Civil Engineering Commons^™

Research Project Work Plan For Impact Of Cascadia Subduction Zone Earthquake On The Seismic Evaluation Criteria Of Bridges, Peter Dusicka

Civil and Environmental Engineering Faculty Publications and Presentations

The goal of this project is to provide ODOT with the best rational estimate of ground acceleration values for designing new and retrofitting existing bridges. The objectives are to:

• evaluate the hazard by contrasting the acceleration values from individual CSZ events to PSHA values
• provide experimental evidence of damage difference under longer duration shaking expected from CSZ event

An Investigation Into The Water Budget And The Management Of The Snake River System, John Whitney Hildreth

Boise State University Theses and Dissertations

Future climate change poses a major conceptual challenge to the availability of water resources due to the uncertainty involved with changes to the hydrologic cycle. Over the past decades, observed warming temperatures across the Western United Sates have shown significant impacts on river basin scale hydrology. This research uses physically based modeling tools to assess the hydrologic impacts of climate change in the Snake River Basin. Physically based hydrologic modeling studies of future climate do not typically take into account interactions between groundwater and surface water. To account for these interactions, the Variable Infiltration Capacity model is coupled with the …

Performance Comparison Of Design-Build And Construction Manager/General Contractor Highway Projects, Binita Shakya

UNLV Theses, Dissertations, Professional Papers, and Capstones

Researchers have conducted numerous studies comparing project performance of design-bid-build (DBB) and design-build (DB) highway projects. However, little research has been done to compare the performance of DB and construction manager/general contractor (CM/GC) highway projects. Therefore, an exploratory study was conducted to compare the performance of 55 DB and 34 CM/GC highway projects from various States Departments of Transportation (DOTs) in terms of cost, change orders, and construction intensity. The results showed that contract award cost growth was significantly lower in DB projects than in CM/GC projects. In contrast to this, the total cost growth of DB projects was higher …

Feasibility Of The Use Of Ultrasound Measurements For Grade Verification Of The Performance Grade Asphalt Binders, Mehdi Khalili

UNLV Theses, Dissertations, Professional Papers, and Capstones

This research investigates the feasibility of application of high frequency immersion ultrasonic measurement (UM) to discriminate different performance grade (PG) asphalt binders. PG asphalt binder is one of the main components of hot mix asphalt used for roadway construction. UT may provide an inexpensive alternative to sophisticated tests currently used for quality control of PG asphalt binders. Nine different PG asphalt binders used were selected for this investigation. Velocity (V) and integrated response (IR) of the ultrasonic wave were measured. The IR is a measure of the ratio of ultrasonic energy transmitted into the material to the ultrasonic energy reflected …

Evaluation Of Alternative Project Delivery Methods In Water And Wastewater Projects, Ruiko Maharjan

UNLV Theses, Dissertations, Professional Papers, and Capstones

The United States (U.S.) is facing significant challenges in addressing aging water infrastructure. Most of the drinking water infrastructure is reaching the end of their useful lives. The American Water Works Association (AWWA) estimated that it will cost about $1 trillion to repair or replace drinking water pipes. Over the next 20 years, it will cost about $298 billion to fix or expand pipes of the nation's wastewater and storm-water systems (AWWA, 2012). Owners, engineers, and contractors are using Alternative Project Delivery (APD) methods - e.g., Design-Build Construction Management-at-Risk Construction Management/General Contractor- to build water and wastewater projects in order …

A Case Study Of Zero Energy Home Built For Solar Decathlon Competition 2013, Sanjib Mulepati

UNLV Theses, Dissertations, Professional Papers, and Capstones

Energy consumption in residential homes has been a subject of research related to sustainability. Reduction in the consumption of energy is a goal of sustainable construction. The Department of Energy (DOE) started a Solar Decathlon competition in 2002 in which the students from different universities around the globe build an energy efficient and affordable home suitable for their climate and location. The main goal of this competition is to select the best home that is designed and built in a sustainable way. In this study, the home designed and constructed for participation in the competition by the students at University …

Optimal Retrofit Strategy Design For Highway Bridges Under Seismic Hazards: A Case Study Of Charleston, Sc, Shawn Parmelee

All Theses

A significant number of US highway bridges are inadequate for seismic loads and could be seriously damaged or collapse during a relatively small earthquake. On the most recent infrastructure report card from the American Society of Civil Engineers (ASCE), one-third of the bridges in the United States are deemed to be structurally deficient. To improve this situation, at-risk bridges must be identified, evaluated, and effective retrofitting programs implemented to reduce their seismic vulnerabilities. In practice, the Federal Highway Administration uses the expected damage method and indices method to assess the condition of bridges. These methods compare the severity of expected …

