Civil Engineering Commons^™

Mechanism Of Organic Odor Generation From Thermophilically Digested Biosolids, Jong-Min Kim

Civil Engineering Faculty Publications

In anticipation to generate more stabilized biosolids, thermophilic anaerobic digestion systems are widely used to destroy greater sludge organics thus making them less odorous. In this study, single-stage thermophilic (at 55 ℃) and mesophilic (at 37 ℃) anaerobic digesters were studied to compare organic removal efficiencies and sulfur-based odor generation from their biosolids. Although the thermophilic system removed about 9% more volatile solids than the mesophilic system, about 55 times more odorous organic sulfur compounds were measured from dewatered thermophilic biosolids. Different methanogenic species were found to be responsible for malodorous dewatered biosolids from the thermophilic anaerobic digester.

Historical Changes In Planform Geometry Of The Amite And Comite Rivers And Implications On Flood Routing, Kathleen E. Harris

LSU Master's Theses

The Amite River Basin is a 2,220 square-mile basin spanning from southwest Mississippi through southeast Louisiana, encompassing Baton Rouge and its suburbs. In response to historic flooding in August 2016 and other major flood events in the past several decades, the basin has been the subject of a number of studies to quantify the impacts of changes in land-use and reduction in river length and sinuosity. However, there have yet to be relationships defined between the changes in the historical river planform and the resulting flow, stages, and subsequent flood depths. River lengths and sinuosity were measured from the 1930s …

Efficacy Of Enzymatically Induced Calcium Carbonate Precipitation In The Retention Of Heavy Metal Ions, Arif Ali Baig Moghal, Mohammed Abdul Lateef, Syed Abu Sayeed Mohammed, Kehinde Lemboye, Bhaskar C. S. Chittoori, Abdullah Almajed

Civil Engineering Faculty Publications and Presentations

This study evaluated the efficacy of enzyme induced calcite precipitation (EICP) in restricting the mobility of heavy metals in soils. EICP is an environmentally friendly method that has wide ranging applications in the sustainable development of civil infrastructure. The study examined the desorption of three heavy metals from treated and untreated soils using ethylene diamine tetra-acetic acid (EDTA) and citric acid (C₆H₈O₇) extractants under harsh conditions. Two natural soils spiked with cadmium (Cd), nickel (Ni), and lead (Pb) were studied in this research. The soils were treated with three types of enzyme solutions (ESs) …

A Probabilistic Casualty Model To Include Injury Severity Levels In Seismic Risk Assessment, Weichiang Pang, S. Majdalaweyh, A. Safiey, K. Rokneddin, S. Prabhu, M. Javanbarg, E. Ziaei

Publications

Despite the increasing adoption of Performance-Based Earthquake Engineering (PBEE) in seismic risk assessment and design of buildings, earthquakes resulted in around 1.8 million injuries (three times the number of fatalities) over the past two decades. Several existing PBEE-based methodologies use rudimentary models that may not accurately estimate earthquake-induced casualties. Even when models are suitable for predicting the total number of fatalities and critical injuries, they may fail to adequately differentiate between different levels of injury severity. This paper draws attention to the importance of extending the seismic casualty assessment method by broadening the perspective on injury severity. To this cause, …

Ground Motion Duration Effects On The Seismic Risk Assessment Of Wood Light-Frame Buildings, Weichiang Pang, A. Safiey, S. Majdalaweyh, E. Ziaei, K. Rokneddin, M. Javanbarg

Publications

Wood construction comprises a large portion of building stocks of several countries across the globe with high preparedness for earthquakes including Japan, Canada, and the United States. Built environments of these countries are prone to long-duration ground shakings due largely to the proximity of subduction faulting systems. However, the current seismic design requirements do not adequately emphasize this key feature of ground motions. This study evaluates the impact of long-duration ground motions on seismic risk characteristics of code-conforming wood lightframe buildings. To this end, a study matrix of wood light-frame buildings is developed incorporating with two different heights (i.e., 1-story …

