordinary wheel sticking-free emulsified asphalt and ordinary emulsified asphalt tack coat oil.The results show that the technical performance of the …

Go to article

Model Analysis Of Axial Compressive Mechanical Properties Of Concrete Column Constrained By Textile-Reinforced Engineered Cementitious Composites, Ma Gao, Wang Zhaoyang Feb 2025

Model Analysis Of Axial Compressive Mechanical Properties Of Concrete Column Constrained By Textile-Reinforced Engineered Cementitious Composites, Ma Gao, Wang Zhaoyang

Journal of China & Foreign Highway

In order to avoid the problem of matrix cracking in textile-reinforced concrete (TRC ),a reinforcement method of textile-reinforced engineered cementitious composites (ECC ),namely TRECC composed of textile and high-performance ECC was proposed.However,the research on the axial compressive mechanical properties of TRECC-constrained concrete in China and abroad is still insufficient,and there is a lack of reliable strength and ultimate strain analysis models.A total of 116 axial compression test results of TRC-constrained concrete columns and 125 axial compression test results of TRECC-constrained concrete columns were collected.The confinement mechanisms and failure modes of TRECC and TRC-constrained concrete were compared.Then,the strength models and ultimate …

Go to article

Key Techniques For Constructing Flexible Geosynthetic Reinforced Soil Abutments, Yu Xiaoxiao, Xu Chao, Li Haoyu, Zuo Binli Feb 2025

Key Techniques For Constructing Flexible Geosynthetic Reinforced Soil Abutments, Yu Xiaoxiao, Xu Chao, Li Haoyu, Zuo Binli

Journal of China & Foreign Highway

The flexible geosynthetic reinforced soil (GRS ) abutments offer several advantages,including cost saving,reduced bridgehead misalignment,and good seismic performance,showing great potential for application in transportation engineering both in China and abroad.The flexible GRS abutment is essentially composed of a composite structure formed by closely spaced layers of geosynthetic reinforcement material,and the construction quality and load-bearing capacity are crucial to the success of the project.To ensure construction quality and study the construction process of flexible GRS abutments,a construction site monitoring method was adopted.Based on the experience from the construction of a vehicular overpass on the Wuwei ‒ Yuexi Expressway,the quality control measures …

Go to article

Research On Mechanical Entry Excavation And Reinforcement Measures For Large Cross-Section Tunnel, Liang Xiao, Li Ke, Guo Hongyan, Hu Xuebing, Yao Chengrui Feb 2025

Research On Mechanical Entry Excavation And Reinforcement Measures For Large Cross-Section Tunnel, Liang Xiao, Li Ke, Guo Hongyan, Hu Xuebing, Yao Chengrui

Journal of China & Foreign Highway

With the innovation of tunnel construction techniques and mechanical equipment,mechanical drilling and blasting for mountain tunnels have gradually developed.However,several challenges exist during the mechanical entry excavation for mountain tunnels,including the significant influence of geological factors,limited equipment adaptability,and constrained working space.This research,based on a specific tunnel project,utilized FLAC3D finite difference software to study the mechanical excavation method and auxiliary reinforcement measures for shallow-buried segments at the large cross-section tunnel portal.A comparative analysis was conducted on the displacement of surrounding rock,the stress of supporting structures,and the variation of plastic zones before and after tunnel face reinforcement for different advances per cycle and …

Go to article

Application Research Of Bim Technology In Highway Prefabricated Bridge Scheme Design, Li Jinlong, Wang Xinnan, Liu Dongsheng, Chen Zhongzhi Feb 2025

Application Research Of Bim Technology In Highway Prefabricated Bridge Scheme Design, Li Jinlong, Wang Xinnan, Liu Dongsheng, Chen Zhongzhi

Journal of China & Foreign Highway

At present,the highway bridge scheme requires continuous adjustments and upgrading due to iterative updates of design data and refined investigation of the surrounding environment of the bridge site.This paper upgraded the traditional route design software,developed a GIS-integrated platform,built a three-dimensional environment with design data as the core,and created a bridge scheme model through parametric intelligent design.It also evaluated and optimized the bridge scheme based on the integration of the bridge model and the surrounding environment.The results show that by using BIM technology,the forward design of a bridge scheme based on a three-dimensional environment is realized.This approach automates the scale statistics …

