Civil Engineering Commons^™

Characterization Of Asphalt Healing And Incorporation In A Fatigue Damage Model, Umme A. Mannan

Civil Engineering ETDs

Healing is defined as the restoration of the material property during the rest period after damage. The healing property of the asphalt binder is opposite to fatigue damage, which occurs due to repeated traffic loading. On the other hand, healing occurs in the rest period between loading. Most of the existing methods for characterizing the fatigue damage and healing of asphalt are empirical in nature and do not consider the mechanism of healing. Although the asphalt concrete is a mixture of asphalt binder, fines and aggregates, most of the healing occurs in the asphalt binder. Therefore, it is important to …

Evaluation Of The Properties Of Rubberized Asphalt Binders And Mixtures, Kazem Jadidirendi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Rubber modified binder samples are tested and evaluated based on SHRP requirements. Best rubber content is suggested for modifying binder. Rubber modified asphalt mixtures were manufactured and tested. Based on Hveem stability and volumetric properties of asphalt mixtures, optimum binder content is evaluated and reported. Performance properties of asphalt mixtures made with various rubber size and method were analyzed and compared. An ultrasound measurement performed on asphalt mixture samples and the results were analyzed. It is discovered that rubber improves asphalt viscosity and resistance to rutting deformation. Rubber also increases asphalt’s dynamic modulus.

Multiscale Mechanistic Characterization Of Reclaimed Asphalt Pavements, A. M. Feroze Rashid

Student Theses and Dissertations

The Superpave test methods are based on unmodified asphalt binders and mixes; researchers have reported limitations of these methods in evaluating modified binders. An Atomic Force Microscope (AFM) has the potential to determine morphology and nanomechanistic properties of modified and unmodified asphalt binders. In this study, different amounts of binders recovered from four selected reclaimed asphalt pavements (RAP) are blended with a virgin Performance Grade (PG) binder and tested by following Superpave tests and AFM techniques. Binders with high RAP are found to have more rutting resistance than the virgin binder but less cracking resistance due to their brittleness. Toward …

An In-Depth Evaluation Of Shear Box Compactor For Hot Mix Asphalt, Isaac Jaime Aguilar

Open Access Theses & Dissertations

Asphalt pavement is present in each roadway in every town or city today and it is paramount to properly design pavement to efficiently reduce its deterioration. To determine how pavement fails, pavement specimens prepared in the laboratory undergo performance tests which demonstrate the pavements strength and durability. Performance tests require little variability from compacted specimens, and it is critical to have a compaction method which is similar to field compaction and produces homogenous specimens. Currently, laboratory performance test specimens are obtained with the Superpave Gyratory Compactor (SGC). That device has few similarities to the rolling compactor, which performs the actual …

Reflectivity Of Light Emitting Diodes (Led) And Incandescent Lights On Concrete And Asphalt Pavements., Jeremy Elliott Rice

Electronic Theses and Dissertations

The purpose of this study is to investigate the reflectivity of light on concrete and asphalt pavement systems. In 1983, the Illuminating Engineering Society (IES) published the first recommended practice (RP-8) for the design of roadway and parking lot lighting. This design method implemented empirically tested factors which were defined as the “reduced luminance coefficients” or the R-Tables. The R-Tables are essential for proper design of light pole installation dimensions, required power, and the distribution of light. The originally tested pavements are not necessarily representative of modern pavement materials used today. Moreover, recent Light Emitting Diodes (LED) are a relatively …

Quantification And Characterization Of Fracture Resistance In Asphalt Concrete Based On R-Curve Method, Shu Yang

Graduate Theses and Dissertations

The application of fracture energy is widely applied in the evaluation of cracking in the laboratory for asphalt concrete. However, this single number does not provide information on the characterization of the initiation and propagation of cracks. The Resistance Curve method, or R-Curve, is widely applied in characterizing various materials including, but not limited to, metal, polymer, rock, and composite. This research R-Curve method introduces asphalt concrete through a stepwise approach. First, in chapter one, there is a literature review of the history of fracture mechanics, fracture research in asphalt concrete, and an examination of the role of R-Curve application …

