Civil Engineering Commons^™

Development And Testing Of Chemically-Based Self-Consolidating Concrete, Mark Daniel Ezzell

Masters Theses

"Self-consolidating concrete (SCC) possesses several characteristics that can benefit the concrete construction industry including accelerated construction, a reduction in labor and equipment, and a reduction in construction noise through eliminating or reducing the need to vibrate the concrete. However, SCC has some potential downsides. These problems can usually be attributed to higher paste content, higher fines content, rounder aggregate, and higher water to cement (w/c) ratios used to increase the flow of the concrete. The goal of this research project was to develop a SCC that had improved material properties through the use of chemical admixtures instead of modifications to …

"Long" Carbon Fiber Reinforced Concrete For Impact And Blast Resistance, Benjamin Paul Gliha

Masters Theses

"One of the most commonly used materials for protective structures and construction is traditional reinforced concrete. However, in a blast, conventional reinforced concrete (RC) is susceptible to significant spalling (small to medium size chunks of concrete detaching from the original member). The force of the blast turns spalled concrete into projectiles, resulting in secondary fragmentation and the majority of loss of life. Furthermore, the concrete debris makes for difficult and uncertain footing. Both phenomena endanger personnel and complicate post-blast recovery efforts. A very promising but barely explored change to conventional RC construction is the addition of "long" carbon fibers (fibers …

A Statewide Analysis Of Highway Safety In Arkansas, Uday R. R. Manepalli

Masters Theses

"This research concentrated on two major aspects of highway safety analysis, hotspot identification and identification of crash contributing factors on highways. The objective of the first part of this thesis is to evaluate two crash frequency, three crash severity and two composite hotspot ranking methods. Based on the limitations of the existing hotspot identification methods (HSID), crash factor method (CFM), a crash severity based HSID method is proposed. A composite rank method (F 1) based on principal component analysis is also proposed. These methods are evaluated using three tests, the site consistency test, the method consistency test, and the total …

Determining The R Values For 12 Inch Deep Z-Purlins And Girts With Through-Fastened Panels Under Suction Loading, Kaye Dee Wibbenmeyer

Masters Theses

"Designing purlins for roof systems attached to through-fastened panels has been a subject well researched in the past. The current design specification uses a simplified approach to the designing of these members where the fully braced moment capacity of such members is multiplied by a reduction factor, commonly referred to as the R-value. This value represents the point in between the fully braced and fully unbraced member behavior. However, the current AISI Specification, S100, only contains R-values for purlins and girts up to 11.5 inches in depth. Since manufacturers are now rolling sections up to 12 inches deep, two confirmatory …

Corrosion Resistance Of Enamel-Coated Steel Reinforcement For Concrete, Charles Robert Werner

Masters Theses

"Originally developed to enhance the bond between concrete and steel, reactive enamel coatings have shown great promise in protecting steel from corrosive environments. However, the corrosion resistance of the material has not yet been tested beyond 40 days. Moreover, when the material was tested, it was applied to smooth steel pins, not deformed steel bars which are commonly used in reinforced concrete structures. Therefore, this study focused on the corrosion resistance of three different enamel coatings, along with a standard epoxy coating, each of which were applied to both smooth and deformed steel bars and included both short-term and long-term …

Nonlinear Finite Element Formulation Of The Soil Structure Interaction Through Two Parameter Foundation Model, Taraka Ravi Shankar Mullapudi

Masters Theses

"The response of shallow and raft foundations is having a significant importance due to its complex behavior because of the semi-infinite soil media. Winkler's model is the simplest model to deal with the structure and soil. The Winkler model represents the foundation reaction as proportional to the soil displacement at a particular point, which results in the elasticity of the soil being the only parameter in consideration. But in reality the soil cohesiveness is having a significant contribution in soil structure interaction, and therefore the consideration of coupling effects of Winkler springs need to be accounted. Most of the existing …

The Effectiveness Of The Natural Resource Conservation Service (Nrcs) And Huff Rainfall Distribution Methods For Use In Detention Basin Design, Todd Wayne Dablemont

