Civil Engineering Commons^™

Water Resources Systems Analysis - University Of Texas San Antonio, Marcio Giacomoni

All ECSTATIC Materials

Systems Analysis methods use algorithmic and mathematical approaches for problem-solving. These are powerful methods that can be applied to solve complex design and management problems for water resources systems and other engineering areas. This class will focus on optimization methods, such as linear programming, integer programming, nonlinear programming, genetic algorithms, and dynamic programming, and their application to water resources systems. Advanced Systems Analysis methods, including sensitivity analysis, alternatives generation, and multi-objective optimization will be introduced to address the complexities associated with public sector decision-making. Course taught at University of Texas San Antonio.

Environmental Systems Analysis - Hong Kong University Of Science And Technology, Hong Kong, Ng Tze Ling

All ECSTATIC Materials

Undergraduate course in environmental systems analysis offered at Hong Kong University of Science and Technology, Hong Kong in Fall 2015.

Water Resources Systems Analysis - Colorado State University, Darrell Fontane

All ECSTATIC Materials

Applications of systems analysis, simulation and optimization techniques in water resources planning and management. Course taught at Colorado State University.

Energy And Exergy Analysis Of Kalina Cycle For The Utilization Of Waste Heat In Brine Water For Indonesian Geothermal Field, Nasruddin Nasruddin, Agus Noor Sidiq, Abdulmajeed Mohamad, Rama Usvika

Makara Journal of Technology

The utilization of waste heat in a power plant system—which would otherwise be released back to the environment—in order to produce additional power increases the efficiency of the system itself. The purpose of this study is to present an energy and exergy analysis of Kalina Cycle System (KCS) 11, which is proposed to be utilized to generate additional electric power from the waste heat contained in geothermal brine water available in the Lahendong Geothermal power plant site in North Sulawesi, Indonesia. A modeling application on energy and exergy system is used to study the design of thermal system which uses …

Optimal Pavement Design And Rehabilitation Planning Using A Mechanistic-Empirical Approach, Yun Bai, Osman Erman Gungor, Jaime Alberto Hernandez-Urrea, Yanfeng Ouyang, Imad L. Al-Qadi

Civil and Environmental Engineering Faculty Research and Publications

This paper presents the development of a pavement design and rehabilitation optimization decision-making framework based on Mechanistic-Empirical (ME) roughness transfer models. The AASHTOWare Pavement ME Design (the software of Pavement ME Design) is used to estimate pavement deterioration based on the combined effects of permanent deformation, fatigue, and thermal cracking. The optimization problem is first formulated into a mixed-integer nonlinear programming model to address the predominant trade-off between agency and user costs. To deal with the complexity associated with the pavement roughness transfer functions in the software and to use the roughness values as input to the optimization framework, a …

Determination Of Explosive Energy Partition Values In Rock Blasting Through Small-Scale Testing, Joshua Calnan

Theses and Dissertations--Mining Engineering

Blasting is a critical part of most mining operations. The primary function of blasting is to fragment and move rock. For decades, attempts have been made at increasing the efficiency of blasting to reduce costs and increase production. Most of these attempts involve trial and error techniques that focus on changing a single output. These techniques are costly and time consuming and it has been shown that as one output is optimized other outputs move away from their optimum level. To truly optimize a blasting program, the transfer of explosive energy into individual components must be quantified. Explosive energy is …

Make Or Buy Analysis Model Based On Tolerance Design To Minimize Manufacturing Cost And Quality Loss, Cucuk Nur Rosyidi, Reza Rizkichani Akbar, Wakhid Ahmad Jauhari

Makara Journal of Technology

In a manufacturing company, manufacturing costs, or component prices, and tolerance will affect the price and the quality of a product. Companies must produce high-quality products with low manufacturing costs in order to keep their products competitive in the market; however, it is difficult to produce a high-quality product with a low manufacturing cost. Companies have difficulties in determining the components to be produced using their own manufacturing facilities (make) or outsourced to their suppliers (buy). Hence, a make or buy analysis is needed to minimize the manufacturing costs and quality loss and to determine the optimum alternative regarding make …

Stormwater Infrastructure Optimization On Conjunctive Improvements, Mohammad Hussin Shar

Civil & Environmental Engineering Theses & Dissertations

The studied drainage system is located in the downtown of the City of Newport News, in a basin known as Anderson Park. The drainage system collects and conveys rainfall runoffs to the system outfall located at the shoreline of the Hampton Roads body of water, which is located south of the study area. The aim of this study is to analyze the area's drainage system, determine maximum capacities, identify system deficiencies and generate the most possible, practical and economical solution for fixing the system deficiencies.

