Civil Engineering Commons^™

Relationship Between Standardization Critical Success Factors (Csfs) And Project Performance, Binit Kumar Shrestha

UNLV Theses, Dissertations, Professional Papers, and Capstones

Facility standardization strategy is defined as the development and use of consistent designs to align project stakeholders, objectives, and scope to capture and optimize schedule, cost, and value. The implementation and proper execution of this strategy can lead to considerable benefits, such as design once and reuse multiple times, along with learning curve benefits in fabrication, operations, and construction, as well as accelerated responds to schedule needs. Although standardization strategy is not a new idea; capital projects have failed to achieve high levels of facility standardization. The primary reason for this is the industry’s struggle to execute standardized projects successfully. …

Assessing The Impact Of Health Benefits And Carbon Footprint In Student Parking Decisions At A University Campus, Emiliano Ruiz

Open Access Theses & Dissertations

In the student parking location problem, traditionally, the parking permit cost, the last-mile travel time, and the ease of finding an available parking stall are the only decision criteria driving permit purchases. However, a studentâ??s choice of parking location has associated walking health benefits and sustainability impacts. These impacts are related to the walking distance from the parked vehicle to the final destination on campus, in addition to the location effect on the carbon footprint of a vehicle-trip taken to campus. As such, this Thesis examined a multi-criteria decision approach to a university studentâ??s choice of parking location. This approach …

Prediction Of Uniaxial Compressive Strength Of Granite Rock Samples Of Lugoba Quarry Using Rebound Hammer Test, Moses Kongola, Karim Baruti

Tanzania Journal of Engineering and Technology (TJET)

Rebound hammer test is widely used as an indirect measure of uniaxial compressive strength for engineering materials such as concrete, soil, and rock in both civil and mining engineering works. In quarries, uniaxial compressive strength is a crucial parameter in the analysis of geotechnical problems involving rock stability and rock blasting design. This study aims at establishing the empirical models of uniaxial compressive strength fits on rebound hammer number that can be used to predict uniaxial compressive strength of granitic rock at Lugoba Quarry. Data for direct uniaxial compressive strength were obtained from uniaxial compressive strength test carried out on …

Prediction Of Four-Days Soaked California Bearing Ratio (Cbr) Values From Soil Index Properties, Pascal Ambrose, Siya P. Rimoy Dr

Tanzania Journal of Engineering and Technology (TJET)

California Bearing Ratio (CBR) laboratory testing is the conventional method for determining soaked strengths of pavement subgrades. The test requires careful preparation of soil samples followed by four days of water soaking before penetrating the samples using a standard plunger at prescribed rates to set depths. When the number of samples becomes large the determination of soaked CBR values becomes cumbersome as the test is laborious and time consuming. This study aimed at establishing an alternative way of determining soaked CBR by developing a model that would be used for estimating soaked CBR of fine- and coarse- grained soils without …

‘Serene Classroom’ Minimizes Noise For More Conducive Learning, Zaiton Haron, Khairulzan Yahya, Nadirah Darus, Rafidah Mohd Yussup, Abdullah Zawawi Awang, Norelyza Hussien, Ain Naadia Mazlan, Rozana Zakaria, Mohammad Ismail, Noramera Nabila Amir Nizam, Ahmad Syakir Farhan A Kassim, Nur Syalyana Malek, Rifa Rafida Rifki, Helmi Kamaludin, Syamsul Hafiz Yaakob, Zaliza Haron, Sheikh Izat Azhar Sheikh Ahmad

ASEAN Journal of Community Engagement

Noise pollution can be categorized as a danger in silence. In school, noise pollution inhibits the focus of learning, impairs learning and cognitive development, for example, students' skills to think and understand both oral and written comprehension may be hampered by noise. Many schools in Malaysia experience excessive noise pollution as their locations are very near busy roads. This will be one factor that hinders the implementation of the education system in producing holistic students in order to prepare for the 4IR era. Knowing the importance of this problem, a group of researchers from UTM GREENPrompt, School of Civil Engineering, …

Prioritization Of Research On Bridge Railings For Use On Timber Deck Bridges And Development Of Two Glulam Bridge Railing Systems, Jared Duren

