Civil Engineering Commons^™

Large-Scale Modeling And Assessments Of Climate, Land Cover, And Sea Level Change Impacts On Stormwater Runoff In Coastal Urban-Natural Environments, Erfanul Huq

Graduate Theses, Dissertations, and Problem Reports (ETD)

This dissertation investigated the potential impacts of changing climate, land cover, and sea level on the future stormwater budget and extreme runoff in coastal urban-natural environments. Two large-scale basins, namely Florida Southeast Coasts Basin (7117 km2) and Saint Johns River Basin (24928 km2), were selected for this study. The basins represented gradients in climate, land cover, and hydrology across the Atlantic coasts of Florida and the southeast U.S. Two mechanistic hydrologic models were developed for the basins using U.S. Environmental Protection Agency (U.S. EPA)’s Storm Water Management Model (SWMM) 5.1. The models were calibrated and validated with observed historical streamflow …

Effect Of Binder Modification And Aggregate Size On Modulus And Fatigue Of Asphalt Concrete, Elizabeth Bashiti

Graduate Theses, Dissertations, and Problem Reports (ETD)

Asphalt concrete is one of the main ingredients used in the paving of roadways across the globe. These roadways have been deteriorating from overuse, under design, and a lack of understanding of the engineering properties. In the asphalt community, it is agreed upon that polymer modifiers and aggregate size have comparable impacts on the performance of a pavement, such as, low creep at high temperatures, high ductility at low temperatures, high toughness, resistance to moisture and temperature, high cohesive and adhesive strength. With all of these advantages, it has been often assumed that polymer modifiers extend/improve the expected life of …

Field Evaluation Of A Modular Press-Brake-Formed Steel Tub Girder In An Application That Includes Skew And Superelevation, Adam D. Roh

Graduate Theses, Dissertations, and Problem Reports (ETD)

The Short Span Steel Bridge Alliance (SSSBA) is a group of bridge and culvert industry leaders (including steel manufacturers, fabricators, service centers, coaters, researchers, and representatives of related associations and government organizations) who have joined together to provide educational information on the design and construction of short span steel bridges in installations up to 140’-0” in length. A technical working group from within the SSSBA developed the notion for the modular shallow press-brake-formed steel tub girder as a solution for the short span steel bridge market.

After extensive testing at West Virginia University and multiple successful field demonstrations, members of …

Study On The Thermal Properties Of Concrete Containing Ground Granulated Blast Furnace Slag, Fly Ash And Steel Reinforcement, Bekir Erdem Bas

Graduate Theses, Dissertations, and Problem Reports (ETD)

In this study, the thermal and mechanical properties of two types of concrete were measured. The first type contained ground granulated blast furnace slag, and the second type contained Class F fly ash. The compressive and splitting tensile strength, static elastic modulus, thermal conductivity, adiabatic temperature rise, shrinkage, and compressive creep of the two concretes were measured. Then, the experimental shrinkage and compressive creep results were compared to ACI 209.2R-08 using the material properties of each mix design. Additionally, two semi-adiabatic designs were made and compared with the adiabatic calorimetry measurements. Also, in this study, the thermal conductivity of concrete …

Evaluation Of Test Specimen Geometry Of Asphalt Mixes Tested With The Asphalt Mixture Performance Tester, Abha Dwivedy

Graduate Theses, Dissertations, and Problem Reports (ETD)

Asphalt concrete, AC, is a heterogeneous material that is modeled as a homogeneous material. The disparity between material structure and theory presents issue with performance testing with test sample geometries, resulting in variability. The purpose of this research is to develop appropriate sample geometry for AMPT test for accurate characterization of asphalt mix and ease of testing.

Four sample geometries were fabricated for three mix types. All specimens are fabricated at 7%0.5% air voids and tested for AMPT tests. The effect of sample geometry was statistically analyzed using laboratory test results and performance predictions using FlexPAVE. For ranking analysis all …

Multi-Objective Optimization Of A Ridesharing System Performance, Mohammad Nasr Azadani

Graduate Theses, Dissertations, and Problem Reports (ETD)

Ridesharing is a shared vehicle service with the potential to meet the growing travel demand due to population increase, economic growth, and shortage in transportation infrastructure capacity. Compared to the current system of predominantly using personal vehicles, ridesharing services reduce the number of vehicles while providing mobility services to the same number of people with no additional investment in the transportation infrastructure. One of the big challenges in implementing ridesharing services is matching drivers and riders. Conflicts between matching-objectives to comply with the interests of diverse stakeholders influence the efficiency of ridesharing in a transportation system. This study investigates the …

Experimental And Field Evaluation Of Frp Pedestrian Bridge Decks, Kalrav Singh Tomer