Evaluating The Predictive Capability Of Numerical Models Considering Robustness To Non-Probabilistic Uncertianty In The Input Parameters, Parker Shields

All Theses

The paradigm of model evaluation is challenged by compensations between various forms of errors and uncertainties that are inherent to the model development process due to, for instance, imprecise model input parameters, scarcity of experimental data and lack of knowledge regarding an accurate mathematical representation of the system. When calibrating model input parameters based on fidelity to experiments, such compensations lead to non-unique solutions. In turn, the existence of non-unique solutions makes the selection and use of one `best' numerical model risky. Therefore, it becomes necessary to evaluate model performance based not only on the fidelity of the predictions to …

Safety And Operational Characteristics Of Lane Widths On Urban And Rural Roadways A Simulator Study, Meredith Ladue

All Theses

The primary goal for this study was to further evaluate and assess the effect of lane width on the safety and operation of roadways in South Carolina. Due to various site conditions that affect the safety and operations of roadways, highway design engineers often face many challenges when developing appropriate road design standards. To investigate specific site conditions for the South Carolina Department of Transportation (SCDOT) a research study took place. In 2011, Part 1 of this research included field studies conducted by Kevin Baumann and Trey Jordan. Due to the various limitations of the field studies it was evident …

Seismic Site Coefficient Model And Improved Design Response Spectra Based On Conditions In South Carolina, Shimelies Aboye

All Dissertations

A new seismic site coefficient model is developed from the results of over 60,000 total stress, one-dimensional equivalent ground response simulations assuming conditions in South Carolina. Computed site coefficients ( F ) are plotted versus average shear wave velocity in the top 30 m (V_S30 ) and grouped by location, spectral acceleration (S_outcrop ) and spectral period. Locations considered in the Coastal Plain include Aiken, Charleston, Columbia, Florence, Lake Marion, Myrtle Beach, and the South Carolina side of Savannah. Locations considered in the Piedmont include Columbia, Greenville, Greenwood, and Rock Hill. In all the plots of …

Development Of A Field Test For Total Suspended Solids Analysis, Jessica Branigan

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Total suspended solids (TSS) are all particles in water that will not pass through a glass fiber filter with a pore size less than 2 μm, including sediments, algae, nutrients, and metals. TSS is an important water quality parameter because of its adverse effects on aquatic species and wildlife. The EPA has proposed a regulation for turbidity, a related water quality parameter, which has been stayed pending further testing. TSS is regulated through the EPA via the NPDES in many states. Since there are no accepted field tests for TSS, projects with TSS regulations must send samples to a laboratory …

The Effect Of Skew Angle On Average Queue Delay At Tee-Intersections: A Simulation Study Using The Texas Model, Manogna Kaluva

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

This thesis explores the effect of intersection skew angle on average queue delay through simulation. The simulation model used is the TEXAS (Traffic Experimental and Analytical Simulation) model. This microscopic simulation model uses a general nonlinear car-following model. It simulates individual intersections and was designed to capture the interaction of traffic operations and intersection geometry.

Simulation models were developed for three stop-controlled, tee-intersections in Lincoln, Nebraska. Field data to develop and calibrate the simulation models were collected. All simulation models were calibrated by adjusting the car following parameters. An experimental design was developed to test the effect of skew angle …

Establishing Key Performance Indicators To Measure The Benefit Of Introducing The Facilities Manager At An Early Stage In The Building Information Modelling Process, Barry Mcauley, Alan V. Hore, Roger West

Conference papers

The Facilities Manager occupies a unique position within the lifecycle of a building asset, as he/she is one of the only Architectural, Engineering, and Construction/Facilities Management (AEC / FM) professionals who is in a position to view the product of the entire design and build process. Despite the potential benefits that the Facilities Manager offers, this profession still remains largely undeveloped and still does not command the recognition it deserves within the AEC/FM sector. This is beginning to change through the introduction of Building Information Modelling (BIM) which can offer a new level of functionality for the management of buildings …

Public / Private Bim: An Irish Perspective, Barry Mcauley, Alan V. Hore, John Deeney

Conference papers

The current economic difficulties have affected most practitioners within the industry and, as a result, many firms and contractors are bidding for fewer projects, resulting in below-cost tenders. It is clear that, many firms and contractors are now operating on thin margins; which makes it increasingly difficult for them to commit to the introduction of new software applications and system upgrades. The transition to Building Information Modelling (BIM) from traditional 2D CAD by Irish firms and contractors has been a relatively slow process compared with our international colleagues. There are many reasons for this, including lack of resources, lack of …

Johnson, Leland Ross, 1937-2014 (Sc 2788), Manuscripts & Folklife Archives

Manuscript Collection Finding Aids

Finding aid only for Manuscripts Small Collection 2788. Typed research notes on notecards relating to reservoir development on the Green River in Kentucky.

