Civil Engineering Commons^™

Lighten Everyone's Load: Lidar Applications To Support Engineers, Planners, Scientists And More, Michael J. Olsen

PSU Transportation Seminars

Light detection and ranging (LIDAR) technology is reshaping the civil engineering profession and offers many unique advantages. National efforts such as the 3D Elevation Plan (3DEP) are helping increase the availability of LIDAR data. LIDAR is one of the crucial technologies that is transitioning the world of civil and construction engineering from 2D paper-based design to 3D digital design. The high spatial resolution and accuracy capabilities of LIDAR have led to increased efficiencies, improved analyses, and more informed decision making.

A further advantage of this dataset is that multiple people can use the same dataset for a variety …

Laboratory Comparison Of Full Depth Reclamation Stabilization Techniques Using Arkansas Field Materials, Chase Aaron Henrichs

Graduate Theses and Dissertations

Full depth reclamation (FDR) is a flexible pavement recycling technique that has not been explored in the state of Arkansas. FDR is unique in that it incorporates the entire flexible pavement section as well as a predetermined portion of the underlying base and sub-base materials with a stabilizer to create a new, stronger stabilized base course. Common stabilization techniques include the addition of asphalt emulsion, asphalt foam, or cement. Using the North Carolina emulsion FDR mix design, the Wirtgen foam FDR mix design, and the Portland Cement Association cement FDR mix design, field materials from four Arkansas highways in the …

Comparing Layer Types For The Use Of Mepdg For Fdr Design, Sadie Smith

Graduate Theses and Dissertations

While Full Depth Reclamation (FDR) has many potential cost and environmental benefits, especially over the lifetime of the pavement, it is necessary to be able to ensure that the recycled pavement will perform adequately. One way in which this can be accomplished is understanding how to best complete the structural design of FDR pavements. Because FDR is a combination of several different layers of material pulverized, mixed, stabilized and re-compacted, it does not fit neatly into any of these predetermined types of materials considered by the Mechanistic Empirical Design Guide (MEPDG). Current practice is to treat FDR as an unbound …

Three Dimensional Simulations Of Tornado Sheltering Effect Of Man-Made Structures, Piotr Gorecki

Graduate Theses and Dissertations

A three dimensional computational fluid dynamics (CFD) model was utilized to investigate tornado-like vortex interactions with wide man-made structures. The tornado-like wind profile was approximated using Rankine vortex model. By utilizing the CFD model, it was explained why tornadoes exhibit less damage on leeward side of large structures. During the preliminary stage of this study, a perpendicular vortex-prism interaction was analyzed. The prism height and the length were equal to the vortex core radius. The prism was also 12 times wider than the vortex core radius. During the vortex-prism interaction, the near-ground portion of the vortex was blocked by the …

Amount Of Uncertainty In The Methods Utilized To Design Drilled Shaft Foundations, Morgan Race

Graduate Theses and Dissertations

In 2001, load and resistance factor design (LRFD) for deep foundations was required by the American Association of State Highway and Transportation Officials (AASHTO). Following implementation of LRFD, localized calibration of resistance factors using data from the states of Colorado, Florida, Kansas, Louisiana/Mississippi, Missouri allowed these states to utilize higher resistance factors during design. However, characterizing the uncertainty in the design of DSF, regarding the geotechnical investigation methods and the utilized software programs, higher values of resistance factors may be calibrated to more efficiently design DSF with the same level of reliability.

Three test sites within the state of Arkansas, …

Development Of Best Management Practices For Turbidity Control During Rainfall Events At Highway Construction Sites Using Polyacrylamide, Joanne Johnson

Graduate Theses and Dissertations

In 2009, the United States Environmental Protection Agency (EPA) promulgated a national turbidity standard for runoff water leaving highway construction sites at 280 nephelometric turbidity units (NTU). Meeting this standard can be challenging as turbidities of runoff waters can exceed 15,000 NTU. The objective of this research was to assess polyacrylamide (PAM), a coagulant aid used in water treatment, to help meet the EPA turbidity regulation. Twelve commercially available PAM types were studied, selected on the basis of charge type (cationic, nonionic, anionic), charge density (0-100%), and molecular weight (0.1-28 Mg mol-1). Jar tests were conducted with runoff waters from …