Implementation Of An Open-Source Digital Image Correlation Software For Structural Testing, Nicole V. Buck

Master's Theses

This thesis investigates the appropriateness of a simplified, open-source digital image correlation (DIC) software for use in quasi-static, structural testing utilizing two-dimensional (2D) DIC measurements. DIC is a non-contact optical measurement technique that uses computer vision to track unique attributes on the surface of an object. For structural testing, traditional instrumentation such as displacement sensors and strain gages are impractical for full field measurements due their limited ability to capture large amounts of data. However, over the past decade, DIC has proven a successful method for full-field kinematics measurements, making it an appealing tool for collecting high densities of accurate …

The Impact Of Metal Pipe Materials, Corrosion Products, And Corrosion Inhibitors On Antibiotic Resistance In Drinking Water Distribution Systems, Lee Kimbell, Yin Wang, Patrick J. Mcnamara

Civil and Environmental Engineering Faculty Research and Publications

Drinking water distribution systems (DWDS) are unique engineering environments that are important routes for the acquisition and dissemination of antibiotic resistance. Antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) in drinking water pose risks to human and environmental health. Metals are known stressors that can select for antibiotic resistance. The objective of this review was to assess the state of knowledge regarding the impact of metal pipe materials, corrosion products, and corrosion inhibitors on the prevalence of antibiotic resistance in DWDS. ARGs and mobile genetic elements (MGEs) have been detected in full-scale DWDS in concentrations ranging from ~ 10^{1 …}

Hybrid Passive Control System For Seismic Response Mitigation Of Steel Frame Structures, Mohammad Hossein Mehrabi

Student Works (2020-2029)

Large vibration forces such as from seismic excitations can cause structural damage and structural collapse in the case of intense earthquakes. A large number of novel methods and of these techniques has weaknesses and strengths. Several control devices demonstrate a two-step mechanism in which the structure's stiffness is initially raised, and then the of the first vibration period down to a region where the structural response is significantly increased. The main aim of this thesis is to propose a hybrid passive control system comprises of two phases for the seismic retrofit of moment-resisting steel frames. The first phase is a …

Bs News September/October

Building Services Engineering

No abstract provided.

Membrane-Based Removal Of Ammonia From A Waste Stream And Its Recovery, Philip A. Aligwe

Dissertations

At neutral pH levels, ammonia in aqueous streams exists in two forms: ammonium ion (NH₄⁺) and dissolved ammonia gas molecules (NH₃). Membrane separation serves as a viable option for treatment of ammonia containing effluents. This can be achieved via by stripping NH₃ from an ammonia feed solution at feed solution pH > 11 via hollow fiber supported gas membrane (SGM) or removing NH₄⁺ from an ammonia feed solution at feed solution pH < 7 via liquid or polymeric membranes.

The first study reported here examines the influence of feed volumetric flow rates on outlet NH₃ concentrations in parallel flow …

Numerical Study Of Paraffin Wax Melting In A Cavity With A Gradient Of Hot Wall Inclination, Agus Dwi Korawan

Makara Journal of Technology

The melting of a phase change material (PCM) in a cavity with a gradient of hot wall inclination was simulated numerically using five models, namely, Model-A, Model-B, Model-C, Model-D, and Model-E with gradients of −2, −4, ∞, 4, and 2, respectively. The PCM was paraffin wax, which was melted using an enthalpy porosity technique with a pressure-based method. Model-A was found to be the best model. For the completion of the melting process, the models were assigned with the liquid fraction of 1. Model-A required the shortest time, followed by Model-B, Model-C, Model-E, and Model-D, respectively. Compared with Model-C, Model-A …

Modeling Strategies For Structures Using Ductile Concrete Materials In Seismic Applications, Hasan Tariq

