Civil Engineering Commons^™

Iconic Henry Street Bridge In Indianapolis, Marshall Lachecki, Keith Echternach, Mary Appel

Purdue Road School

The iconic new Henry Street bridge over the White River in Indianapolis is a connection to the west side of downtown Indy.  From the challenging hydraulics requirements to the bridge concepts, design, procurement and through construction and archaeology work, the City has worked with many stakeholders and the public to make this new crossing a success.  This presentation will focus on design elements of the bridge while touching upon other project elements.

Optimizing Indigenous Timber Short-Gap Crossing Designs By Minimizing Wood Moisture Content, Robert Greenwood

Graduate Theses and Dissertations

Reducing moisture content increases wood strength and reduces the weight of timber members. An accurate and efficient method for measuring moisture content is important for the design and construction of indigenous timber short-gap crossings. This study evaluates different methods for measuring moisture content in timber, describes a methodology for developing a representative moisture content value for a timber log, and approaches for quickly drying large timber logs. The results of this thesis will support activities in developing a representative moisture content of a log for structural design purposes and reducing weight for constructability purposes. The approaches discussed were developed considering …

Rapid Construction Of Short Gap Crossings Using Indigenous Timber, Jack Everett Hamburger

Graduate Theses and Dissertations

This thesis examines multiple design options for constructing short span crossings for the military using indigenous timbers. Using indigenous timbers allows for a significant reduction in resources that must be brought into a site for construction. Construction time is minimized by optimizing the steps to convert indigenous timber into structural members for use as timbers in a short gap crossing. A major objective during this thesis study was to examine approaches for maximizing timber strength for design purposes and reduce timber weight for handling purposes. Wood strength and wood weight are highly dependent on moisture content. Decreasing moisture content addresses …

Remote Vibration Based Monitoring Of Bridge Scour, Alan Kazemian

Dissertations

The gradual erosion of the sediment around a bridge foundation is called Scour. This erosion is caused by water flow and increases during times of high-water flow such as flooding. The scour leaves the bridges structurally unsound over time and jeopardizes the safety of the structure. Approximately 60 percent of bridge failures in the United States are caused by scour. A variety of types of devices have been used to detect scour. Most of these devices only observe the scour and not the structural integrity of the bridge. The typical approach has relied on visual inspections of the bridges after …

Load Determination, Strengthening, And Behavior Study Of Prestressed Concrete Channel Bridge Girders In South Carolina, Elhussien Khaled Elbatanouny

Theses and Dissertations

The South Carolina Department of Transportation (SCDOT) is currently engaged in a multi-year effort to assess the structural integrity of its inventory of over 9,000 bridges. This assessment process is expected to result in an increase in the number of bridges that require load postings, repairs, or replacements across South Carolina. This could potentially lead to adverse economic repercussions due to restricted truck routes, bridge closures, repair work, and the need for bridge replacements. To alleviate the escalating costs associated with these challenges, it is imperative to explore methods aimed at reducing the need for load postings and bridge closures …

A Physical Model Of Deadmans Run, Quinn Brandt

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

A physical model of Deadmans Run and a pair of railroad bridges was constructed to assess the impacts of the bridges on flood flows. Lower Platte South Natural Resources District is planning a series of improvements to Deadmans Run to improve flood conveyance capacity and remove approximately 500 homes and businesses from the floodplain. The rail bridges are located less than a mile from the confluence of Deadmans Run and Salt Creek, meaning the bridges present a significant bottleneck to the planned improvements. The physical model was used to characterize the drag effects caused by the bridges, which was used …

Bridge Prioritization And Preservation Along Route 66, Sarah Ballard

Open Access Theses & Dissertations

Eligible bridges around the United States receive federal funding every year for replacement or rehabilitation. The main criterion for allocation of this funding is based on engineering aspects (e.g., life safety, condition, functionality), often leaving the historical value of the bridge at the bottom of the importance level. One of the main historical roads known in America is Route 66, also known as the â??Mother Road.â?? This route was the road to opportunity in the 1930s. Many bridges with historical significance carry the route and represent an integral part of the history of the Mother Road. This research analyzes bridges …

An Analysis Of A Hybrid Steel Bridge, Andrew Iglehart

Mahurin Honors College Capstone Experience/Thesis Projects

The American Institute of Steel Construction hosts a competition for graduating college seniors each year. The competition is designing and fabricating a scaled steel bridge within certain parameters. Each year the parameters change to allow different seniors to face similar challenges without copying the previous year’s work. Before the outbreak of COVID-19, a bridge was fabricated as per the rules in the 2020, and the same bridge was used for the 2021 competition. With a bridge already fabricated and being used for the competition, a question arose about analyzing the bridge.