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

In the past, many timber bridge railings, bridge railings for use on timber deck bridges, and approach guardrail transition systems to accompany these railings, have been developed to meet different impact safety criteria. Through an extensive literature review, the design details of these systems were identified and organized. A survey was then developed and distributed to multiple government agencies and timber industry members to identify their desire for these bridge railing and approach guardrail transition systems to be developed to meet current American Association of State Highway and Transportation Officials (AASHTO) Manual for Assessing Safety Hardware (MASH) impact safety criteria. …

Establishing Safe Operating Speeds For Autonomous Vehicles: A Case Study From The Automated Skyway Express In Jacksonville, Florida, Andrew Loken

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Autonomous vehicles (AVs) differ significantly from traditional passenger vehicles in both their behavior and physical characteristics. As such, the validity of the guidance provided in the Manual for Assessing Safety Hardware, Second Edition (MASH 2016) is questionable in AV applications. Impact conditions specified in MASH 2016 are inextricably linked to the traditional vehicles underlying the estimates. For AV applications, conditions must be estimated from the ground up, stepping outside the guidance of MASH 2016. Herein, a method for evaluating existing infrastructure to support AV traffic is proposed. The method integrates traditional structural analyses with unconventional methods of estimating impact conditions. …

A Conceptual Framework For Phase-Dependent, Composite Flood Risk Index (Fri) Curves Based On The Relationship Between Temporal Probability Of Flood Occurring (Ph) And Flood Vulnerability Index (Fvi) Along With Maps Of Fvi Within The Amite River Basin Based On The August 2016 Flood., Austin S. Guerin Mr.

LSU Master's Theses

Efforts directed at determining community vulnerability to flooding are limited and only include economic (dollar damages) and public safety impacts and do not consider the phase dependency of the system, i.e., pre-, during- and post-storm, both critical shortcomings for more broadly assessing community risk and developing comprehensive plans and mitigation strategies. This thesis first develops a framework based on a Flood-Vulnerability Index (FVI) approach and then demonstrates its usefulness, at the census tract level of detail, for three parishes in the Greater Baton Rouge, LA area, based on the August 2016 flood. FVI’s indicators are multidimensional and phase dependent: “Pre-Flood” …

Wip: Halting Attrition In Civil Engineering Programs Through Lower-Division Engagement Course Implementation, Briceland Mclaughlin, Nick Hudyma, Robert Hamilton, Bhaskar Chittoori, Mojtaba Sadegh, Sondra M. Miller

Civil Engineering Faculty Publications and Presentations

This work in progress paper will describe how a department of civil engineering has built 1-credit engagement courses into the first two years of a new curriculum design to increase retention rates, create a sense of belonging, showcase civil engineering principles and practicality to non-majors, and begin engaging alumni and local civil engineering professionals.

Retention is a core issue for academic departments in the STEM fields. In civil engineering, we have seen a large number of students depart the major each fall and spring semester for various, preventable reasons. This is true for traditional, non-traditional, and transfer students alike. Students …

Long Term Impact Of New Jersey National Summer Transportation Institute Hosted At Rowan University On Career Choices Of Cohorts (Evaluation), Kristine Rivera, Ayman Ali, Yusuf Mehta, Shivani D. Patel

Henry M. Rowan College of Engineering Departmental Research

In the summer of 2017, 2018, and 2019, the Center for Research in Education in Advanced Transportation Engineering Systems (CREATEs) at Rowan University hosted the National Safety Transportation Institute. The goal of this program is to provide an exposure to high school students to transportation engineering. More than 50% from underrepresented minority groups, including women, African American, and Hispanics/Latinos attended the twoweek program. In the summer of 2017 and 2019, the program was non-residential lasting four and two weeks, respectively. In summer 2018, the program was two-week residential. In all programs, the students got a chance to explore different modes …

Integration Management: A Bibliometric Study Of Research Trends, Shabir Hussain Khahro, Ayaz Babar, Fida Hussain Siddiqui, Tauha Hussain Ali, Ali Raza Khoso

Library Philosophy and Practice (e-journal)

Integration management has always been a topic of interest for researchers. It plays a significant role in the success of the projects. Integration management effectively incorporates all the aspects of projects and provides a roadmap towards their success. Based on the significance of the term, this paper assesses the research output of integration management since 1970 in different fields of the application using the Scopus database. The data was collected and analyzed through Microsoft Excel to analyze the research publications trend line, publication types and their access to the audience, organizations and countries involved, languages of publications, authors participating, and …

