Civil Engineering Commons^™

Implementation Of A Novel Inertial Mass System And Comparison To Existing Mass-Rig Systems For Shake Table Experiments, Alvaro Lopez, Peter Dusicka

Civil and Environmental Engineering Faculty Publications and Presentations

Shake table testing is one of the more effective experimental approaches used to study and evaluate seismic performance of structures. Reduced-scale models can still result in large-scale specimens where incorporating the required inertial mass effectively and safely can be challenging. This study proposes a new system of arranging the mass in the experiments that combines the realism of mass participation during earthquake excitation when supported by the shake table with laboratory practicality considerations of the mass positioned off the specimen. The characteristics and dynamic motion equations for the proposed system are described and applied to shake table experiments involving large-scale …

Numerical Simulation Of Continuous Cone Penetration And Interpretation Of Cptu Dissipation Tests, Andrew Phillip Eugene Huffman

Dissertations and Theses

The piezocone penetration test (CPTu) is a commonly used method of geotechnical site investigation. The CPTu is especially useful because it provides a nearly continuous data profile of in-situ soil behavior, which can be correlated to useful engineering parameters. However, limitations exist for interpretation of geotechnical properties from CPTu data and for numerical analysis of cone penetration problems. The research presented in this thesis examines interpretation of coefficient of consolidation from CPTu dissipation test data and implementation of an algorithm to advance numerical simulation of cone penetration problems. This thesis presents analysis of CPTu dissipation responses from field-measured and numerically …

High-Temperature Performance Of Ambient-Cured Alkali- Activated Binder Concrete, Kruthi Kiran Ramagiri, Darshan Chauhan, Shashank Gupta, Arkamitra Kar, Dibyendu Adak, Abhijit Mukherjee

Civil and Environmental Engineering Faculty Publications and Presentations

Owing to their lower carbon footprint and efficient performance compared to portland cement (PC), alkali-activated binders (AAB) show promising potential as an alternative to PC. The present paper investigates the high-temperature performance of AAB concrete through compressive and bond strength tests. Four different AAB concrete mixes with varying proportions of fly ash: slag (100:0, 70:30, 60:40, and 50:50) cured under ambient conditions are exposed to elevated temperatures. The mechanical performance of AAB concrete is corroborated with microstructural changes. The results show that AAB concrete with fly ash: slag ratio of 70:30 exhibits the best mechanical performance after exposure to elevated …

Use Of Carbon Fiber Reinforced Polymer (Cfrp) Including Sheets, Rods, And Ropes In Strengthening And Repairing Long Reinforced Concrete Columns, Yasir Matloob Saeed

Dissertations and Theses

The use of FRP materials in strengthening and repairing of reinforced concrete (RC) structures has increased in the past two decades. Recently, FRP materials have become one of the most used materials in rehabilitation engineering. For seismic retrofitting of RC structures, usually the process involves strengthening or repairing the vertical support elements of the buildings or bridges. Several studies focused on the use of FRP materials in strengthening and repairing RC columns. Externally bonded (EB) FRP sheets or laminates and near-surface-mounted (NSM) FRP rods have been used for enhancing the strength and ductility of RC columns. Although glass FRP (GFRP) …

The Seasonal Effects Of Photovoltaic Cells On Sedum Eco Roof Substrate Moisture, Brook M. Thompson

University Honors Theses

This paper investigates a combined PV eco roof system and analyzes the soil moisture levels in front of the panels and directly underneath the PV Cells on an experimental ecoroof platform in Portland, Oregon. The purpose of the study was to examine how PV Cells create differences in the moisture level of the soil on the ecoroof. Four moisture sensors were set in different quadrants in four experimental testbeds, and the moisture level data was recorded from October 18^th, 2018 to September 10^th, 2019. The study found that in with heavy rainfall, the front of the …

Ultrasonic Coda Wave Comparison For Quality Control Of Manufactured Parts: Proof Of Feasibility, Alexei Marin-Cortes

Civil and Environmental Engineering Master's Project Reports

Manufactured parts are a staple of modern urban life, visible in homes (e.g., kitchen appliances), offices (e.g., printers), the automobile and aerospace industries (e.g., body parts), and more. This M.S. project intended to determine whether ultrasonic testing could be used in a simple and rapid manner to perform quality control of manufactured parts. Ultrasonic testing is employed for this purpose using two surface-coupled transducers, one being a transmitter and the other one a receiver. An ultrasonic pulse, which is generated by the transmitting transducer, propagates through the part, collecting information about material and geometry, as well as potential unwanted features. …