Measurement Of Transfer And Development Lengths Of 0.7 In. Strands On Pretensioned Concrete Elements, Canh Ngoc Dang

Graduate Theses and Dissertations

The implementation of 0.7 in. (17.8 mm), Grade 270 (1860), low-relaxation prestressing strands in construction is slow regardless of its advantages over the use of 0.6 in. (15.2 mm) and 0.5 in. (12.7 mm) strands. The limited research data and unavailable design guidelines partially account for the slow utilization. This study measured transfer and development length, and evaluated applicable strand spacing of 0.7 in. (17.8 mm) prestressing strands for 24 pretensioned concrete beams. Each beam contained one prestressing strand or two prestressing strands placed at spacing of 2.0 in. (51 mm). The beams were fabricated with high strength, conventional concrete …

Achieving Enhanced Treatment Of Produced Fluids Using Ozone, Hydrogen Peroxide And Electrochemical Oxidation: Full Scale Evaluations, Jamar Willis Blackmon

Graduate Theses and Dissertations

The main focus of the present work was to expand the existing knowledge in using an advanced oxidation process for produced water treatment. Produced water is a phrase used in the oil and gas industry to describe water that is produced as a waste byproduct together with oil and gas. Historically produced water was pumped down disposal wells as a waste product. Due to increasing demand, limited supply and stricter regulation on fresh water sources, exploration and production companies have been compelled to recycle produced waters in many parts of their operations around the world.

Produced water quality varies dramatically …

Methodologies For Simplified Lifeline System Risk Assessments, Michael Germeraad

Master's Theses

Natural hazards are a growing risk across the globe. As regions have urbanized, single events impact greater proportions of the population, and the populations within those regions have become more dependent on infrastructure systems. Regional resilience has become closely tied to the performance of infrastructure. For a comprehensive risk assessment losses caused by lifeline outage must be considered alongside structural and nonstructural risks. Many well developed techniques quantify structural and nonstructural risk; however, there are insufficient procedures to determine the likelihood of lifeline outages. Including lifelines in seismic assessments will provide a comprehensive risk, improving a decision maker’s capacity to …

Evaluation Of The Equations Used To Calculate Hydraulic Conductivity Values From Two-Stage Borehole Tests, Johnathon Dale Blanchard

Civil Engineering Undergraduate Honors Theses

A compacted clay liner (CCL) test pad was constructed for the purpose of evaluating the testing procedures utilized for determining hydraulic conductivity of a CCL. These procedures include ASTM D6391 (2014) Method C and ASTM D6391 Method A. Method C was recently added to ASTM D6391(2014) and was evaluated based upon comparison of results obtained from previous research with results from the data presented herein. The test pad was instrumented with volumetric water content probes and water matric potential sensors to monitor the wetting front in the soil. The data obtained from this instrumentation should be used to develop a …

A Study Of The Influence Of Particle Gradation In Bonded Assemblies, Matthew P. Watters

Civil Engineering Undergraduate Honors Theses

The discrete element method (DEM) has been used extensively to study soil, rock, and masonry behavior because of its ability to model the materials as individual particles or bonded clumps of particles. DEM allows for examination of the macro- and micro-scale response and provides a means to study the fundamental material behavior, but it is still considered computationally expensive in relation to other methods. To lower computational costs, the smallest particle sizes are often considered negligible and are left out of the model. Additionally, rock or intact materials are often modeled as a bonded assembly of uniform spheres. To date, …

Artifical Neural Network Models For The Analysis Of Permeable Pavement Performance., Ata Radfar

Electronic Theses and Dissertations

This dissertation is a numerical modeling study based on the findings of the two installed Permeable Interlocking Concrete Pavements (PICPs) in Louisville, KY and twenty one laboratory models. A new model derived to more accurately predict the captured surface runoff volume by the PICPs using Artificial Neural Networks (ANNs). The proposed model relates rainfall parameters and site characteristics to the runoff volume captured by the permeable pavements. The database used for developing the prediction models is obtained from the collected data of the monitored permeable pavements. The performance of the ANN-based models are analyzed and the results demonstrate that the …