Finite Element Numerical Modeling And Parametric Study Of Geosynthetic Reinforced Pile-Supported Embankments, Abdallah Ikbarieh

LSU Master's Theses

This study directed at investigating the performance of the pile-supported embankment system utilizing a geosynthetic reinforced load transfer platform (GRLTP) using Finite Element numerical modeling. A 2D Finite Element Modeling (FEM) methodology was first developed using PLAXIS 2D 2021 computer software and verified by well-documented case studies in the literature of this system. Second, a performance prediction was made for a field case study of the Amite River Project near French Settlement, which is located along Route LA 16 Livingston Parish in Louisiana State. A comprehensive FEM parametric study was then carried out to evaluate the performance of the system …

Kinematic Demands On Pile-Supported Wharves Due To Liquefaction-Induced Lateral Ground Deformations, Thomas John Torkelson Ii

Dissertations and Theses

Kinematic demands from lateral soil deformations can be a major cause of damage to maritime and highway transportation structures such as wharves, ports, and bridges. Data from five centrifuge tests on pile-supported wharves were used to evaluate the accuracy of Newmark Sliding Block Analysis in estimating the kinematic demands on piles. The piles in the centrifuge tests were subjected to varying degrees of liquefaction-induced lateral ground deformations. Pile-pinning effects were included in the analysis by incorporating the lateral pile resistance in the limit-equilibrium slope stability analysis. The results of the analysis have shown that the median Newmark displacements better estimated …

An Improved Earned Value Management Method Integrating Quality And Safety, Brian Briggs

LSU Doctoral Dissertations

The construction industry invests significant time and money to improve quality and safety while reducing cost and schedule impacts. The industry has a sincere desire to improve construction project management methods to improve efficiency. Historically, quality and safety underperformances result from undermanaged quality control and safety activities. The cost and schedule impacts associated with poor quality work have always had an impact on construction operations. The unprecedented challenges and uncertainties of COVID-19 highlighted the need to improve the Earned Value Management (EVM) method within construction to reflect these quality and safety activities. The central goal of this dissertation is to …

Assessment Of Long-Term Performance Of Pavements Containing Warm Mix Asphalt Technologies In Louisiana, Kwadwo Ampadu Boateng

LSU Master's Theses

This study focused on the assessment of long-term performance of asphalt pavements containing warm mix asphalt technologies in Louisiana. A total of five rehabilitation projects were studied in the state of Louisiana. The study consisted of engineering desk analyses of field performance indicators, indices and the initial laboratory performance indicators measured for five rehabilitation projects.

The engineering desk study consisted of a review of literature from previous WMA technology projects done in Louisiana. Additionally, data was acquired and validated from the Louisiana Pavement Management System (PMS). Pavement performance indicators (i.e., cracking (transverse, longitudinal, and fatigue cracking), roughness, rutting, and pavement …

Field Trials And Long-Term Monitoring Of Microbially-Induced Desaturation For The Treatment Of Liquefiable Silty Soils, Kayla Rae Sorenson

Dissertations and Theses

Earthquake liquefaction hazards in silty soils are a critical problem in Portland, Oregon, and other areas around the world. This is a particular problem for existing facilities founded on liquefiable soils, for which there exists no cost-effective liquefaction mitigation solution at the present time. It is essential from both a seismic safety and a seismic resilience perspective to be able to mitigate potentially liquefiable soils underneath existing structures, and to do so in a cost-effective manner. Recent studies suggest that liquefaction mitigation using microbially-induced desaturation (MID) may provide this capability.

The objective of MID is to reduce earthquake-induced excess pore …

Using Quantitative Stereology On High Resolution Sem Images To Estimate Diatom Percentages, Ariadna Covarrubias Ornelas

Dissertations and Theses

Diatoms are single-celled organisms of various shapes and sizes typically found in aquatic environments. When diatoms die, the organic material decomposes, and the outer skeletons (i.e., frustules) settle and accumulate as sedimentary deposits. These soils, called diatomaceous soils, exhibit nontraditional behavior since the diatom particles are typically hollow skeletons composed of amorphous silica with intricately patterned and abrasive surfaces. Recent studies have shown that diatomaceous soils are challenging geomaterials since even a small percentage of diatom particles will notably affect engineering behavior. Furthermore, laboratory studies on diatomaceous soil mixtures have demonstrated that many engineering soil properties depend on the percentage …

