Civil Engineering Commons^™

Data Driven Bridge Deck Deterioration Modeling And Maintenance Intervention Scheduling, Deepak Kumar

Dissertations and Theses

Majority of over 617,000 bridges across the United States are significantly impacted by environmental factors, aging materials, and heavy traffic loads. According to the 2021 Infrastructure Report, nearly 231,000 bridges require repair or preservation work, with 46,154 (7.5%) being classified as structurally deficient, thereby posing risks for mor than 178 million daily trips across these bridges. Despite recent improvements, 42% of U.S. bridges are at least 50 years old, underscoring an urgent need for increased investment to meet repair demands. The nation’s backlog of bridge repairs is estimated at $125 billion, with a 58% increase in annual spending required to …

Deep Learning Architectures For Improving Weather Research And Forecasting (Wrf) Precipitation Estimates And Landslide Susceptibility Mapping: A Case Study Of Puerto Rico, Said A. Mejia Manrique

Dissertations and Theses

Precipitation is a critical factor in the Earth’s hydrological cycle and has a profound impact on various environmental and socioeconomic systems, including management of water resources, flood forecasting, and the evaluation of natural hazards, particularly those associated with rainfall-induced landslides. For the latter, obtaining precise precipitation estimates is essential, as intense rainfall events can trigger landslides that pose significant risks to human life, infrastructure, and ecosystems, particularly in mountainous regions. Puerto Rico (PR), with its mountainous terrain, tropical climate, and vulnerability to hurricanes, provides a unique environment for studying precipitation patterns and the need for accurate rainfall estimates. The complex …

Geospatial Analysis For Urban Resilience: Green Space, Flood Susceptibility, And Wetland Restoration Potential, Jessica Lareaux

Dissertations, Master's Theses and Master's Reports

Through the integration of high-resolution geospatial data, hydrologic modeling, and spatial statistics, this research addresses three interrelated topics that are critical to sustainable, equitable, and climate-resilient urban planning. The overall objective of this dissertation is to provide data-driven and machine learning-based geospatial analysis frameworks that enhance our understanding of environmental inequities, flood exposure, and the potential for wetland restoration, with a focus on urban contexts. The study presented in Chapter Two examines the distribution and accessibility of urban green spaces in Detroit, Michigan, using high-resolution geospatial data and geospatial analysis methods, including geographically weighted regression (GWR) and network-based analyses. This …

Bond Behavior Of Magnesium Potassium Phosphate Cement (Mkpc) Coating For Steel Reinforcement, Eric Williams

Masters Theses

"This research investigates the bond behavior of magnesium potassium phosphate cement (MKPC) coated mild steel deformed bars in conventional concrete and concrete repair materials. For typical steel reinforcement in concrete, a thin “passive layer” develops around the reinforcement, which protects the reinforcement from corrosion. The concrete carbonates over time, reducing the protection of the passive layer and allowing chlorides, which corrode the reinforcement, to penetrate at an increasing rate. In some cases, to combat this corrosion, a protective layer is added to the reinforcement prior to installation. Common protective layers include epoxy coatings or zinc galvanization. MKPC is a novel …

System Design For Highly Accurate And Efficient Target Detection In Triaxial Testing, Qingqing Fu

Masters Theses

Accurate and automated recognition of coded targets is crucial for high-precision photogrammetry-based measurements in triaxial testing. Traditional recognition methods, including those based on deep learning and table decoding, often struggle with issues such as perspective distortion, rotation, and variable lighting, leading to unreliable results. While deep learning approaches offer some improvements, they remain computationally intensive and sensitive to environmental factors.

This thesis introduces an innovative system that replaces deep learning algorithms with a blob analysis-based method for efficient and robust recognition of coded targets. The system also employs newly designed solid points of varying sizes and patterns, eliminating the need …

Gfrp Reinforced Bridge Barriers: Experiment Testing, Manish Kumar Gadhe

Masters Theses

This study focused on evaluating the performance of concrete bridge barriers reinforced with Glass Fiber Reinforced Polymer (GFRP) compared to those reinforced with conventional mild steel. Four full-scale barriers were constructed, three using GFRP bars as the reinforcement and one with mild steel reinforcement. These were cast on two concrete slabs to ensure consistent support conditions. The use of GFRP aims to address durability concerns associated with steel reinforced concrete (RC), particularly corrosion of these bars in harsh environments.

