Civil Engineering Commons^™

Non-Linear Evaluation Of Concrete-Filled Steel Tubular Columns, Mohammad Hassan Shams

Dissertations

Concrete-filled steel tubular (CFT) columns have become increasingly popular in structural applications due to their high strength, high ductility, and large energy absorption capacity. These structural properties are the result of integral behavior of the concrete core and the steel tube. This research provides an analysis of the interaction of the concrete core and the steel tube in CFT columns.

While there have been many experimental studies of CFT columns, there has been no analytical work modeling the confining effect of the steel tube on the concrete core. Furthermore, current design procedures tend to underestimate the ultimate strengths of CFTs …

Potential Effects Of Pneumatic Fracturing On Existing Structures And Utilities, Michael C. Canino

Theses

This thesis develops a mathematical design model for predicting ground deformations resulting from pneumatic fracturing. Pneumatic fracturing is a patented process developed for the purpose of enhancing the in situ treatment and removal of hazardous contaminants from geologic formations. During pneumatic injections, measurable ground deformations are experienced both during and after the process. Safe application of pneumatic fracturing to contaminated plumes occurring beneath existing structures and utilities requires that the elastic deformation behavior of the geologic formation and overlying structures be quantified.

Data from five pneumatic fracturing sites were regressed to establish the characteristic polynomial describing the curvature of ground …

Fracture Mechanics Of High Strength Concrete Members, Rajendra K. Navalurkar

Dissertations

This study investigates the behavior of High Strength Concrete (HSC) under uniaxial state of stresses. Emphasis is placed on experimental evaluation of important mechanical and fracture properties. Owing to high brittleness of HSC, experimental results especially on tensile behavior have been largely limited and scarce. In this research, direct uniaxial tension tests are employed for determination of the post-peak tensile softening characteristics of HSC. The softening characteristics of high strength concrete is found to be considerably different than that of normal strength concrete (NSC). Fracture energies evaluated form the descending branch of the stress softening reveal significant drop in the …

Relationship Between Precipitation, Surface Runoff, And Shallow Water-Table, Manoj Patel

Theses

In this study, a model was developed to describe the relationship between precipitation, surface runoff, and shallow groundwater table in a watershed that is subjected to groundwater extraction and urbanization. Regression analysis of fourteen years (1976-1989) of time series data for precipitation, stream discharge, ground water elevation, and groundwater extraction yielded good correlation between these parameters.

Analysis of the data associated with groundwater recharge and discharge events that occurred in the watershed from 1976 to 1989 yielded a high correlation between the above cited parameters. Regression analysis utilized to predict monthly variations in groundwater elevations showed a fair correlation between …

The Constant Fracture Angle Model For Cementitious Materials, Suk Ki Kim

Dissertations

Fracture mechanics of concrete has been investigated for the past two decades using linear elastic and nonlinear fracture mechanics concepts. The models proposed so far remain questionable largely due to specimen dependency of the proposed fracture parameters.

In this study, a new approach for modeling the fracture characteristics of concrete and fiber reinforced concrete is proposed. The model depends on the load CMOD relationship rather than the traditional load-deflection principle. Although energy consumed during fracture is definitely a direct function of the load displacement response, it was observed that traditional displacement measurement included an extraneous and erratic portion due to …

Development Of A Multivariate Qsar Model To Predict Desorption Of Halogenated Aliphatic Hydrocarbons From Activated Sludge Solids, Sudhi Ranjan Mukherjee

Dissertations

Data collected from different wastewater treatment processes have provided statistically significant evidence that many toxic organic contaminants on EPA's list of priority pollutants concentrate several orders of magnitude greater than influent concentrations in industrial and municipal wastewater sludges. Because of the reversibility of sorption processes, it is possible for sorbed organic compounds to desorb at a later time, hence making disposal of these sludges a potential problem. Although a number of models have been developed to predict sorption parameters, they have all been based on empirically derived descriptors whose validity is seriously compromised by the variation in available data for …

Discrete Element Modeling Of Dry Granular Material Using A Massively Parallel Supercomputer, David W. Washington

Dissertations

It is the state-of -the-art within Geotechnical Engineering to model soils as systems of particles rather than using the traditional continuum approach. Simulating these systems of particles for geotechnical boundary value problems results in systems which are of necessity large, motivating the application of massively parallel supercomputers. This thesis pursues such an approach.