Dynamic Response Of Highway Bridge Superstructures Subjected To Wave Action: Experimental Analysis And Numerical Modeling, Alaa Waleed Hameed

Dissertations and Theses

Bridges are critical lifeline components of the infrastructure network, enabling economies to function under normal conditions and disaster response and recovery missions to take place after extreme events. Therefore, ensuring satisfactory performance increases community resilience and minimizes both human and economic losses. Coastal bridges, which are the focus of this PhD dissertation, are vulnerable to coastal storms. High failure rates of these bridges during two major hurricane events in the mid-2000s have spurred research activities to better understand the wave-induced forces of coastal bridges.

This PhD research represents a continuation effort to build, implement, and introduce new fundamental concepts and …

Sea Level, Tidal, And River Flow Trends In The Lower Columbia River Estuary, 1853-Present, Stefan Talke, Andrew Mahedy, David A. Jay, Patrick Lau, Conrad Hilley, Amanda Hudson

Civil and Environmental Engineering Faculty Publications and Presentations

Few tidal records are available pre-1900 for the Pacific Ocean. We improve data coverage by recovering historical tabulations and digitizing analog tide rolls from Astoria, Oregon for 1853-1876. Nearly 13,500 overlapping images of tides from 1855-1870 were digitized at a 6 minute resolution using a line-finding algorithm. Available hourly and high/low tabulations were also digitized, as were nearby hourly records from 1933-1943. Uncertainty was assessed by evaluating manual staff measurements, historical documents, and leveling surveys. Results suggest that uncertainty in mean sea level varies from ± 0.07m (early 1850s) to ± 0.03m (1867-1876) and is driven primarily by datum and …

Robust Maximum Flow Network Interdiction Problem, Darshan Rajesh Chauhan

Dissertations and Theses

In this thesis, a maximum flow-based network interdiction problem considering uncertainties in arc capacities and interdiction resource consumption is solved. The problem consists of two entities with opposing objectives: the goal of the adversary is to maximize the flow of illicit drugs through the network, while the goal of the interdictor is to minimize the maximum flow by completely interdicting arcs given a specified amount of resources. Lack of complete information about the usage patterns of the transportation network by the adversary results in an uncertain estimate of arc capacity and resources required for interdiction by the interdictor. To account …

Nineteenth-Century Tides In The Gulf Of Maine And Implications For Secular Trends, Richard D. Ray, Stefan A. Talke

Civil and Environmental Engineering Faculty Publications and Presentations

Since the early twentieth century, the amplitudes of tidal constituents in the Gulf of Maine and Bay of Fundy display clear secular trends that are among the largest anywhere observed for a regional body of water. The M2 amplitude at Eastport, Maine, increased at a rate of 14.1 ± 1.2 cm per century until it temporarily dropped during 1980–1990, apparently in response to changes in the wider North Atlantic. Annual tidal analyses indicate M2 reached an all‐time high amplitude last year (2018). Here we report new estimates of tides derived from nineteenth century water‐level measurements found in the U.S. National …

Concrete Bridge Deck Performance Data And Metrics For The State Of Oregon, Jael Wettach-Glosser

Dissertations and Theses

Bridge decks are a critical element of a bridge that support and distribute vehicle loads to the superstructure. Because of the requirements of this role, bridge decks are exposed to severe conditions that typically lead to structural deficiency in bridges which is both costly and disruptive. Therefore, to keep bridges and highways in good repair, developing optimal preservation decisions for concrete bridge decks is key. In order to develop effective performance monitoring and preservation schedules, the parameters affecting bridge deck deterioration need to be better understood.