Go to article

Development Of A Drone-Assisted Pavement Management Framework Based On The Pavement Condition Index For University Parking Lots, Omesh Pasuluru Jan 2025

Development Of A Drone-Assisted Pavement Management Framework Based On The Pavement Condition Index For University Parking Lots, Omesh Pasuluru

Civil Engineering Theses - Archive

Efficient pavement management is essential for keeping university parking lots in good condition. At the University of Texas at Arlington, parking areas experience heavy use and environmental wear, which can cause damage if not addressed early. Traditional methods for assessing pavement conditions are time-consuming, interrupt daily activities, and are expensive. Hence, there is a need for better solutions. This study introduces a drone-based pavement management approach that uses the Pavement Condition Index (PCI) system. The PCI is a numerical scale from 0 to 100 that rates pavement quality based on surface condition. A high PCI score (85-100) indicates the pavement …

Go to article

Influence Of Deck Area And Average Daily Traffic On The Deterioration Of Bridge Superstructures., Faysal Ahamed Jan 2025

Influence Of Deck Area And Average Daily Traffic On The Deterioration Of Bridge Superstructures., Faysal Ahamed

Graduate Theses, Dissertations, and Problem Reports (ETD)

State Departments of Transportation (DOTs) are responsible for maintaining approximately 623,000 bridges across the United States. Effective bridge management requires a comprehensive understanding of the factors influencing structural deterioration. Numerous studies have explored the effects of average daily traffic (ADT) and deck area (DA) on bridge deck deterioration. Given the interdependence between bridge decks and superstructures, it is plausible that ADT and DA significantly influence superstructure condition ratings and deterioration trends. However, their impact on superstructures remains insufficiently studied. In addition, existing studies primarily focus on overall bridge deterioration without adequately differentiating between superstructure designs and materials and maintenance authorities. …

Go to article

Dynamic Modulus Of Sbs-Modified Asphalt Mixtures Added With Ground Tire Rubber Content, Azharul Islam Jan 2025

Dynamic Modulus Of Sbs-Modified Asphalt Mixtures Added With Ground Tire Rubber Content, Azharul Islam

College of Graduate Studies: Theses & Dissertations

The study investigates the improvement of the dynamic shear modulus in the base and styrene butadiene styrene (SBS) modified asphalt mixture by accumulating varying amounts of ground tire rubber through an Asphalt mixture performance tester (AMPT). This thesis specifically explores how different percentages of ground tire rubber (GTR) influence the mechanical properties and durability of the asphalt mixture articulated with two grades, PG 64-22 and PG 76-22. The experimental framework consisted of preparing asphalt mixtures blended with 10% to 15% of the binder for PG 64-22 and 3% to 8% of GTR for PG 76-22. The laboratory testing involved using …

Go to article

Comparative Analysis Of Lidar And Close-Range Photogrammetry Techniques For Inspection Of Mse Walls In Two Georgia Bridges, Md. Mehrab Hossain Jan 2025

Comparative Analysis Of Lidar And Close-Range Photogrammetry Techniques For Inspection Of Mse Walls In Two Georgia Bridges, Md. Mehrab Hossain

College of Graduate Studies: Theses & Dissertations

Mechanically Stabilized Earth (MSE) retaining walls are durable, settlement tolerant, easy to install, and present cost-effectiveness, in highway bridges. Nevertheless, the cost of repairing MSE walls is high, and it is crucial to have an accurate, quantitative, and scalable inspection method for early detection of potential problems. This study aims to analyze and evaluate undesired displacements that may affect these walls over time. For this, two remote-sensing technologies are considered: Light Detection and Ranging (LiDAR) and 3D Close Range Photogrammetry (CRP). Their performances are compared against an accurate Robotic Total Station (RTS) device, serving as the benchmarking instrument. This work …

Go to article

Optimization Of Construction Scheme Of Ultra‑Large Special‑Shaped Foundation Pit Adjacent To Existing Station And Temporary Steel Bridge, Chen Dengwei Dec 2024

Optimization Of Construction Scheme Of Ultra‑Large Special‑Shaped Foundation Pit Adjacent To Existing Station And Temporary Steel Bridge, Chen Dengwei