Graduate Theses, Dissertations, and Problem Reports (ETD)

Traditional materials such as steel, timber, and concrete have continued to dominate their usage in civil infrastructure. They offer great advantages like strength and stiffness but at the same time they pose major issues in terms of durability and maintenance. Fiber reinforced polymer (FRP) exhibits outstanding properties like lightness, excellent corrosion and wear resistance along with superior thermo-mechanical properties. Glass FRPs (GFRPs) have emerged as one of the best alternatives in the field of civil infrastructure. It has been more than four decades since fiber reinforced polymer (FRP) composites have gained notable applications in civil infrastructure industry. However, FRPs have …

Evaluating The Polishing Of Skid Aggregates In Asphalt Using The British Pendulum Tester, Allison Nicole Givens

Graduate Theses, Dissertations, and Problem Reports (ETD)

To ensure the pavements in West Virginia have adequate skid resistance the Division of Highways evaluates and approves skid resistant aggregate sources for all wearing courses on roads with an ADT of 3,000 or greater. Unfortunately, the supply of skid aggregates in West Virginia is depleting quickly. To find a potential alternative to using skid resistant aggregates, laboratory polishing of asphalt samples was performed using a Circular Track Polishing Machine, and friction was tested using a British Pendulum Tester. The experiment was designed to investigate how a specific aggregate type provides skid resistance to a hot asphalt mixture.

The objective …

Procedure For Asphalt Mixture Friction Evaluation For Wvdoh, Danielle Marie Hoyer

Graduate Theses, Dissertations, and Problem Reports (ETD)

Monitoring asphalt skid resistance in the laboratory could aid in improved friction prediction capabilities and provide insight for developing alternative asphalt mixture designs in the future. The West Virginia Department of Highways (WVDOH) sought the design of a laboratory accelerated asphalt polishing machine to further expand on current skid resistance measurement practices. The design is modeled after the North Carolina State University (NCSU) polishing machine detailed in ASTM E660. The purpose of this research was to develop a testing procedure for the polishing equipment. Friction was monitored with the British Pendulum Tester (BPT) according to ASTM E303.

Specimens were prepared …

Review Of Water Allocation Models For West Virginia, Madison Lee Alexis Thompson

Graduate Theses, Dissertations, and Problem Reports (ETD)

Modeling river basins started gaining in popularity and usage in the western part of the United States in large part due to its extreme droughts. Planning is necessary to sustain the population, industries, and recreational water use year-round. Water allocation modeling is a tool used to aid in the issues that come from managing water resources. This work considers the continuous models that synthesized the hydrologic processes that occur and provides a simulation of past, current, or future conditions.

West Virginia, located on the eastern side of the United States, does not have an extreme drought problem as seen in …

Direct Determination Of The Dynamic Elastic Modulus And Poisson's Ratio Of Timoshenko Prisms And Rods, Guadalupe Leon

Graduate Theses, Dissertations, and Problem Reports (ETD)

In this study, the exact solution of the Timoshenko beam vibration frequency equation under free-free boundary conditions was determined with an accurate shear shape factor. The exact solution was compared with a 3-D finite element calculation using ABAQUS program, and the difference between the exact solution and the 3-D FEM was within 0.15% for both the transverse and torsional modes. Furthermore, relationships between the resonance frequencies and Poisson’s ratio were proposed that can directly determine the elastic constants, unlike the equations provided by ASTM C215. The frequency ratio between the 1^st bending mode and the 1^st torsional mode, …

Bending Response Of Timber Mortise And Tenon Joints Reinforced With Filler-Modules And Frp Gussets, Andrew Robert Pacifico

Graduate Theses, Dissertations, and Problem Reports (ETD)

In 2013, the California Bay Area (CBA) passed a set of ordinances to ensure that their 10,000 plus timber soft-story buildings were prepared for seismic events, through nondestructive evaluation methods. Many property owners are searching for an affordable retrofitting system that will also meet CBA’s new laws focusing on installations by the mandated deadlines in 2020. Over the past three to four decades, Fiber Reinforced Polymer (FRP) composites have found their way into the civil infrastructure sector for rehabilitation. The objective of this study is to evaluate the bending behavior retrofitted mortise and tenon timber joints reinforced with engineered wood …

Shear Stress Estimates In The Approach And Bridge Section By Using Various Formula, Jun Seon Lee

Graduate Theses, Dissertations, and Problem Reports (ETD)

Shear stress is the resistance force on top of the contact surface caused by moving flow and is one of the important variable in fluid mechanics. Thus, a lot of researches have been conducted to predict accurate value of shear stress. However, calculating shear stress with existing equations has several limitations because only gradually varied flow and/or uniform flow was considered in their studies. Therefore, direct applying those methods into complex flow type, such as around a bridge, to predict shear stress is questionable.