A Comparison Of Bituminous Coal-Based And Coconut Shell-Based Activated Carbon For Removal Of Trace Hazardous Air Pollutants In Landfill Gas, Annaprabha Athappan, Melanie L. Sattler

Civil Engineering Faculty Publications - Archive

This study explored adsorption as a method of controlling hazardous air pollutant emissions from landfill gas (LFG). In particular, the study compared bituminous coal-based (BPL) and coconut shell-based (OVC) activated carbons as adsorbents for the hazardous landfill gas constituents para-, ortho-, and meta-xylene; ethylbenzene; and methyl ethyl ketone (MEK). Experiments were designed to replicate typical field usage conditions, using ambient temperature and relative humidity values, and testing the carbon as is, without pretreatment to remove moisture. BPL and OVC carbons from Calgon Carbon were tested in vials, with initial headspace concentrations ranging from 2130 to 5020 ppmv (86 to 120 …

Approximating The Seismic Amplification Effects Experienced By Solar Towers Mounted On The Rooftops Of Low-Rise Industrial Buildings, Peter Luiz Balla

Master's Theses

This thesis investigates the acceleration amplification experienced by solar towers mounted on the rooftops of low-rise industrial buildings during a seismic event. Specifically, this thesis looks to assess the validity of using amplification factors adopted by the ASCE 7-05Minimum Design Loads for Buildings and Other Structures to approximate seismic acceleration amplification for roof-mounted solar towers. To investigate the validity of the ASCE 7-05 amplification factors, this thesis conducts timehistory analyses of three theoretical solar towers mounted on the roof of a case study building. The time history analyses are conducted in the finite element computer modeling program SAP 2000 using …

Bs News November/December

Building Services Engineering

No abstract provided.

Crystalline Cellulose – Atomistic Modeling Toolkit, Mateo Gomez, Pablo Zavattieri Dr.

The Summer Undergraduate Research Fellowship (SURF) Symposium

Nature has created efficient strategies to make materials with hierarchical internal structure that often exhibit exceptional mechanical properties. One such example is found in cellulose, in fact it is eight times stronger than stainless steel and advantage is that cellulose incredibly cheap, because processing is obtained from purified wood pulp (it is environmental friendly). The most prevalent modeling technique to study the fundamental mechanical behavior of the crystalline cellulose has been Molecular Dynamics (MD). As a predictive tool, MD allows us to study the behavior of crystalline cellulose at the atomic level, and as such, it accurately predicts the crystalline …

Semi-Active Structural Control Of A 2-Story Shear Building, Alana K. Wilbee, Shirley Dyke

The Summer Undergraduate Research Fellowship (SURF) Symposium

With continuing urban development across the world, it is becoming ever more important to provide increased structural safety against events such as earthquakes and strong winds. The field of structural control has recently been growing to meet these challenges through the use of semi-active control methods, such as the Magnetorheological (MR) Damper. However, due to the non-linearity of the device, the knowledge base surrounding the MR Damper and its various control algorithms still needs to be strengthened before large-scale implementation of this control method can occur. To address these issues, this study will examine a two story benchmark structure using …

Compression Testing And Failure Modes Of Steel-Concrete Composite (Sc) Structures For Nuclear Containment, Patrick Michael Wanamaker, Amit H. Varma

The Summer Undergraduate Research Fellowship (SURF) Symposium

Although being able to provide much cleaner power than burning coal and other fossil fuels, nuclear power plants are still a tough sell to the general public due to their history of being spontaneously dangerous. The containment structures surrounding these nuclear plants, however, can play a huge role in reducing the risks associated with them. Relatively new designs for these containment assemblies, known as SC (steel-concrete composite) structures, aim to increase the strength and durability of the containment facilities while keeping costs down. By varying the spacing between shear studs, the ratio of concrete to steel, and the ratio of …

Real-Time-Hybrid-Simulation Of Multi-Degree-Of-Freedom Systems With Multiple Time Steps, Lanxi Liu, Arun Prakash

