Civil Engineering Commons^™

Optimization And Longevity Of Functionalized Multi-Walled Carbon Nanotube-Enabled Membranes For Water Treatment, Madeleine Michael Isabella White

Master's Theses

Water scarcity is a growing concern at the global scale. Large scale water reuse is growing both in necessity and popularity. Before water reuse can be performed efficiently on a large scale or be used for potable supply, even indirectly, contaminants of emerging concern (CECs) will need to be treated at the full scale. Advanced oxidation processes (AOPs) are a form of advanced water treatment capable of treating a wide range of CECs. This study contributes to the growing field of AOPs and more specifically AOPs using ozone combined with functionalized multi-walled carbon nanotubes (MWCNTs). Ozonation of MWCNTs has been …

Experimental Investigation For Moment Redistribution In Continuous Rc Beams Top Strengthened With Cfrp And Steel Plates, Amr Ibrahim, Shady Salem, Ayman Khalil, Mahmoud El-Kateb

Civil Engineering

An experimental study was conducted on eight T-section continuous reinforced concrete beams top strengthened with CFRP and steel plates. The beams had a constant cross section and flexural steel reinforcement which was designed to prevent brittle failure due to crushing of concrete before steel yielding. The plates were installed on both sides of the slab above the beam web as near surface mounted or externally bonded to investigate the effect of different plating techniques on the moment redistribution in reinforced concrete beams. The number of plates in each specimen was changed. Steel stirrups were used and designed so that no …

Effective Communication Message Strategy For Enhancing Traffic Safety In Fresno County: The Role Of Time Horizon, Regulatory Focus, And Perceived Personal Control, Samer Sarofim

Mineta Transportation Institute

This research empirically investigated the differential effect of message framing on message recipients’ attitudes and intended behaviors related to pedestrian, cyclist, and motorist traffic safety practices. The framework empirically investigated time horizon (expansive vs. limited) and regulatory focus (prevention vs. promotion) message framing.

The time horizon in the message can make someone either think of the future (expansive) or the present (limited). For example, an expansive time horizon message communicates that life is long and directs the focus on the future. On the contrary, a limited time horizon message communicates that life is short and directs the focus on the …

Stress-State And Injection-Rate Dependent Damage Processes During The Hydraulic Fracturing Of Granite, Gayani Sasendrika Gunarathna

Dissertations

Hydraulic fracturing is a well-stimulation technique that is employed in field applications, such as enhanced geothermal systems (EGS) and shale oil/gas extraction. This research experimentally investigates the effect of the state of stress and injection rate on the hydraulic fracturing processes. In addition, a displacement discontinuity method (DDM) code, FROCK, is used to model the crack initiation and propagation in a granite specimen under hydraulic fracturing conditions. In order to conduct the experimental work, a test setup capable of applying a triaxial state of stress and water pressure inside pre-fabricated flaws cut in prismatic granite specimens is developed. Additionally, the …

Numerical And Analytical Methods To Predict Behavior Of Reinforced Ductile Concrete Composites, Mandeep Pokhrel

Dissertations

Structural components constructed with ductile concrete composites, such as high-performance fiber-reinforced cementitious composites (HPFRCC), are known to perform exceptionally well under extreme mechanical and environmental loading conditions compared to traditional concrete. HPFRCC flexural components exhibit enhanced performance in terms of displacement ductility, energy dissipation capacity, and damage tolerance capacity. However, recent research suggests that the flexural behavior of reinforced HPFRCCs in terms of crack progression, reinforcement plasticity, and failure mechanism is significantly different than conventional reinforced concrete. Specifically, the failure mode of flexural members is found to be predominantly through the fracture of longitudinal reinforcement rather than compression crushing of …

The Impact Of Conversion On The Durability Of Calcium Aluminate Cement Concrete Systems, Marwa Mohsen Korayem

Dissertations

The deterioration of infrastructure in North America has resulted in a significant need for concrete repair materials that can be used to maintain service life of these structures. Hydraulic cement based rapid repair materials can be used to repair pavement and bridge deterioration with minimal impact on economic activities such as freight handling or public transportation. While there are many options for use in repair situations, calcium aluminate cements have become more popular recently, particularly in situations where repairs must be completed rapidly.