Data Driven Comprehensive Assessment Of The Performance Of Stormwater Best Management Practices., Shanshan Li

Electronic Theses and Dissertations

In order to evaluate the performance of the stormwater best management practices (BMPs) installed on the Belknap campus at the University of Louisville, a comprehensive assessment on the stormwater BMPs’ the flow volume reduction, peak flow attenuation, and overflow area abatement was made. We used a two-pronged analysis based on 1) predictive modeling using data mining approach; 2) model-based hydraulic simulation. The novelty of study is that it not only assessed the stormwater BMPs’ performances on flow volume reduction, but also assessed their performance on peak flow attenuation which is neglected in previous studies and assessment practices. Flow volume reduction …

Modeling Force Main Systems For Surge Analysis And Studying Dynamic Response Due To Water Hammer, Wissam Al-Taliby

Theses and Dissertations

The major impact of water hammer on force mains integrity include excessive pressure oscillation that is usually accompanied by pipe vibrations. Models for simulating force main water hammer response have been developed. All of these models were based on the method of characteristics (MOC) and most of them were not calibrated for the lack of efficient field data. Although predicting maximum pressure during the first wave cycle is sufficient in most applications, some applications require precise prediction of pressure damping. One-dimensional models usually over predict pressure oscillation beyond the first cycle since they are based on steady friction expressions. It …

Sensitivity Analysis Of Stress State And Bond Strength Of Fiber-Reinforced Polymer/Concrete Interface To Boundary Conditions In Single Shear Pull-Out Test, Tayyebeh Mohammadi, Baolin Wan

Civil and Environmental Engineering Faculty Research and Publications

The bond between fiber-reinforced polymer and concrete substrate plays a key role in the performance of concrete structures after strengthened by externally bonded fiber-reinforced polymer composite materials. The single shear pull-out test is generally used to determine the interface characteristics, and various bond–slip models have been proposed based on the results of this test. However, the sensitivity of the bond strength to the boundary conditions has not yet been considered in the available models in the literatures. This article presents an experimental and numerical study targeted at understanding the influence of the boundary conditions on the bond strength of the …

Bs News May/June

Building Services Engineering

No abstract provided.

Drive Plate Mass Polar Moment Of Inertia In Stokeo Type Resonant Column Devices, Michael Ryan Deschenes

Civil Engineering Undergraduate Honors Theses

The calibration procedure employed by researchers at the University of Arkansas (UA) to calibrate two Stokoe-type resonant column torsional shear (RCTS) devices is presented herein. Specifically, the development of a device-specific calibration process to determine the mass polar moment of inertia of the RCTS drive plate assemblies (J0), as a function of frequency, is described. Three aluminum calibration specimens and three stainless steel masses with known geometric and material properties were utilized to experimentally determine the J0 values. Experimental data collected by researchers at the University of Arkansas and obtained from other sources (Utah State University, the University of Texas …

Alkali-Silica Reaction Mitigation Using High Volume Class C Fly Ash, Sydney Marie Dickson

Civil Engineering Undergraduate Honors Theses

Fly ash is the residue produced from coal combustion in electric generating plants. There are two types of fly ash, Class C and Class F. Approximately 40 percent of fly ash generated from coal combustion can be used as a partial replacement of cement in concrete. Incorporating fly ash improves concrete properties and extends its service life. Alkali-silica reaction (ASR) is an expansive reaction between reactive silica typically found in aggregates (rock and sand) and alkalis in cement. This reaction results in the formation of a gel that absorbs water and swells, which exerts an internal pressure in concrete. This …

Analyzing Stochastically Generated Material Properties For The Use In Mumerical Simulations Of Advanced Laboratory Tests Of Asphalt Concrete, Ken K. Rutabana

