Civil Engineering Commons^™

Digital Twin Use Case At El Paso International Airport, Matyas Mori

Open Access Theses & Dissertations

This thesis explores the potential of implementing Digital Twin technology in airports, with a concrete use case at the Innovation Factory at El Paso International Airport. The Digital Twin model was developed using project documentation and LiDAR scanning, resulting in point cloud datasets that served as the foundation for further analysis. A comparison was conducted between reality-captured data and the model created from project documentation, highlighting the presence of noise in the field data. This analysis revealed key challenges and identified opportunities to enhance efficiency through automation. Instead of relying on a resource-intensive manual process to clean point cloud datasets …

Charging Infrastructure Needs For Electric Trucks In Texas, Katerina Jilkova

Open Access Theses & Dissertations

This thesis focuses on the design of a methodology for determining the optimal location of charging stations for heavy-duty electric trucks. The work focuses primarily on long-distance trips that require charging the truck battery outside cities, where the range of charging stations is not extensive. In addition to design the algorithm, the thesis also focuses on implementing the algorithm on a specific case - the implementation of charging stations in the I-10 Freeway corridor between El Paso and San Antonio. The output of the work is not only a description of the procedure, but also an application to a real …

A Study Of Air Voids And Effective Air Voids In Hot Mix Asphalt (Hma), Dasina Francis

Open Access Theses & Dissertations

Air voids are a fundamental parameter in the mix design of Hot Mix Asphalt (HMA), as they directly influence performance characteristics such as durability, permeability, and aging. Typically estimated using bulk and maximum specific gravity measurements, accurate determination of air voids is critical, given that laboratory samples are compacted to target void levels. This study investigates the influence of aggregate gradation and asphalt content on air voids, effective air voids, and specific gravity parameters - including bulk, apparent, and maximum specific gravities - in both fine- and coarse-graded HMA mixtures. Experimental testing included the determination of bulk, apparent, and maximum …

Wind-Induced Gravel Blow-Off: Experimental Investigations And Predictive Modeling For Resilient Roof Design, Md Safwan Ahsanullah

All Dissertations

Roof gravel blow-off during severe windstorms is a major hazard, leading to roof damage and significant downwind impacts. Understanding the initiation mechanisms for gravel blow-off is critical for improving building design and mitigating windborne debris risks. Existing experimental data on the wind speed required to initiate gravel blow-off have been collected from high-speed, full-scale tests at wind tunnels. While these tests form the basis of current design guidelines, they are expensive and can lack generalizability. As a result, rooftop gravel is frequently blown off at wind speeds below the design thresholds. This dissertation investigates the onset of rooftop gravel motion, …

Use Of Pushed-In Pencel Pressuremeter Test For Shallow Foundation Design In Florida Fine Sands, Brhane Weldeanenya Ygzaw

Theses and Dissertations

A comprehensive evaluation was conducted on the performance, consistency, and practical application of various in-situ geotechnical testing methods for predicting the settlement and bearing capacity of shallow foundations in Florida’s fine sands. The methods assessed include the Standard Penetration Test (SPT), Cone Penetration Test (CPT), Dilatometer Test (DMT), pushed-in PENCEL Pressuremeter Test (PPMT), and the pre-bored TEXAM Pressuremeter Test. A dual approach controlled indoor testing at the FDOT State Materials Office (SMO) and field investigations at three representative sites (Kingsley, Trenton, and the UCF research site), formed the experimental foundation.

Over thirty settlement prediction techniques and thirteen bearing capacity estimation …

Cross-Frame Effects And Design Optimization For Skewed Steel I-Girder Bridges, Nisha Sthapit

Theses and Dissertations

Cross-frames are critical for load distribution and stability in steel I-girder bridges with complex geometry, especially during construction. However, they are often designed with standardized cross-sections that are uniform throughout the bridge. This thesis presents an optimization approach for cross-frame cross-sections for skewed steel I-girder bridges with integral and stub abutments with skews ranging from 15⁰-60⁰. This optimization, using Method of Moving Asymptotes (MMA), minimizes girder flange lateral bending stress while maintaining or reducing the total volume of the cross-frames from the original design. Validated 3D finite element models in CSI Bridge showed that the optimization achieved around 20% decrease …