Masters Theses

"This thesis focuses on the effectiveness of the NRCS and Huff rainfall distribution methods for use in detention basin design. This study required the use of HEC-HMS, hydrologic modeling software, in order to analyze the distribution methods. Three separate detention basins and their watersheds were modeled for this study. The watersheds were analyzed for both undeveloped and developed conditions. The parameters analyzed include detention basin inflow, detention basin outflow, watershed peak discharge, and detention basin storage capacity. The determination of detention basin effectiveness was based upon these parameters. The NRCS distribution method is widely used; however, many who use it …

Field Investigation Of Spalling In Bridge Decks With Partial-Depth Precast Concrete Panel Systems Using Non-Destructive Testing, Kandi Rebecca Wieberg

Masters Theses

"This study involved the investigation of the causes of spalling observed in several partial-depth precast prestressed bridge decks in the state of Missouri. Recently it has been observed that several bridges in Missouri with this type of construction have experienced spalling of concrete at the edges of the panels revealing an extreme condition of corrosion in the prestressing tendons, some to the point of rupture. Ground penetrating radar (GPR), which has been shown to be successful in bridge deck evaluation, was used to determine the relative condition of the prestressing tendons as well as the relative condition of the concrete …

Stability Of Streambanks Subjected To Highly Variable Streamflows: The Osage River Downstream Of Bagnell Dam, Kathryn Nicole Heinley

Masters Theses

"Streambank erosion of the Osage River downstream of Bagnell Dam is naturally-occurring; however, it may be significantly worsened due to releases made from the dam to generate hydropower. In this study, six typical outflow release patterns from Bagnell Dam were evaluated to determine their effects, if any, on the stability and the rate and amount of erosion of the banks of the Osage River.

The Bank Stability and Toe Erosion Model (BSTEM), version 5.2, was used to carry out the erosion and stability calculations. The model was validated by using data from another study and comparing the results from BSTEM …

Evaluation Of Liquefaction-Induced Lateral Spreading In The Midwest, Kermit Nathanial Applegate

Masters Theses

"The Central United States is home to several seismically active regions: the Wabash Valley Seismic Zone, the South Central Illinois Seismic Zone, and the New Madrid Seismic Zone. All three of these regions are capable of inducing large ground motion throughout the Mississippi Valley and along the eastern border of Missouri. This has been supported by many paleoseismic studies conducted throughout the region, which have identified numerous instances of liquefaction phenomena. The fluvial deposition process associated with the Mississippi river valley makes it a prime location for possible liquefaction and lateral spreading effects. However, there are few studies pertaining to …

Calibration Of Resistance Factors For Axial Capacity Of Driven Pile Into Missouri Soil, Mulugeta Abay Kebede

Masters Theses

"Over the past two decades the load resistance factor design (LRFD) has been accepted by the American Association for Transportation and Highway Officials (AASHTO) for the design of bridges. This approach is now gaining widespread popularity in the United States for substructure bridge design, including the design of driven pile foundations, as the states calibrate the geotechnical resistance factors for local geological conditions and practices. This study presents the geotechnical resistance factors calibrated for axially driven pile using the first-order reliability method (FORM) for the target reliability index of 2.33 and 3.0 based on 64 end-of-drives (EOD) and 22 beginning-of …

Experimental And Modeling Comparison Of Modular Photovoltaic-Thermal Solar Panels, Nicole C. Annis

Masters Theses

"Three different prototype photovoltaic-thermal panels using water as the cooling fluid were tested simultaneously. The first two panels (Panel A and B) consisted of a highly conductive thermal sheeting and different sized copper tubing. The third panel (Panel C) consisted of copper tubing with an aluminum fin. Thermal images were used to verify the heat transfer across the panels and compare the amount of heat radiating off the back of the photovoltaic-thermal panels versus the standard photovoltaic paneleaf Three A type panels were thermally connected in series. Three photovoltaic panels were also tested for an electrical comparison. The purpose of …