This thesis encompasses the entire analysis of the steel …

Studies On Tornado-Structure Interactions And Guidance On Design Tornadic Wind Loading, Zhi Li

Doctoral Dissertations

“Tornadoes are violent natural hazards that could caused significant property loss and fatalities. Statistical data indicates that most fatalities during tornado incidents were caused by the building failure under tornadoes. For example, in the 2011 Joplin Tornado, 161 people were killed, and 84 percent of the fatalities were related to the failure of buildings. In addition, most of the significant, tornado-induced property loss and fatalities are relevant to the tornadoes passing through the densely populated regions. Besides buildings, bridges were also severely damaged or destroyed by tornadoes in the United States. To reduce the tornado-induced loss, it is imperative to …

Load Truncation Approach For Development Of Live Load Factors For Bridge Rating, Sasan Siavashi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

Various local governments have developed state-specific vehicular live load factors for bridge rating. However, a significant computational demand is often associated with such an effort. This is due to the large size of the weigh-in-motion (WIM) databases frequently used in the procedure. In this study, a method is proposed that can significantly reduce the computational cost of the analysis, while still maintaining reasonable accuracy. The proposed approach develops approximate live load random variable statistics by truncating the WIM database based on gross vehicle weight, then a complete reliability analysis is conducted to develop new live load factors that meet AASHTO-specified …

Steel Bridge Truss Analysis, Alastair Seed

Williams Honors College, Honors Research Projects

The purpose of this project is to conduct a study comparing the effectiveness of different cross frame orientations in lowering the deflection of the main stringers of a bridge. Three different orientations of cross frames were researched; vertical, angled with the superstructure webbing, and halfway-angled. All of these were studied when the stringers were placed directly under the superstructure and when the superstructure was placed outside of the stringers. Analysis was performed in a program called SAP 2000 to find the deflections along the stringers under different loading conditions. The results showed that when the superstructure was oriented over the …

A Practitioner’S Guide To Small Unmanned Aerial Systems For Bridge Inspection, Sattar Dorafshan, Robert J. Thomas, Calvin Coopmans, Marc Maguire

Electrical and Computer Engineering Faculty Publications

Small unmanned aerial system(s) (sUAS) are rapidly emerging as a practical means of performing bridge inspections. Under the right condition, sUAS assisted inspections can be safer, faster, and less costly than manned inspections. Many Departments of Transportation in the United States are in the early stages of adopting this emerging technology. However, definitive guidelines for the selection of equipment for various types of bridge inspections or for the possible challenges during sUAS assisted inspections are absent. Given the large investments of time and capital associated with deploying a sUAS assisted bridge inspection program, a synthesis of authors experiences will be …

Uhpc Shear Keys In Concrete Bridge Superstructures, Craig Newtson, Brad Weldon, Elsy Flores, Jordan Varbel, William Toledo

Data

Corresponding data set for Tran-SET Project No. 18CNMS01. Abstract of the final report is stated below for reference:

"This research investigated the use of locally produced ultra-high performance concrete (UHPC) as a grouting material to repair deteriorated shear keys. Shear keys are used in adjacent girder superstructures to produce monolithic behavior and load transfer across the structure. Shear key durability is a concern since shear key degradation can jeopardize the integrity of the structure. Transportation agencies have reported that 75% of distress in adjacent girder bridges is due to cracking and de-bonding along shear keys. Previous research has shown that …

Structural Vulnerability Of Coastal Bridges Under Extreme Hurricane Conditions, Arturo Montoya, Adolfo Matamoros, Firat Testik, Reza Nasouri, Adnan Shahriar, Arsalan Majlesi

Data

Corresponding data set for Tran-SET Project No. 18STTSA04. Abstract of the final report is stated below for reference:

"This work presents the results of a numerical study evaluating the response of coastal bridges due to hurricane-induced waves. The analyses were conducted using the Coupled Eulerian-Lagrangian (CEL) approach, available on the commercial finite element software Abaqus, which allows modeling the interaction between water and the bridge. The work concentrated on (1) establishing an approach for modeling the desired wave characteristics (i.e., wave height, and frequency) within the CEL simulation, (2) conducting simulations using actual bridge dimensions of historically damaged bridges, (3) …

Uhpc Shear Keys In Concrete Bridge Superstructures, Craig Newtson, Brad Weldon, Elsy Flores, Jordan Varbel, William Toledo

Publications

This research investigated the use of locally produced ultra-high performance concrete (UHPC) as a grouting material to repair deteriorated shear keys. Shear keys are used in adjacent girder superstructures to produce monolithic behavior and load transfer across the structure. Shear key durability is a concern since shear key degradation can jeopardize the integrity of the structure. Transportation agencies have reported that 75% of distress in adjacent girder bridges is due to cracking and de-bonding along shear keys. Previous research has shown that locally produced UHPC has excellent mechanical and durability properties. UHPC has also been shown to have good bonding …