After collecting all of required data, the drainage system was modeled and calibrated using the …

Cost And Embodied Energy Optimization Of Rectangular Reinforced Concrete Beams, Alexander Kosloski

All Theses

Concrete has a large environmental footprint so it is desirable to find ways to efficiently design structural members. Engineers can exercise their abilities early on in the design phase of construction projects to reduce the environmental footprint by minimizing the amount of materials required. One way to achieve these results is to optimize the design of structural concrete. In this study, simple-span rectangular reinforced concrete (RC) beams with a range of different bending moments were analyzed. The primary goal was to combine life cycle analysis (LCA), numerical optimization, and reinforced concrete mechanics to create a framework for designing efficient RC …

Predictive Maturity Of Inexact And Uncertain Strongly Coupled Numerical Models, Ismail Farajpour

All Dissertations

The Computer simulations are commonly used to predict the response of complex systems in many branches of engineering and science. These computer simulations involve the theoretical foundation, numerical modeling and supporting experimental data, all of which contain their associated errors. Furthermore, real-world problems are generally complex in nature, in which each phenomenon is described by the respective constituent models representing different physics and/or scales. The interactions between such constituents are typically complex in nature, such that the outputs of a particular constituent may be the inputs for one or more constituents. Thus, the natural question then arises concerning the validity …

Environmental Systems Modeling And Management - University Of Virginia, Charlottesville, Teresa Culver

All ECSTATIC Materials

Grad/Undergrad course in environmental systems modeling and management offered at University of Virginia, Charlottesville in Fall 2013.

Deterministic Optimization And Design - University Of California, Davis, Jay R. Lund

All ECSTATIC Materials

Undergraduate course in deterministic optimization and design offered at U.C. Davis.

A Real-Time Crane Service Scheduling Decision Support System (Css-Dss) For Construction Tower Cranes, Amir Tork

Electronic Theses and Dissertations

The success of construction projects depends on proper use of construction equipment and machinery to a great extent. Thus, appropriate planning and control of the activities that rely on construction equipment could have significant effects on improving the efficiency of project operations. Cranes are the largest and most conspicuous construction equipment, widely used in typical construction sites. They play a major role in relocation of materials in horizontal and vertical directions on construction sites. Given the nature of activities relying on construction cranes in various stages of a project, cranes normally have control over the critical path of the project …

Optimization Of Stress Wave-Based Nondestructive Methods In Identifying Deterioration In Concrete Structures, Hoda Azari

Open Access Theses & Dissertations

The transportation infrastructure across the United States is deteriorating and requires periodic inspection to predict the cost of repair and extent of maintenance activities, to remedy structural problems, and to ensure safety and serviceability. The use of nondestructive testing (NDT) methods in detecting and characterizing flaws in the infrastructure has become more common. Among different NDT methods, the stress wave-based methods, including ultrasonic surface waves (USW) and impact echo (IE) methods, are widely used to maintain concrete structures. In this dissertation, a complete literature review of seismic wave theory and wave propagation in plate like structures, and stress wave-based methods …

Environmental Implications Of Pavements: A Life Cycle View, Bin Yu

USF Tampa Graduate Theses and Dissertations

Environmental aspect of pavement, unlike its economic counterpart, is seldom considered in the theoretical study and field practices. As a highly energy and material intensive infrastructure, pavement has great potential to contribute to the environment protection, which, in root, depends on the in-depth understanding of the environmental impacts, holistically and specifically. A life cycle assessment (LCA) model is used to fulfill the goal.

This research firstly carried out extensive literature review of LCA studies on pavement to identify the major research gaps, including: incompleteness of the methodology, controversy of the functional unit, and unawareness of feedstock energy of asphalt, etc. …

Optimizing Fermentation Medium To Produce Cyclosporin A Using Response Surface Methodology, Rofiq Sunaryanto

Makara Journal of Technology

Response surface methodology (RSM) is a three factorial model which illustrates the relationship between one or more independent variables. RSM can be used to optimize the fermentation medium for the production of Cyclosporin A from the isolate Tolypocladium inflatum. The optimal point of the response surface area is predicted by using a seconddegree polynomial model and applying the statistic model obtained from the central composite design (CCD). The results of optimizing the fermentation medium for Cyclopsorin using the three independent variables of glucose, casein, and KH2PO4 show that all three of the independent variables affect the production of Cyclosporin A. …

Natural Gas As Petroleum Fuel Substitution: Analysis Of Supply-Demand Projections, Infrastructures, Investments And End-User Prices, Abdul Qoyum Tjandranegara, Arsegianto Arsegianto, Widodo Wahyu Purwanto

