Civil Engineering Commons^™

Review Of Load Rating And Posting Procedures And Requirements, Raymond Neal Chou

Open Access Theses

All states are required to load rate and post bridges in order to comply with federal standards. Load ratings are performed in order to determine the safe live load capacity of a bridge, considering the existing conditions of the bridge. Based on the load ratings, the bridge is evaluated for load posting or strengthening. The Indiana Department of Transportation (INDOT) was notified that their practice for load rating and posting did not satisfy 23 CFR 650.313, which states that bridges shall be load rated and posted according to an American Association of State Highway and Transportation Officials (AASHTO) manual. The …

A Framework For Coordinating Water Distribution System And Pavement Infrastructure M&R Based On Lcca, Majed Fedhi Alinizzi

Open Access Theses

The disruptions the public faces daily around the world due to urban infrastructure Maintenance and Rehabilitation (M&R) activities are having significant social, economic, and environment impacts on communities. With respect to water distribution systems, there have been millions of water main breaks in the U.S. since January 2000, with an average of nearly 700 water main breaks every day. The majority of these water utilities lie under paved roads, and the Open Cut method is the most widely used technology for repairing water main breakages. Subsequently, this continually increasing pipe breakage requires the destruction of pavements that may be in …

Size And Rate Effects On Mechanical Behavior Of Ultra High Performance Concrete, Boon Him Lim

Open Access Theses

Cor-Tuf, broadly characterize as a reactive powder concrete is a type of cementitious material. Cementitious materials have been observed to exhibit a strain-rate dependent mechanical behavior. The mechanical behavior of cementitious materials can also depend significantly on specimen sizes. Therefore it is crucial to determine the behavior of Cor-Tuf with different specimen sizes for high-rate applications. For this purpose, split Hopkinson pressure bar (SHPB), also known as Kolsky bar was utilized to determine the dynamic behavior of Cor-Tuf for different specimen sizes under uniaxial dynamic compression loading at different strain rates. It was observed that as strain rate increases the …

Modeling The Dynamics Of Household-Level Hurricane Evacuation Timing Decisions, Md. Tawfiq Sarwar

Open Access Theses

Frequent occurrences of hurricanes in the coastal areas of the United States in recent times have indicated the necessity of comprehensive evacuation planning. Failure to ensure efficient and timely evacuation causes devastating impacts including loss of lives and property damages. In order to ensure efficient evacuation, emergency officials need to understand how households make evacuation decisions and how their decisions can be influenced. Households' decisions to evacuate/stay, time of departure, route choice and destination choice are four fundamental behavioral issues in the evacuation process. In this thesis, we develop a joint modeling approach for both household-level evacuation decision and departure …

Laboratory Testing Of Railroad Flatcars For Use As Highway Bridges On Low-Volume Roads To Determine Ultimate Strength And Redundancy, Teresa Lynn Washeleski

Open Access Theses

Railroad flatcars (RRFCs) are a convenient option to replace existing deteriorating bridge structures on low-volume roads. They are typically used as the bridge superstructure by placing two or more flatcars side-by-side to achieve the desired bridge width. Utilizing RRFCs as a bridge allows for rapid construction and greater cost savings compared to traditional practices. These benefits make them an attractive solution for rural communities in Indiana, as well as other states.

Uncertainty remains about the response under higher loads than could be easily achieved in the field and the level of redundancy of railroad flatcar bridges. Using RRFCs as bridges …

Evaluating Different Bridge Management Strategies Using The Bridge Management Research System (Bmrs), Timothy Paul Stroshine

Open Access Theses

This project investigated the effects of varying two different elements of bridge management strategies. The first element was a trigger value (an NBI condition rating for a bridge component) at which a maintenance treatment can be performed. The second element was the budget.