To simulate real-world impact scenarios, a weighted cart was launched at each barrier using a guided sled system. Sensors, including load …

Biopolymer-Induced Soil Ductility Enhancement: Mitigating The Effects Of Desiccation Cracks, Rabindra Prasad Bohara

Electronic Theses and Dissertations

This study addresses the formidable challenges of expansive clayey soils, notorious for their swelling-shrinkage characteristics, which often lead to ground instability and structural damage. While effective in mitigating soil swell-shrink potential and enhancing strength, traditional calcium-based stabilizers can react with higher sulfate content to form ettringite, causing volumetric changes and infrastructure distress. To assess the impact of stabilizing sulfate-rich soils and determining the various engineering properties, samples of both control and stabilized soils were prepared using lime, biopolymer (guar gum), and lime with guar gum at concentrations of 2% and 4% lime only, 0.5%, 1% and 1.5% guar gum only, …

Precast Foundation For Steel Lattice Towers, Wessam Ramadan

All ETDs from UAB

Steel lattice towers are essential structures used in power transmission, telecommunications, and wind turbine towers, where they must withstand various loads to ensure stability and durability. The foundation system plays a crucial role in supporting these towers, with different types chosen based on soil conditions, environmental factors, and project requirements. Traditional foundations, such as drilled shafts, spread footings, and steel grillages have been widely used but often come with challenges, including long installation times, high labor costs, and difficult site conditions. As demand for transmission infrastructure grows, there is a need for faster, more efficient, and environmentally friendly foundation solutions. …

Unmanned Vehicle Having Flight Configuration And Surface Traverse Configuration, Genda Chen, Alec Reven, Bo Shang, Zenhua Shi, Liujun Li, Boyang Li

Patents

An unmanned vehicle includes a body, at least one power source coupled to the body, a flight propulsion system coupled to the at least one power source and configured to propel the unmanned vehicle through air, and a surface propulsion system coupled to the at least one power source and configured to propel the unmanned vehicle along a surface. The unmanned vehicle is configured to switch between a flight configuration in which the unmanned vehicle is propelled through air via the flight propulsion system, and a surface traverse configuration in which the unmanned vehicle is propelled along the surface via …

Large-Scale Carbon-Mineralization Through Oxalatization, Hongyan Ma, Wenyu Liao

Patents

The present invention is broadly concerned with mineralization methods that assist in permanent carbon storage. The methods provide a storage mechanism for oxalic acid generated by existing or future-developed carbon capture and conversion methods that convert CO2 to oxalic acid. That oxalic acid can be injected into a subsurface rock formation containing non-carbonate rock to form oxalates or oxalate hydrates. Alternatively, oxalic acid can be mixed with mine tailings, well drilling dirt, crushed rocks, etc., that contain desired non-carbonate rock minerals, to promote mineralization.

Groundwater Pumping Impacts On Stream Depletion In Humboldt County, Ca: Integrating Analytical Models And Field Data, Andy Hans Heise

Cal Poly Humboldt theses and projects

This study addresses the significant concern of stream depletion from groundwater pumping in Humboldt County, CA. The objective of this study is to develop an analytical model for estimating stream depletion and integrating field data into model parameters.

The methodology involved conducting a field study near three operating wells by a stream, installing stream gages upstream and downstream of the wells, and recording pumping rates and schedules for two of the wells. The third well’s pumping data was synthetically generated, for privacy concerns of the well owner. The StreamDepletR package was used for estimating depletion rates in a stream in …

An Analysis Of Uv Disinfection Of Municipal Wastewater Following Natural Treatment Systems, Jonathan Andrew Kirchubel

Cal Poly Humboldt theses and projects

On January 30, 2024, the City of Arcata replaced chlorine with ultraviolet (UV) irradiation as its disinfection method for treating its wastewater prior to discharging to Humboldt Bay. The Arcata wastewater treatment facility (AWTF) utilizes natural treatment systems for treating its secondary effluent, which can provide issues for UV disinfection through variance in turbidity, total suspended solids (TSS), pH, humic acids, and color. This project aimed to identify whether the water quality characteristics of natural treatment systems in the AWTF would impact UV disinfection of municipal wastewater.