Towards Advancing Streamflow And Peak Flow Prediction With Machine Learning: Identifying Infrastructure At Risk, Sudan Pokharel

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Due to climate change and its impact, the need for adaptive strategies for natural disaster mitigation and resource management has never been more urgent. Central to this is water resource management, which is essential for sustainable human activities, ecological balance, and the mitigation of natural hazards like floods. Streamflow is a crucial element of water resource management and plays a vital role in planning and building water infrastructure, implementing emergency response plans, supporting flood mitigation initiatives, and regulating agricultural and industrial use. However, accurate prediction of streamflow still remains a challenge due to the complex non-linear and non-stationary interaction between …

Mash Crashworthiness Of Work Zone Devices And Breakaway Luminaire Poles, Mohammadreza Rajaee

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

This thesis presents a study on the crashworthiness of two commonly-used roadside safety devices: Type II barricades and luminaire poles supported by TB1-17 transformer bases. The first part focuses on designing and evaluating a non-proprietary, Type II barricade that meets MASH criteria. A validated LS-DYNA model, based on a previously-tested Type III barricade, was used to guide the design. The proposed Type II system was evaluated through simulation and confirmed with full-scale crash testing. The second part of the study investigates luminaire poles supported by the TB1-17 transformer base. A previously-developed LS-DYNA model was updated and validated using test No. …

Development Of Timber Bridge Railing And Approach Guardrail Transition, Aaron Lechtenberger

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Timber bridges with transverse and longitudinal bridge decks are increasingly utilized across the United States. However, limited research exists to develop bridge railing systems for high-service-level roadways that meet current vehicular impact safety standards. In response to this gap, the United States Department of Agriculture - Forest Service -Forest Products Laboratory (USDA-FS-FPL), in collaboration with the Midwest Roadside Safety Facility (MwRSF), initiated a research program to develop, crash test, and evaluate higher-service-level bridge railings and approach guardrail transitions (AGTs) compliant with the American Association of State Highway and Transportation Officials (AASHTO) Manual for Assessing Safety Hardware (MASH).

This study continued …

A Framework For Quantifying The Benefits Of Electric Vehicle Infrastructure Development, Donya Negahbani

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Under the Biden Administration’s Justice40 Initiative, a significant portion of benefits derived from federal clean transportation investments is required to be directed to disadvantaged communities. Meeting this mandate necessitates a transparent and reproducible approach that quantifies various dimensions of value and allocates them equitably. This dissertation presents a flexible framework specifically tailored for the deployment of electric vehicle charging infrastructure in Nebraska, effectively translating equity goals into rigorous spatial and economic analyses. The framework first identifies multiple distinct categories of benefit that reflect the societal value of charging access: energy savings, economic opportunities, environmental quality enhancements, and public health improvements. …

Performance Evaluation Of Highly Modified Asphalt-Based Binders In High Friction Surface Treatment: Comparative Study With Epoxy-Based System, Alireza Roshan, Magdy Abdelrahman, Mohyeldin Ragab

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High Friction Surface Treatments (HFSTs) are frequently used to increase skid resistance and reduce collisions, particularly in crash-prone zones, including horizontal curves and intersections. Epoxy-based binders traditionally have been the sole option for HFSTs, but their drawbacks, such as high costs and compatibility challenges, have led to the search for substitute binders, including asphalt-based options. This study investigates the comparative performance of highly modified asphalt-based binders, including polymer-modified, mastic, and highly modified emulsions, in HFST applications using two aggregate types, Calcined Bauxite (CB) and Rhyolite with different gradations, with an emphasis on their frictional properties, durability, and resistance to polishing. …