A new software program, the Bridge Management Research System (BMRS), was created to test these elements of bridge management strategies for Indiana's bridge network. BMRS is a simplified version of a previous bridge management software package developed by Purdue University, the Indiana Bridge Management System (IBMS). To test variations in the trigger values, three different bridge management …

Simulating Land Use Land Cover Change Using Data Mining And Machine Learning Algorithms, Amin Tayyebi

Open Access Dissertations

The objectives of this dissertation are to: (1) review the breadth and depth of land use land cover (LUCC) issues that are being addressed by the land change science community by discussing how an existing model, Purdue's Land Transformation Model (LTM), has been used to better understand these very important issues; (2) summarize the current state-of-the-art in LUCC modeling in an attempt to provide a context for the advances in LUCC modeling presented here; (3) use a variety of statistical, data mining and machine learning algorithms to model single LUCC transitions in diverse regions of the world (e.g. United States …

Interactional Analysis Of Emergent Risks In Institutionally Diverse Construction Projects, Nader Naderpajouh

Open Access Dissertations

Naderpajouh, Nader Ph.D., Purdue University, December 2013. Interactional Analysis of Emergent Risks in Institutionally Diverse Construction Projects. Major Professor: Makarand Hastak.

Construction projects, as complex systems of systems (SOS), increasingly involve institutionally diverse actors that escalate complexity of the projects. Examples of these actors include the export credit agencies, international organizations such as the World Bank, non-governmental organizations (NGO), regulatory actors, transnational organizations, as well as public and community groups. The observed surge in complexity of the projects aim to enhance their robustness in: i) sustaining the increasing demand for service of these projects, and ii) sustaining the contextual fluctuation …

Work-Of-Indentation As A Means To Characterize Indenter Geometry And Load-Displacement Response Of A Material, Kaushal K. Jha, Shuo Zhang, Nakin Suksawang, Ton-Lo Wang, Arvind Agarwal

Mechanical and Civil Engineering Faculty Publications

Normalized indentation works, referred to as the total and elastic energy constants, have been shown to be effective in the representation and analysis of experimental load-displacement data. However, their physical meaning, influencing factors, variation range and relationships with other nanomechanical quantities are not precisely known. In this study, the load-displacement data obtained as a result of simulations of elastic and elastoplastic indentations are extensively analyzed to enhance our understanding concerning these two energy based parameters. It has been shown that while the total energy constant describes the state of an indenter tip and the type of contact regime, the elastic …

Evaluation Of J-Turn Intersection Design Performance In Missouri, Final Report, Praveen Edara Ph.D., P.E., Ptoe, Carlos Sun Ph.D., P.E., Jd, Sawyer Breslow

Mid-America Transportation Center: Final Reports and Technical Briefs

Research shows that a high percentage of crashes that take place on high-speed rural expressways occur at intersections with minor roads. One low-cost alternative design for improving the safety of at-grade intersections on such expressways is the J-turn. In the last few years, the Missouri Department of Transportation has converted some two-way stop controlled (TWSC) intersections into J-turns. This study evaluated the effectiveness of the J-turn intersection design in Missouri utilizing field studies, a public survey, crash analysis, and traffic conflict analysis. The field studies collected detailed video data at a J-turn site and a control site. The crash analysis …

Towards Autonomous Vehicles, Chris Schwarz Ph.D., Geb Thomas Ph.D., Kory Nelson B.S, Michael Mccrary B.S., Nicholas Schlarmann, Matthew Powell

Mid-America Transportation Center: Final Reports and Technical Briefs

We are moving towards an age of autonomous vehicles. Cycles of innovation initiated in the public and private sectors have led one into another since the 1990s; and out of these efforts have sprung a variety of Advanced Driver Assistance Systems and several functioning autonomous vehicles. The challenges that face autonomous vehicle are still significant. There is still technical work to be done to make sensors, algorithms, control schemes, and intelligence more effective and more reliable. As automation in vehicles increases, the associated human factors challenges become more complex. Then, there are a host of socioeconomic issues. Are autonomous vehicles …

Fe Modeling In Support Of Vibration Based Damage Detection In Bridges, James Kyle Bethay

Electronic Theses and Dissertations

Vibration based damage detection in bridges is examined with the objective of defining a relationship between substructure stiffness degradation and frequency and mode shape modulation induced by damage. The relationship is explored through finite element modeling of primarily an experimental representation of a three-span concrete bridge structure located at the entrance to the main campus of The University of Mississippi in Oxford. Equivalent beam and 3D finite element models are created of an experimental setup incorporating levels of damage simulated using deck slab bearing pads of varying stiffness. Eigenvalue analysis is performed to examine the change of frequencies for characteristic …