Calcium aluminate cement (CAC) is a cement characterized by its rapid strength gain, even at low temperatures …

Recovery Of Valuable Metals From Spent Lithium-Ion Batteries Using Organic Acids: Assessment Of Technoeconomic Feasibility, Leqi Lin

Theses

Lithium ion batteries (LIBs) are used in diverse electronic products with anticipated over 500 thousand tonnes of the waste LIBs globally in 2020. To protect the environment and also recover valuable materials such as lithium (Li) and cobalt (Co), our research employed a hydrometallurgy method and demonstrated that exposure of spent LIBs to Organic Aqua Regia (OAR) could leach Li and Co without the pre-separation of cathode from Al foil using organic solvents such as Dimethylformamide (DMF) and N-Methyl-2-pyrrolidone (NMP). The leaching efficiency of 99% and 94% for Li and Co were obtained with a leaching rate of 0.021, 0.167 …

Study Of The Effect Of Heating - Cooling Cycles On The Clay - Concrete Pile Interface Characteristics, Abedalqader Ahmad Idries

LSU Master's Theses

This study aimed at investigating the effect of heating-cooling cycles on the interface strength parameters of clay soil-concrete for potential applications to improve the side capacity of piles driven in clayey soil by the heating process, and also to assess the behavior of geothermal piles regarding interface shear strength parameters. A modified large-size direct shear test device with the dimensions 12” x 12” x 8”, was used in this study. A concrete block (12” x 12” x 4”) of similar texture and smoothness to the concrete piles was used to simulate the pile interface. The tested clays are low plasticity …

Identification Of Top-Down, Bottom-Up, And Cement-Treated Reflective Cracks Using Convolutional Neural Network And Artificial Neural Network, Nirmal Dhakal

LSU Doctoral Dissertations

The objective of this study was to formulate a Convolutional Neural Networks (CNN) model and to develop a decision-making tool using Artificial Neural Networks (ANN) to identify top-down, bottom-up, and cement treated (CT) reflective cracking in in-service flexible pavements. The CNN’s architecture consisted of five convolutional layers with three max-pooling layers and three fully connected layers. Input variables for the ANN model were pavement age, asphalt concrete (AC) thickness, annual average daily traffic (AADT), type of base, crack orientation, and crack location. The ANN network architecture consisted of an input layer of six neurons, a hidden layer of ten neurons, …

Enhancing Facility Management For Existing Facilities With Building Information Modeling, Ryan Loeh

Theses and Dissertations

Building information modeling (BIM) refers to the process of creating a comprehensive three-dimensional (3D) model that allows for a seamless transition from design and construction to operation & maintenance during a building's lifecycle. While a majority of past research for building information modelling was focused on design and construction, research has shifted to operation, maintenance and renovation. This study investigates the feasibility of integrating BIM (Autodesk Revit) and facility management (BUILDER SMS). BUILDER SMS is currently used at the sponsor's facilities to encourage proactive maintenance and provide updated condition assessments. While both datasets have their own benefits, this study investigates …

Understanding Air Pollutants And Meteorology Interactions Using Chemical Transport Models, Pengfei Wang

LSU Doctoral Dissertations

Air pollution is a worldwide threat to human health and ecosystems, especially in developing countries. After being emitted to the atmosphere, air pollutant concentrations are determined by chemical and physical processes including transport, transformation, and deposition, which are largely affected by meteorological variations. In turn, pollutants such as fine particulate matter (PM_2.5) affect meteorology by impacting solar radiation and cloud condensation processes. Thus, it is important and necessary to understand the interactions between air pollutants and meteorology for better designing effective air pollution control strategies and forecasting weather. In this study, two chemical transport models (CTMs) are applied …

Modeling Of Distributary Channels Formed By A Large Sediment Diversion In Broken Marshland, Dylan Blaskey

LSU New Orleans Theses and Dissertations

A 2-D DELFT3D model was developed to address the morphological response of Barataria Bay, the sediment deposition rate in the receiving basin, and the impact on the existing distributary channels within the broken marsh system due to the proposed Mid-Barataria Sediment Diversion. The model had a mesh size sufficient to accurately represent the development of the distributary channels, localized flooding, erosion, and salinity in the basin. The model predicts that the receiving basin will experience extensive erosion during the first year the diversion is open creating three major distributary pathways which flood much of the basin in freshwater. Most locations …