Bim Assessment For State Departments Of Transportation, Francisco Israel Guillen

Open Access Theses & Dissertations

Building Information Modeling (BIM) has been used by the Architecture, Engineering, and Construction (AEC) industry to enhance the efficiency and quality of work across various stages, including planning, design, construction, and operation and maintenance (OM) of projects. Despite widespread adoption in vertical construction, BIM implementation in infrastructure projects is still falling behind. This disparity can be attributed to several factors, including the complexity and scale of infrastructure projects and varying levels of BIM adoption and integration within organizations. Efforts to standardize BIM practices and enhance the digital capabilities of infrastructure projects are essential to bridge this gap and ensure the …

Improving Traffic Management During Special Events At The Sun Bowl Stadium, Marek Polak

Open Access Theses & Dissertations

This thesis focuses on improving traffic conditions around the Sun Bowl Stadium, especially during large public events. The goal is to propose effective solutions that enhance the use of public infrastructure during both event days and normal traffic conditions. To understand the current situation, two surveys were conducted during a football game - one monitoring parking lot occupancy and the other measuring traffic volumes using video recordings and pressure sensors. Based on the collected data, design changes were proposed for two key intersections: Sun Bowl Dr. with W. University Ave., and Sun Bowl Dr. with Glory Rd. The new designs …

Feasibility Of On-Demand Charging For Private Evs At The El Paso International Airport, Katerina Zizalova

Open Access Theses & Dissertations

As electric vehicle adoption rate continues to grow globally and across the United States, it is desirable for airports to adapt to meet the needs of electric vehicle driving passengers. This thesis develops an implementation plan for an on-demand charging solution for the El Paso International Airport to address the current limitations in charging infrastructure. After analyzing the electric vehicle adoption trends, four charging solutions were studied: conventional fixed-point charging, fixed-point charging with added valet service, mobile charging service and wireless inductive charging. Using decision-making matrices implementing criteria such as operational suitability, scalability or costs, one charging solution was recommended …

Building Resilience: Strategies For Sustainable Wildfire Management In California, Jaiden Rennie, Pegah Zamani

Symposium of Student Scholars

Wildfires in California are becoming more intense and destructive, threatening communities, ecosystems, and livelihoods. This project explores how resilience and sustainability can work together to reduce wildfire risks and long-term damage. By reviewing research, case studies, and expert insights, it examines what’s driving these fires, climate change, poor land management, and human activity, and looks at solutions that can make a real difference. From community education programs to AI-driven fire detection and smarter policies, the findings highlight practical ways to better prepare for and manage wildfires. The goal is to contribute to a future where communities and the environment are …

Comparative Analysis On Design Error Risks In Design-Bid-Build And Design-Build Construction Approaches, Eradius Edward Rwakarehe

Tanzania Journal of Engineering and Technology (TJET)

This study was conducted to compare design errors risk in Design-Bid-Build (DBB) (traditional) and Design-Build (DB) methods in building projects. Several construction projects under both DB and DBB method were reviewed. On most of construction projects under DB method, it was found that there were over supply of floor area due to different reasons. Also, it was found that, clients’ requirements were changed during project execution, which resulted into change on schedule, contract value and project quality. It was also revealed that in most cases, designs were in accordance with the clients’ requirements as submitted earlier but during construction clients …

Flood Inundation Mapping For The Tana River Delta In Kenya, Anne N. Mugatha

Tanzania Journal of Engineering and Technology (TJET)

This study aimed at mapping flood inundation areas in the Tana River Delta. The 30 m DEM and digitized streams and road networks data were collected through remote sensing techniques followed by ground truthing. The data used also included Tana River discharge data at Garsen gauging station. Probability distributions were fitted on the annual maximum discharges. The 4 parameter generalized Gamma probability distribution was the best-fitting distribution according to goodness-of-fit criteria and the Q-Q plots and was used to generate the flood quantiles for different return periods. The generated flood quantiles were; 286 m3/s, 369 m3/s, 400 m3/s, 405 m3/s, …

Pros And Cons Of Preservation Treatments, Buzz Powell

Local Transportation Asset Management Conference

No abstract provided.

