Civil Engineering Commons^™

Assessment Of Sustainability And Resilience In Transportation Infrastructure Geotechnics, Jasaswee T. Das

Civil Engineering Dissertations - Archive

Transportation infrastructure, such as roads, embankments, bridges, railroads, airports, docks, and canals, serve as pathways for the mobility of people, goods, and services, and form the backbone of cities and communities. The construction, operation, and rehabilitation of these facilities put significant strain on the local, state, and federal agencies, including depletion of natural resources, and contributing to the global carbon footprint and greenhouse gas emissions. Further, these features stimulate anthropocentric development in a region which affects the land-use patterns and influences the demography of communities. In recent years, most transportation infrastructure are typically designed to withstand external and internal disturbances …

Effect Of Polypropylene Fiber Reinforcement On The Consolidation, Swell And Shrinkage Behavior Of Lime Blended Expansive Soil, Arif Ali Baig Moghal, Bhaskar C.S. Chittoori, B. Munwar Basha

Civil Engineering Faculty Publications and Presentations

In this article, synthetic fibers in the presence of lime stabilization are proposed as an alternative to overcome the issues related to shrink-swell distress in expansive soils. Two types of synthetic fibers, Fiber Cast® (FC) and Fiber Mesh® (FM), were studied by conducting one dimensional fixed ring Oedometer swell-consolidation and bar linear shrinkage tests. Three dosages (0.2, 0.4 and 0.6% percent by weight of soil) and two lengths of the fibers (6 and 12 mm) were evaluated with and without lime treatments. The results indicated that FC fibers had better swell restricting performance in the absence of lime treatment, while …

Optimization For The Allocation Of Funds For Pavement Maintenance In Pavement Management Systems, Armando Ramirez

Open Access Theses & Dissertations

Pavement maintenance and rehabilitation are critical and costly elements for highway agencies. A challenge for transportation agencies is to preserve roadways in an appropriate condition and extend the pavement service life while maintaining the safety and satisfaction of its users, and maximize the benefits obtained by the repair investments. Pavement maintenance programming is increasing in complexity due to limited resources and increments in traffic and population. Management decisions are usually based on personal judgment by pavement managers and sometimes those decisions are not even supported by previous experience. Research shows that optimization methods can produce significant benefits when transportation agencies …

Using Historic Pavement Performance Data To Identify And Select Sites For Asphalt Mixture Design Studies, Allyson Richey

Civil Engineering Undergraduate Honors Theses

Since 1997 Arkansas asphalt mixtures have been designed using a procedure commonly known as ‘Superpave’. In a traditional Superpave mix design, the design considers only traditional volumetric parameters; however, recent advances in mix design technology emphasize mixture’s ability to perform in its environment. There are numerous factors which affect the performance characteristics of an asphalt mix. Certainly, the asphalt binder’s performance is a critical variable in this system. Asphalt binders are sensitive to temperature, so much so that their primary parameter on which they are recommended is a function of both temperature and the geographic latitude in which the pavement …

Structural Competency And Environmental Soundness Of The Recycled Base Materials In North Texas, Mohammad Faysal

Civil Engineering Dissertations - Archive

Aggregates, which are derived from natural resources, are the most important raw materials used in pavement construction; however, depletion of the natural resources, increasing labor costs, and environmental concerns have led us to look for alternatives. Recycled materials, such as recycled crushed concrete aggregate (RCCA) and reclaimed asphalt pavement (RAP), can be used as an alternative to natural aggregates and can be obtained from construction of newer structures and demolition of existing structures, such as buildings, bridges, pavement, etc. Recycled materials can reduce the cost, depletion of natural resources, and construction debris. The properties of recycled materials are source-dependent, which …

Evaluation Of Mechanical Parameters Of Contaminated Road Base And Railway Ballast, Prajwol Tamrakar

Open Access Theses & Dissertations

This Dissertation comprises two topics in the area of transportation geotechnics that focus on the evaluation of stiffness parameters of contaminated road base and railway ballast. The abstracts of these two studies are provided in the following two paragraphs.