The following work describes numerical experiments using a Discrete Element Method (DEM) paradigm for soils (Trubal) together with massively parallel computers with Single Instruction Multiple Data (SIMD) architecture. The discrete element method describes the behavior of granular assemblies using the classical mechanics of discrete bodies. The computational …

Development Of A Fiber Optic Polarimetric Sensor For Concrete, Insang Lee

Theses

Development of a fiber optic sensor for embedment in cementitious composites and measurement of displacements associated with the opening of microcracks is described. The sensor can be employed as a transducer for measurement of crack tip opening displacements during fracture tests. A polarization maintaining fiber is used as the sensing element, and transduction mechanism is similar to those of other polarimetric type based sensors. However, the deformation resolving power of the sensor is increased by way of increasing the effective length of the optical fiber. This is done by winding the optical fiber into a coil. A direct relationship between …

Anaerobic Digestion And Acid Hydrolysis Of Nitrocellulose, Fong-Jung Tai

Dissertations

In this investigation, studies were conducted to evaluate the biodegradation of nitrocellulose in anaerobic batch reactors with and without the supplemental carbon inducers, such as cellulose, cellobiose, and lactose. Results from the anaerobic study show that degradation of nitrocellulose alone is difficult and that nitrocellulose degradative enzymes could be induced by the three inducers tested. As high as 48.91% conversion could be obtained at Cellulose/Nitrocellulose ratio of 1 to I. Studies also indicated that type 20 and 50 celluloses would be more effective and optimum pH was about 6.4 in biodegradation of nitrocellulose. Three testing systems, namely, single-stage, two-stage, and …

Nondestructive Dynamic Load Testing Of Bridges Using Strain Sensors, Suzanne Boland

Theses

This thesis investigates the use of nondestructive bridge load testing utilizing strain sensing equipment. Nondestructive bridge load testing has not been used extensively due to lack of expertise and perceived high cost. It can, however, play a key role when an existing bridge needs to be evaluated. Since most evaluation techniques tend to be conservative, the results from such an evaluation may not represent the real properties of the structural members. The true properties of an existing bridge can be identified using the results from nondestructive static and dynamic load testing. The procedures used to identify a structure with the …

A Theoretical Analysis Of Volatile Contaminant Removal By The Pneumatic Fracturing Process, Yuan Ding

Dissertations

A mathematical model that simulates the process of contaminant removal from a pneumatically induced fracture within a porous medium is presented. It includes: (1) model development; (2) parameter evaluation; (3) statistical sensitivity analysis; and (4) model validation.

Based on the dual porosity approach, a mathematical model for a fractured porous formation is developed for both two dimensional and axial symmetrical cases. This model constitutes a pair of coupled partial differential equations for the porous medium and discrete fracture, respectively. The initial and boundary conditions have been determined based on field considerations of a soil vapor extraction system. By means of …

Shear Strength And Fatigue Crack Propagation In Concrete By Energy Method, Wei Wang

Dissertations

The limit analysis methods have been commonly used to predict the ultimate flexure strength of reinforced concrete members over 50 years. However, current design formulas for shear in structural concrete are mostly empirical. In part one of this dissertation, attempts are made to apply the theory of plasticity to predict the shear strengths of reinforced concrete structures.

The modified Coulomb-Mohr failure criterion is used as the constitutive law of concrete, and the plastic flow is assumed to be associated with this failure criterion. A generalized formulation for energy dissipation in accordance with the failure criterion and associated flow rule is …

A Nondestructive Method For The Determination Of Fracture Energy In Concrete Structures, Been-Jyh Yu

Dissertations

It is generally believed that linear elastic fracture mechanics concepts can not be employed in determining fracture parameters in concrete, and therefore most of the current research effort has focused on applying the principles in yielding fracture mechanics. Despite all these efforts, comparison of results reported by many investigators indicate wide variations in fracture toughness values even for essentially similar materials. The main source of discrepancy in the observed results is the existence of a large process zone at the crack tip. Hence, the amount of energy consumed in advancing the crack will depend on the size of the process …

Composite Beam Analogy Fracture Model (Cbafm) : A Non-Linear Fracture Mechanics Model For Concrete, Mohammed Enamul Haque

Dissertations

The main objective of this dissertation is to develop a simple non-linear fracture mechanics model for the determination of fracture mechanics parameters for concrete, such as fracture process zone length (rp), critical fracture energy release rate (Gic), critical stress intensity factor (KO and fracture energy (GF). The fracture process zone (FPZ) is modeled as a damaged non-elastic cohesive band where the extent of damage due to microcracking varies from no damage at the boundary of FPZ to complete crack surface separation at the notch or macro-crack tip. The proposed method can predict theoretically both the pre-peak and post-peak load versus …

Fundamentals Of Adhesion Of Organic Compounds And Aqueous Cleaning Of Glass And Metal Surfaces : Applications In The Pharmaceutical And Chemical Industries, Michel J. De Ruijter