Makara Journal of Technology

The petroleum fuels (PF) subsidy has long burdens the government spending, and discourages less expensive energy usage such as natural gas (NG). Exporting NG and importing the more expensive PF products cause financial losses to Indonesia. The lack of NG infrastructure is the main hurdle in maximizing domestic NG usage and so does the perception of its high investment costs burdening government spending and pushing the NG transportation cost up. This study calculates the required NG infrastructure and its investments for several levels of PF substitutions up to 2030. To balance the NG demands, the supply from each field and …

Comparison Of The Properties Of Portland Cement And Portland-Limestone Cement, Alex Lyatonga Mrema

Tanzania Journal of Engineering and Technology (TJET)

A study was made in a cement factory in Dar es Salaam, Tanzania, where Ordinary Portland Cement (CEM I 42.5N) and Portland-limestone cement (PLC) which has the brand name Twiga Cement Extra (CEM II/A-L/32.5R) are produced and conforming to the Tanzania Standard TZS 727 (Part1): 2002, which is equivalent to EN 197 published by the committee for European normalization (CEN). A comparison was made between the two types of cements in terms of physical, chemical and mechanical properties. It was found out that they all complied with the standards, that there was no significant difference in their setting times and …

Expanding Horizons With Chameleon: Team Missouri's Innovative Home Automation System, Bryan Glass, Ben Brannon, Katie Grantham, Stuart Werner Baur

Engineering Management and Systems Engineering Faculty Research & Creative Works

Team Missouri's 2009 Solar Decathlon entry featured a revolutionary home automation system, Chameleon, promoting both convenience and energy savings. This was accomplished using the typical controls of a convenience based automation system, while maintaining user set points, such as a home's ambient temperature, in the most energy efficient manner. Environmental features of the system include controls for home heating, ventilation and air conditioning, lighting, windows, shades, appliances, indoor air quality, as well as indoor and outdoor irrigation. Further analysis and refinement to the prototype system displayed at the competition is also presented in this paper.

Optimizing Integrated Service For A Transit Route With Heterogeneous Demand, Yavuz Yusuf Ulusoy

Dissertations

The methodology developed in this dissertation attempts to optimize integrated service that minimizes the total cost, including user and supplier costs, of a transit route with heterogeneous demand. While minimizing total cost, a set of practical constraints, such as capacity, operable fleet size and frequency conservation, are considered.

The research problem is presented in three scenarios, consisting of various service patterns (e.g., all-stop, short-turn and express) under heterogeneous demand. A logit-based model was used to estimate passenger transfer demand. An exhaustive search method was developed to find the optimal solutions for a simplified transit route with six stops, and a …

Indiana Pavement Preservation Program, Ghim Ping (Raymond) Ong, Tommy E. Nantung, Kumares C. Sinha

JTRP Technical Reports

State highway agencies are facing immense pressure to maintain roads at acceptable levels amidst the challenging financial and economic situations. In recent years, pavement preservation has been sought as a potential alternative for managing the pavement assets, believing that it would provide a cost-effective solution in maintaining infrastructural conditions and meeting user expectations. This study explores the potential of pavement preservation concepts in managing the agency‘s pavement assets by attempting to integrate pavement preservation considerations within the network-level pavement management system. Several elements are studied in the report: (i) determining triggers for pavement preservation treatments for use in a PMS, …

Synthesis Of Optimal Usage Of Available Aggregates In Highway Construction And Maintenance, Benjamin Skidmore

All Theses

The optimization of the available aggregates for highway construction and maintenance is vital both from an economic and environmental perspective. By not optimizing the aggregate supply project costs escalate as a simple response to supply and demand, and just as important the fact that aggregate is a natural resource and a limited one, it is crucial that is used as efficiently as possible. This paper examines specifically the use of aggregates by the South Carolina Department of Transportation, but can easily be adapted to any state. Through DOT and quarry surveys and an examination of aggregate gradation specifications it was …

Hurricane Evacuation: Origin, Route And Destination, Vinayak Dixit

Electronic Theses and Dissertations

Recent natural disasters have highlighted the need to evacuate people as quickly as possible. During hurricane Rita in 2005, people were stuck in queue buildups and large scale congestions, due to improper use of capacity, planning and inadequate response to vehicle breakdown, flooding and accidents. Every minute is precious in situation of such disaster scenarios. Understanding evacuation demand loading is an essential part of any evacuation planning. One of the factors often understood to effect evacuation, but not modeled has been the effect of a previous hurricane. This has also been termed as the 'Katrina Effect', where, due to the …

Multiobjective Plan Selection Optimization For Traffic Responsive Control, Montasir M. Abbas, Anuj Sharma