Nanoenhanced Polyurea As A Blast Resistant Coating For Concrete Masonry Walls, Heather Kathryn Daniell Rivera

Electronic Theses and Dissertations

Blast impact is a major concern in the world today. The leading cause of death due to blast impacts is rapidly moving debris. To prevent this many researchers are looking for methods of improved blast resistance for concrete masonry walls. However, many available protective coatings are not flame retardant. This thesis focuses on nanoenhanced polyurea for applications in improving blast resistance, while possessing improved flame retardancy, of concrete masonry walls. The polyurea that is being researched is enhanced with nanoadditives in an effort improve both blast and fire resistance. These materials are dynamically tested and those showing marked improvement are …

Mechanical Properties Of Portland Cement And Its Constituents At The Nano-Level, Brent French

Electronic Theses and Dissertations

The following is a summary of research for a portion of the project titled Nano to Continuum Multi-Scale Modeling Techniques and Analysis For Cementitious Materials Under Dynamic Loading in association with North Carolina Agricultural & Technical State University and the US Army. This research investigates several attempts at creating a better Portland cement model at the atomistic level through molecular dynamics simulations. These models are modified to simulate damage to the basic cement structure, and are simulated using several combinations of forcefields and molecular dynamics tools. Experimental techniques such as nanoindentation, atomic force microscopy, and x-ray diffraction are applied to …

3-D Numerical Simulation Of Dam-Break Flows Over Movable Beds, Reza Marsooli

Electronic Theses and Dissertations

Irvin Cooper was a prominent music educator in boys’ adolescent voice change research. Dr. Cooper developed the Cambiata concept as a method for teaching boys to sing throughout the voice change. This method was starkly different from the traditional model that encouraged the changing voice to be rested during the voice change. While working as the music supervisor for the Montreal protestant school system, Cooper developed his method of having boys sing during the voice change, which included arrangements and compositions specifically for changing voices. Cooper taught many prominent researchers of adolescent voice change, including Don Collins and John Cooksey. …

The Potential For The Elimination Of Expansion Joints And Bridge Bearings From Existing Road Bridges In Ireland, Conor Keena

Theses

This research was focused on determining the feasibility of eliminating expansion joints and bridge bearings from existing short to medium span road bridges in Ireland. It is possible that this could provide a significant long-term economic benefit to bridge owners. A literature review was carried out as part of the research. This included investigations into research conducted in the areas of thermal movements of bridges, concrete creep and shrinkage, soil-structure interaction, lifetime costing, design standards and finite element analysis, and the elimination of bridge expansion joints in other countries.

Finite element analyses were carried out on two existing road bridges. …

Sustainability Analysis Of Intelligent Transportation Systems, Tolga Ercan

Electronic Theses and Dissertations

Commuters in urban areas suffer from traffic congestion on a daily basis. The increasing number of vehicles and vehicle miles traveled (VMT) are exacerbating this congested roadway problem for society. Although literature contains numerous studies that strive to propose solutions to this congestion problem, the problem is still prevalent today. Traffic congestion problem affects society’s quality of life socially, economically, and environmentally. In order to alleviate the unsustainable impacts of the congested roadway problem, Intelligent Transportation Systems (ITS) has been utilized to improve sustainable transportation systems in the world. The purpose of this thesis is to analyze the sustainable impacts …

Development Of The Strategy To Select Optimum Reflective Cracking Mitigation Methods For The Hot-Mix Asphalt Overlays In Florida, Hamid Maherinia

Electronic Theses and Dissertations

Hot Mix Asphalt (HMA) overlay is a major rehabilitation treatment for the existing deteriorated pavements (both flexible and rigid pavements). Reflective cracking (RC) is the most common distress type appearing in the HMA overlays which structurally and functionally degrades the whole pavement structure, especially under high traffic volume. Although many studies have been conducted to identify the best performing RC mitigation technique, the level of success varies from premature failure to good performance in the field. In Florida, Asphalt Rubber Membrane Interlayers (ARMIs) have been used as a RC mitigation technique but its field performance has not been successful. In …