Exploring The Black Space Of Compressive And Shear Modulus, Airam Marlee Morales Vega

Graduate Theses and Dissertations

Uniaxial dynamic modulus is a standard test used to determine the viscoelastic behavior of asphalt pavement materials, with the standard analysis generating a Master Curve. One alternative to the master curve approach is a Black Space diagram, which is a rheological plot that can delineate either dynamic modulus |E*| or shear modulus |G*| vs. phase angle (δ). In this study, four asphalt binders were tested with one aggregate blend. One of these four binders was unmodified and the other three were modified with polymers and acids. Additionally, Polyphosphoric acid (PPA) is compared to the more traditional SBS polymer modification. PPA …

Mechanistic And Economical Characteristics Of Asphalt Rubber Mixtures, Mena I. Souliman, Annie Eifert

Civil Engineering Faculty Publications and Presentations

Load associated fatigue cracking is one of the major distress types occurring in flexible pavement systems. Flexural bending beam fatigue laboratory test has been used for several decades and is considered to be an integral part of the new superpave advanced characterization procedure. One of the most significant solutions to prolong the fatigue life for an asphaltic mixture is to utilize flexible materials as rubber. A laboratory testing program was performed on a conventional and Asphalt Rubber- (AR-) gap-graded mixtures to investigate the impact of added rubber on the mechanical, mechanistic, and economical attributes of asphaltic mixtures. Strain controlled fatigue …

Integrated Computational And Experimental Evaluation Of Electromagnetic Energy-Induced Self-Healing Performance Of Asphalt Composites, Zigeng Wang

Dissertations, Master's Theses and Master's Reports

The objective of this doctoral research is to investigate the electromagnetic energy induced self-healing effect of modified asphalt mixture material by developing computational and experimental characterization tools. More than 90% of the pavements in United States are constructed by asphalt mixture. The durability of pavement decreased by distresses has significant impact on maintenance costs. The asphalt mixture has self-healing capability because the asphalt could flow and fill the microcracks if enough external energy can be transmitted to the asphalt mixture system. However, the self-healing capability of asphalt is limited based on the climatic condition and traffic volume. Therefore, it is …

The Effects Of Recycling Asphalt Use In Terms Of Economic Growth And Environmental Improvement In Kosova, Muhamet Ahmeti, Binak Beqaj

UBT International Conference

Through this paper is analysed the possibility of recycling asphalt and reusing this in receipts of new asphalt to build road infrastructure inside urban areas and inter-urban areas, because analysing the investments that are being realized in the road infrastructure in Kosova last years, and investments that are going on, there are indicators showing economical, environmental and ….benefits of the society .

According to database of the Kosova Ministry of Transport and Telecommunication until the year 2014, the territory of Kosova has 2005.5 km of the road, 4% are highways, magisterial roads 32% and 64% regional roads, most of them …

Evaluation Of Oxidization Of Crumb Rubber-Modified Asphalt During Short-Term Aging, Amir Ghavibazoo, Magdy Abdelrahman, Mohyeldin Ragab

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt binder is subjected to aging during the construction process and service life of pavement. Aging substantially changes the chemical composition and physical properties of asphalt and leads to premature distresses on pavement. It is speculated that crumb rubber modifier (CRM) reduces the susceptibility of asphalt to aging, but its mechanism is not fully understood. Also, the impact of interaction parameters and exchange of components on the aging behavior of a crumb rubber-modified binder is not fully understood. In this study, the effect of CRM on the short-term aging of asphalt was investigated through an analysis of the distinctions between …

Alternative Fatigue Cracking Resistance Assessment Criteria Of Asphalt Mixtures With Overlay Tester, Alejandro Miramontes

Open Access Theses & Dissertations

The accumulation of damage due to cracking of hot mix asphalt (HMA) layers under repeated loading along with the climatic effects is known as fatigue cracking. The Overlay Tester (OT) has been implemented or considered by several highway agencies as an index to evaluate the cracking susceptibility and resistance to cracking of asphalt mixtures in the laboratory. The performance indicator used to measure the quality of the HMA mixes is the number of cycles that a specimen may resist during the test until the crack appears and fully propagates to the top of the specimen. The repeatability of the number …