Thirty-one sampling periods occurred between June 8, 2024, and March 1, 2025, recording …

Temporal Analysis Of Construction Safety Incidents In Southeastern U.S. Using Machine Learning Techniques, Mayowa O. Oladele

College of Graduate Studies: Theses & Dissertations

Construction safety incidents remain a significant concern, particularly in the Southeastern U.S. due to the high-risk nature of the industry. Analyzing patterns in these incidents can help improve safety practices and reduce accidents. Machine learning (ML) techniques were employed in this study to identify temporal patterns in construction safety incidents, aiming to enhance proactive safety management. The machine learning methods used in this research included logistic regression, decision trees, random forest, support vector machine (SVM), and K nearest neighbors (KNN).

The objective of the study was to analyze temporal trends in safety incidents and identify the most effective machine learningtechnique …

Comparative Analysis Of Lidar And Close-Range Photogrammetry Techniques For Inspection Of Mse Walls In Two Georgia Bridges, Md. Mehrab Hossain

College of Graduate Studies: Theses & Dissertations

Mechanically Stabilized Earth (MSE) retaining walls are durable, settlement tolerant, easy to install, and present cost-effectiveness, in highway bridges. Nevertheless, the cost of repairing MSE walls is high, and it is crucial to have an accurate, quantitative, and scalable inspection method for early detection of potential problems. This study aims to analyze and evaluate undesired displacements that may affect these walls over time. For this, two remote-sensing technologies are considered: Light Detection and Ranging (LiDAR) and 3D Close Range Photogrammetry (CRP). Their performances are compared against an accurate Robotic Total Station (RTS) device, serving as the benchmarking instrument. This work …

Accelerated Test Method (Atm) For The Evaluation Of External Sulfate And Chloride Attack On Concrete Using Artificial Climate Environment (Ace): An Assessment Of Methodology, Eli Walker

College of Graduate Studies: Theses & Dissertations

This study seeks to investigate a testing methodology that utilizes accelerated testing methods (ATM) in conjunction with nondestructive testing methods (NDT) to assess destructive ion attacks on concrete. Through the testing of concrete samples, the impacts of chloride and sulfate ions on concrete will be tested by subjecting concrete to cyclic testing in an artificial climate environment. Electrical resistivity (ER) and ultrasonic pulse velocity (UPV) testing will evaluate the impact of the accelerated testing on the migration of destructive ions within the pore structure of the tested concrete. Based on this investigation, comparisons between accelerated, non-accelerated, and control samples will …

Recovery Of Iron And Aluminum From Acid Mine Drainage For Beneficial Uses, Katelyn Renee Pepe

Graduate Theses, Dissertations, and Problem Reports (ETD)

Acid mine drainage (AMD) is a widespread issue across the globe, in which some of the most critical cases are created by the mining industry. Researchers have investigated ways to derive benefits from AMD, such as precipitating rare earth elements (REEs) to generate potential revenue from AMD treatment and supplement market demand. However, the bulk of precipitated sludge is composed of iron and aluminum, which also have market value but are discarded in current practice.

Using the Omega site in West Virginia (WV) as a representative AMD source, the objectives of this study are (1) to determine a replicable precipitation …

Prioritizing Amd Impaired Watersheds For Watershed-Scale Restoration Using Multi-Criteria Decision Analysis, James Nicholas Marino

Graduate Theses, Dissertations, and Problem Reports (ETD)

Acid Mine Drainage (AMD) remains a significant environmental challenge in coal-mining and hard rock regions like West Virginia, degrading water quality and ecosystem health. Traditional site-specific remediation efforts often prove inefficient in addressing AMD at large scale. This study explores watershed-scale restoration as a more effective solution, leveraging centralized treatment facilities and multi-source pollution management. This study will follow Multi-criteria Decision Analysis (MCDA), specifically the Analytical Hierarchy Process (AHP), to develop a structured rubric for grading watersheds. The process involves identifying critical criteria, organizing them into a hierarchy, and generating weights for clusters of criteria through collaboration with decision makers. …

Reuse Of Calcium Carbonate (Caco3) Recovered From Discarded Carpets As Filler In Fiber-Reinforced Polymer (Frp) Composites, Roshan Devkota

Graduate Theses, Dissertations, and Problem Reports (ETD)

Over four billion pounds of carpet are discarded annually in the United States, making carpet waste a significant environmental concern. Calcium carbonate (CaCo₃) constitutes up to 45% of the mass of most synthetic carpets. Reusing this CaCo₃ as a filler in the rapidly growing fiber-reinforced polymer (FRP) industry, which is projected to reach USD 10.38 billion, presents a low-cost, practical approach to developing a market-based solution to post-consumer carpet waste.