The performance of a flexible pavement depends on the mechanical characteristics of its unbound granular base layer. The mechanical characteristics such as stiffness and deformation resistance depend on many factors such as the material gradation, fines content, moisture content, physical properties of coarse aggregate and more. The base materials are often contaminated by the excessive fines that is caused by improper …

Exploring The Black Space Of Compressive And Shear Modulus, Airam Marlee Morales Vega

Graduate Theses and Dissertations

Uniaxial dynamic modulus is a standard test used to determine the viscoelastic behavior of asphalt pavement materials, with the standard analysis generating a Master Curve. One alternative to the master curve approach is a Black Space diagram, which is a rheological plot that can delineate either dynamic modulus |E*| or shear modulus |G*| vs. phase angle (δ). In this study, four asphalt binders were tested with one aggregate blend. One of these four binders was unmodified and the other three were modified with polymers and acids. Additionally, Polyphosphoric acid (PPA) is compared to the more traditional SBS polymer modification. PPA …

Effect Of Fiber Reinforcement On Cbr Behavior Of Lime Blended Expansive Soils: Reliability Approach, Arif Ali Baig Moghal, B. Munwar Basha, Bhaskar Chittoori, Mosleh Ali Al-Shamrani

Civil Engineering Faculty Publications and Presentations

Use of synthetic fibers as reinforcement to stabilize expansive soils is gaining momentum. As a contribution towards this growing field of research two different types of synthetic fibers, Fiber Mesh® and Fiber Cast®, were evaluated as a stabilization alternative for expansive soils in the presence of lime. California Bearing Ratio (CBR) is chosen as a performance indicator as it is a good pointer towards pavement effectiveness. Variables such as length and amount of the fibers as well as curing period were studied. Both deterministic and probabilistic (or reliability) analysis is presented in this paper. While the deterministic analysis helps in …

Modeling Long-Term Deformations Of Unbound Pavement Materials Using The Miniaturized Pressuremeter Creep Data, A. M. Shaban, P. J. Consentino

Mechanical and Civil Engineering Faculty Publications

This research was undertaken to study the predictive capability of the pressuremeter test for characterizing in situ creep behavior of unbound pavement layers. Although the creep potential of granular pavement materials is less pronounced than fine-grained soils, consideration of actual creep deformations in the pavement evaluation process will improve long-term pavement performance. In this investigation, the long-term deformations determined from laboratory one-dimensional creep tests were compared with those investigated by field pressuremeter tests. The pressuremeter test consisted of inflating a cylindrical probe incrementally up to a given stress level, and then maintaining the pressure constant for a 5-min single stage. …

Economic Analysis Of Michigan Commercial Vehicle Enforcement Strategies, Randy José Jorge Díaz

Masters Theses

Transportation infrastructure is an essential component of a nation’s success as it allows efficient transportation of goods to all economic markets, providing economic stability and ensuring trade competiveness. Nearly 70 percent of all of Michigan’s freight is shipped by truck and Michigan is ranked eighth in the USA in terms of the value of its exports with $50 billion per year. Unfortunately, commercial vehicles also contribute to the deterioration of pavement, reducing air quality and potentially influencing road safety. To enforce commercial vehicle laws and regulations, most states utilize fixed weigh stations supplemented with other enforcement strategies. Although fixed weigh …

Modeling Pavement Distress Rates Within U.S. Air Force Airfields, Lauren Sahagun

UNLV Theses, Dissertations, Professional Papers, and Capstones

Through the review of Pavement Condition Index (PCI) surveys completed at Air Force installations scattered across the continental United States, pavement engineers at the Air Force Civil Engineer Center propose that the predominant factor contributing to pavement distress development is climate. They suggest that within each pavement distress type (i.e. alligator cracking, rutting, spalling, etc.) a geographic pattern exists that is strongly correlated to the conventional climate zones within the US. Knowledge of these geographic patterns would equip pavement engineers and asset managers with a powerful tool to develop purposeful maintenance strategies specific to each distress type.