Response Of Large Diameter Offshore Wind Turbine Monopile Foundations To Extreme Event Loading Expected At U.S. Atlantic Coast Wind Energy Areas, Laura Hulliger

LSU New Orleans Theses and Dissertations

Extra-tropical (ETC) and tropical cyclones (TC) pose potential risks to offshore wind farms along the U.S. Atlantic coast, where the offshore wind energy industry is gaining momentum. This research aims to evaluate the stability of large diameter offshore wind turbine monopile foundations under these extreme conditions using the governing industry practice in IEC 61400-3-1. To quantify the risk at U.S. Atlantic coast wind energy areas (WEAs), the ETC and TC impact frequency and intensity are identified using the NHC Historical Hurricane Tracks Archive. Numerical simulations in Plaxis 3D are performed on foundations ranging from 8 to 12 meters in diameter …

Evaporation From Undulating Soil Surfaces Under Turbulent Airflow Through Numerical And Experimental Approaches, Bo Gao, John Farnsworth, Kathleen M. Smits

Civil Engineering Faculty Publications - Archive

Evaporation from undulating soil surfaces is rarely studied due to limited modeling theory and inadequate experimental data linking dynamic soil and atmospheric interactions. The goal of this paper is to provide exploratory insights into evaporation behavior from undulating soil surfaces under turbulent conditions through numerical and experimental approaches. A previously developed and verified coupled free flow and porous media flow model was extended by incorporating turbulent airflow through Reynolds-averaged Navier–Stokes equations. The model explicitly describes the relevant physical processes and the key properties in the free flow, porous media, and at the interface, allowing for the analysis of coupled exchange …

A System-Of-Systems Model To Simulate The Complex Emergent Behavior Of Vehicle Traffic On An Urban Transportation Infrastructure Network, Rayan Assaad, Cihan H. Dagli, Islam H. El-Adaway

Engineering Management and Systems Engineering Faculty Research & Creative Works

Transportation agencies face escalating challenges in forecasting the traffic demand. Traditional prediction methods focused on individual transportation sectors and failed to study the inter-dependencies between the different transportation systems. Hence, there is a need for more advanced and holistic modeling techniques. To this end, this paper models and analyses an urban transportation system-of-systems incorporating seven various systems: population and GDP, CO₂ emission, gasoline price and total vehicle trips, traffic demand, public and private transportation, transportation investment, and traffic congestion. Accordingly, this research simulates transportation networks as a collection of task-oriented systems that combine their resources to form a complex …

An Agent-Based Model To Study Competitive Construction Bidding And The Winner's Curse, Amr Elsayegh, Cihan H. Dagli, Islam H. El-Adaway

Engineering Management and Systems Engineering Faculty Research & Creative Works

Reverse auction theory is the basis for competitive construction bidding process. The lowest bid method is utilized for selecting contractors in public projects. The winning contractor having the lowest bid value could be cursed when the submitted bid value results in negative profits. This is caused by many factors such as the contractor's estimation accuracy and markup. This is addressed in this paper by providing a model simulating the construction competitive bidding and the occurrence of the winner's curse. To this end, the authors show the extent to which the winner's curse affects the status of contracting companies. The objectives …

A System Dynamics Approach For Study Of Population Growth And The Residential Housing Market In The Us, Gasser Galal Ali, Islam H. El-Adaway, Cihan H. Dagli

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The US Consensus bureau estimated the total construction spending at 1,320,305 Million Dollars, in February 2020, with an increase of 1.1% since last February. The construction market is large, and risky. Prediction of the market behavior, for several years ahead, is needed in order to take strategic investment decision for long and expensive projects. The goal of this research is to study the relationship between population growth and the housing market. To that end, a system dynamics model is developed. System dynamics is a top-down approach that starts with the high-level behavior of a complex system to simulate the behavior …

A System Dynamics Model For Construction Safety Behavior, Mohamad Abdul Nabi, Islam H. El-Adaway, Cihan H. Dagli

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Construction Industry has always been reputed by its high incident rates and poor safety performance. Construction accidents are, in most cases, resulted from the unsafe behaviors of construction workers on site. The study of workers' behavior is crucial in order to understand the causation of unsafe behaviors. Therefore, the objective of this paper is to simulate construction safety behavior in order to predict the number of safety incidents and better understand their causation factors. The simulation model illustrates how construction system influences construction labors on site in terms of unsafe behavior. The standard leading indicators of safety performance are first …