Thus, laboratory experiments were carried out in a laboratory flume to attack the objective of this …

Numerical Modeling Of Hydraulic Fracture Propagation And Comparison With Microseismic Data At A Field Site, Carter Lawrence Hulcher

Graduate Theses, Dissertations, and Problem Reports (ETD)

A hydraulic fracturing site in Morgantown, West Virginia, USA was selected to be a research site for the Marcellus Shale Energy and Environment Laboratory (MSEEL) project which was funded by the U.S. Department of Energy (DOE). The overall objective of the MSEEL research project is to evaluate and improve technologies to enhance shale gas recovery with minimal impacts on the environment. The field site has two previously drilled wells and two newly drilled wells for extracting natural gas. A separate exploratory well (or “science well”) was also drilled and includes a geophone array to extract important seismic/microseismic event information, which …

Minimizing Trihalomethane Formation Through Source Water Monitoring And Optimizing Treatment Practices, Nashid Mirza

Graduate Theses, Dissertations, and Problem Reports (ETD)

Trihalomethanes, a family of halogenated disinfection byproducts, are prevalent in finished drinking water. According to USEPA’s Disinfectants and Disinfection Byproducts Rules (DBPRs), the regulatory standard of the total trihalomethanes (TTHMs) is 80 μg/L, and water treatment plant operators are required to closely monitor TTHMs in the finished water on a quarterly basis. Although total organic carbon (TOC) has been identified as a precursor for the TTHMs, knowledge gaps still exist in how specific water and treatment related factors (e.g., intake water quality, seasonal variation, contact time, and treatment train) affect TTHMs formation. Focusing on water treatment plants in southwestern Pennsylvania, …

Field Performance And Rating Evaluation Of A Modular Press-Brake-Formed Steel Tub Girder With A Steel Sandwich Plate Deck, Nicole Marie Hegele Underwood

Graduate Theses, Dissertations, and Problem Reports (ETD)

The Short Span Steel Bridge Alliance (SSSBA) is a group of bridge and culvert industry leaders (including steel manufacturers, fabricators, service centers, coaters, researchers, and representatives of related associations and government organizations) who have joined together to provide educational information on the design and construction of short span steel bridges in installations up to 140 feet in length. The SSSBA technical working group has developed a shallow press-brake-formed tub girder, a trapezoidal cold bent girder, to address the demand in the short span steel bridge market for rapid infrastructure replacement solutions.

Following extensive experimental testing and design work at West …

Numerical Analysis And Case Study On The Mitigation Of Mining Damage To The Floor Of No. 5 Coal Seam Of Taiyuan Group By Grouting, A. Li, Y. Liu, L. Mou, K. Li

Faculty & Staff Scholarship

Based on the geological condition of panel 22507 of the no. 5 coal seam at Dongjiahe coal mine, numerical analysis of the stability and water permeability of the floor aquiclude before and after grouting was conducted using Rock Failure Process Analysis (F-RFPA2D). The dynamic development, extension, and distribution of the cracks in the aquiclude are discussed. It is shown that grouting can increase the effective thickness of the aquiclude, reduce the floor damage depth, and control the floor water inrush path, thus effectively improving the overall strength and water blocking capability of the aquiclude. These numerical study results were applied …

Tire-Derived Geo-Cylinders And Polymer Products For Enhancing The Properties Of Base/Sub Base Materials In Pavement Systems, Justin Scott Smith

Graduate Theses, Dissertations, and Problem Reports (ETD)

As a critical part of the transportation network, pavements offer a safe means for vehicular traffic. Pavements are subjected to many forms of stress during their service life, and they are susceptible to environment related cracking and failures. Failures can be attributed to poor subgrade, freeze-thaw variations, and fatigue under repetitive axle loadings. Reinforcement products such as tire-derived geo-cylinders (TDGC) which make-up mechanical concrete and geo-polymers have been utilized in civil engineering practice, and this research aims to understand the potential life of tested pavement system components set at displacement limitations when reinforced with TDGCs and geo-polymers from exposure to …

Remotely Sensed Hydroclimatic Variability For Water Security In An Agricultural Basin, Ashish Kondal

Graduate Theses, Dissertations, and Problem Reports (ETD)