Dissertations

High-Performance Fiber-Reinforced Cementitious Composites (HPFRCCs) have made striking advances over the last two decades as an alternative material to replace ordinary concrete in regions of high seismic intensities. In contrast to ordinary concrete which has a brittle tensile response, HPFRCCs exhibit tensile strain hardening and multiple crack propagation. The application of HPFRCC in various structural components demonstrate effectiveness by improving damage resistance, deformation capacity, and energy absorption capacity. Despite these benefits, the failure mode of reinforced HPFRCC components is dominated by reinforcement fracture unlike traditional reinforced concrete components which fail in flexure by crushing. The unique behavior of HPFRCC members …

St. Mary And St. Anne Cathedral, Cork: An Optimum Heating Solution For Heritage Buildings?, Christopher Shiell, Roger P. West

Civil Engineering Research in Ireland 2020

Cathedrals and most churches are characterised by having large internal, undivided spaces and permeable building envelopes. They are often used little, intermittently, but predictably and, in spite of the fact that they are unique in still being largely used for the purpose for which they were built many centuries ago, they are now often used for additional purposes, for which they were never designed. These uses include concerts, graduation ceremonies, filming and a host of other uses all of which require a level of thermal comfort not envisaged by the original builders. Research was undertaken by the authors into the …

Challenges And Opportunities To Deep Retrofitting Of Traditional Fabric Buildings To Achieve Nearly Zero Energy Building (Nzeb), Maria Lopez Zambrano, Paul Kenny, Jamie Goggins

Civil Engineering Research in Ireland 2020

Many of our traditional buildings are disappearing or in danger of being under utilised because they are not comfortable for modern day living and do not meet our present day needs. If a building does not have a use, inevitably it deteriorates and eventually becomes a ruin or gets demolished. It is important to retrofit these buildings, which are part of our identity and can be powerful tourist attractions even though most of them are not listed. Some owners want to apply for retrofitting schemes and grants, but they are rejected because there are no standard solutions to achieve low …

Teaching Of Structural Analysis Into The Future, Dermot O'Dwyer

Civil Engineering Research in Ireland 2020

The engineering curriculum has always been full. In the past civil and structural engineers studied a wide variety of technical subjects within the broad field of engineering science and spent many hours working on design projects. Modern engineering curricula try to cover these areas while also dedicating more time to structured group-work, report writing and communication skills. Although students spend longer in college the number and range of technical fields that students must master is considerably larger than in the past. As a result the time available to any one topic area has reduced. At the same time the work …

Can Deap Help Us To Predict The Energy Demand And Indoor Temperature Of Homes Before And After Renovation? A Case Study From Dublin, Paul Moran, Jamie Goggins

Civil Engineering Research in Ireland 2020

Improving the energy efficiency of buildings via retrofitting is seen as one of the key mitigation measures to reducing the energy demand and carbon emissions of the built environment in Ireland. However, while energy efficiency retrofits for buildings are effective in theory, the energy savings estimated by statistical or engineering models can often be inaccurate. The Domestic Energy Assessment Procedure (DEAP) is the standard assessment procedure used for assessing the energy performance standard of residential buildings in Ireland. This paper examines the gas energy demand for space and water heating and the internal temperature profiles in contrast to DEAP estimates …

Operational And Embodied Energy Analysis Of 8 Single-Occupant Dwellings Retrofit To Nzeb Standard, Richard O'Hegarty, Shane Colclough, Oliver Kinnane, Donal Lennon, Etienne Rieux

Civil Engineering Research in Ireland 2020

In line with the Energy Performance of Buildings Directive, Irish dwellings are being retrofit to near Zero Energy Building (nZEB) standards - with a number of the deep energy retrofits classified as A-rated. As a result of the low operational energy, the embodied energy share of an nZEB's life cycle energy is significantly increased. Therefore, to obtain a holistic picture of the change in energy profile of buildings, the embodied energy of the material added to achieve that low performance should also be taken into account. This paper presents results from a case study of 8 single-occupant terrace bungalows retrofit …

Art In Engineering: Evoking A Creative Response From Engineering Students And More, Jamie Goggins, Marta Fuente, Eamonn Madden