Probabilistic Analysis Of The Active Earth Pressure On Earth Retaining Walls For C‑Φ Soils According To The Mazindrani And Ganjali Method, Julian Osorio, Juan Camilo Viviescas, Juan Pablo Osorio

Articles

The determination of the earth pressure coefficients (K) in geotechnical engineering is one of the most critical procedures in designing earth retaining walls. However, most earth pressure theories are made for either clay or sands, where the c-ϕ soils are the least analysed. In this paper, an analysis of the earth pressure for drained mixed soils based in Mazindrani and Ganjali (J Geotech Geoenviron Eng 123:110–112, 1997) theory was carried out. Earth pressure coefficients are generally used in a deterministic way and can represent designs under an inadmissible risk. Therefore, Reliability-based design arises as an essential tool to deal with …

Dynamic Hvac Energy Management Using Commercial Building Occupancy Metrics & Neural Networks, Krishna Chaitanya Jagadeesh Simma

Civil Engineering ETDs

With the rise of technology use in buildings, it is now possible to collect data that can be used to improve building energy consumption. One factor that has significant impact on building energy consumption is occupancy. Recent studies have shown promising results in obtaining occupancy information from existing infrastructure such as WiFi router networks. However, these existing frameworks require additional investments through software upgrades, added infrastructure, computational resources, and may raise occupant privacy concerns. Additionally, with occupant thermal comfort statistics being lower than ASHAREA specified standards, a novel approach for indoor climate control is needed. To address the limitations in …

Propositions For A Resilient, Post-Covid-19 Future For The Aec Industry, Hala Nassereddine, Kyung Wook Seo, Zofia K. Rybkowski, Christian Schranz, Harald Urban

Civil Engineering Faculty Publications

The coronavirus outbreak has challenged and continues to challenge every aspect of the supply chain within the AEC industry, forcing stakeholders to cope with increasing uncertainties and continuous change. The notion of resilience is especially salient now. While the need for the AEC industry to focus on resilience has been highlighted in recent articles, there is a need for a comprehensive discussion on what resilience means for the AEC industry and how companies can create built-in resilience. This paper takes the form of a high-level overview of where the industry is headed and aims to establish eleven propositions for a …

Vertical Feature Delineation For Flood Hazard Assessments At The Coastal Land Margin, Shu Gao

LSU Doctoral Dissertations

Coastal and riverine flooding constitutes a major environmental hazard that affect millions of people residing along the world’s coastline. Improved understanding of the driving mechanisms that can cause flooding within coastal watersheds requires advanced hydrologic and coastal storm surge simulation. Such advanced simulation is dependent upon an accurate digital elevation model (DEM) for the optimal topographical representation of the true domain in the discretized model grid (mesh). However, it is not possible to afford mesh resolution as fine as contemporary DEMs, resolved at sub-10 meters, due to the impractical computational expense. Therefore, significant elevation barriers such as roadbeds, levees, railroads, …

The Environmental Benefits Of Implementing Green Roofs On City Skyscrapers, Jack Rich

Civil Engineering Student Work

No abstract provided.

Frequency Effect On Peak Pressure Coefficients Using The Narrowband Synthesis Random Flow Generator (Nsrfg) Method, Zayuris Del Carmen Atencio Mojica

Graduate Theses and Dissertations

The collapse of the Tacoma Narrows Bridge in Washington state in 1940 due to high wind forces gave structural engineers notice of the importance of understanding the behavior of wind forces on infrastructure. Wind forces play an important role in the design of buildings and other structures. ASCE 7-16 is the manual used for the design of these buildings and other structures throughout the country. These design criteria have been approved based on research projects involving experimental procedures. For the design of wind loads, ASCE 7-16 uses criteria based on wind tunnel (WT) tests. However, since the development of computing …

Applications Of Masw And Mhvsr Techniques For Infrastructure Evaluation With A Focus On The Effects Of Different Transformation Techniques And Near-Field Effects On Derived Dispersion Data, Salman Rahimi

Graduate Theses and Dissertations

This dissertation is aimed at understanding two aspects of active surface wave methods to improve the accuracy and reliability of this method. These include (1) the performance of four common wavefield transformation methods for the multichannel analysis of surface wave (MASW) data processing and (2) near-field effects. Toward this end, extensive field measurements were conducted considering different factors affecting these two topics. The MASW and microtremor horizontal to vertical spectral ratio (MHVSR) were then employed to examine their efficiency for infrastructure health monitoring.

