Civil Engineering Commons^™

Assessing The Potential For Seepage Barrier Defects To Propagate Into Seepage Erosion Mechanisms, Ryan G. Van Leuven

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Seepage barriers have been used extensively to mitigate seepage problems in dams and levees. Although the design of many of these dams and levees has been based on intact barriers, seepage barriers have been shown to be susceptible to deformation and cracking when high differential hydraulic pressures act across the barrier. Under certain conditions, these cracks can lead to serious seepage problems, which could potentially lead to the development of a low-resistance seepage pathway. Three scenarios have been identified where there is the potential for erosion to occur adjacent to a crack in a barrier: 1) erosion at the interface …

Discharge Coefficient Performance Of Venturi, Standard Concentric Orifice Plate, V-Cone, And Wedge Flow Meters At Small Reynolds Numbers, Colter L. Hollingshead

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The relationship between the Reynolds number (Re) and discharge coefficients (C) was investigated through differential pressure flow meters. The focus of the study was directed toward very small Reynolds numbers commonly associated with pipeline transportation of viscous fluids. There is currently a relatively small amount of research that has been performed in this area for the Venturi, standard orifice plate, V-cone, and wedge flow meters. The Computational Fluid Dynamics (CFD) program FLUENT^© was used to perform the research, while GAMBIT^© was used as the preprocessing tool for the flow meter models created. Heavy oil and water were used …

Economic Input–Output Life Cycle Assessment Of Water Reuse Strategies In Residential Buildings And Communities, Derek J. Gardels

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The objective of this study was to determine the environmental sustainability and economic feasibility of five water reuse designs using economic input-output life cycle assessments and benefit/cost analyses. These five water reuse designs were evaluated for four regions of the United States including the Northwest (Seattle), Southwest (Scottsdale), Midwest (Omaha), and Southeast (Tampa). The water reuse designs include a greywater reuse system with no treatment for sub-surface landscape irrigation for a single-family residential house (Model 1), an indoor greywater reuse system with treatment for toilet flushing and laundry washing for a single-family residential house (Model 2), a hybrid untreated greywater …

Live-Load Testing And Finite-Element Analysis Of A Steel Cantilevered Deck Arched Pratt Truss Bridge For The Long-Term Bridge Performance Program, Matthew P. Laurendeau

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The Long Term Bridge Performance (LTBP) program is an organization within the Federal Highway Administration that inspects, tests, analyzes, and observes, for an extended period of time, a variety of bridge types throughout the United States. Part of the program includes periodic testing of select bridges of a span of 20 years. The Kettle River Bridge located outside of Sandstone, Minnesota was selected for study due to its unique design.

The Kettle River Bridge is a historical steel cantilevered deck arched Pratt truss bridge. The bridge was instrumented with 151 strain gauges on various floor and truss members along with …

Gis Based Pavement Maintenance: A Systematic Approach, Robert J. Kmetz

Purdue Polytechnic Directed Projects

Abstract

According to 2008 Federal Highway Administration (FHWA) statistics, there are 2,734,102 miles of paved public roads in the United Sates, with an additional 1,324,245 miles of unpaved public roads.  Road conditions deteriorate with time as the result of weather effects, deicing salts, and vehicle loads.  The most common pavement distress includes cracking, rutting, and potholes.  These pavement defects must be repaired to restore the pavement to a satisfactory service level for road users. According to the FHWA, in 2006 approximately $54.2 billion dollars was spent on maintenance and expansion, just on U.S. highways alone.

Routine maintenance is a cost …

Effects Of Electromagnetic Stimulation On Soil’S Hydraulic Conductivity, Jonathan Rocha, Arvin Farid, Jim Browning

College of Engineering Poster Presentations

Our research involves the identification of the different effects that electromagnetic (EM) stimulation has on varying soil properties; properties such as hydraulic conductivity. This work could prove to be of importance in furthering our understanding of the effects of EM stimulation with regard to the hydraulic conductivity of soil. A positive correlation between EM stimulation and an increase in hydraulic conductivity could have broad applications for environmental contaminant mitigation in soils and for various geotechnical construction applications such as minimizing soil setup during pile driving operations. EM waves can be used to enhance soil and groundwater remediation in a way …

Development Of Approximating Functions To Model And Predict The Properties Of Fresh And Hardened Fly Ash-Based Geopolymer Concrete, Eleazar Ivan Diaz Loya