The Investigation Of Cold-Mix Asphalt Creep Stiffness Testing Using Multiple Test Apparatuses And Gradations, Alexander Jackson

Graduate Theses and Dissertations

Many current methods of designing and testing Cold In-Place Recycled (CIR) asphalt are undesirable because they require large amounts of material and significant preparation. In an effort to lessen the cost and time of materials testing, this research utilizes several different methods of small scale testing of creep stiffness. These methods include using a Discovery Hybrid Rheometer (DHR) and a three point bending test to find the creep stiffness of emulsion based CIR. The new testing methods utilized samples on the scale of up to a hundredth the size of what the traditional methods of testing require. The two smaller …

Effects Of Interaction Conditions On Internal Network Structure Of Crumb Rubber-Modified Asphalts, Mohyeldin Ragab, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Investigation of the effect of interaction conditions on the development of the internal network structure of crumb rubber-modified asphalt (CRMA) was carried out. Enhancements in the CRMA physical properties, such as stiffness, expressed in the complex modulus (G*), and elasticity, expressed in the phase angle (δ), as a result of the development of three-dimensional (3-D) entangled network structure were achieved. These results came from controlling the interaction conditions of CRMA synthesis to regulate the crumb rubber-modified (CRM) components that were responsible for the formation of the 3-1) entangled network structure. Dissolution tests and thermogravimetric analysis (TGA) were performed on the …

Parametric Analysis Of Resilient Modulus Modeling For Recycled Asphalt Pavement In Base Layer, Ehab Noureldin, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The resilient modulus (M_R) has been found to be the most important parameter in the Mechanistic-Empirical Pavement Design Guide (MEPDG) for the base layer. A literature review showed that the use of recycled asphalt pavement (RAP) in the base layer had many economic and structural benefits. The prediction of M_R with the specific MEPDG model for the base layer mixed with RAP was found to be reliable for several field conditions. However, further studies of the MEPDG model are needed for an understanding of the physical meaning of each parameter in the model. The most important factor …

Permit Tool: Development Of An Algorithm To Determine Performance Life Of Hma Mixes In Texas, Luis Alberto Torres Escobedo

Open Access Theses & Dissertations

A number of hot mix asphalt (HMA) types, such as permeable friction course (PFC), stone mastic asphalt (SMA), performance design mixes and conventional dense graded mixes are currently used to construct or overlay Texas roads. One of the important inputs into current pavement design programs used by the Texas Department of Transportation (TxDOT) is the performance lives of HMA mixes. To determine the best mix type for a particular job or to analyze the performance of a mix or a road, a new system can be developed to rationally quantify the HMA mix performance. This system must have access to …

Feasibility Of The Use Of Ultrasound Measurements For Grade Verification Of The Performance Grade Asphalt Binders, Mehdi Khalili

UNLV Theses, Dissertations, Professional Papers, and Capstones

This research investigates the feasibility of application of high frequency immersion ultrasonic measurement (UM) to discriminate different performance grade (PG) asphalt binders. PG asphalt binder is one of the main components of hot mix asphalt used for roadway construction. UT may provide an inexpensive alternative to sophisticated tests currently used for quality control of PG asphalt binders. Nine different PG asphalt binders used were selected for this investigation. Velocity (V) and integrated response (IR) of the ultrasonic wave were measured. The IR is a measure of the ratio of ultrasonic energy transmitted into the material to the ultrasonic energy reflected …

Performance Enhancement Of Crumb Rubber-Modified Asphalts Through Control Of The Developed Internal Network Structure, Mohyeldin Ragab, Magdy Abdelrahman, Amir Ghavibzaoo

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Control of the internal network structure of crumb rubber-modified asphalt (CRMA) was investigated for its effect on property development in the study presented in this paper. The investigation included evaluation by rheological and interrupted shear tests. Rheological testing involved the monitoring of the changes of the produced complex modulus (G*) and phase angle (δ) for CRMA. In the interrupted shear tests, the shear stress profile for the produced CRMA was investigated. It was found that triggering the critical conditions of the combined interaction of speed, temperature, and time was essential to inducing the formation of the three-dimensional network …