The Summer Undergraduate Research Fellowship (SURF) Symposium

Computational simulation and physical experiments are both widely used in testing the response of a structure under earthquake loadings, but physical experiments can be expensive for large problems and numerical may result in the loss of important structural behavior caused by a large amount of assumptions. Real-time hybrid simulation (RTHS) is a combination of these two approaches, which uses both a numerical and physical substructures that interact in real time to simulate structural behavior. The numerical and physical substructures are connected using a transfer system that enforces compatibility between them. The physical substructure needs to be run at a very …

Insights Into The Effect Of Geometrical Parameters In The Mechanical Properties Of The Radular Teeth Of The Cryptochiton Stelleri – A 3d Print Approach, Chan Jeong, Enrique Escobar, Pablo Zavattieri Dr.

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Cryptochiton Stelleri is known to have ultra-hard radular teeth that have one of the largest hardness (9-12GPa) and stiffness (90-125GPa) among other biological materials such as Enamel and Abalone shell. The ultrastructure of the teeth is formed by a bundle of highly mineralized rods composed of iron oxides and organic material. The main method to measure the material properties has been through nanoindentation. However there are limitations to nanoindentation of the Chiton’s teeth such as limited equipment, costly and time consuming preparation of the samples, and observation of nanoscale features being difficult. In this work, the rod-like microstructure of …

Environmental Monitoring In Preparation For The Installation Of A Green Roof, Andrew N. Martin, Ming Qu

The Summer Undergraduate Research Fellowship (SURF) Symposium

Green roofs are becoming an increasingly popular way to improve the environmental, economic, and aesthetic performance of both new and existing buildings. Along with the green roofs themselves, it is also common to install sensors to measure various environmental parameters that are affected by or important to the operation of the roof such as precipitation, temperature, and runoff. However, for most of these systems, the sensors are installed at the same time or even after the green roof. Therefore, no before-and-after comparisons can be made for those roofs. To account for this missing data, monitoring equipment was installed on a …

Water Resources Planning - Fall 2013 - University Of Massachusetts Amherst, Richard Palmer

All ECSTATIC Materials

Water Resources Planning course taught by Richard Palmer offered in Fall 2013 at University of Massachusetts Amherst. Course materials include lecture slides on specified topics (.ppt and .pdf) and 8 exercises:

Exercise 1 - Fairweather planning (Exer1-2013.pdf)

Exercise 2 - Developing a team (Exer2-2013.pdf)

Exercise 3 - Problems, Opportunities, and Goals Revisited (Exer3-2013.pdf)

Exercise 4 - Defining the Status Quo (Exer4-2013.pdf)

Exercise 5 - Shared Vision Models (Exer5-2013.pdf)

Exercise 6 - Formulating Alternative Plans (Exer6-2013.pdf)

Exercise 7 - Measures of Performance (Exer7-2013.pdf)

Exercise 8 - Selecting Among Alternatives (Exer8-2013.pdf)

Materials also include an example student final report (NOFAWAC_FINAL-Planning Report.pdf)

Water Resource Economics And Management - University Of North Carolina At Chapel Hill, Greg Characklis

All ECSTATIC Materials

Graduate course in water resources economics and management offered at University of North Carolina at Chapel Hill in Fall 2013.

Environmental Systems Modeling And Management - University Of Virginia, Charlottesville, Teresa Culver

All ECSTATIC Materials

Grad/Undergrad course in environmental systems modeling and management offered at University of Virginia, Charlottesville in Fall 2013.

Water Resources Planning And Management - Michigan Technological University, Houghton, David Watkins

All ECSTATIC Materials

Graduate course in water resources planning and management offered at Michigan Technological University, Houghton in Fall 2013.

Field Procedure For Estimating The Measurement Area Of Non-Contact Temperature Sensors, M. Khanal, R. Davidson

Civil Engineering Faculty Publications and Presentations

Transportation departments across the United States have installed sensors mounted on towers by the roadside to measure road surface temperatures. Since no guidelines exist for verifying the accuracy of such measurements, agencies are forced to accept claims made by vendors. To correct this situation, the Idaho Transportation Department (ITD) contracted with Boise State University (BSU) to test the accuracy of the non-contact, infrared temperature sensors installed throughout Idaho. Before collecting independent temperature data, BSU devised an easy-to-use procedure for determining the effective area viewed by the infrared sensors. According to ITD, the vendor claimed that at a distance of 10 …

Learning About A Career Interest Using Different Platform: Civil Engineering Research, Saeed Aldawsari

Undergraduate Research Award

No abstract provided.