Regarding the performance of the four common transformation techniques, it was observed that for sites with a …

Data-Driven Methods To Address Truck Parking Shortages For Long-Haul Commercial Truck Drivers, Sharif Mahmud

Graduate Theses and Dissertations

Truck parking is a critical concern for both the trucking industry and the truck drivers. Long-haul commercial truck drivers rely on safe and adequate parking to support interstate commerce, which has become a challenge due to parking shortages. The recent electronic logging device (ELD) mandate, forcing a strict compliance to hours of service (HOS) regulations, are leading to higher demand for parking. A number of federal, regional, and local studies reveal that truck activity will increase and truck parking demand will outpace parking supply in the coming years. Such parking shortages likely disrupt freight flows and pose risks to truck …

Mitigating Calcium Oxychloride Damage In Cementitious Paste And Concrete Utilizing Supplementary Cementitious Materials, Casey Jones

Graduate Theses and Dissertations

It is understood among engineers in the United States (U.S.) that improvement is needed throughout the transportation infrastructure. In the 2021 Infrastructure Report Card produced by the American Society of Civil Engineers, the roadways of this nation merit a D. This leaves room for improvement in order to provide durable pavements throughout this nation. Areas with significant winter weather may have exacerbated effects in decreased roadway longevity due to freezing/thawing cycles and the use of chemical deicers to mitigate gelid roadway conditions. Much research focuses on surface scaling and reinforcement corrosion using these materials; however, joint deterioration, due to chemical …

Response Modification And Seismic Protection Of Yielding Structures Equipped With Inerters And Hysteretic Dampers, Gholamreza Moghimi

Civil and Environmental Engineering Theses and Dissertations

This study investigates the seismic response of structures with sustainable, long-stroke response modification devices. The main thrust of the dissertation is the investigation of the seismic response of yielding structures equipped with supplemental rotational inertia, or inerters. The last chapter of this dissertation investigates the seismic response of multistory yielding steel structures equipped with pressurized sand dampers.

Inerters are mechanical devices with resisting force proportional to the relative acceleration of their end nodes. This class of response modification devices complements the traditional fluid viscous damping devices with resisting force proportional to the relative velocity at their end-nodes. Mass-amplification is the …

Determinants Of Water System Management, Caleb White

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Water system management is complex, involving state, local, and federal regulations and impacting people from a wide variety of socioeconomic backgrounds. Systems in the developing and industrialized worlds both face challenges in managing water systems. Much research has been completed regarding associations of water system violations and system factors, and there has been an increased attention to issues of environmental justice – how water system violations affect communities of color, impoverished communities, and rural communities. Currently no studies have focused on the associations between socioeconomic factors and water system management violations. The goal of this research was to ascertain the …

Fragility Functions Of Manufactured Houses Under Earthquake Loads, Shuyah Tani Aurore Ouoba

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Manufactured homes are factory-built homes made of wooden structural members, then transported and installed on a given site. Manufactured housing is used in many countries, such as in Australia, and in New Zealand but remain mostly popular in the United States. In 2020, nearly 22 million people were estimated to live in manufactured homes in the United States, with an increase of more than fifty percent in the shipment over the past seven years. However, performance observations from the last decades have shown the vulnerability of manufactured homes to extreme events, like windstorms and earthquakes. Damage assessments and post-event evaluations …

Impact Of Geomaterial Properties And Roller Parameters On Intelligent Compaction Measurement Values Using Lumped Parameter Modeling, Jesús Castro Pérez

Open Access Theses & Dissertations

Roads consist of layers of geomaterials and asphalt or concrete to provide an optimal service life according to their exposure to traffic and the environment. Each layer that forms a pavement structure requires achieving specific quality and mechanical properties that are often obtained only through a proper compaction process. Traditionally, compacted layers are tested using spot methods, which rely on the assumption that the properties measured from a small sample of material represent an entire section. This limitation has led to quality management techniques that continuously monitor the acceleration records from a sensor installed on the roller's drum. These techniques …