Beaver Creek Restorative Design Using Engineering In Nature, Lindsay M. Levatino

Senior Honors Projects, 2020-current

Stream restoration work can be instrumental for the wellbeing of an ecosystem. Located in the Shenandoah Valley in Virginia is Beaver Creek, a well-known spot for fly-fishing due to its pristine water conditions and open surroundings. In order to maintain these conditions, a 100-foot stretch of Beaver Creek needed to be restored to prevent further erosion, stabilize the banks, and enhance the natural habitats. The project involved excavating a sediment island, filling in an eroded bank, building a cross vane, and adding stakes. Local stakeholders came together to complete this project contributing their expertise, equipment, and time. The construction was …

2-D Non-Linear Finite Element Analysis Of Folsom Dam: Seismically Induced Separation And Pore Pressure Along The Soil-Concrete Interface, Grace Amoussou

Master of Science in Civil Engineering Theses

The seismic soil-concrete interface stability of composite dams has been an area of interest to many researchers. However, the true interface behavior during a seismic event has not been well understood. During a ground shaking, bonding and de-bonding action along the interface may cause significant separation of soil and concrete surfaces, and such a separation may take place at any depth along the interface creating a stability concern for the overall dam. Moreover, the repetitive nature of bonding/debonding behavior may induce excess pore pressure along the interface, which in turn, may trigger a liquefaction failure or a hydraulic fracture in …

On The Seismic Performance Of Skewed Special Moment Frame Reduced Beam Section Connections, Damaso Daniel Dominguez

Graduate Theses and Dissertations

Special Moment Frames (SMFs) are frequently used in high seismic areas for architecturally constrained designs, as they provide lateral system stiffness without the use of braces which often obstruct views and architectural features. Reduced beam section (RBS) connections are popular SMF connection details developed following the Northridge earthquake to limit brittle fractures within connection welds. Current American Institute of Steel Construction (ASIC) provisions (i.e. AISC 341-16) provide prequalified SMF RBS connection details (including welding requirements); however, all prequalified details only consider orthogonal connections between the beam and column. This dissertation investigates the effect of adding skew within SMF RBS connections …

Development Of Vs Profiles And Site Periods In The Mexico City Basin, Landon Joel Woodfield

Graduate Theses and Dissertations

This study presents dynamic site characterization measurements at 25 sites within the Mexico City Basin. The primary focus of the testing was along the western edge of the Mexico City Basin. At each site, active source Multi-channel Analysis of Surface Waves (MASW) arrays and passive source Microtremor Array Measurements (MAM) L-arrays and circular arrays were used to acquire dispersion data. Horizontal to Vertical Spectral Ratio (HVSR) data was collected to determine site periods at each location. These experimental dispersion data and site periods were fit using a joint inversion of Rayleigh and Love wave dispersion data and HVSR site period …

Numerically Modeling Steel Continuous Bridges For Early Age Concrete Deck Cracking, Abdul Aziz Nabil Salah

Graduate Theses and Dissertations

Early age bridge deck cracking is a common problem throughout the United States. Early age cracking develops shortly after the deck is poured. It reduces the serviceability and lifespan of bridges. Early age cracking can be typically attributed to either of two factors, 1) construction practices, and 2) shrinkage. The Arkansas Department of Transportation (ARDOT) has experienced early age bridge deck cracking. ARDOT currently specifies a sequence deck pour on most of their bridges; however, contractors prefer continuous deck pours because of ease and construction time. During the period of this TRC1903 research project, ARDOT has only approved a few …

Numerical Simulations Of Spread Foundations Supported On Stone Columns Using The Discrete Element Method, Anibal Enrique Santos Marin

Graduate Theses and Dissertations

The implementation of stone columns as a ground improvement technique has become more popular in geotechnical construction practice as a result of their ability to improve strength, stiffness and permeability characteristics of weak clayey soil deposits. There are several analytical and empirical approaches to estimate the bearing capacity of stone column foundation systems; however, there is notable variation in the performance of these existing methods when compared with full-scale experimental results. For very weak cohesive soils (i.e., undrained shear strength less than 15 kPa), the use of conventional stone columns becomes restricted because of the insufficient confinement that these types …

Best Practices For Asphalt Emulsion Particle Size Analyses Using A Coulter Counter, Logan P. Kiihnl

Graduate Theses and Dissertations

As asphalt pavements develop distresses, pavement preservation, maintenance, and rehabilitation treatments are used to mitigate distresses and extend the life of the pavement. Many of these treatments utilize asphalt emulsion. Previous research has linked particle size to material properties including viscosity and storage stability. General statements have also been made about particle size influencing emulsion performance while other researchers have identified a trend between particle size and prime coat penetration. Even though literature discusses the importance of particle size, there is little guidance on the best practices of asphalt emulsion particle size analyses, specifically with a Coulter counter.