Civil Engineering Undergraduate Honors Theses

For such a large country as the US, adequate road transportation is a vital necessity that ensures the safety, prosperity, and development of the people. Covering 94% of the two million miles of paved roads and highways, asphalt concrete is essential to this country. This is one reason why it is crucial to understand the potential and limitations of asphalt concrete. Unfortunately, material testing is a costly and time consuming ordeal. Consequently, numerical modeling of asphalt testing using computer software has been successfully developed in the last decades. These models corroborate those obtained in the lab but are intended as …

Development Of Optimal Experimental Design Parameters For Pseudo Ambient Vibration Testing Of Bridges, David Samudio Castillo

Civil Engineering Undergraduate Honors Theses

The United States of America is facing an infrastructure crisis that is characterized by aging and deteriorating structures, a significant backlog of maintenance and upgrades for existing infrastructure, limited funding and lack of practical and effective tools for identifying and prioritizing the most pressing infrastructure needs. The American Association of Civil Engineers (ASCE) qualifies America’s infrastructure with a D+(ASCE Report Card). This rating reflects the general state of infrastructure that is unlikely to improve dramatically in the short-term, yet the situation costs the nation billions of dollars annually due to losses in economic efficiency and productivity, and in some cases …

Effect Of Void Geometry On Strength, Stiffness, And Failure Modes Of Rock-Like Materials, Omed Yousif

UNLV Theses, Dissertations, Professional Papers, and Capstones

The host rock of portion of the first proposed high-level nuclear waste repository in the United States of America (Yucca Mountain, Nevada) is tuff rock that contains voids (lithophysae) with different shapes, sizes, and distributions. The existence of these voids can cause a dramatic change in the rock's mechanical properties such as uniaxial compressive strength, UCS, and Young's modulus, E. Accordingly, in an experimental program, the effects of void existence on the engineering properties of the tuff rocks was explored in a work of US Department of Energy conducted in the Department of Civil and Environmental Engineering and Construction of …

The Use Of Cod, Toc, Fluorescence, And Absorbance Spectroscopy To Estimate Biochemical Oxygen Demand In Wastewater, Evelyn Aramaine Christian

UNLV Theses, Dissertations, Professional Papers, and Capstones

All wastewater treatment facilities must obtain a National Pollution Discharge Elimination System (NPDES) permit, which regulates the quality of water that is discharged. Common to all NPDES permits is a limit on organic matter, as determined by the five-day biochemical oxygen demand (BOD5) test. More rapid methods, such as chemical oxygen demand (COD), total organic carbon (TOC), fluorescence, and absorbance spectroscopy are also capable of quantifying organic matter. Previous studies indicate it is possible to develop correlations between these parameters. This study explored the correlations using influent, primary clarifier effluent, and finished effluent samples from an operational wastewater treatment plant …

Prediction Of Shear Strength And Ductility Of Cyclically Loaded Reinforced Concrete Columns Using Artificial Intelligence, Nicholas Gordon

UNLV Theses, Dissertations, Professional Papers, and Capstones

The shear strength and deformation capacities of reinforced concrete (RC) columns are governed by a multitude of variables related to material properties of the steel and concrete used in the design and construction of the columns. Predicting performance of RC columns using design variables is a complex, non-linear problem. The prediction of shear strength and ductility for these types of structural members has historically been performed using empirically or semi-empirically derived formulae based on experimental results. The introduction of cyclical lateral loading, such as the forces imposed on a structure during an earthquake, can result in severe degradation of shear …

Potential Of Greywater Reuse And Its Effects On Potable Water Demand Management And Downstream Sewer Network, Muhammad Ashfaque Rajput Abdul Hameed

Theses

The UAE’s water demand is rapidly increasing because of population growth, infrastructure development, expansion of agricultural practices, and desert greening policies. These circumstances force the country to depend on expansive desalinated water and made the country the second-largest desalination water producer in the world. It is essential to reduce the current water consumption rates by using efficient methods and conservation techniques. Greywater reuse is an effective and promising alternative to cope with this challenge. The study aimed to reduce water consumption in the Emirate of Abu Dhabi by investigating the potential of greywater reuse. A field survey was carried out …