With guidance from the literature and Oregon Department of Transportation (ODOT) personnel, two datasets …

Historical Changes In Lower Columbia River And Estuary Floods: A Numerical Study, Lumas Helaire, Stefan Talke, David A. Jay, Andrew Mahedy

Civil and Environmental Engineering Faculty Publications and Presentations

Over the past 150 years, the Lower Columbia River Estuary controlling depth has approximately doubled, the majority of historical wetlands and floodplain have been reclaimed, numerous infrastructure projects have altered and confined flow pathways, and significant natural and anthropogenic changes to the discharge hydrograph have occurred. To investigate the effect of these changes on tides, river slope, and flood water levels, we construct and validate numerical models that simulate flow over late nineteenth‐century and present‐day bathymetry. The models are validated using archival (1853–1877) and modern tide measurements throughout the Lower Columbia River Estuary and river stage measurements from the tidal …

Evaluation Of Low And High Frequency Dynamic Response For Condition Assessment Of Reinforced Concrete Structures, Ali Hafiz

Dissertations and Theses

Concrete is widely used for civil infrastructure structures and they experience deterioration and degradation due to aging, increases in the traffic loads, harsher environmental conditions, use of deicing chemicals, etc. Therefore, evaluating the integrity of reinforced concrete structures has become of increasing interest for infrastructure owners and managers. A number of non-destructive testing (NDT) and structural health monitoring (SHM) methods have been developed in recent decades to aid in evaluating structures and provide input for asset management. One family of these methods uses the dynamic response of a structural member: stress waves (high frequency) and structural vibrations (low frequency). Both …

Test Setup Design And Cyclic Evaluation Of Rocking Clt Wall And Floor Restoring Force Lateral System, Aaron Davis Smith

Civil and Environmental Engineering Master's Project Reports

The introduction of the demand for mass timber buildings in areas with seismic hazards has called for new lateral systems. Lateral systems in mass timber building typically utilize a rocking shear wall with post-tensioned rods to provide system re-centering. These post-tensioned rods add axial load to the shear wall and potentially endure long term creep affects. Mass Timber buildings consist of cross laminated (clt) shear walls and floor slabs along with glulam beams. The flexural capacity of the CLT floor slabs along with dead load can provide an alternative source for the restoring force. This project developed a test setup …

The Quest For Model Uncertainty Quantification: A Hybrid Ensemble And Variational Data Assimilation Framework, Peyman Abbaszadeh, Hamid Moradkhani, Dacian Daescu

Civil and Environmental Engineering Faculty Publications and Presentations

This article presents a novel approach to couple a deterministic four‐dimensional variational (4DVAR) assimilation method with the particle filter (PF) ensemble data assimilation system, to produce a robust approach for dual‐state‐parameter estimation. In our proposed method, the Hybrid Ensemble and Variational Data Assimilation framework for Environmental systems (HEAVEN), we characterize the model structural uncertainty in addition to model parameter and input uncertainties. The sequential PF is formulated within the 4DVAR system to design a computationally efficient feedback mechanism throughout the assimilation period. In this framework, the 4DVAR optimization produces the maximum a posteriori estimate of state variables at the beginning …

Seismic Behavior Of Screen Grid Core Insulated Concrete Form Walls, Anwer Sabah Mohammed Mohammed

Dissertations and Theses

The use of the insulated concrete form (ICF) walls in residential buildings has increased over the past few decades. Much research has been conducted to evaluate the lateral strength of these walls by applying monotonic and cyclic loadings. In the current study, full-scale shake table experiments were employed to evaluate the in-plane behavior of four screen grid insulated concrete form (SGICF) walls. The first two wall specimens utilized dry fit insulated form blocks made from recycled expanded polystyrene granules that were bonded together with cement. When stacked, the cavities in the blocks formed a grid of cores that are evenly …

The Influence Of Shared Mobility And Transportation Policies On Vehicle Ownership, Edgar Bertini Ruas

PSU Transportation Seminars

With the emergence of several new providers of shared mobility services, such as Uber, Biketown and Car2go, there has been the promise of changes to the traditional way of owning and using a vehicle. One potential consequence of the new mobility services is the reduction in vehicle ownership. At the same time, cities are trying to anticipate these changes by reducing the amount of space dedicated to parking. This thesis aims to asses the extent to which new shared mobility and transportation policy strategies (especially parking requirements and transit pass availability) relate to vehicle ownership among residents of multifamily dwellings. …

Webinar: Segmenting The Market For Transportation Demand Management Campaigns, Philip L. Winters, Amy Lester

TREC Webinar Series

Social marketing seeks to develop and integrate marketing concepts with other approaches to influence behaviors that benefit individuals and communities for the greater social good. It is a useful transportation demand management (TDM) planning approach to promote travel behavior change. The purpose of this study was to explore a consumer market segmentation technique successfully used in Europe for its applicability to marketing efforts in the United States. Attitudinal and demographic data were collected from 1900 individuals in Florida, Oregon, and Virginia modeled after the European approach. Clustering analysis was applied to divide the sample into segments so that members of …