Travel Behavior Study On Shared Micromobility Service, Yixiang Teng

Lyles School of Civil Engineering Graduate Student Reports

This study investigates the travel behavior on the shared micromobility service around Purdue University West Lafayette campus area. It aims to understand the shared micromobility user patterns and identify the barriers of adoption. The study was enlightened by the influence of pandemic on transportation choices and the shift on transportation habits, and the gap identified was the understanding of the college related population. The research method was a constructed survey distributed among Purdue University’s students, faculties and staffs. A total of 143 valid responses were collected, comprising 73 current users and 70 non-users. Results indicate that shared micromobility is primarily …

Evaluation Of Chloride Diffusion In Concrete Using Bulk Diffusion Test And Scanning Electron Microscopy, Payton Davis

Doctoral Dissertations and Master's Theses

Reinforced concrete is one of the most widely used construction materials in the world with many bridges and other major infrastructure consisting of such structural elements. A primary concern impacting the durability of concrete is chloride penetration in aggressive environments such as marine or coastal areas. In such environments, chloride ions can penetrate into the pores of concrete leading to the corrosion of embedded steel reinforcement which compromises the structural integrity of concrete. To investigate the issue, a comprehensive experimental program was designed and implemented which involved the preparation and testing of 31 different concrete mixes, each incorporating varying proportions …

Examination Of A Bench-Scale Model For Post-Wildfire Flood And Water Quality Mitigation Solutions, Cheyenne Ethridge

Honors Theses

The objective of this study is to determine a potential low-cost, sustainable, and rapidly deployable solution for post-wildfire flood and water quality mitigation in communities reliant on surface water for drinking water. Coalinga, Fresno County, California was selected as a study area for a full-scale solution due to its high risk of wildfires, high social vulnerability, and relatively low community resilience. A bench-scale demonstration of the system directs water into a gravel infiltration zone surrounded by a weir perimeter and followed by a clarifier. Because of their abundance in the area, almond shells were explored as a coagulant additive to …

Selective Lithium Extraction Using Ion-Sieves From Geothermal Brine, Agyare Asante, Abigail Berardi, Jayla Standin, Elliott Walker, Ujjwal Pokharel, Sandeep Kumar

Graduate Student Government Association Research Conference

Lithium (Li) is a critical component in modern green energy technologies, serving as the cornerstone for advanced batteries used in electric vehicles, renewable energy storage, and portable electronics. To address the increasing global demand for lithium, this study explores the synthesis and performance of ion-sieve novel adsorbents derived from the spinel-type precursor Li₄Mn_4.5Zr_0.5O₁₂ (LMZO). The precursor was produced using an economical solid-phase reaction that involved lithium, manganese, magnesium, and zirconium salts. This was followed by a two-stage calcination process involving 200 K for 2 hours and 450 K for 24 hours. Acid activation …

Establishing Particle Size Recommendations For Cationic Asphalt Emulsions, Tanner Turben, Pedro Diaz-Romero, Andrew Braham

Civil Engineering Faculty Publications and Presentations

Asphalt emulsions are used in flexible pavement maintenance and rehabilitation treatments. Emulsion specifications for material characterization are based on testing methodology dating to the 1930s. Newer test methods, including particle size analysis (PSA) of binder droplets in emulsion, have been explored but not implemented into specifications. The objective of this study is to observe the particle size and performance of cationic slow-setting (CSS) emulsions and establish baseline particle size recommendations for cationic emulsions. Four physical property tests (residue, oversize particles, viscosity, and particle size) and two cold mix asphalt performance tests (indirect tensile strength (IDT) and direct shear test (DST)) …

Bayesian Belief Networks Approach To Prioritize Road Safety Mitigation Measures For Eco-Mobility Modes, Fatmah Mohamed Alyammahi

Thesis/ Dissertation Defenses

This study presents a novel approach to prioritizing road safety mitigation measures for eco-mobility modes in Abu Dhabi, employing a sophisticated Bayesian methodology integrated with cost-benefit analysis. The research addresses the pressing need for enhanced safety in sustainable urban transportation, focusing on pedestrians, cyclists, and users of micro-mobility devices. A comprehensive Bayesian Belief Network (BBN) model was developed, incorporating key variables influencing eco-mobility safety, including visibility, predictability, road curvature, obstructions, and lighting conditions. The model was constructed using a combination of historical accident data and Probabilistic reasoning. This approach allowed for the quantification of complex relationships between various risk factors …