The Indus Basin has supported agricultural practices since the Harappan civilization (3000-1500 BC). Abundance of water has always supported agriculture in the region and built the Indus Basin as one of the major agriculture based economies of the world. The obvious dependency of agriculture on weather and the vagaries of climate emphasizes the necessity of a comprehensive hydro-climate study of the region. The role of climate change in the Indus Basin has always been a contentious issue. Groundwater depletion is evident in the region, and its steady and alarmingly declining rate has brought concerns for the future of agriculture in …

Resilience Modeling Of Surface Transportation System In Mixed Traffic Environment, Shofiq Ahmed

Graduate Theses, Dissertations, and Problem Reports (ETD)

Large-scale natural disasters challenge the resilience of surface transportation system. The objective of this research was to develop a resilience model of surface transportation system in mixed-traffic environment considering varying Connected and Automated Vehicle (CAV) penetration scenarios. As deployment of CAVs are expected to improve traffic operations, a resilience model was developed in this research to evaluate the resilience performance of a transportation system with several CAV penetration levels (0%, 25%, 50%, 75% and 100%) for a given budget and recovery time. The proposed resilience quantification model was applied on a roadway network considering several disaster scenarios. The network capacity …

Roofing Practices And Fall Prevention In The Construction Industry, Hadi A. Shishtar

Graduate Theses, Dissertations, and Problem Reports (ETD)

Roofing is an important profession in the construction industry yet there is a lack of understanding of its safeness. It is generally believed that roofing is an occupation that can be easily practiced by anyone. However, there are many key factors that are associated with roofing, which may impact the lives of roofers who often face major risks at work. According to the Occupational Safety and Health Administration (OSHA), roofing is one of the leading causes of falling deaths among construction workers. The Bureau of labor statistics has reported that roofers are highly exposed to non-fatal injuries. They have also …

The Determination Of The Concrete Tensile Creep At Early Age Using The Ring Test, Tadamon Mohammed

Graduate Theses, Dissertations, and Problem Reports (ETD)

In this study, the modified double power law (MDPL) model is used to determine the tensile creep of concrete at an early age based on the ASTM C1581 restrained shrinkage ring test. Three concrete mixes using Ordinary Portland Cement (OPC) were tested. The three concrete mixes were cast, and each underwent the ring tests up to cracking. Mechanical properties of concrete at the age of 1, 3, 7, 14, and 28 days were tested to find the compressive strength, tensile strength and Young’s Modulus of concrete. The strength tests results were obtained from both 4x8 inch and 6x12 inch cylinders. …

Detection Of Buried Non-Metallic (Plastic And Frp Composite) Pipes Using Gpr And Irt, Jonas Kavi

Graduate Theses, Dissertations, and Problem Reports (ETD)

This research investigated alternative strategies for making buried non-metallic pipes (CFRP, GFRP, and PVC) easily locatable using Ground Penetrating Radar (GPR). Pipe diameters up to 12" and buried with up to 4 ft. of soil cover were investigated. The findings of this study will help address the detection problem of non-metallic pipelines and speed the adoption of composite pipes by the petroleum and natural gas industry. The research also investigated the possibility of locating buried pipes transporting hot fluids using Infrared Thermography (IRT).

Results from the study have shown that, using carbon fabric and aluminum tape overlay on non‑metallic pipes …

Geotechnical Laboratory Testing For 2-D Fem Analysis Of Geomorphic And Planar Sloped Caps And Covers For Sustainable Mine Refuse Deposition, Sun Hee Park

Graduate Theses, Dissertations, and Problem Reports (ETD)

This thesis reports the findings of the application of Geomorphic Landform Design principles to the Royal Scot abandoned coarse coal refuse (CCR) pile located in Greenbrier County, West Virginia. The Royal Scot facility has many environmental concerns including severe erosion, acid-mine/rock drainage, and sediment transport. A cap and cover system is proposed to be implemented which incorporates the GLD principles. A two-layer cap and cover system will be used to reclaim the site and return it back to a stable state and reduce the production of acid-mine drainage. The system is composed of a hydraulic barrier composed of compacted CCR, …

Lateral Torsional Buckling Response In Glass Fiber Reinforced Polymer Composite Beams And Comparison With Ansys Modeling & Design Equations, Santosh Vangala

Graduate Theses, Dissertations, and Problem Reports (ETD)

Glass fiber reinforced polymer (GFRP) composites have the potential to replace the existing conventional materials in Civil Engineering like steel and concrete. Such potential can be attributed to the numerous advantages GFRP composites have over conventional materials. Some of the advantages are: high strength-to-weight ratio, corrosion resistance, low life cycle cost and maintenance, nonmagnetic and electronic transparency. As the application of GFRP is on the rise, the need for developing accurate design equations for these materials has been imperative. The GFRP composites are manufactured through pultrusion and although they have numerous advantages they are less stiff than similar profiles made …