Scenarios For Adoption Of Autonomous Vehicle Technologies In Freight, Sabya Mishra

PSU Transportation Seminars

Innovation adoption research has largely ignored organizational adoption, and little work has been done to understand or predict the adoption of innovations by freight organizations. Among the existing innovation adoption theoretical and methodological approaches this seminar will explore which are most appropriate methods for freight organizational adoption. The seminar will present a disaggregate market penetration model for freight transportation organizations adopting connected autonomous vehicle (CAV) technology and demonstrate an application using a case study area in Memphis, TN. The seminar will highlight ongoing and future organizational adoption research for CAVs, and other innovations.

Driver Comprehension Of Permissive Right-Turns With A Flashing Yellow Arrow (Fya), Christopher Monsere, David Hurwitz

PSU Transportation Seminars

This research explored driver comprehension and behaviors with respect to right-turn signal displays with a focus on the Flashing Yellow Arrow (FYA) in a driving simulator and a comprehension survey. Flashing yellow arrows are used in place of other turn signals, such as solid green or flashing yellow or red circles, to indicate that drivers may turn after yielding to oncoming traffic. These turns are considered “permissive.” Turns where no conflicting traffic is present, such as those indicated with a green arrow, are “protected” turns. The flashing yellow arrow’s inclusion in the 2009 Manual on Uniform Traffic Control Devices sped …

Unobserved Heterogeneity And Spatial Correlation: Statistical And Econometric Analyses Of Heavy-Vehicle Hard Braking And Crash Frequency, Jason Anderson

PSU Transportation Seminars

In heavy-vehicles (a truck with a gross vehicle weight rating of greater than 10,000 pounds), a hard braking event is described as an event that prompts the vehicle’s “black box” to record an abrupt change in speed. More specifically, this occurs when the driver applies excess force to the vehicle’s brake. These hard braking events can then serve as a proxy for several factors, such as economic impacts, environmental impacts, and impacts on safety. In the context of the present study, being that approximately one-third of all heavy-vehicle-caused crashes in 2014 were attributed to faulty brakes, there is a need …

Modeling The Impact Of Traffic Conditions And Bicycle Facilities On Cyclists' On-Road Stress Levels, Àlvaro Caviedes, Miguel A. Figliozzi

Civil and Environmental Engineering Faculty Publications and Presentations

Past research efforts have shown that cyclists’ safety, stress, and comfort levels greatly affect the routes chosen by cyclists and cycling frequency. Some researchers have tried to categorize cyclists’ levels of traffic stress utilizing data that can be directly measured in the field, such as the number of motorized travel lanes, motorized vehicle travel speeds, and type of bicycle infrastructure. This research effort presents a novel approach: real-world, on-road measurements of physiological stress as cyclists travel across different types of bicycle facilities at peak and off-peak traffic times. By matching videos with stressful events, it was possible to observe the …

Reducing Exposures Traffic-Related Air Pollution And Urban Building Design, Elliott T. Gall, Linda George

Mechanical and Materials Engineering Faculty Publications and Presentations

No abstract provided.

Advancing Bridge Technology, Task 10: Statistical Analysis And Modeling Of Us Concrete Highway Bridge Deck Performance -- Internal Final Report, Omar Ghonima, Thomas Schumacher, Avinash Unnikrishnan, Adam Fleischhacker

Civil and Environmental Engineering Faculty Publications and Presentations

Concrete highway bridge deck repairs represent the highest expense associated with bridge maintenance cost. In order to optimize such activities and use the available monies effectively, a solid understanding of the parameters that affect the performance of concrete bridge decks is critical. The National Bridge Inventory (NBI), perhaps the single-most comprehensive source of bridge information, gathers data on more than 600,000 bridges in all fifty states, the District of Columbia, and the Commonwealth of Puerto Rico. Focusing on concrete highway bridge deck performance, this research developed a nationwide database based on NBI data and other critical parameters that were computed …

Lateral Deformation Behavior Of Mass Timber Beam To Column Gravity Connection, Tyler James Williams