Polymetal Phosphate Cement From Tin Fuming Furnace Slag: Hydration Mechanism, Mechanical Performance, And Environmental Safety, Peiwen Lv, Xintao Zhou, Zhongqiu Luo, Cuirong Yan, Xiunan Cai, Ting Huang, Pingyan Wang, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Phosphate cement materials are ideal binders for the rapid repairment of civil engineering and solidification/stabilization of hazardous solid wastes due to their fast setting, high early strength and strong adhesion. However, the use of pure metal oxides as the raw base materials and their deactive pretreatment result in the high cost and energy consumption, limiting its broad applications. In this study, an eco-friendly polymetal phosphate cement (PMPC) was developed using tin fuming furnace slag (TFFS) as the primary base material. The hydration behavior, microstructure, mechanical properties, and environmental safety of PMPC were comprehensively evaluated. The results showed that the hydration …

Design Of A Retaining Wall For M-10 Freeway, Anthony Paul

Honors Theses

The M-10 Freeway, also known as the John C. Lodge Freeway, is bordered by retaining walls at the project location, one section of which required replacement to meet safety and serviceability standards. Located in Detroit, Michigan, this project focused on the redesign and replacement of a 300-foot section of retaining wall along the southeast-bound lanes of M-10, between Curtis Street and Outer Drive. The 20-foot-tall retaining wall also supports traffic loads from the overhead James Couzens Freeway. Through geotechnical and structural design, several alternatives were developed and evaluated. A CIP concrete cantilever wall was selected with a height of 21 …

Evaluating Embodied Carbon Emissions Of Post-Seismic Steel Framed Buildings, Nicholas Leavitt

Student Research Symposium

The carbon emissions of earthquake damage repairs is on average 40% of a building's total carbon emissions in 50 years.

Workforce Forecasting For State Transportation Agencies: A Machine Learning Approach, Adedolapo Ogungbire, Suman Mitra

Civil Engineering Faculty Publications and Presentations

A decline in the number of construction engineers and inspectors at state transportation agencies (STAs) to manage the ever-increasing lane miles has emphasized the importance of workforce planning in these agencies. Forecasting workforce requirements is crucial for effective planning in any industry or agency. This study developed machine learning (ML) models to estimate the person-hour requirements of STAs at the project level. The Arkansas Department of Transportation (ARDOT) was used as a case study, using its employee and project details data between 2012 and 2021. ML regression models ranging from linear, tree ensembles, kernel-based, and neural network-based models were …

Wind-Resilient Solar: Harnessing Cfd For Enhanced Load Estimation, Aly Mousaad Aly

Faculty Publications

Solar panels are a cornerstone of renewable energy infrastructure, playing a pivotal role in global sustainability efforts. To ensure their resilience and long-term viability, accurate wind load estimations are essential for designing supporting structures, which account for nearly 50% of their total cost. However, traditional building codes lack comprehensive guidance for solar panels, resulting in inconsistent estimations due to discrepancies in scaled wall-bounded wind tunnel testing methodologies. These inaccuracies pose safety risks, increase costs, and hinder adoption. Emerging technologies like computational fluid dynamics (CFD) simulations offer a promising alternative by enabling full-scale analysis under realistic conditions of complete turbulence. This …

Advancing Solar Farm Resilience: Cfd-Driven Wind Load Optimization, Aly Mousaad Aly

Faculty Publications

This study investigates wind load design methods for ground-mounted solar panels and arrays by comparing Computational Fluid Dynamics (CFD) simulations with design standards. A case study of a solar farm impacted by Hurricane Maria examines the effects of elevation height, tilt angle, and variations in the American Society of Civil Engineers (ASCE) standards on wind loads and structural failure. Turbulence models, including Reynolds Stress Model, k–ε Model, and Large Eddy Simulation (LES), are used to analyze wind pressures, lift, drag, and peak pressures. Results show Phase 1 experienced higher wind loads than Phase 2 due to design differences. A cost-benefit …