Analytical And Experimental Study Of Monitoring For Chain-Like Nonlinear Dynamic Systems, Bryan Paul

Electronic Theses and Dissertations

Inverse analysis of nonlinear dynamic systems is an important area of research in the eld of structural health monitoring for civil engineering structures. Structural damage usually involves localized nonlinear behaviors of dynamic systems that evolve into different classes of nonlinearity as well as change system parameter values. Numerous parametric modal analysis techniques (e.g., eigensystem realization algorithm and subspace identification method) have been developed for system identification of multi-degree-of-freedom dynamic systems. However, those methods are usually limited to linear systems and known for poor sensitivity to localized damage. On the other hand, non-parametric identification methods (e.g., artificial neural networks) are advantageous …

Effect Of Suction On Dynamic Properties Of Unsaturated Soils At Mid- To High-Shear Strain Amplitudes, Alejandro Hernan Pino Bravo

Civil Engineering Theses - Archive

This paper presents the results from an experimental study that has been designed to assess the effect of the suction and net mean stress on the dynamic properties of poorly graded sand with silt subjected to small- to mid-shear strains. The practical implication of this study includes determining the effect on soil stiffness properties of increased matric suction (transpiration of water) at different net mean stresses (or depths) in the field. The engineering analysis of earth structures subjected to static and non-static loading under unsaturated conditions requires knowing the relevant parameters of the soil, such as shear wave velocity, shear …

Lrfd Pullout Resistance Factor Calibration For Soil Nails Incorporating Survival Analysis And Plaxis 2d, Brett Devries

Civil Engineering Theses - Archive

The use of soil nail walls (SNWs) in the United States has increased since their introduction in the mid-1970's, to where currently the analysis, design and construction are commonly performed (Lazarte, 2011). These SNW designs were mostly based on ASD methods and LRFD-based methodologies were lacking until the 1998 FHWA manual on SNW design (Byrne, Cotton, Porterfield, Wolschlag and Ueblacker, 1998), which provided uncalibrated resistance factors developed from ASD safety factors. As a result, little improvement was made toward a more efficient design, until fully calibrated LRFD pullout resistance factors were provided in the NCHRP Report 701 (Lazarte, 2011). These …

Two-Dimensional Hydrodynamic Modeling Of Two-Phase Flow For Understanding Geyser Phenomena In Urban Stormwater System, Zhiyu S. Shao

Theses and Dissertations--Civil Engineering

During intense rain events a stormwater system can fill rapidly and undergo a transition from open channel flow to pressurized flow. This transition can create large discrete pockets of trapped air in the system. These pockets are pressurized in the horizontal reaches of the system and then are released through vertical vents. In extreme cases, the transition and release of air pockets can create a geyser feature.

The current models are inadequate for simulating mixed flows with complicated air-water interactions, such as geysers. Additionally, the simulation of air escaping in the vertical dropshaft is greatly simplified, or completely ignored, in …

Camber Control In Simply Supported Prestressed Concrete Bridge Girders, Osamah Ibrahim Mahmood

Theses and Dissertations--Civil Engineering

When designing a bridge, serviceability usually controls and is a more important factor than the ultimate capacity of the bridge or the allowable stresses. Therefore, the behavior of the bridge girder deflection and camber must be predicted as accurately as possible. Therefore, excessive camber has become one of the most common problems when constructing concrete bridges. Different methods have been developed to overcome this problem. The most common and widely used is using haunch with adjustable pedestals to overcome the excessive camber. However, this method has limitations that must be considered. Therefore, this study is evaluating the effectiveness of using …

Unsaturated Soil Parameters From Field Stiffness Measurements, Jason M. Curd

Theses and Dissertations--Civil Engineering

The behavior of unsaturated soils depends heavily on material properties and soil conditions. In Geotechnical Engineering, compacted soils are frequently used as fill material, and quality control is vital to the construction process. There are few methods available to estimate the parameters associated with unsaturated soils based on field measurements, and a relationship between these factors could reduce testing time and lower construction costs. Undrained triaxial tests were performed on four clays representing a range of material properties in an effort to reach the maximum dry density, which provides the highest bearing capacity. Each clay was compacted at optimum moisture …