Innovative Concrete Bridging Systems For Pedestrian Bridges: Implementation And Monitoring, Kurt Edward Bloch

Masters Theses

"Two precast, prestressed pedestrian bridges were designed for rapid construction in Rolla, MO, utilizing high-strength concrete (HSC) and high-strength self-consolidating concrete (HS-SCC) with a target 28 day compressive strength of 68.9 MPa (10,000 psi) and release compressive strength of 24.1 MPa (3,500 psi). In addition, a glass fiber reinforced polymer (GFRP) bar reinforced deck panel system was utilized in one of the two deck panels on each bridge.

Material properties were tested for compression, elastic modulus, modulus of rupture, splitting tensile strength, creep, and shrinkage following ASTM standards. Instrumentation systems within the spandrel beams and precast deck panels were implemented …

Analysis Of Nationwide Intercity Travel Demand On The Us Transportation Network, Tao Li

Masters Theses

"In this thesis, three issues about the intercity travel demand on the US transportation network are addressed. The final one is the estimation of the domestic passengers' delay cost. A scheme is designed by assuming that costs incurred by flight delays relative to the original flight schedules are imposed at passengers' final destination airports. It is applied to estimate the total domestic delay cost of year 2007 and reasonable results arc obtained. The second one is the air travel demand estimation. Two route-based optimization models are proposed to estimate the travel demand based on available data. It is shown that …

Glass Fiber-Reinforced Polyurea Strengthening Of Reinforced Concrete, Courtney Elizabeth Greene

Masters Theses

"Wide varieties of concrete repair-retrofit and strengthening methods have been developed and are being widely implemented. In recent years, the need for such strengthening systems has become apparent with increasing demands on aging infrastructure. These strengthening systems need to be increasingly more adaptable, providing ease of construction as well as withstanding a variety of loading conditions and hazards. Exterior-applied fiber-reinforced polymer systems are increasingly being used to meet these demands. The research contained herein investigates the strengthening benefits and characteristics from a specific glass fiber-reinforced polyurea coating system applied externally to structures by means of spraying. This coating would allow …

Bayesian Approaches On Observational Before-After Highway Safety Analysis, Daxiao Liu

Masters Theses

"Observational before-after evaluation of roadway safety treatments effect is a necessary and challenging study area for traffic safety engineers. In decades, empirical Bayesian approach has been widely adopted among researchers in this area. In this approach, the researcher combined before period observation data with a safety performance function estimated from similar groups to estimate the expected number of crashes that would have occurred in the after period without the treatment. Comparing this estimate with the number of crashes observed in the after period, the researcher evaluated the effectiveness of the treatment. This approach accounts for well-known regression-to-the-mean effects. However, as …

Evaluation Of Variable Speed Limits Using A Genetic Algorithm Approach To Calibrate A Vissim Model, Brian Joseph Schaefer

Masters Theses

"The variable speed limit (VSL) system has been adopted on more and more roadways across the globe as an engineering tool for controlling traffic flow, particularly during congestion situations. An important and fundamental question raised among traffic engineers is: Are the costs of installing and operating variable speed limits really justified? In order to answer this question, this thesis measures the effectiveness of the VSL system applying the VISSIM microscopic simulation model to a non-recurrent congestion situation. For the analysis, a section of interstate was modeled in VISSIM and calibrated so that the simulated results closely reproduce the observed data …

An Integrated Damping And Strengthening Strategy For Performance-Based Seismic Design And Retrofit Of Highway Bridges, Kazi Rezaul Karim

Masters Theses

"In this study, a damping-enhanced strengthening (DES) strategy was introduced to retrofit bridge structures for multiple performance objectives. The main objectives of this study are (1) to numerically demonstrate the effectiveness of the anchoring mechanism of a constrained damping layer in the proposed DES system, and (2) to evaluate the performances of a highway bridge retrofitted with a DES retrofit technique of viscoelastic (VE) damping and carbon-fiber-reinforced-polymer (CFRP) strengthening components that are nearly independent under weak earthquakes but strongly coupled under strong earthquakes"--Abstract, page v.