The following approach …

Studying The Parameters Involved With Modulus-Based Construction Quality Control For Compaction Of Unbound Pavement Layers, Mehran Mazari

Open Access Theses & Dissertations

Pavement performance is impacted by several factors such as the properties of the materials, combination of traffic and loading, structural capability, climate changes and construction process. Earthwork and unbound materials is an important part of pavement constructions since most of the distresses can be related to these geomaterials. Appropriate process control, proper processing of geomaterials, adequate amount of moisture and suitable compaction effort would ensure the required density and stiffness of the compacted pavement layer. The Nuclear Density Gauge (NDG) has been the primary means of Quality Control and Quality Acceptance (QC/QA) by State Highway Agencies (SHAs) and department of …

A Framework For Coordinating Water Distribution System And Pavement Infrastructure M&R Based On Lcca, Majed Fedhi Alinizzi

Open Access Theses

The disruptions the public faces daily around the world due to urban infrastructure Maintenance and Rehabilitation (M&R) activities are having significant social, economic, and environment impacts on communities. With respect to water distribution systems, there have been millions of water main breaks in the U.S. since January 2000, with an average of nearly 700 water main breaks every day. The majority of these water utilities lie under paved roads, and the Open Cut method is the most widely used technology for repairing water main breakages. Subsequently, this continually increasing pipe breakage requires the destruction of pavements that may be in …

Network- Level Pavement Performance And Management Study In Connecticut, Ramandeep S. Josen

Master's Theses

This thesis presents the analysis of asphalt pavement cracking data on the network level in Connecticut. Pavement performance indicators including longitudinal and transverse cracking as well as roughness are investigated with respect to numerous distinct factors that can be grouped into three categories, i.e. climatic-, pavement structure-, and traffic-related. High-quality climatic data was obtained from the national weather stations in Connecticut. Maintenance and construction data was used to determine the pavement age and structure amongst several other factors. Traffic data was acquired from the state records and accumulated traffic loading was estimated for all segments based on their age. High …

Laboratory And Field Evaluation Of Two Warm-Mix Additives In Connecticut And Validation Of An Alternative Moisture Susceptibility Test, Alexander K. Bernier

Master's Theses

The first official state Warm-Mix Asphalt (WMA) pavement project in Connecticut was constructed between July 20th and 22nd, 2010 and it involved three experimental sections, i.e. one section with a conventional HMA (control section) and two WMA sections with different technologies, wax and foamed asphalt. All three sections are located on Route 70 in central Connecticut. The materials were collected in loose form and reheated and compacted in laboratory conditions (laboratory fabricated specimens). This paper discusses the effect of mix type on the results from several tests conducted in the laboratory, such as Semi-Circular Bending, Hamburg Wheel Tracking, Indirect Tensile, …

Tolerance Limit For Trucks With Excess Load In Transport Regulation In Indonesia, Sigit Pranowo Hadiwardoyo, Raden Jachrizal Sumabrata, Mohammed Ali Berawi

Makara Journal of Technology

Reliability of a road is mandatory since damaged will impede the traffic. Destruction is caused by various factors; one of the most important factors is excess load. Overload may give the load of each axle of a vehicle exceeds the determined standard. This condition occurs in trucks exceeding the load limit. In designing the structure of a road based on the method of Directorate General of Highways Ministry of Public Works of the Republic of Indonesia, axle load calculated in equivalent-number, or known as equivalent axle load (EAL), of 8.16 tons of standard axle. Total equivalent-number over the service life …

Influence Of Recycled Asphalt Shingles On Asphalt Binder Content, Mixture Stiffness, And Laboratory Rutting Performance, Joshua David King

Graduate Theses and Dissertations

Recycled asphalt shingles (RAS) is a technology in which pavement costs can be reduced significantly and pavement properties may be enhanced. Also, incorporating shingles into pavements reduces the impacts of waste shingles in landfills, preserving our environment. However, for this new technology to be practical for implementation, a better understanding of how the ground shingles affect the properties of the asphalt is necessary. The purpose of this research was to examine the effects of recycled asphalt shingles on asphalt binder content, mixture stiffness, and laboratory rutting performance. For this project, shingles were added to hot mix asphalt mixtures at 2.5, …

Gis Based Pavement Maintenance: A Systematic Approach, Robert J. Kmetz

Purdue Polytechnic Directed Projects

Abstract

According to 2008 Federal Highway Administration (FHWA) statistics, there are 2,734,102 miles of paved public roads in the United Sates, with an additional 1,324,245 miles of unpaved public roads.  Road conditions deteriorate with time as the result of weather effects, deicing salts, and vehicle loads.  The most common pavement distress includes cracking, rutting, and potholes.  These pavement defects must be repaired to restore the pavement to a satisfactory service level for road users. According to the FHWA, in 2006 approximately $54.2 billion dollars was spent on maintenance and expansion, just on U.S. highways alone.