Moisture And Unit Weight Readings From A Complex Impedance Measuring Instrument, Kirk Andrew Jenkins

Theses and Dissertations--Civil Engineering

Complex Impedance Measuring Instruments (CIMI’s) are non-nuclear devices that calculate the dry unit weight and moisture content of soil by means of electromagnetic wave propagation theory. Unlike nuclear based test devices, these devices do not require certification or elaborate maintenance to own and operate. CIMI operation requires a soil specific calibration process where soil moisture and unit weight are correlated to electrical parameters. A new, smaller acrylic mold was developed as an alternative calibration tool to the manufacturer’s recommended mold. Calibrated soil models were generated using manufacturer recommended procedures as well as new procedures involving an acrylic mold. Models were …

Water Quality Sensor Placement Guidance For Small Water Distribution Systems, Stacey L. Schal

Theses and Dissertations--Civil Engineering

Water distribution systems are vulnerable to intentional, along with accidental, contamination of the water supply. Contamination warning systems (CWS) are strategies to lessen the effects of contamination by delivering early indication of an event. Online quality monitoring, a network of sensors that can assess water quality and alert an operator of contamination, is a critical component of CWS, but utilities are faced with the decision of what locations are optimal for deployment of sensors. A sensor placement algorithm was developed and implemented in a commercial network distribution model (i.e. KYPIPE) to aid small utilities in sensor placement. The developed sensor …

Kentrack 4.0: A Railway Trackbed Structural Design Program, Shushu Liu

Theses and Dissertations--Civil Engineering

The KENTRACK program is a finite element based railway trackbed structural design program that can be utilized to analyze trackbeds having various combinations of all-granular and asphalt-bound layered support. It is applicable for calculating compressive stresses at the top of subgrade, indicative of potential long-term trackbed settlement failure. Furthermore, for trackbeds containing asphalt layer, it is applicable for calculating tensile strains at the bottom of the asphalt layer, indicative of potential fatigue cracking. The program was recently expanded to include both English and international units. A procedure has been incorporated to provide a path to save results in a text …

Pressure Measurement At The Ballast-Tie Interface Of Railroad Track Using Matrix Based Tactile Surface Sensors, Michael T. Mchenry

Theses and Dissertations--Civil Engineering

The pressure distribution at the ballast-tie interface of railroad track plays a key role in overall track support. Failure of the ballast or tie can result from excessive loads that were not designed for, requiring increased maintenance and reducing railroad operating efficiency. Understanding the forces acting on the ballast and tie are required to design higher performance and longer lasting track. To further this understanding, the use of Matrix Based Tactile Surface Sensors (MBTSS) is employed to measure the actual pressure distribution at the ballast-tie interface, characterized by individual ballast particle contact points and non-uniform pressures. The research explores this …

Development Of A Design Based Intersection Safety Performance Evaluation Tool, Adam J. Kirk

Theses and Dissertations--Civil Engineering

The purpose of this research is to develop an intersection safety evaluation tool that is capable of assisting designers and planners in the assessment of alternative intersection designs. A conflict exposure model utilizing design hour volumes, intersection configuration and traffic control measures is proposed to achieve this goal. This approach makes use of data typically available for preliminary intersection design. The research goes beyond existing safety performance models which only examine non-directional average daily traffic (ADT) or practices which only account for the geometric and lane configuration of an intersection, such as conflict point analysis.

Conflict prediction models are developed …

Hydrologic Characterization Of A Rain Garden Mitigating Stormwater Runoff From A Commercial Area, John T. Mcmaine

Theses and Dissertations--Biosystems and Agricultural Engineering

Impervious surfaces such as roads, sidewalks, and roofs increase the volume of runoff generated in a watershed. Traditional stormwater management techniques emphasize conveyance of runoff away from impervious surfaces in order to reduce flooding. Rain gardens are becoming popular as a different means to manage stormwater in such a way that runoff is captured and infiltrated onsite rather than conveyed offsite. A stormwater management system consisting of a rainwater harvest system, rain garden, and infiltration chamber was built at the Coca-Cola Refreshments USA, Inc. distribution center in Lexington, Kentucky during the fall of 2011. Precipitation, inflow, and water level were …