Journal of China & Foreign Highway

With the intensifying development density of urban underground space in China，the impact of ultra-large foundation pit construction on the normal operation of adjacent structures cannot be ignored.Relying on the Huangmugang Comprehensive Transportation Hub Project in Shenzhen，this paper studied the deformation of the envelope structure and soil caused by the excavation of the ultra-large special-shaped foundation pit，as well as the structural response of the deformation of the adjacent existing station and the temporary steel bridge.The paper optimized the construction scheme of the special-shaped foundation pit excavation.The results show that the deformation trend of the envelope structure on the north and south …

Go to article

Friction‑ 1d Transformer ： A 1d Vision Transformer Hybrid Model For Skid Resistance Prediction On Asphalt Pavements, Pei Feifei, Nie Zilong, Xu G Uomin, Zhan You, Gong Xianqi, Ai Changfa, Deng Yuan, Ji Zhengyun, Wang Shifa Dec 2024

Friction‑ 1d Transformer ： A 1d Vision Transformer Hybrid Model For Skid Resistance Prediction On Asphalt Pavements, Pei Feifei, Nie Zilong, Xu G Uomin, Zhan You, Gong Xianqi, Ai Changfa, Deng Yuan, Ji Zhengyun, Wang Shifa

Journal of China & Foreign Highway

The friction performance of road surfaces is an important indicator of highway safety，which is closely related to road texture.In this paper，a set of three-dimensional denoising methods for road texture data with different noise levels was proposed，which could effectively remove noise while preserving local texture features.In addition，a skid resistance prediction model named Friction- 1D Transformer was developed based on the design concept of Vision Transformer （VIT） for skid resistance evaluation of asphalt pavements.Unlike traditional convolutional neural networks，the Friction- 1D Transformer utilized positional encoding structures and multi-head attention mechanisms to extract global features from one-dimensional （1D） texture signals along the direction of …

Go to article

Experimental Investigation On Shrinkage Effect Of Ultra‑High Performance Concrete Under Steam Curing, Li Bing, Yang Tengyu, Fang Changle, Luo Zirun, Li Chuanxi, Tan Ke Dec 2024

Experimental Investigation On Shrinkage Effect Of Ultra‑High Performance Concrete Under Steam Curing, Li Bing, Yang Tengyu, Fang Changle, Luo Zirun, Li Chuanxi, Tan Ke

Journal of China & Foreign Highway

Determining the free shrinkage of U HPC is an important basis for analyzing the shrinkage effect of steel UHPC composite bridge deck.Therefore，based on the UHPC materials to be used in a project，three batches of UHPC free shrinkage specimens were made，and three specimens were made in each batch.By testing the strain and temperature of specimens during curing，the free shrinkage strain-age curve and temperature-age curve of UHPC were obtained.The development and variation law of UHPC shrinkage strain are discussed.Based on the experimental results，the equivalent time is introduced on the basis of Arrhenius empirical formula，and a modified model of free shrinkage is proposed.Finally，based …

Go to article

Mechanical And Vegetative Performance Of Bamboo Fiber‑Reinforced Eco‑Concrete With Recycled Aggregate, Li Tao, Deng Bofan, He Maolin, Liu Ting, Chen Houde Dec 2024

Mechanical And Vegetative Performance Of Bamboo Fiber‑Reinforced Eco‑Concrete With Recycled Aggregate, Li Tao, Deng Bofan, He Maolin, Liu Ting, Chen Houde

Journal of China & Foreign Highway

In response to the current common urban construction waste disposal issue，this study utilized processed recycled construction waste aggregate and bamboo waste materials to produce bamboo fiber-reinforced eco-concrete with recycled aggregate.By adjusting the dosage of bamboo fiber，the effects of the dosage of bamboo fiber on the mechanical and vegetative performance of the concrete were systematically analyzed by means of orthogonal tests and verification methods.The test results indicate that bamboo fiber enhances the toughness of eco-concrete significantly.Particularly，when the dosage of bamboo fiber exceeds 3.0 kg/m3，there is a significant enhancement in the tensile performance of the eco-concrete with recycled aggregate.Due to the spatial …

Go to article

Curing Law And Road Performance Of Polyurethane Mixture, Sun Shengkai, Zheng Mao, Tang Xiong, Liu Li, Zhong Shengran, Si Te Dec 2024

Curing Law And Road Performance Of Polyurethane Mixture, Sun Shengkai, Zheng Mao, Tang Xiong, Liu Li, Zhong Shengran, Si Te