Routine maintenance is a cost …

Long-Term Performance Of Pavement Markings On Primary And Secondary Roads, Joshua Johnson

All Theses

This research analyzes waterbased and thermoplastic pavement markings on primary and secondary roads in South Carolina. The primary objective of this research was to develop retroreflectivity degradation models for these two pavement marking materials, as well as determine the expected useful life of the markings. Predicting retroreflectivity and marking life is important so that state DOTs may efficiently replace markings in order to reduce safety hazards as well as maintenance costs.
Data collection for this research lasted 21 months, where retroreflectivity of pavement markings was measured on over 100 primary and secondary roads in South Carolina. Variables such as marking …

A Tool To Improve And Preserve Flexible Pavement At Intersections, Carlos Jesus Solis

Open Access Theses & Dissertations

Rural intersections originally constructed with thin untreated flexible base and hot mix or a two-course surface treatment tend to experience severe pushing, shoving and rutting. These failures cause an extremely rough surface that can cause damage to small vehicles and potentially cause motorists to lose control of their vehicles. These distresses almost always result in complete failure of the existing pavement that must be repaired several times during the life of the roadway by maintenance forces. In most cases, pavements constructed with the same materials and cross-sections adjacent to the intersection perform adequately.

The sources of and solutions for failure …

Automated Pavement Condition Data Collection Quality Control, Quality Assurance, And Reliability, Ghim Ping (Raymond) Ong, Samy Noureldin, Kumares C. Sinha

JTRP Technical Reports

In recent years, state highway agencies have come to understand the need for high quality pavement condition data at both the project and network levels. At the same time, agencies also realize that they have become too dependent on contractors to ensure the quality of the delivered data without any means to independently assure the quality of these delivered data. This research study therefore aims to investigate the inherent variability of the automated data collection processes and proposes guidelines for an automated data collection quality management program in Indiana. In particular, pavement roughness data (in terms of IRI) and pavement …

Total Storm Management Manual, Indiana Department Of Transportation

JTRP Other Publications and Reports

No abstract provided.

Effects Of Aggregate Angularity On Mix Design Characteristics And Pavement Performance, Yong-Rak Kim, Leonardo T. Souza

Mid-America Transportation Center: Final Reports and Technical Briefs

This research targeted two primary purposes: to estimate current aggregate angularity test methods and to evaluate current aggregate angularity requirements in the Nebraska asphalt mixture/pavement specification. To meet the first research objective, various aggregate angularity tests were estimated with the same sets of aggregates and were compared by investigating their characteristics on testing repeatability, cost, testing time, workability, and sensitivity of test results. For the second objective, the effect of aggregate angularity on mixture performance was investigated by conducting laboratory performance tests (the uniaxial static creep test and the indirect tensile fracture energy test) of five mixes designed with different …

Performance Related Specifications (Prs) For Concrete Pavements In Indiana, Volume 1: Executive Summary, Cole Graveen, Eric Max Falker, Micah Beaver, Narayanan Neithalath, W. Jason Weiss, J. Olek, Tommy Edward Nantung, Victor Lee Gallivan

JTRP Technical Reports

Performance-Related Specifications (PRS) are specifications that base pavement acceptance and pay adjustment on the projected performance and predicted life-cycle cost (LCC) for a specific pavement. PRS relate measurable quality characteristics with pavement performance through computer simulations that incorporate physical distress models. Previously, work at ERES consultants by Darter and co-workers developed prototype PRS for jointed plain portland cement concrete pavements (PCC) through Federal Highway Administration (FHWA) through a series of research projects. However, before this research program began, pavements have not been constructed using these specifications. This report describes the Indiana Department of Transportation’s (INDOT) experience with developing and implementing …