Department of Civil and Environmental Engineering: Faculty Publications

Optimal coordination of traffic signals requires proper activation of timing plans to match current traffic conditions. One of the greatest challenges in configuring a traffic responsive plan selection control mode is how to select only n number of timing plans (restricted by traffic controller memory limitations) to address possibly all traffic conditions/states that can be encountered in the field, for a specific site, but most importantly, how to associate each of these traffic conditions to one of the n timing plans stored in the traffic controller. This paper uses a multiobjective non-dominated sorting genetic algorithm to (1) select the best …

Optimization Of An Unstructured Finite Element Mesh For Tide And Storm Surge Modeling Applications In The Western North Atlantic Ocean, Satoshi Kojima

Electronic Theses and Dissertations

Recently, a highly resolved, finite element mesh was developed for the purpose of performing hydrodynamic calculations in the Western North Atlantic Tidal (WNAT) model domain. The WNAT model domain consists of the Gulf of Mexico, the Caribbean Sea, and the entire portion of the North Atlantic Ocean found west of the 60° W meridian. This high resolution mesh (333K) employs 332,582 computational nodes and 647,018 triangular elements to provide approximately 1.0 to 25 km node spacing. In the previous work, the 333K mesh was applied in a Localized Truncation Error Analysis (LTEA) to produce nodal density requirements for the WNAT …

Water Resources Systems Analysis - Course Notes, A Bruce Bishop, Trevor Hughes, Mac Mckee

All ECSTATIC Materials

Water resources systems analysis course notes for CEE 6410 taught at Utah State University. Coverage includes:

Chapter 1 - Concepts and methods

Chapter 2 - Linear programming-introduction and graphical methods

Chapter 3 - Linear programming - simplex method

Chapter 4 - Linear programming - applications to simple water problems

Chapter 5 - Dual LP and post optimality analysis

Chapter 6 - Integer programming

Chapter 7 - More applications of integer programmign

Chapter 8 - Piecewise linearization

Chapter 9 - Other types of LP models

Chapter 10 - Dynamic programming

Chapter 11 - Gradient-based nonlinear optimization methods

Chapter 12 - Genetic …

Optimum Geometrical Parameters For Prismatic Folded Plate Roofs: System- Atic Search Approach, N Mwitta

Tanzania Journal of Engineering and Technology (TJET)

Folded plate structures have unique structural advantages over conven- nonal beam-and-slab structural forms. Selection of optimum geometrical parameters in design would make folded plate roofs more appealing to the national construction industry in terms ofcost. This paper presents a study on shape optimization of prismatic folded plate roofs for minimum weight of the structure per unit covered area. A computer based systematic search approach has been employed.for the optimization study, while the tranyeer matrix method has been used for analysis. Curves opriinum geometrical parameters versus span have been pre sented for three commonly used shapes of prismatic folded plate roofs. …

The Computer Aided System For Planning Efficient Routes, J. R. Wright

JTRP Technical Reports

The Indiana Department of Transportation has sponsored the design and implementation of a decision support system for routing highway maintenance vehicles – the Computer Aided System for Planning Efficient Routes (CASPER). Designed for solving multiobjective route design problems, CASPER has been used by agency personnel to design routes for winter maintenance vehicles with significant results: cost savings of more than $9-million to the State of Indiana through more efficient use of materials, equipment, and personnel, while at the same time significant improvement in overall level of network and public service. CASPER integrates 1: an extensive spatial network database (GIS/CAD), 2) …

Implementation Of The Indiana Bridge Management System, User's Manual, Lisa Chow Gion, Justin Gough, Jeffrey Dunn Vitale, Kumares C. Sinha, Robert E. Woods

JTRP Technical Reports

This report provides a user's manual for the implementation of the project evaluation and program development part of the Indiana Bridge Management System (IBMS). The tools and techniques found in these programs were primarily developed from previous research by the Joint Highway Research Project at purdue University. The IBMS runs on an IBM-compatible computer under 05/2.

The Hydraulic Performance Of A Vortex Tube Foector, F Mtaro

Tanzania Journal of Engineering and Technology (TJET)

The vorle.r tube silt exrrac/or consists of a pipe, rhe crest of which has a slit and lies flush across lhe canal bed.With minimal warer loss, I.oe bedload is extracted through lhe slil settling canal back ro the river, thus reducing or eliminating the bedload transported in main canal. Ihe resulting swirling flow phenomena is of complex nature and depends on sc conirol paramerers, as a result of which previous empirical design approaches have yielded conflicting guidelines. By means Of a simplified hydraulic system, the flow mechanism and energy in rhe can be determined.