Civil and Environmental Engineering Master's Project Reports

A beam-to-column connection consisting of glulam beam and column and cross laminated timber floor slab was developed and experimentally evaluated for use in buildings that are expected to undergo earthquake-­­induced lateral drift. The connection utilized a passive gap closure mechanism designed to allow beam rotations during lateral drift while minimizing residual separation between the beam and the column following an earthquake. Full scale cyclic experiments were used to validate the connection’s minimal rotational stiffness and demonstrate low damage performance for lateral drifts exceeding 4.5% drift. The connection exhibited no degradation in gravity load capacity throughout the imposed lateral deformations. An …

A 3d Model For Earthquake-Induced Liquefaction Triggering And Post-Liquefaction Response, Arash Khosravifar, Ahmed Elgamal, Jinchi Lu, John Li

Civil and Environmental Engineering Faculty Publications and Presentations

A constitutive soil model that was originally developed to model liquefaction and cyclic mobility has been updated to comply with the established guidelines on the dependence of liquefaction triggering to the number of loading cycles, effective overburden stress (Kσ), and static shear stress (Kα). The model has been improved with new flow rules to better capture contraction and dilation in sands and has been implemented as PDMY03 in different computational platforms such as OpenSees finite-element, and FLAC and FLAC3D finite-difference frameworks. This paper presents the new modified framework of analysis and describes a guideline to calibrate the input parameters of …

Exploring The Determinants Of Vulnerable Road Users’ Crash Severity In State Roads, Álvaro Caviedes

PSU Transportation Seminars

Part of the Student Presentations from TRB

Pedestrians and bicyclists are the most vulnerable road users and suffer the most severe consequences when crashes take place. An extensive literature is available for crash severity in terms of driver safety, but fewer studies have explored non-motorized users’ crash severity. Furthermore, most research efforts have examined pedestrian and bicyclist crash severity in urban areas. This study focuses on state roads (mostly outside major urban areas) and aims to identify contributing risk factors of fatal and severe crashes involving pedestrians and bicyclists in state roads. The results seem to suggest that besides improvements …

Inertial And Liquefaction-Induced Kinematic Demands On A Pile-Supported Wharf: Physical Modeling, Milad Souri, Arash Khosravifar, Stephen E. Dickenson, Scott Schlechter, Nason Mccullough

Civil and Environmental Engineering Faculty Publications and Presentations

Results of a centrifuge test on a pile-supported wharf were used to investigate the time-, depth-, and row-dependent nature of kinematic and inertial loading on wharf piles in sloping rockfill. P-y models were calibrated against recorded bending moments in different piles and different depths. It was found that full kinematic demands and full superstructure inertia should be combined to estimate bending moments at pile head and shallow depths (less than 10 diameters below the ground surface). On the contrary, it was found that applying full kinematic demands alone was adequate to estimate pile bending moments at large depths (greater than …

The Effects Of Long-Duration Subduction Earthquakes On Inelastic Behavior Of Bridge Pile Foundations Subjected To Liquefaction-Induced Lateral Spreading, Jonathan Nasr, Arash Khosravifar

Civil and Environmental Engineering Faculty Publications and Presentations

Effective-stress nonlinear dynamic analyses (NDA) were performed for a large-diameter reinforced concrete (RC) pile in multi-layered liquefiable sloped ground. The objective was to assess the effects of earthquake duration on the combination of inertia and liquefaction-induced lateral spreading. A parametric study was performed using input motions from subduction and crustal earthquakes covering a wide range of motion durations. The NDA results showed that the pile head displacements increased under liquefied conditions, compared to nonliquefied conditions, due to liquefaction-induced lateral spreading. The NDA results were used to develop a displacement-based equivalent static analysis (ESA) method that combines inertial and lateral spreading …

Modified Design Procedures For Bridge Pile Foundations Subjected To Liquefaction-Induced Lateral Spreading, Arash Khosravifar, Jonathan Nasr

Civil and Environmental Engineering Faculty Publications and Presentations

Effective-stress nonlinear dynamic analyses (NDA) were performed for piles in the liquefiable sloped ground to assess how inertia and liquefaction-induced lateral spreading combine in long- and short-duration motions. A parametric study was performed using input motions from subduction and crustal earthquakes covering a wide range of durations and amplitudes. The NDA results showed that the pile demands increased due to (a) longer duration shakings, and (b) liquefaction-induced lateral spreading compared to nonliquefied conditions. The NDA results were used to evaluate the accuracy of the equivalent static analysis (ESA) recommended by Caltrans/ODOT for estimating pile demands. Finally, the NDA results were …