Journal of China & Foreign Highway

Polyurethane mixture is composed of polyurethane binder，rubber particles，and stones.Compared with ordinary asphalt mixture，it has the characteristics of a higher content of rubber particles and large void ratios.This article first tested the viscosity-time curve and viscosity-temperature curve of one-component polyurethane and determined the compaction temperature of the polyurethane mixture.Based on the rutting test，three-point bending test，water immersion Marshall test，freeze-thaw splitting test，and pendulum friction test，the road performance of the polyurethane mixture under different replacement amounts of rubber particles was tested.The research results show that the mixing temperature of PU- 1 polyurethane mixture can be basically controlled between 73 ℃ and 81 ℃，and it …

Go to article

Elimination Method Of Temperature Lag Effect In Deformation Monitoring Data Of Cable‑Stayed Bridge Structures, Liu Hongshuang, Zhai Wenqiang, Zeng Guoliang Dec 2024

Elimination Method Of Temperature Lag Effect In Deformation Monitoring Data Of Cable‑Stayed Bridge Structures, Liu Hongshuang, Zhai Wenqiang, Zeng Guoliang

Journal of China & Foreign Highway

There is a temperature lag effect in the deformation monitoring data of the bridge structure.Eliminating the temperature lag effect is of great significance in the health monitoring of the bridge structure.Based on the linear correlation between the deformation of the bridge structure and the temperature，this paper applied the goodness of fit test and proposed a time-domain translation elimination method.On this basis，by taking the long-term synchronous monitoring of the tower inclination，beam end displacement，main girder deflection，and temperature data of a cable-stayed bridge as an example，this method was used to eliminate the temperature lag effect in the deformation monitoring data and compared with …

Go to article

Sensitivity Analysis Of Parameters Of Cable‑Stayed Bridges With Full Floating Spatial Frame, Liu Anqing, Yan Tengfei, Zheng Pengju, Gu Yanlin, Li Jie, Wang Qiang Dec 2024

Sensitivity Analysis Of Parameters Of Cable‑Stayed Bridges With Full Floating Spatial Frame, Liu Anqing, Yan Tengfei, Zheng Pengju, Gu Yanlin, Li Jie, Wang Qiang

Journal of China & Foreign Highway

In order to clarify the influence of design parameters on the mechanical behavior of a cable-stayed bridge of a floating system，a finite element model of the bridge was established by using the finite element analysis software MIDAS/Civil based on a single-tower double-cable plane steel-concrete composite beam cable-stayed bridge with full floating spatial frame.The sensitivity of parameters such as temperature effect，secondary dead load，and support system in the completed bridge state was analyzed and compared with the semi-floating system of the bridge.The results show that temperature and secondary dead load have a significant impact on the deflection and stress of the main …

Go to article

Segment Connection Mod E For Stiffening Girder Hoisting Construction Of Long‑Span Steel Truss Girder Suspension Bridge, Shao Guangmiao, Pan Q Uan, Yan Donghuang, Xu Hongsheng Dec 2024

Segment Connection Mod E For Stiffening Girder Hoisting Construction Of Long‑Span Steel Truss Girder Suspension Bridge, Shao Guangmiao, Pan Q Uan, Yan Donghuang, Xu Hongsheng

Journal of China & Foreign Highway

In the process of stiffening girder construct ion of a long-span steel truss girder suspension bridge，different connection modes of stiffening girder segments will directly affect the internal force，alignment，and bridge state of the structure during construction.By taking the construction of the stiffening girder of a bridge as the research background，the finite element model of the whole process of the bridge was established.The advantages and disadvantages of the segmented hinge method and the segmented rigid connection method were compared，and the two-two segmented rigid connection scheme was proposed.On this basis，according to the changing law of steel truss section alignment and lower chord opening …

Go to article

Linkage Control Method For Expressway Toll Stations And Plane Intersections, Lei Qing, Wang Zhaoyong, Wu Yurong, Jiang Weiwei, Luo Zhongbin Dec 2024

Linkage Control Method For Expressway Toll Stations And Plane Intersections, Lei Qing, Wang Zhaoyong, Wu Yurong, Jiang Weiwei, Luo Zhongbin