Structural Vulnerability Of Coastal Bridges Under Extreme Hurricane Conditions, Arturo Montoya, Adolfo Matamoros, Firat Testik, Reza Nasouri, Adnan Shahriar, Arsalan Majlesi

Publications

This work presents the results of a numerical study evaluating the response of coastal bridges due to hurricane-induced waves. The analyses were conducted using the Coupled Eulerian-Lagrangian (CEL) approach, available on the commercial finite element software Abaqus, which allows modeling the interaction between water and the bridge. The work concentrated on (1) establishing an approach for modeling the desired wave characteristics (i.e., wave height, and frequency) within the CEL simulation, (2) conducting simulations using actual bridge dimensions of historically damaged bridges, (3) analyzing a range of foundation flexibilities to determine its effect on the uplift and shear forces acting on …

Pedestrian Bridge In Tanzania, Maja Sagaser, Karina Rosales

Architectural Engineering

This senior project originated to address the need of the community of Same, Tanzania. There is a deep and wide ravine which floods, making the path many adults and children take to the Majevu Primary School increasingly difficult and dangerous. This report encapsulates all of the steps taken to complete an approved final design for a footbridge to be constructed over this ravine. It includes the project overview, the architectural and structural design process, as well as the important considerations. There are also structural drawings that include plans, elevations, and details.

Save Our Sound Obx, Inc. V. North Carolina Department Of Transportation, Mitch L. Werbell V

Public Land & Resources Law Review

The Fourth Circuit Court of Appeals recently ruled in favor of several governmental agencies seeking to construct a new bridge in the Pamlico Sound adjacent to North Carolina’s Outer Banks. For years, state and federal agencies have put forth a massive coordinated effort to address the constant weather damage and erosion which occurs to a section of North Carolina Highway 12. The court found the agencies properly cleared NEPA’s environmental review requirements for the bridge’s construction. Additionally, the opponent-litigants’ efforts to add claims challenging the project, based on new information about a shipwreck in the bridge’s path, were futile.

Fiber-Reinforced Polymer Bridge Girders For Extremely Aggressive Environments, Abdellah Emad Azeez

Doctoral Dissertations and Master's Theses

In 2012, the federal government estimated that $17.5 billion was spent on inspection, rehabilitation, maintenance, and replacement of the nation’s bridges. While the average lifespan of steel and reinforced concrete bridges is 50 years, certain bridges subjected to extremely aggressive marine environments may not reach this desired target. This research paper investigates using fiber-reinforced polymer (FRP) materials as primary bridge girders in medium span bridges (30 ft. to 75 ft.). The goal of this research is to identify the most efficient and cost-effective alternative for these corrosion-resistant materials and potentially extend the lifespan of these bridges up to 75 years. …

Towards Multiple Model Approach To Bridge Deterioration, Jin A. Collins

Open Access Theses & Dissertations

The Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) marked the start of a new era in transportation in the United States. ISTEA required transportation agencies to take a proactive approach to planning and management of their assets. This included requirements for managing pavement, bridges, safety, congestion, public transportation, and intermodal systems. For horizontal transportation assets (i.e., bridges and pavement), deterioration modeling is an essential tool (Yanev and Chen 1993). Since ISTEA, Bridge Management Systems (BMS) have been utilized to inform decision-making regarding bridge projects such as maintenance, rehabilitation, and replacement (MR&R) under financial limitations (Agrawal, Kawaguchi, and Chen 2010). …

Shear Stress Estimates In The Approach And Bridge Section By Using Various Formula, Jun Seon Lee

Graduate Theses, Dissertations, and Problem Reports (ETD)

Shear stress is the resistance force on top of the contact surface caused by moving flow and is one of the important variable in fluid mechanics. Thus, a lot of researches have been conducted to predict accurate value of shear stress. However, calculating shear stress with existing equations has several limitations because only gradually varied flow and/or uniform flow was considered in their studies. Therefore, direct applying those methods into complex flow type, such as around a bridge, to predict shear stress is questionable.

Thus, laboratory experiments were carried out in a laboratory flume to attack the objective of this …

Unmanned Aerial And Traversing Vehicle -- A Mobile Platform For Bridge Inspections, Clayton A. Fritsche

Masters Theses

“Unmanned aerial vehicles (UAVs), also known as drones, have been rapidly growing in popularity since their creation. This study aimed to create a robotic platform used to assist in the inspection process of the nation’s aging and deteriorating bridges. To this end, a multimodal inspection robot that utilized both flying and driving technologies, was designed, analyzed, and tested for aerial, traversing, and their transitional operability. The design, herein referred to as the “BridgeBot”, was evaluated both computationally and experimentally. A finite element model of the BridgeBot was established and analyzed under static loading scenarios to help determine stress distributions and …