Civil Engineering Research in Ireland 2020

The concept of creativity being only associated with writers, painters, and artistic professions is outdated. The future engineer must embrace maths, art and creativity to unlock innovative solutions. Traditional engineering courses with an emphasis predominately on maths and science can produce graduates who are constrained in developing design solutions without creativity to unlock innovative solutions. This paper describes a short course introduced in the School of Engineering at NUIGalway in 2018 to expose students to creative thinking research and principles and engage in various forms of creative expression (photography, painting and essay writing) to articulate their response to a set …

The Broader Development Of The Student Engineer Through Industry Based Experiential Learning, Donogh Coleman, Ted Mckenna, Mary Moloney

Civil Engineering Research in Ireland 2020

The global drive for industry-aware and industry-ready engineering graduates, has led to the development and integration of experiential learning through work placements. Industry is looking to recruit graduates with not just the requisite technical engineering skills, but also graduates with inter alia high levels of teamwork and communications skills. This has been recognised by CIT with the integration of work placement in most of its undergraduate programmes. This paper provides an overview of the student placement process in the Department of Civil, Structural and Environmental Engineering at CIT, includes the work placement alternative which was implemented due to the COVID-19 …

Long-Run Traffic Simulations For Multi-Lane Road Bridges, Róisín Donnelly, Lorcan Connolly, Ilaria Bernardini

Civil Engineering Research in Ireland 2020

The maintenance and repair of ageing bridges is a concern for road infrastructure managers. This issue is amplified by the increasing weights and frequency of travel of freight vehicles in recent times. In order to accurately assess the risk of damage for road bridges, it is essential to have knowledge of both historical and current bridge loading. When available, site-specific Weigh-in-Motion (WIM) data can be effective in creating representative load models for a structure. However, for cases where WIM data is not available and in cases where future damage must be predicted, it is necessary to simulate appropriate data using …

Repair & Rehabilitation Of Daly's (Shakey) Bridge, Cork City, Michael Minehane, John Gamble

Civil Engineering Research in Ireland 2020

This paper describes the rehabilitation of (Shakey) Bridge, an existing single-span suspension bridge crossing the northern channel of the River Lee in Cork City. The bridge was opened in 1927 to replace an earlier ferry crossing at the same location. Daly’s bridge is included on the Record of Protected Structures and the National Inventory of Architectural Heritage. It remains the only suspension bridge in Cork City and is the only surviving bridge of its kind in Ireland. It is considered to be a significant contributor to the architectural heritage of the city. This case study describes the project development including …

Reinforcement Of Timber Elements In Compression Perpendicular To The Grain Using Compressed Wood Dowels, Michael Conway, Conan O'Ceallaigh, Sameer Mehra, Annette M. Harte

Civil Engineering Research in Ireland 2020

In the past decade, there has been an increased focus on the environmental impacts of construction and a movement towards more sustainable construction products. Timber is one such sustainable product that can achieve these environmental targets but, while timber has a high strength-to-weight ratio parallel to the grain, it demonstrates poor strength perpendicular to the grain. As a result, stress perpendicular to the grain is an important factor in the design of timber structures, especially in areas of concentrated loading, such as supports. This paper describes a study, which examines the use of compressed wood dowels as a sustainable alternative …

Development And Testing Of A Deployable Double Layer Tensegrity Grid, Michael Quilligan, Valentin Gomez-Jauregui, Cristina Manchado, Cesar Otero

Civil Engineering Research in Ireland 2020

Tensegrity is a structural principle based on the use of isolated or contiguous pin jointed components in compression inside a net of continuous tension. Although the concept has been studied for many decades, relatively few examples of tensegrity structures have been used for civil engineering purposes.