Journal of China & Foreign Highway

In order to solve the problem of vehicle queuing overflow caused by the mismatch between the expressway toll stations and the capacity of plane intersections，the formula for calculating the maximum queue length was given by analyzing the traffic operation characteristics between toll stations and plane intersections and considering vehicles ’ lane-changing behavior.Due to the strong coupling of the traffic operation between toll stations and plane intersections caused by a short distance between them，a unified linkage control optimization model was established.The research shows that if the queue length in the connecting direction of the plane intersections exceeds the allowable maximum queue …

Go to article

Research On T‑Beam System With Diaphragm Based On Intelligent Construction, Liu Lang, Tao Qiyu, Xu Qigang Dec 2024

Research On T‑Beam System With Diaphragm Based On Intelligent Construction, Liu Lang, Tao Qiyu, Xu Qigang

Journal of China & Foreign Highway

The traditional precast T-beam faces issues such as excessive diaphragms，difficult formwork installation and removal，and low levels of intelligence in intelligent bridge construction.To address these issues，this paper focused on the optimization of the number of diaphragms and the application of prefabricated diaphragms.By analyzing different diaphragm configuration schemes and comparing the contributions of prefabricated diaphragms and precast diaphragms to the lateral stiffness of the bridge，this paper deeply explored the impact of diaphragms on bridge performance.The research results indicate that the T-beam system with fewer diaphragms is feasible in intelligent construction，but the system without diaphragms places higher demands on the performance of bridge …

Go to article

3d Reconstruction Method Of Tunnel Surrounding Rock Fracture Based On Vtk, Liu Houxiang, Su Heng Dec 2024

3d Reconstruction Method Of Tunnel Surrounding Rock Fracture Based On Vtk, Liu Houxiang, Su Heng

Journal of China & Foreign Highway

Fracture parameters are important reference factors for surrounding rock stability analysis.To realize the visualization analysis of surrounding rock fractures，this paper proposed a three-dimensional （3D） reconstruction method of surrounding rock fractures based on the visualization toolkit （VTK）.Firstly，the collected tunnel surrounding rock images were preprocessed by OpenCV for image grayscale and noise reduction.Secondly，the Otsu method and the open operation in morphology were used to segment the image，and the complete surrounding rock fracture map was obtained.Then，the median method was used to replace the linear interpolation method with the traditional Marching Cubes algorithm in VTK to calculate the equivalent point，and the improved Marching Cubes …

Go to article

Experimental Study On Deformation Characteristics Of High Liquid Limit Soil Considering The Effect Of Temperature, Li Bangwu, Shen Xuning, Zhang Rui, Chen Yanrong Dec 2024

Experimental Study On Deformation Characteristics Of High Liquid Limit Soil Considering The Effect Of Temperature, Li Bangwu, Shen Xuning, Zhang Rui, Chen Yanrong

Journal of China & Foreign Highway

In order to study the influence of temperature on the absorbed bound water and deformation characteristics of high liquid limit soil，the high liquid limit soil in Hunan and Hainan provinces were selected for test.The influence of temperature on the content of bound water was measured by a temperature-controlled water bath volumetric flask test.The consolidation test was carried out on the samples with a one-dimensional temperature-controlled consolidometer，and the variation law of high liquid limit soil deformation affected by temperature was analyzed under the modified pore ratio considering the bound water content.The results show that the absorbed bound water in the high …

Go to article

Surface Grouting Reinforcement Technology For Shallowly Buried Tunnel In Coastal Zone, Xiang Ze, Deng Shiping, Sheng Zhang, Zhou Ye, Wang Wei, Pei Yabing Dec 2024

Surface Grouting Reinforcement Technology For Shallowly Buried Tunnel In Coastal Zone, Xiang Ze, Deng Shiping, Sheng Zhang, Zhou Ye, Wang Wei, Pei Yabing

Journal of China & Foreign Highway

The Ⅵ level surrounding rock section of a project water intake tunnel is located in the coastal zone，with thick overlying sand layers，broken surrounding rock，and other characteristics.To address these issues，laboratory tests were conducted to explore the effect of water glass volume dosing on the final setting time and strength of cement-sodium silicate （CS） liquid slurry，and field tests were carried out for a comprehensive analysis of grouting methods.The constraint-dispersion mode was finally determined to divide the grouting area into several small grouting units.Advance plastic pipe grouting reinforcement was performed according to the grouting sequence of the outermost circle hole interval first，followed by …

Go to article

First Prev Next Last