Doctoral Dissertations

The manuscript presented herein is based on the investigation of the mechanical properties of fly ash-based geopolymer concrete and their link to fly ash (FA) characteristics. A database of 32 FA samples was created. Each FA sample was analyzed in terms of chemical composition, crystallographic properties and particle size distribution. The mechanical performance of geopolymer concrete (GPC) made from each FA sample was evaluated in terms of density, setting time, compressive and flexural strength, static elastic modulus and Poisson's ratio. It is worth mentioning that the author has already published preliminary results of this study (Diaz and Allouche, 2010; Diaz …

The Solvent Effectiveness On Extraction Process Of Seaweed Pigment, Warkoyo Warkoyo, Elfi Anis Saati

Makara Journal of Technology

Eucheuma cottonii seaweed is a species of seaweed cultured in Indonesian waters, because its cultivation is relatively easy and inexpensive. It has a wide variety of colors from green to yellow green, gray, red and brown, indicating photosynthetic pigments, such as chlorophyll and carotenoids. An important factor in the effectiveness of pigment extraction is the choice of solvent. The correct type of solvent in the extraction method of specific natural materials is important so that a pigment with optimum quality that is also benefical to the society can be produced. The target of this research is to obtain a high …

Addressing Water Quality Issues In Rural Cameroon With Household Biosand Filters, Laine Klopfensten, Laura Petrasky, Valerie Winton, Jeff Brown

Publications

This paper describes an ongoing collaboration between the Hope College student chapter of Engineers Without Borders – USA and the rural community of Nkuv in the Northwest Province of Cameroon related to improving drinking water quality using Manz biosand filters. The collaboration began in 2006 and focused on developing a community-based construction and distribution model for household water treatment units. Results from microbiology testing of the constructed filters indicate that this water treatment method is effective for improving water quality in rural areas. The results also highlight the need for ongoing assessment and adapting community education programs to provide necessary …

Cottonwood Riparian Site Selection On The Cheyenne River Sioux Reservation, Julie A. Thorstenson, Diane Rickerl, Janet H. Gritzner

Great Plains Research: A Journal of Natural and Social Sciences (through 2013)

The construction of the Oahe Dam on the Missouri River eliminated thousands of acres ofriparian and floodplain lands on the Cheyenne River Sioux Reservation in South Dakota. Restoration is needed to replace wildlife habitat. This study focused on site selection for native cottonwood (Populus deltoides Bartr. Ex Marsh. ssp. Monilifers (Ait.) Eckenwalde) restoration to help mitigate this loss. Geographic information systems technologies were used to develop a suitability model for cottonwood restoration. Tribal lands were extracted from a digital dataset oflandownership. Those touched by or included in a 46 m border of the Moreau River were candidate sites. Of …

Circuit Design For Sensor Detection Signal Conditioner Nitrate Content, Robeth Viktoria Manurung, Aminuddin Debataraja, Hiskia Hiskia

Makara Journal of Technology

Circuit Design for Sensor Detection Signal Conditioner Nitrate Content. Nitrate is one of macro nutrients very important for agriculture. The availability of nitrate in soil is limited because it is very easy to leaching by rain, therefore nitrate could be contaminated ground water by over-process of fertilizer. This process could also produce inefficiency in agriculture if it happened continuesly without pre-analysis of farm field. The answer those problems, it is need to develop the ion sensor system to measure concentrations of nitrat in soil. The system is consist of nitrate ion sensor device, signal conditioning and data acquisition circuit. The …

Production Of Lovastatin And Sulochrin By Aspergillus Terreus Using Solid State Fermentation, Rizna Triana Dewi, Nina Artanti, Hani Mulyani, Puspa Dewi Narrij Lotulung, Minarti Minarti

Makara Journal of Technology

Lovastatin is an anti-cholesterol agent that was produced by Aspergillus terreus using solid state fermentation (SSF). During this fermentation process, sulochrin is also produced as an unwanted co-metabolite. However, our previous result showed that sulochrin had potential as antidiabetes because it is an inhibitor agent of α-glucosidase. In this paper, we reported our observation on lovastatin and sulochrin production pattern in relation with inhibitor α-glucosidase activity during eleven days fermentation of A. terreus koji (SSF) ethyl acetate extract. Koji obtained from solid state fermentation with rice as the substrate and incubated at room temperature, sample is taken daily for eleven …