The Laboratory Evaluation Of Bio Oil Derived From Waste Resources As Extender For Asphalt Binder, Xu Yang

Dissertations, Master's Theses and Master's Reports - Open

A shortage of petroleum asphalt is creating opportunities for engineers to utilize alternative pavement materials. Three types of bio oils, original bio oil (OB), dewatered bio oil (DWB) and polymer-modified bio oil (PMB) were used to modify and partially replace petroleum asphalt in this research. The research investigated the procedure of producing bio oil, the rheological properties of asphalt binders modified and partially replaced by bio oil, and the mechanical performances of asphalt mixtures modified by bio oil. The analysis of variance (ANOVA) is conducted on the test results for the significance analysis. The main finding of the study includes: …

Network- Level Pavement Performance And Management Study In Connecticut, Ramandeep S. Josen

Master's Theses

This thesis presents the analysis of asphalt pavement cracking data on the network level in Connecticut. Pavement performance indicators including longitudinal and transverse cracking as well as roughness are investigated with respect to numerous distinct factors that can be grouped into three categories, i.e. climatic-, pavement structure-, and traffic-related. High-quality climatic data was obtained from the national weather stations in Connecticut. Maintenance and construction data was used to determine the pavement age and structure amongst several other factors. Traffic data was acquired from the state records and accumulated traffic loading was estimated for all segments based on their age. High …

Asphalt Testing: Enhancing The Roads, Andrea Gutierrez, Soheil Nazarian, Anjan K. Siddagangaiah

COURI Symposium Abstracts, Summer 2012

At the University of Texas at El Paso, the Center for Transportation Infrastructure Systems is conducting several asphalt tests to ensure the quality of the asphalt and the safety of the public. The tests determine special engineering properties of the material such as the strength and aggregate-asphalt ratio that are crucial to the life span of the asphalt on the field. The five tests that are conducted are:

• Maximum Theoretical Specific Gravity Test (GMM) – used to find the density of the material
• Bulk Specific Gravity Test (GMB) – determines the air pockets (air voids) in the material using the …

Laboratory And Field Evaluation Of Two Warm-Mix Additives In Connecticut And Validation Of An Alternative Moisture Susceptibility Test, Alexander K. Bernier

Master's Theses

The first official state Warm-Mix Asphalt (WMA) pavement project in Connecticut was constructed between July 20th and 22nd, 2010 and it involved three experimental sections, i.e. one section with a conventional HMA (control section) and two WMA sections with different technologies, wax and foamed asphalt. All three sections are located on Route 70 in central Connecticut. The materials were collected in loose form and reheated and compacted in laboratory conditions (laboratory fabricated specimens). This paper discusses the effect of mix type on the results from several tests conducted in the laboratory, such as Semi-Circular Bending, Hamburg Wheel Tracking, Indirect Tensile, …

Influence Of Warm Mix Additives Upon High Rap Asphalt Mixes, William Rogers

All Dissertations

This study was conducted to determine the effect of warm mix (WMA) modifiers on asphalt mixes containing high percentages of reclaimed asphalt pavement (RAP). Mixes were created using three aggregate sources, four RAP percentages (0%, 20%, 35%, and 50%), and three warm mix modifiers (HMA, zeolite, and Sasobit®). Base binders from the same source (PG 64 -22, 58 -28, 52 -28) and one rejuvenator were used for each mix to ensure the final blended binder grade was at least PG 64 -10.
Specimens were created at HMA or suggested WMA temperatures and tested for rut depth, indirect tensile strength (ITS), …

Reducing Moisture Damage In Asphalt Mixes Using Recycled Waste Additives, Anthony John Boyes

Master's Theses

This thesis has determined that using fly ash as a mineral filler in asphalt pavements can help strengthen and reduce asphalt moisture damage. Also, dynamic shear rheometer tests show that these additives have a stiffening effect on asphalt binder. Moisture related damage is considered one of the main causes of asphalt pavement failure. As water infiltrates a layer of asphalt, it slowly strips away asphalt binder, weakening the aggregate/binder bond. This process, combined with the cyclic loading of traffic, can lead to several different types of asphalt failure including rutting, raveling, bleeding, and cracking. For several decades, research has been …