Load Rating Mobility As A Framework For Bridge Owners, Bryan Keith Stephens

Open Access Theses & Dissertations

In this time of financial economy, bridge owners are faced with the important decision of where to focus financial assets while attempting to determine which structures are in most need. Bridge Engineers and researchers alike agree that a large portion of the United States bridge population are reaching the end of their design life. Researchers are currently investigating various means and methods of lengthening the amount of usefulness of these key pieces of infrastructure. This paper introduces the novel idea of bridge Load Rating Mobility and how it can be leveraged by stake holders to assist in making those financial …

Developing Computer Codes For Analyzing Bridge Response Due To Wim Data Truck Loading, Kenneth Patrick Pasley

Graduate Theses and Dissertations

Despite actual truck demographics evolving over the past 30 years, the Arkansas legal loads for bridge posting have not been updated. Custom computer codes were developed.to facilitate comparison between the current Arkansas legal loads for bridge posting and the actual Arkansas truck traffic to ensure that actual reactions are enveloped by the state'. The program, WIMFluence, calculates shear and moment influence lines for a bridge and the resulting shear and moment reactions based on weigh-in-motion data. With supporting scripts, the reactions due to actual Arkansas truck traffic were compared to those due to the current Arkansas legal loads for bridge …

Coastal Bridges Under Hurricane Stresses Along The Texas And Louisiana Coast, Adolfo Matamoros, Firat Testik

Data

Corresponding data set for Tran-SET Project No. 17STTSA02. Abstract of the final report is stated below for reference:

"The main objective of this study was to develop a high-resolution model capable of simulating the response of bridge structures to hydrodynamic loads for hurricane design conditions (i.e. surge height, wave height, and frequency) expected in the Texas-Louisiana coast. The model relied on Coupled Eulerian-Lagrangian techniques (CEL) where solids are simulated with Lagrangian meshes, while fluids are simulated using Eulerian meshes, and was calibrated using historical data from wave impact laboratory tests. Two high resolution models were created, the first of a …

Coastal Bridges Under Hurricane Stresses Along The Texas And Louisiana Coast, Adolfo Matamoros, Firat Testik

Publications

The main objective of this study is to develop a high-resolution model capable of simulating the response of bridge structures to hydrodynamic loads for hurricane design conditions (i.e., surge height, wave height, and frequency) expected in the Texas-Louisiana coast. The model relied on Coupled Eulerian-Lagrangian (CEL) techniques where solids are simulated with Lagrangian meshes, while fluids are simulated using Eulerian meshes, and was calibrated using historical data from wave impact laboratory tests. Two high resolution models were created, the first of a tsunami wave impact test conducted at Oregon State University and the second of a bridge located in the …

Structural Identification And Assessment Of The Inverted Tee Girder Bridge System, Garrett P. D. Martindale

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The Inverted Tee (IT) girder bridge system was originally developed in 1996 by the University of Nebraska–Lincoln (UNL) and Nebraska Department of Roads (NDOR) engineers. This bridge system currently accounts for over 110 bridges in Nebraska used for both state highways and local county roads. Excessive transverse and longitudinal deck cracking has been observed and noted in numerous bridge inspection reports. Since the IT girder bridge system is relatively new, limited data and knowledge exist on its structural performance and behavior. This study evaluates the IT girder bridge system by conducting twenty field observations as well as recording accelerometer time …

Bio-Inspired Hybrid Vibration Control Methodology For Intelligent Isolated Bridge Structures, Mariantonieta Gutierrez Soto

Civil Engineering Faculty Publications

Inspired by evolutionary game theory, the biological game of replicator dynamics is investigated for vibration control of bridge structures subjected to earthquake excitations. Replicator dynamics can be interpreted economically as a model of imitation of successful individuals. This paper uses replicator dynamics to reduce vibrations while optimally allocating the control device forces. The control algorithm proposed is integrated with a patented neural dynamic optimization algorithm to find optimal growth rate values with the goal of achieving satisfactory structural performance with minimum energy consumption. A model is described for hybrid vibration control of smart highway bridge structures subjected to earthquake loading.

On The Fatigue Of Headed Shear Studs In Steel-Concrete Composite Bridge Girders, Brianna Laurene Ovuoba

Graduate Theses and Dissertations

Shear connectors are commonly used in steel bridges to join the concrete deck and steel superstructure, providing a mechanism for shear transfer across the steel-concrete interface. The most common shear connector is the headed shear stud. In the current AASHTO LRFD Bridge Specifications on composite design, shear stud fatigue often governs over static strength, and a large number of shear connectors often result. This dissertation investigates headed shear stud fatigue capacities and demands, and provides insight into conservancies in existing design specifications through examination of existing high-traffic bridge performance.

To investigate stud capacity, a total of six high-cycle fatigue tests …

Bridge Build, Andrew Little

Student Scholarship

Bridge build design that includes not only a building process, but a research paper to make the best build possible as well.