The Zonation Of Abration Speed Characteristics And Its Handling Technique Of Jalinbar Of North Bengkulu As Vital Band Transportation, Suwarsono Suwarsono, Supiyati Supiyati, Suwardi Suwardi

Makara Journal of Technology

The Zonation of Abration Speed Characteristics and its Handling Technique of Jalinbar of North Bengkulu as Vital Band Transportation. Jalinbar Bengkulu is a vital infrastructure for traffic service, goods, agriculture products, mining, plantation and oils distribution. Abration due to scour of seawater often make these roads jammed and discrupts the peoples economy movement. The aims of this research was to investigate the abration speed of all segment of Jalinbar. The research method was a combination of two methods: A determination of swash energy of sea water using photometer and determination of rocks binding energy using douche method. The result shows …

The Formation Design Of Noise Reducers From Plywood, Foam, Tray, Dan Coconut Fiber For Static Sources, Melati Ferianita Fachrul, Wisnu Eka Yulyanto, Asharani Merya

Makara Journal of Technology

The Formation Design of Noise Reducers from Plywood, Foam, Tray, dan Coconut Fiber for Static Sources. Research was conducted in a semi-anechoic room using a method referring to the ISO 3745. The design used is the Hemisphere in which the source of noise is analogous to engines in an industry. The value reduction in the rate of sound power is obtained by comparing the sound power level before and after control is given. The noise control test materials used consist of layers of plywood, foam, fiber and tray (egg box). The effectiveness of these materials is tested by measuring the …

Performance Of Indiana’S Superpave Hma Mixtures, Ayesha Shah, Rebecca Mcdaniel

JTRP Technical Reports

This project followed the performance of a number of hot mix asphalt paving projects for seven to eight years in an attempt to relate laboratory test results to field performance. First, a small scale study compared sampling locations, specific gravity test procedures and compaction devices used on two samples from projects, one with volumetric acceptance and one with non-volumetric acceptance, to determine the best combination to use for Part 2 of the study. In Part 2, 12 projects constructed in 2001 and 2002 were sampled, tested and monitored. Laboratory testing involved determining maximum and bulk specific gravities, binder content, air …

A Study Of The Correlation Of Sub-Aqueous Beach Profile Change And The Coastal Storm Impulse (Cosi) Parameter, Kevin Bryan Conner

Civil & Environmental Engineering Theses & Dissertations

The Coastal Storm Impulse (COSI) parameter is a recently developed storm-strength parameter that was first introduced at the San Diego, California International Conference of Coastal Engineering in 2006 (ICCE) and further examined in 2008 at the ICCE in Hamburg, Germany. This new parameter used the principles of conservation of horizontal momentum to combine storm characteristics such as surge, wave dynamics, currents, and duration into a relative scale used to classify and measure storm response and impacts. The resultant classification system was intended to evaluate potential coastal erosion and the associated loss of coastal infrastructure, as well as provide a storm …

Natural Gas As Petroleum Fuel Substitution: Analysis Of Supply-Demand Projections, Infrastructures, Investments And End-User Prices, Abdul Qoyum Tjandranegara, Arsegianto Arsegianto, Widodo Wahyu Purwanto

Makara Journal of Technology

The petroleum fuels (PF) subsidy has long burdens the government spending, and discourages less expensive energy usage such as natural gas (NG). Exporting NG and importing the more expensive PF products cause financial losses to Indonesia. The lack of NG infrastructure is the main hurdle in maximizing domestic NG usage and so does the perception of its high investment costs burdening government spending and pushing the NG transportation cost up. This study calculates the required NG infrastructure and its investments for several levels of PF substitutions up to 2030. To balance the NG demands, the supply from each field and …

The Synergy Of Recombinant Xylanolytic Enzyme On Xylan Hydrolysis, One Asmarani, Bambang Prajogo Eko Wardojo, Ni Nyoman Tri Puspaningsih

Makara Journal of Technology

Microbial xylanases or xylanolytic enzyme have received considerable attention over the last years owing to a multitude of possible applications. These enzymes have potential in the biodegradation of lignocellulosic biomass to fuels, chemicals, fruit juice, animal feed and in improving rumen digestion. More recently, the use of xylanases as bleaching agent in the pulp and paper industry has been suggested to replace of some of the chemicals presently used for this purpose. Such applications could have an important positive impact on the environment. The purpose of this research was determining the synergy of 3 recombinant xylanolytic enzymes (β-xylosidase, exo-xylanase and …