Gis Based Pavement Maintenance: A Systematic Approach, Robert J. Kmetz

Purdue Polytechnic Directed Projects

Abstract

According to 2008 Federal Highway Administration (FHWA) statistics, there are 2,734,102 miles of paved public roads in the United Sates, with an additional 1,324,245 miles of unpaved public roads.  Road conditions deteriorate with time as the result of weather effects, deicing salts, and vehicle loads.  The most common pavement distress includes cracking, rutting, and potholes.  These pavement defects must be repaired to restore the pavement to a satisfactory service level for road users. According to the FHWA, in 2006 approximately $54.2 billion dollars was spent on maintenance and expansion, just on U.S. highways alone.

Routine maintenance is a cost …

The Effect Of Loose Mix Aging On The Performance Properties Of Warm Asphalts, Thomas Martin Clements

University of Kentucky Master's Theses

Recent improvements in warm mix asphalt technologies have spurred an aggressive adoption of these new practices within the asphalt paving industry. Concerns have arisen among federal and state agencies about the effects of this line of products on the performance of asphalt pavements. An investigation of the effects of lowering mixing, aging and compactions temperatures while varying the loose mix aging time was performed. Hamburg Wheel Tracking, Flow Number, Dynamic Modulus and Fracture Energy testing were used to evaluate mechanistic properties of the materials.

Modeling The Effect Of Moisture On Resilient Modulus Of Untreated Reclaimed Asphalt Pavement, Mohamed Attia, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The use of reclaimed asphalt pavement (RAP) as a base layer is increasing as quality aggregate becomes scarcer and more expensive. Moisture content is known to have a great impact on the resilient modulus (M_R) of granular materials, and several researchers have devoted effort to develop and verify analytical models to describe that impact. Limited work has been done to quantify the effect of moisture content on RAP as a base layer. It has not been determined whether the existence of aged binder will allow designers to use the same analytical models developed for granular materials. This study …

Moisture Sensitivity Of Hot Mix Asphalt (Hma) Mixtures In Nebraska – Phase Ii, Yong-Rak Kim, Hoki Ban, Ingryd Pinto

Mid-America Transportation Center: Final Reports and Technical Briefs

As a consequential effort to the previous NDOR research project (P564) on moisture damage, this report presents outcomes from this project incorporated with the previous project. Performance changes and fundamental material characteristics associated with moisture damage due to various anti-stripping additives in asphalt mixtures are studied through various experimental approaches and a numerical simulation. Three additives (i.e., one reference additive, hydrated lime, and two alternative additives: fly ash and cement) are investigated by adding them into two types of mixes (SP2 for low-traffic-volume roadways and SP5 for high-traffic-volume roadways) where two different asphalt binders (PG 64-22 for the SP2 mix …

Controlling Performance Of Crumb Rubber-Modified Binders Through Addition Of Polymer Modifiers, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The use of tire rubber as a modifier to enhance the properties of asphalt mixes through the wet process has proved to be a successful procedure, but full control of the properties of crumb rubber-modified binders has been a challenge. The literature indicates a wide variation on adding rubber to asphalt and that the degree of success of rubber modification in AC mixes depends on several factors, the majority of which relate to the method of mixing, storing, and transporting and to construction technologies. Understanding the nature of the interaction process between asphalt cement and crumb rubber-modifier (CRM) helps explain …

Initial Study For Cost-Effectiveness Of Joint/Crack Sealing, Chuanxin Fang, Khaled A. Galal, David R. Ward, John E. Haddock

JTRP Technical Reports

The sealing and resealing of joints and cracks in PCC, HMA, and composite pavements is assumed to be an important component of pavement maintenance. Recently this practice has been challenged by research indicating that sealing may not be cost-effective. The Indiana Department of Transportation currently spends approximately four million dollars annually to perform joint/crack sealing. The primary objective of the research presented in this report is to investigate the costeffectiveness of joint/crack sealing in relation to pavement performance. The results of a mail survey showed that most states, including Indiana, do not have quantitative justification for sealing policies, nor do …