This study investigates the reuse of CaCo₃ recovered from discarded carpet backing as a filler in FRP composites, focusing on its mechanical viability in comparison to virgin CaCo₃. The methodology …

Hydronic Parking Lots: A Solution For Urban Heat Island Mitigation, Sumeet Jinnappa Paramaj

Theses and Dissertations

The Urban Heat Island (UHI) effect has emerged as a critical challenge in modern cities. It contributes to elevated local temperatures, placing significant stress on urban ecosystems and public health. One of the primary drivers of this phenomenon is the widespread use of impervious surfaces, such as dark-colored parking lots, which absorb heat during the day and gradually release it at night. This ongoing cycle results in persistently warmer urban environments. As cities continue to expand and densify, the need for effective, sustainable strategies to reduce urban heat becomes increasingly urgent.

This project aims to explore innovative interventions, particularly in …

Aqueous Carbonation Of Steel Slags: A Comparative Study On Mechanisms, Nannan Zhang, Gao Deng, Wenyu Liao, Hongyan Ma, Chuanlin Hu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated the aqueous carbonation mechanisms of three typical steel slags: ladle metallurgy furnace (LMF) slag containing high Al content, electric arc furnace (EAF) slag featuring high Si content and relatively low Al content, and ladle-arc fusion (LAF) slag with medium-Al content. It was found that the carbonation kinetics of the three slags were similar and followed the surface coverage model within the first 6 h of carbonation. Initially, the carbonation process was primarily governed by the reaction product precipitation. After 3 h of carbonation, the process was dominated by mineral dissolution, controlled by the uncovered reactive sites. The …

Every Publication Needs An Author Verified Tl;Dr Statement, Sarah Oerther, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Mitigating Frost Heave And Thaw Weakening In Roads Using Wicking Geotextile, Javad Galinmoghadam

Doctoral Dissertations

"Excess water is known to be the primary cause of soil and foundation problems. In cold regions, water-related problems are exacerbated by seasonal freezing and thawing cycles. Frost heave and thaw weakening is the leading cause of premature pavement failure and consume considerable budgets of the Department of Transportations in cold regions. The first step to designing mitigation measures is the ability to predict frost heave under different conditions. This study aims to introduce a new method for quantifying frost heave using a prediction model based on the state surface approach. This proposed model addressed many inconsistencies and limitations of …

Effects Of Peel Angle And Strain Rate On The Bond Between Frcm Composite And Concrete Substrate, Lucas Robert Gervais

Electronic Theses and Dissertations

Fiber-reinforced cementitious matrix (FRCM) composites have gained increasing attention for the rehabilitation and strengthening of concrete and masonry structures due to their favorable mechanical properties, compatibility with existing substrates, and ease of application. The effectiveness of any strengthening procedure depends on the quality of the bond between the external reinforcement and the substrate, ensuring efficient stress transfer and enabling the system to reach its ultimate capacity without premature debonding. While research has focused on the bond performance of FRCM systems under pure shear loading and quasi-static, low strain rate conditions, the effects of mixed-mode loading and high strain rates representative …

Characterization And Modeling Of Properties Of Unsaturated And Partially Damaged Cement-Based Materials, Rezwana Binte Hafiz

Doctoral Dissertations

"Transport properties, governing the resistance of cement-based materials to harmful substances are essential considerations for long-term performance. This study addressed the often-overlooked dimension of transport properties in unsaturated cement-based materials, crucial as most concrete structures face variable environmental conditions, leading to partial saturation. A two-scale model was introduced, enhancing our comprehension of transport properties in conditions reflecting real-world scenarios. Empirical correlation representing bulk paste characteristics was established, facilitating the upscaling of properties to mortar and concrete. The model was extended to predict the transport properties of mortar as well.