Performance Related Specifications (Prs) For Concrete Pavements In Indiana, Volume 2: Technical Report, Cole Graveen, Eric Max Falker, Micah Beaver, Narayanan Neithalath, W. Jason Weiss, J. Olek, Tommy Edward Nantung, Victor Lee Gallivan

JTRP Technical Reports

Performance-Related Specifications (PRS) are specifications that base pavement acceptance and pay adjustment on the projected performance and predicted life-cycle cost (LCC) for a specific pavement. PRS relate measurable quality characteristics with pavement performance through computer simulations that incorporate physical distress models. Previously, work at ERES consultants by Darter and co-workers developed prototype PRS for jointed plain portland cement concrete pavements (PCC) through Federal Highway Administration (FHWA) through a series of research projects. However, before this research program began, pavements have not been constructed using these specifications. This report describes the Indiana Department of Transportation’s (INDOT) experience with developing and implementing …

Saw-Cutting Guidelines For Concrete Pavements: Examining The Requirements For Time And Depth Of Saw-Cutting, Kambiz Raoufi, Tony Their, W. Jason Weiss, Jan Olek, Tommy E. Nantung

JTRP Technical Reports

Joints are placed in Portland cement concrete pavements (PCCP) to control random cracking. These joints provide a weakened plane that enables a crack to form in a controlled manner, relieving residual stresses that develop when thermal, hygral, or hydration movements are resisted by sub grade and adjoining pavement. While the concept of creating a weakened plane through saw-cutting is straightforward, determining the time and depth of the saw-cut has proven to be complicated. The goal of this project was to reduce the risk for joint raveling and random cracking. Specifically, this project has focused on: developing a procedure for determining …

Investigation Of Asphalt Pavement Analyzer Testing Program In Nebraska, Minki Hong, Yong-Rak Kim

Mid-America Transportation Center: Final Reports and Technical Briefs

The asphalt pavement analyzer (APA) has been widely used to evaluate hot-mix asphalt (HMA) rutting potential in mix design and quality control – quality assurance (QC-QA) applications, because the APA testing and its data analyses are relatively simple, rapid, and easy. However, as demonstrated in many studies and also experienced by the state of Nebraska, the APA testing is in question due to its high testing variability and a lack of sufficient correlation with actual filed performance. The primary objective of this research was to find critical materials and/or mixture design factors affecting APA test results so as to eventually …

Pavement Quality Indicators Study, Wayne Jensen Ph.D., Cody Kluver

Mid-America Transportation Center: Final Reports and Technical Briefs

The Nebraska Department of Roads (NDOR) conducts annual examinations of the Nebraska’s interstate and federal high-way pavements. During these examinations, numerous indicators of pavement quality are measured directly or are com-piled from parameters recorded by a vehicle passing over the pavement section. Parameters are documented and analyzed for each one-tenth mile segment. A number of pavement sections where innovative features have been incorporated were selected by the NDOR for comparison to nearby conventional pavement sections. This study used data recorded by the NDOR as well as field observations to develop a comparison between two pavement sections, one with innovative fea-tures …

Hot In Place Asphalt Recycling (Hipar), Purdue Ect Team

ECT Fact Sheets Archive

With limited funds destined to highway maintenance, the need to repair and maintain highways at the lowest cost possible has created a need for cost-effective ways to rehabilitate existing pavements in preference of reconstruction. Hot-In-Place-Asphalt-Recycling is defined as a process of correcting asphalt pavement surface distress by softening the existing surface with heat, mechanically removing the pavement surface, mixing with recycling agent, possibly adding virgin asphalt and/or aggregate and replace it on the pavement without removing the recycled material from the original pavement site.

Superpave System, Purdue Ect Team

ECT Fact Sheets Archive

The Superpave is the acronym for 'SUperior PERforming Asphalt PAVEments' system. It was developed by Strategic Highway Research Program (SHRP) to give highway engineers and contractors the tools they need to design asphalt pavements that will perform better under extremes of temperature and heavy traffic loads.