A Review Of The Engineering Constraints And Project Management Challenges Involved In Utilising Scot’S Church As A Heritage Asset Through Responsible Adaptive Reuse And Conservation Strategies, Óisín Smith

Civil Engineering Research in Ireland 2020

In the field of structural building, there has been a rising popularity in adaptive reuse of older structures, which stems from a variety of stimuli. Apart from preserving built heritage, providing old buildings with new functions promotes sustainability while preventing and containing urban sprawl. Target 11.4 of the United Nation’s Sustainable Development Goals Agenda 2030 explicitly outlines that “more efforts to protect and safeguard the world’s cultural and natural heritage” are required. In order to valorise and regenerate obsolescent structures, intervention is often required. The dissertation provides a comprehensive overview of conservation engineering and demonstrates the importance of an engineer’s …

An Evaluation Of Design Issues Identified During Reviews Of Structural Designs Of Buildings From 2015 To 2020, Patrick Crean, Richard Osborne

Civil Engineering Research in Ireland 2020

A recent study on failures of structures in Ireland indicated that approximately 40% could be apportioned to designer error. A 2019 report into recent structural cracking of a high-rise building in Sydney Australia recommended that Independent third party checking by a Chartered Engineer should be a requirement on all major projects prior to construction. The report also stated that the critical elements of the design on these projects should be identified. It is obvious that a certain percentage of buildings constructed each year contain design flaws and only a small proportion of these ever result in a failure. However there …

Loading On Long Span Bridges In Heavily Trafficked Areas, Michael Quilligan, Eugene O'Brien

Civil Engineering Research in Ireland 2020

The critical traffic loading condition for long-span bridges is congestion when vehicles may be closely spaced together. Data on very high traffic flows is limited however, as induction loops which are typically used to collect traffic data, are ineffective when traffic flow breaks down. A number of long span bridges are located in areas of high traffic with periods of recurring congestion occurring daily. While the inter-vehicle gap distances are greater than those occurring during non-recurring full stop accident type events, the high frequency of the recurring congestion events can increase the probability of a critical load case occurring.

A Numerical Study Of The Effect Of Wind Barriers On Traffic And The Bridge Deck, Yuxiang Zhang, Philip Cardiff, Jennifer Keenahan

Civil Engineering Research in Ireland 2020

Wind actions can have a great impact on both bridges and traffic on bridges. However, structures designed to shelter the traffic from wind can influence the aerodynamic performance of the bridge deck, especially for long-span bridges. This study compares the effect of non-perforated walls and perforated walls used as wind barriers for traffic by conducting Computational Fluid Dynamics (CFD) simulations on three-dimensional geometries of a four-lane bridge deck. Steady-state simulations employ the Reynolds-Averaged Navier Stokes (RANS) method with the k-epsilon turbulence model and all simulations use parallel computing. An open-sourced software OpenFOAM is used.

Simulation Of Traffic Loading On Long Span Bridges, Hang Zhang, Michael Quilligan

Civil Engineering Research in Ireland 2020

Existing long span load models have typically been developed using a number of conservative assumptions, and as such are more applicable to the design of new bridges rather than the assessment of existing structures. Excessive conservatism in such assumptions can lead to expensive and unnecessary interventions in existing bridges. Furthermore, existing load models do not always allow for correlations in traffic weights and vehicle positions on the bridge.

Thermodynamic Cement Hydration Modelling Using Hydcem, Niall Holmes, Denis Kelliher, Mark Tyrer

Civil Engineering Research in Ireland 2020

Thermodynamics have been successfully applied to the field of cement hydration science to predict the formation of phase assemblages and pore solution chemistry. For any cement hydration model to be accepted, it must provide accurate forecasts of which solids may form and how the cement will dissolve over time. This is particularly important for the ongoing development of new sustainable cements and understanding their hydration behaviour in service.

Computational Modelling Of Next Generation Materials For Steel Catenary Risers In The Offshore Industry, Padraic O'Donoghue, Ronan Devaney, Seán B. Leen

Civil Engineering Research in Ireland 2020

Production risers are used to conduct oil or gas from the wellhead to an offshore production facility. Due to technical challenges with flexible marine pipe at large depths, there has been a move to steel catenary risers (SCRs) in recent years, due to the availability of high strength low alloy (HSLA) steels, such as bainitic X100. HSLA steels make SCRs a viable option for deep water due to the reduction in complexity and hence cost, compared to flexible pipes. However fatigue response is an important factor in their design, particularly in the vicinity of welded connections.