Screw Connections Subject To Tension Pull-Out And Shear Forces, Ryan M. Francka

Masters Theses

"Currently, the behavior of screw connections subject to combined tension pull-out and shear forces is not well understood. An experimental study was conducted at Missouri University of Science and Technology to better understand the relationship or interaction between these forces. The test program evaluated four parameters that may influence the behavior of pure tension and pure shear in screw connections: the thickness of the sheet not in contact with the screw head, the ultimate strength of the steel, the ductility of the steel, and the screw diameter. This investigation extends the application of the pure pull-out and pure shear equations …

Anchorage And Bond Characteristics Of Externally Bonded Frp Laminates Used For Shear Strengthening Of Rc And Pc Girders, Carlos Andres Ortega Ordonez

Masters Theses

"In the last three decades, the use of fiber reinforced polymer (FRP) materials to strengthen structures externally has emerged as one of the most promising technologies in materials and structural engineering, and these materials have been gaining popularity in the civil engineering community. Externally bonded FRP sheets and laminates have been used successfully to increase flexural and shear capacity. The overall performance of the strengthened system depends heavily on the quality of the bond between the concrete and the FRP laminate. Low bond strength can cause delamination at the fiber-matrix interface and at the FRP laminate-concrete interface. As a result, …

In-Plane Behavior Of Strengthened Unreinforced Masonry Infill Walls With Alternative Wood-Fiber Fly Ash Material, Yosuke Tanizawa

Masters Theses

"This research investigates the potential for an alternative masonry product to use in masonry infill wall systems. The study also investigates the effects of an external fiber reinforced polymer (FRP) strengthening system on in-plane behavior of the alternative unreinforced masonry (URM) walls. The alternative masonry product is produced in a solid unit configuration and utilizes recycled white oak wood-fibers and an ASTM Class-C fly ash as its raw materials. The external strengthening system investigated consists of an elastomeric polyurea surface coating with and without integrated discrete chopped E-glass fibers which is directly sprayed on the URM wall surfaces. The alternative …

An Evolutionary Algorithm Approach To Actuated Signal Timing Optimization Under Lane-By-Lane Detection Condition, Eric G. Strack

Masters Theses

"Motivated by the need to reduce congestion on the nation's roadway network, this research seeks to determine when a new detection scheme at actuated signalized intersections may help. This new detection scheme is called lane-by-lane detection. It "looks" at traffic in all lanes individually to determine the traffic volume on the roadway. Specifically, the problems addressed are investigating alternate signal timings and investigating the traffic volume's effect on performance of the detection scheme. For the alternate signal timings, an Evolutionary Algorithm (EA) was employed to identify the optimal signal timing. This algorithm creates signal timings and tests them in the …

A Laboratory Study Of Struvite Precipitation For Phosphorus Removal From Concentrated Animal Feeding Operation Wastewater, Sushmita Dhakal

Masters Theses

"Struvite precipitation occurs spontaneously in many wastewater treatment facilities as a nuisance. However, struvite precipitation is now being studied as a method to concurrently treat high phosphorus wastewaters and generate a valuable product. Many factors influence the precipitation of struvite such as component -ion molar ratios, pH, aeration, solubility, solids and mixing energy. In the present work, struvite precipitation in the actual swine wastewater was studied by strategically controlling aeration, pH, and mixing"--Abstract, page iv.