Capacity Models For Multilane Roundabouts And Their Evaluation Using Microscopic Simulation Models, Mohamad A. Shrayteh

Theses

Compared to previous versions of the manual, the Highway Capacity Manual 2010 has provided more comprehensive capacity models for single and multilane roundabouts. The Highway Capacity Manual 2010 multilane roundabout capacity models are limited to two-by-two lanes, that is, two entry lanes and two circulating lanes. These capacity models are not valid for the three-by-three–lane roundabouts (three entry lanes and three circulating lanes) due to different traffic flow characteristics and features. This limitation of the Highway Capacity Manual 2010 model is also clearly mentioned in the manual. In this research, capacity models and curves were developed for three-by-three–lane roundabouts. More …

Bulbous Pier: Alternative To Bridge Pier Extensions, Amilcar Chavez

UNLV Theses, Dissertations, Professional Papers, and Capstones

Bridge deck splashing causes deterioration to the bridge structure and renders the bridge unsafe for motorist and pedestrians. The traditional countermeasure for bridge deck splashing is pier extension, the pier extension moves the pier wave away from the bridge deck, but retrofitting existing bridges with pier extensions is costly. This research proposes the bulbous pier concept as an alternative to pier extension.

The decrease in the pier wave produced by the bulb is due to energy subtracted by the bulb via two forces, the viscous resistance, and the wave-making resistance. The proposed mathematical model for the bulbous pier design follows …

Properties Of Concrete Containing Ggbf Slag And Nano-Silica, Mohammad Sajjadul Islam

UNLV Theses, Dissertations, Professional Papers, and Capstones

Ground granulated blast furnace slag (GGBFS), a by-product from steel production, has been used as a partial replacement of portland cement in concrete for over a century. It constitutes a beneficial reuse of a by-product material, less consumption of portland cement concrete. Lower consumption of portland cement concrete can help reduce construction cost. Furthermore, it lowers the industrial carbon footprint, and landfill disposal which is a major environmental issue the world is facing today. The chemical composition of GGBF slag is similar to portland cement with hydraulic properties and additional pozzolanic properties with excellent alkali silica reactivity mitigation and resistance …

Benefits Of A State Driveway Database With Qualitative And Quantitative Crash Analysis, Andrew Bryant Stokes

All Theses

The primary goal of this research is to show how a fully developed driveway database will improve access management practices resulting in a reduction in crashes, injuries, and fatalities on our roadways. The results of this thesis highlight a close relationship between driveway characteristics and the incidence of crashes. Thus, it is critical to be proactive in enforcing access management strategies and policies that are designed to enhance driveway safety without compromising the economic vitality of land use along roads. The analysis identified several significant independent variables that influence crash rates either positively or negatively. The data driven approach to …

Decision Environments To Encourage More Sustainable Infrastructure Outcomes, Earl Shealy

All Dissertations

Physical infrastructure (i.e. roads, pipelines, airports, dams, landfills, and water treatment systems) contributes directly to sustainability outcomes such as energy and water use and climate changing emissions. The infrastructure built today will likely impact future generations for many years. Planning, design and development decisions about infrastructure are critical to the future performance of these systems. Such decisions about infrastructure are complex with multiple variables, alternative options, and design stages. To manage decisions that exceed cognitive capacity to consider all options, decision makers often create mental shortcuts (heuristics), and accompanied errors (biases). The potential cognitive biases when dealing with complex decisions …

Hazard Quantification And Loss Estimation For Combined Hurricane Wind And Flood, Bin Pei

All Dissertations

This research work focused on developing and evaluating the methodologies proposed for hazard quantification and loss estimation of the combined hurricane wind and flood. The overall research was divided into three studies. A methodology to quantify the joint occurrence probability of hurricane wind and flood was first introduced in Study I. A procedure to select ensembles of hazard-consistent full-track hurricane scenarios (i.e. with similar return periods) was proposed next in Study II. Finally in Study III, a new hurricane mitigation framework was developed using the agent-based modeling (ABM) technology to evaluate the effectiveness of incentive programs under both hurricane wind …