Data collected …

Development Of Multi-Axial Fatigue Retrofits For Lock Gate Components, Logan Verkamp

Graduate Theses and Dissertations

Lock gates are essential infrastructure components to the United State (US) supply chain. They create large cost savings and environmental benefits when compared with traditional methods of transport (freight and rail). Because of the large quantity of goods and dependence on these shipping chains, the US economy can be drastically affected by an unexpected gate closure. Unfortunately, many lock gates within the US have reached or exceeded their designed life. Due to the intensity of cyclic loads and the environment, fatigue cracks have become a prominent issue. Developed cracks near the pintle region (a joint which the gate rotates and …

Experimental And 3d Finite Element Analyses Of Invert-Removed Circular Corrugated Metal Pipe Culverts Renewed With Polymer Spray-Applied Pipe Lining, Samrat Raut

Civil Engineering Theses - Archive

Corrugated metal pipes (CMPs) are one of the widely used culvert structures in the American highway system. Compared to other types of culverts, CMPs have shorter design life, and many CMP culverts have reached or exceeded their design life. Therefore, renewal or replacement of those CMPs is needed to ensure the safety and service of the highways. Since replacements of these culverts are costly, renewalis less costly and has been on the focus in this decade. Different rehabilitation methods have been proposed by different DOTs and the researchers from open-cut methods to trenchless technology. Since open-cut methods disturb the operation …

Flexural Load Capacity Of Heat-Treated Concrete Mixed With Recycled Glass Aggregate And Glass Pozzolan, Enrique Gonzalez Tapia

Civil Engineering Theses - Archive

This research focuses on determining the effects of adding glass aggregate and glass pozzolan to concrete that has been exposed to high temperatures. Previous work, based on finding the recommended proportions of recycled components for optimum results, was done to analyze the effects of adding recycled glass components to concrete. Based on those studies, a replacement ratio of 30% glass aggregates and 20% glass pozzolan was used in this project. The compressive strength of concrete has been extensively studied and has been shown to increase in strength when glass components are used in their correct proportions. Less research has been …

Experimental Study Of Flexural Behavior Of Preflex Sfrc-Encased Steel Joist Composite Beams, Niraj Narendra Bankatlal Bora

Civil Engineering Theses - Archive

This study investigates the behavior of encased steel composite beams in straight and preflex beams, constructed and tested at Civil Engineering Laboratory Building (CELB). Upwards camber is provided in the steel sections in steel angles and HSS tube in the composite beam encased in Steel fibers reinforced concrete (SFRC). Experimental procedure has been performed to study the flexural behavior of composite steel joists encased in SFRC. Compressive strength, tensile strength and modulus of rupture are computed. The physical properties of steel fiber reinforced concrete are calculated through testing at the UTA Civil Engineering Laboratory Building. Eighteen cylindrical (4”x8”) specimens, eighteen …

Numerical Investigation Of Concrete Breakout Strength Of Anchors In Shear Within Fiber Reinforced Concrete, Yash Hitendrakumar Patel

Civil Engineering Theses - Archive

This study investigates the numerical analysis of concrete breakout strength of cast in place anchors in shear within synthetic fiber reinforced concrete (SYN-FRC). A three dimensional, full-scale model was developed using the ABAQUS 6.14 software. The 3D solid elements with consideration of material nonlinearities were chosen to stimulate the SYN-FRC beam anchorage. The numerical analysis was conducted with a fixed loading rate of 300lb per step to obtain the behavior of fiber-reinforced concrete breakout with design-mix compressive strength of 4,000 psi and fiber volume fraction of 0%, 0.5%, 1.0%, and 1.5%. An inverse analysis was used to calibrate the material …