Environmental factors can contribute to the degradation of cement-based materials, with …

Exploring The Feasibility Of Innovative Integration Of Phase Change Materials For Thermo-Adaptive Asphalt Pavements, Farshad Saberi Kerahroudi

Doctoral Dissertations

"Current research examined the feasibility and efficiency of employing phase change materials (PCMs) in asphalt pavement materials to result in thermo-adaptive asphalt pavement. The PCM was introduced to the asphalt materials in three different scales, including asphalt binder, asphalt mastic, and asphalt mixture. After investigating asphalt at different scales, mix blending method was found as the easiest method without any complexity to mix asphalt binder with PCM. The testing results could reveal an improvement in the high temperature performance of asphalt binder without sacrificing the low temperature performance with the presence of PCM and Gilsonite. Also, introducing PCM to asphalt …

Design, Fabrication, & Laboratory Testing Of A Strain Gage Instrumentation System For Marine Applications, Salem C. Homrighausen

UNF Graduate Theses and Dissertations

A strain gage-based instrumentation system was designed and fabricated to measure the moment present at the base of a mock, diesel-engine snorkel for a submerged vehicle designed to operate in the surf zone. Afterwards, a lab experiment was designed and executed to determine the accuracy of the instrument and a 2-dimensional, matrix-vector equation was formulated to relate pairs of voltages, Vx and Vy, to moments, Mx and My for the experiment. Three versions of this model were built. The first model was created using traditional statics equations governing strain, stress, moment, force. The second and third models were built directly …

Assessment Of Wave Climate Conditions At An Important Historical And Ecological Site Along The Fort George River In Northeast Florida, Ally O. Kasuwi

UNF Graduate Theses and Dissertations

This study investigated wave climate conditions at the Timucuan Preserve in northeast Florida, addressing gaps in previous shoreline erosion research that largely attributed erosion to boat wakes without detailed wave data. Field data were collected using several do-it-yourself water wave gauges. Each data collection event was for approximately one week, with an emphasis on collecting data before, during, and after periods of expected peak wave activity (i.e., holiday weekends and large-scale storms). Data were analyzed in the frequency domain to establish the likely cause of waves. Results suggested that, counterintuitively, watercraft traffic may have produced higher dominant wave periods than …

Performance And Environmental Impact Of Waste Glass Asphalt In Cold Regions, Kai Xin

Dissertations, Master's Theses and Master's Reports

The reuse of waste glass in asphalt mixtures has significant potential in sustainable pavement engineering, yet its performance under cold, freeze–thaw conditions remain underexplored. This dissertation presents a first-of-its-kind comprehensive evaluation of glass asphalt for cold regions, simultaneously assessing its low-temperature cracking resistance, moisture susceptibility, field performance, and life-cycle environmental impacts. A series of laboratory tests were performed on asphalt mixtures incorporating various proportions of crushed waste glass aggregate, including Disk-Shaped Compact Tension (DCT) and Indirect Tensile (IDT) tests for low-temperature fracture resistance, and Tensile Strength Ratio (TSR) and Hamburg Wheel Tracking (HWTT) tests for moisture damage and rutting susceptibility. …

Estimating Unconfined Compressive Strength (Ucs) Of Rocks From Measurement While Drilling (Mwd) Data, Can Erdem

Dissertations, Master's Theses and Master's Reports

Measurement-while-drilling (MWD) technology enables the real-time monitoring of drilling parameters during the drilling process. MWD data can provide valuable insight into the mechanical behavior of intact rocks and rock masses, which is essential for geotechnical applications such as foundation design and underground construction. The aim of this study is to correlate real-time drilling parameters, recorded using a laboratory-developed MWD system, with the unconfined compressive strength (UCS) of rocks. A custom laboratory MWD system was designed to simultaneously record four key drilling parameters: thrust (axial force, crowd), torque, penetration rate, and rotational speed. The custom-built MWD system was used to continuously …

Innovations In Balanced Mix Design: Establishing Gwp Thresholds For Various Nmas And Evaluating Superpave Vs. Bmd In High Content Rubber Asphalt, Kai Xin

Dissertations, Master's Theses and Master's Reports

Traditional volumetric asphalt mix design methods, such as Superpave, frequently struggle to address critical performance parameters, leading many agencies to seek more robust approaches. Balanced Mix Design (BMD) has emerged as a forward-looking alternative by directly measuring rutting and cracking resistance in the laboratory. In this study, BMD principles were applied to asphalt mixtures featuring three distinct NMAS mixes and two high content rubber mixes, introduced through both dry and semi-wet processes. Compared with conventional volumetric constraints, BMD provided greater flexibility in adjusting binder content and gradation to accommodate elevated crumb-rubber levels. The resulting mixtures satisfied both rutting and cracking …