Cradle To Gate Simple Life Cycle Assessment Of Biodiesel Production In Indonesi, Akhmad Hidayatno, Teuku Yuri M. Zagloel, Widodo Wahyu Purwanto, Carissa Carissa, Lindi Anggraini

Makara Journal of Technology

The focus of this research is to analyze potential environmental impact in the supply chain of palm oil biodiesel industries. Simple Life Cycle Assessment (LCA) is applied to analyze impacts, produced by the three main units in the supply chain of Palm-Oil-based Biodiesel, which are Palm Plantation, CPO mill, and Biodiesel Plant. We developed LCA calculation model using spreadsheet software, used to assess a number of input scenarios to evaluate the best scenario, in variation of: land quality, land area and the rate of clearing, land clearing technique and type of the original land. The biggest potential environmental impact is …

Characterization Of Surface Active Shell Charcoal Nyamplung Seeds (Calophyllum Inophyllum Linn), Santiyo Wibowo, Wasrin Syafi, Gustan Pari

Makara Journal of Technology

Characterization of Surface Active Shell Charcoal Nyamplung Seeds (Calophyllum inophyllum Linn). Chemical and physical activation of nyamplung shell with 0%, 5%, and 10% H3PO4 for 60 and 120 minutes has been carried out to prepare activated charcoal. The purpose of this experiment was to look into the characteristic of nyamplung shell activated charcoal surface. Nyamplung shell was carbonized into charcoal, then activated by immersion in H3PO4 solution using 0%, 5% and 10%, for 24 hours, and heated in retort at two temperatures (700 and 800 oC) and two duration (60 and 120 minutes). The material were characterized by fourier transform …

An Investigation Into The Resistance/Powering And Seakeeping Characteristics Of River Catamaran And Trimarana, Murdijanto Murdijanto, I Ketut Aria Pria Utama, Andi Jamaluddin

Makara Journal of Technology

The increase of fuel price has caused fleet operational and shipping business to be in danger situation. The fuel consumption of a ship is influenced by ship volume or wetted area which contributes directly to the increase of ship resistance and the size of main engine. In order to find out the appropriate answers, a series of investigation into river transportation using monohull, catamaran and trimaran types of vessel was carried out. The work focused on the estimation of total resistance and powering as well as seakeeping characteristics and carried out experimentally using tank test and numerically using a ship …

Determining The Standard Value Of The Oily Distortion Of Acquisition The Fingerprint Images, Rahmat Syam, Mochamad Hariadi, Mauridhi Hery Purnomo

Makara Journal of Technology

Determining the Standard Value of the Oily Distortion of Acquisition the Fingerprint Images. This research describes a novel procedure for determining the standard value of the oily distortion of acquisition the fingerprint images based on the score of clarity and ridge-valley thickness ratio. The fingerprint image is quantized into blocks size 32 x 32 pixels. Inside each block, an orientation line, which perpendicular to the ridge direction, is computed. The center of the block along the ridge direction, a two-dimension (2-D) vector V1 (slanted square) with the pixel size 32 x 13 pixels can be extracted and transformed to a …

Are Ieee 754 32-Bit And 64-Bit Binary Floating-Point Accurate Enough?, Bernaridho Hutabarat, I Ketut Eddy Purnama, Mochamad Hariadi, Mauridhi Hery Purnomo

Makara Journal of Technology

This paper describes a research toward the accuracy of floating-point values, and effort to reveal the real accuracy. The methods used in this research paper are assignment of values, assignment of value of arithmetic expressions, and output the values using floating-point value format that helps reveal the accuracy. The programming-tool used are Visual C# 9, Visual C++ 9, Java 5, and Visual BASIC 9. These tools run on top of Intel 80 x 86 hardware. The results show that 1*10-x cannot be accurately represented, and the approximate accuracy ranges only from 7 to 16 decimal digits.