Performance Of Fire-Damaged Prestressed Concrete Bridges, Wendy Leann Moore

Masters Theses

"The purpose of this experimental program was to develop and analyze the effects of fire damage on prestressed concrete bridges. Flexural strength and serviceability of the bridge were measured by inputting fire damaged data into a parametric study spreadsheet consisting of a typical 3-span continuous prestressed concrete bridge. Data was obtained by exposing two types of specimens to different levels of elevated temperatures and then cooling them at room temperature to simulate fire damage. The two specimen types were prestressing strands which were tested in tension and concrete blocks with a single prestressing strand embedded in the center, which were …

Hazards Assessment Of St. Charles County - Earthquakes And Floods, Amy Lynn Krauch

Masters Theses

"Located on the northernmost limits of the St. Louis metropolitan area, St. Charles County has been, and continues to be, one of the fastest-growing counties in the country. The county consists of several major cities featuring extensive industry, retail, and agriculture. Bounded by the Missouri River on the south and the Mississippi River on the north and east, St. Charles County is predominantly flat, low-lying terrain at great risk to periodic flooding. The county is also well within the area of influence for several local seismic zones, increasing the susceptibility to earthquake damage. Given the apparent risk to both flood …

Laboratory Analysis Of Small Strain Moduli In Compacted Silts, David M. Weidinger

Masters Theses

"Soil compaction quality control accounts for a significant portion of geotechnical practice. Often the performance of a roadway can be directly linked to the quality of the compacted subgrade. A poor subgrade can result in weak areas in the road causing excessive deflections at the surface, ultimately leading to a pot hole or uneven surface and an unpleasant ride for the travelers. Vehicles passing over a section of highway causes small strains in the founding soil. These strains accumulate over time. A better understanding of how the compacted soil responds at small strains could shed light on improving the quality …

Experimental Validation Of An Integrated Frp And Visco-Elastic Hardening, Damping, And Wave-Modulating System For Blast Resistance Enhancement Of Rc Columns, Brian Henry Wood

Masters Theses

"In today's society, terrorist attacks and accidental explosions pose a major threat to critical infrastructure. Vulnerable to blast loading, structures must be rehabilitated to ensure structural stability and protect human life. The goal of this study is to develop and validate a sandwich composite technology for column retrofitting. The new technology consists of an inner fiber reinforced polymer (FRP) sheet, an outer FRP sheet, and a visco-elastic (VE) layer sandwiched between the two FRP sheets. The inner FRP sheet is wrapped around an existing column for confinement, while the outer FRP sheet is for anchoring of the VE layer into …

Electromagnetic Modeling Of Distributed Coaxial Cable Crack Sensors In Reinforced Concrete Members, Mei Wang

Masters Theses

"Distributed crack sensors were recently developed with coaxial cables that are composed of inner and outer conductors as well as dielectric layer in between. These sensors were designed based on the change in topology of the cable outer conductor structure under strain effects. Various tests of reinforced concrete (RC) beams and columns indicated that the newly designed sensors are 10~50 times more sensitive than commercial cables to the longitudinal elongation applied on their cable structures. The spatial resolution of the sensors is approximately 50 mm. Limited numerical simulations with the transmission line theory and the finite difference time domain model …

Development Of A Gis-Based Seismic Hazard Screening Tool, Andrew J. Wilding

Masters Theses

"Geotechnical earthquake engineering hazards have consequences that are difficult to mitigate, especially for infrastructure systems with multiple and distributed components. In the last few decades significant progress has been made to provide more accurate and useful methods to evaluate hazards for complex systems. One of these advances involves the application of spatial analysis and geographic information systems (GIS), for not only presenting data as maps, but also providing more practical and usable solutions, such as calculating the hazard potential with spatial distribution. This thesis studies the evaluation of geotechnical earthquake engineering hazards within a GIS environment, using borehole-specific data and …

Behavior Of Full-Scale Rc T-Beams Strengthened In Shear With Externally Bonded Frp Sheets, Antonio Brancaccio

Masters Theses

"Shear deficiencies in many bridges may be considered even more critical than flexural deficiencies since shear failures occur without advance warning and are more catastrophic. Deficiencies in shear can be due to insufficient shear reinforcement, use of outdated design codes, a reduction in the steel area due to corrosion, or an increase in the service load due to change of occupancy for the structure.

In recent years, many research studies have investigated the shear behavior of reinforced concrete (RC) beams strengthened with fiber-reinforced polymer (FRP) composites, however, most of them were conducted on small-scale specimens. Thus, analytical models and design …