Ergonomic Analysis Of Garment Industry Using Posture Evaluation Index (Pei) In Virtual Environment, Erlinda Muslim, Boy Nurtjahyo, Romadhani Ardi

Makara Journal of Technology

Ergonomic Analysis of Garment Industry using Posture Evaluation Index (PEI) in Virtual Environment. This research tried to study, in a virtual environment, the ergonomics of four divisions in garment industry: cutting division, sewing division, button division, and finishing division. Variables that influence the working conditions in each division are different; depend on the real situations that happened. The purpose is to assess the real working conditions based on ergonomics study using Posture Evaluation Index (PEI). PEI integrates the scores of low back analysis (LBA), ovako working posture (OWAS), and rapid upper limb assessment (RULA). Analysis phase was done using digital …

Formation Of Caco3 Particle And Conductivity Of Na2co3 And Cacl2 Solution Under Magnetic Field On Dynamic Fluid System, Nelson Saksono, Setijo Bismo, Roekmijati Widaningroem, Azwar Manaf

Makara Journal of Technology

Hard water causes the CaCO3 scale formation on the pipe walls and heat exchanger equipments in industrial or domestic water processes. A great number of experimental researches on the prevention of the CaCO3 precipitation process by magnetic field have been carried out. In this research, Na2CO3 and CaCl2 solutions was magnetized in the circulated flow condition (dynamic fluid system). The velocity of fluid and the circulation time was modified to examine its influences to the magnetization process. CaCO3 content was measured by titration method of EDTA complexometry. Conductivity test was conducted to find out hydrate ion bonding. The results showed …

Two-Class Classification With Various Characteristics Based On Kernel Principal Component Analysis And Support Vector Machines, Ivanna Kristianti Timotius, Iwan Setyawan, Andreas Ardian Febrianto

Makara Journal of Technology

Two class pattern classification problems appeared in many applications. In some applications, the characteristic of the members in a class is dissimilar. This paper proposed a classification system for this problem. The proposed system was developed based on the combination of kernel principal component analysis (KPCA) and support vector machines (SVMs). This system has been implemented in a two class face recognition problem. The average of the classification rate in this face image classification is 82.5%.

A Petri Net Simulation Model For Virtual Construction Of Earthmoving Operations, F. F. Cheng, Y. W. Wang, Yong Bai

Civil and Environmental Engineering Faculty Research and Publications

A common and extended Petri net simulation framework for virtual construction of earthmoving operations is developed to simulate dynamic changes of workflow and information flow in the earthmoving construction process and illustrate the constraint relationship between various operational equipment and construction restrictions. The proposed framework considers factors that influence earthmoving operations including randomness of construction activities, individual preference of equipment scheduling, and constraint relationship between equipment and construction environment. With the given equipment availability and project indirect cost, the framework can predict construction situation, equipment utilization rate, estimated duration and cost to achieve visualized and intelligent scheduling of virtual construction …

Mitigating Moisture Susceptibility In Hot-Mix Asphalt Concrete, Tom P. Nguyen

Master's Theses

Moisture damage in asphalt pavement has always been a problem for drivers, bicyclists, and pedestrians. The primary objective of this study is to evaluate moisture susceptibility of Hot-Mix Asphalt (HMA) and to investigate mitigation techniques using different antistripping agents. Three types of antistripping agents were used in this research investigation. Two of which are chemical based and the other is hydrated lime. The two types of liquid antistripping agents used in this study include Arr Maz CC LOF-6500 and Arr Maz CC XL-9000. These two liquid antistripping agents were tested at 0.25%, 0.50%, and 0.75%. Hydrated Lime was tested at …

Influence Of Nozzle Pressure, Standoff Distance, And Reinforcing Steel Cage On Water Jetting Of Cidh Pile Anomalies, Matthew Jason Schaffer

Master's Theses

The effectiveness of removing anomalous material from cast-in-drilled-hole (CIDH) piles by water jetting was examined.  The primary objectives of this research were to examine how reinforcing steel influences water jetting and to evaluate how jetting pressures and standoff distance from the material surface affect water jetting of concrete type materials and PVC tubing.  The experimental work consisted of water blasting submerged test specimens using rotary jets, nozzles, pumping equipment, and testing procedures currently used in construction practice.  The concrete test specimens were comprised of ring- and cylinder-shaped samples, containing materials with compressive strengths of approximately 160 and 3,600 psi.  Typical …

Optimization Of Point-Of-Use Water Treatment Device For Disaster Relief, Margaret June Herzog

Master's Theses

Point-of-use (POU) drinking water treatment is a common method of providing drinking water in disaster relief situations when critical water infrastructure is damaged. In these cases, POU treatment devices can be used to treat local water until relief organizations set up more permanent water provision methods. One such POU technology is PŪR^® Purifier of Water, a combined coagulation/flocculation and disinfection chemical treatment sachet produced by Procter & Gamble. PŪR^® has been shown to treat contaminated water to meet water quality standards and guidelines set by the U.S. EPA for water purifiers and by the World Health Organization and …