Theses

In this thesis we studied the physics and chemistry of the adhesion of various classes of organic compounds to glass and stainless steel surfaces, by using diagnostic aqueous cleaning solutions and other techniques. We defined the thermodynamic requirements for aqueous cleaning based on extensive experimental and theoretical work. Novel cleaning diagrams are introduced, based on electrostatic interactions between organic compounds and solid surfaces, to facilitate the design of aqueous cleaning systems. We studied the mass transfer parameters for selected situations. The electrochemical Pourbaix-diagrams were used to explain the effect of hydrogen peroxide added to aqueous solutions and to avoid corrosion …

Micromechanics Of Hot Mix Asphalt Material Formulation And Numerical Simulation, Kuo-Neng G. Chang

Dissertations

Hot Mix Asphalt (HMA), a highway and airfield pavement material, is heterogeneous, granular, and composite. It is traditionally modeled as a homogeneous material using continuum mechanics or semi-empirical methods. As a result, the above models either neglect or over-simply component reactions, failing to predict field performance problems resulting from particle segregation. This research presents micromechanical modeling, a novel approach that accounts for the components.

A micromechanical model is developed for HMA by modeling it as an assembly of asphalt cement coated particles. The asphalt cement is modeled as a viscoelastic material. To represent asphalt cement, several viscoelastic elements (i.e. Maxwell, …

Analysis Of Plates And Reinforced Concrete Columns By Cubic B-Spline Function, Gang Wang

Dissertations

Applying spline functions to numerical structural analysis has been more common in recent years. The recent increase use of spline functions is mainly due to their excellent characteristics, such as sectionalized continuity, linear combination, flexibility, and easy use for various boundary conditions. The whole deformed shape of some structures or substructures can be described with one displacement function constructed by a series of spline functions. By doing this, the mesh generation and the huge computer memory space are no longer needed because only one single superelement can be used in the whole process. The choice of spline functions as displacement …

Stress-Strain Behavior Of High Strength Concrete Cylinders, Danqing Chen

Theses

Due to the recent development of high strength concrete in engineering and construction, it has become more important to study the behavior of materials in structures.

No results have been previously published in the literature regarding the influence of aspect ratio in plain high strength concrete cylinders on stress-strain behavior under uniaxial compression.Thus at present study, compression tests were conducted on 3x6 in., 3x9 in., and 3x12 in. plain high strength concrete cylinders to study their stress-strain behavior. Plain normal strength concrete cylinders were also tested and used for comparative study.

Based on the present investigations, attempting to obtain a …

Mechanical Behavior Of Polystyrene Foam Bead Lightweight Concrete, Hai-Ying Ni

Theses

This thesis is designed to investigate the effect of porosity on the mechanical properties (strength and modulus) of concrete, and to evaluate the effect of silica fume on the mechanical properties of the polystyrene foam bead lightweight concrete. In this research we made the lightweight concrete by using polystyrene foam beads as light weight aggregate and studied its mechanical properties in detail. Due to the near zero density and modulus of foam beads, we were able to consider it as "porosity". We could then control porosity in concrete by varying foam bead volume fraction.

In our experiments we used the …

The Influence Of Hydrodynamics And Particle Size On The Rejection Properties Of Ultrafiltration Membranes, Usama M. Shahin

Theses

A mathematical model based on the flow hydrodynamics is developed to calculate the treatment efficiency of ultrafiltration process. This model relates the treatment efficiency with the consideration of both fixed parameters and variable parameters. The fixed parameters are function of the intrinsic rejection coefficient, diffusion coefficient, and viscosity whereas the variable parameters can be related to the fluid velocity, volume flux, and cartridge dimensions. The model has been examined by solutions with solutes that have different molecular weights. The experimental data fits the proposed mathematical model very closely suggesting its suitability to evaluate the rejection efficiency in ultrafiltration. As such …

Behavior Of Concrete And Slender Reinforced Concrete Columns Under Cyclic Axial Compression With Bidirectional Eccentricities, Byong Youl Bahn

Dissertations

A rational analysis of reinforced concrete (R/C) structures requires satisfactory modeling of the behavior of concrete under general loading patterns. The behavioral characteristics of concrete dominantly depends upon its load history. For the study of concrete behavior, parametric study and experimental investigation into the behavior of concrete under load history of random cycles are performed. Through parametric study, the applicability of the previous concrete models is examined and a physically motivated modeling for the cyclic stress-strain relationships is proposed. The present modeling of concrete under general cyclic loading is initiated to provide substantial applicability, flexibility of mathematical expressions and furthermore …

Theoretical Evaluation Of The Break Off Test For Concrete, Arjuna Priyara Ranasinghe

Dissertations

Strength of concrete is normally measured using the standard cylinder or cube. The measured strength is used for design. The accuracy of concrete strength is frequently challenged, particularly in large concrete structures where size effect of the test specimens is attributed for the differences. Many nondestructive tests were developed to evaluate concrete strengths. In recent years, it was obvious that these tests are unreliable. As the infrastructure decays, more nondestructive tests are required to evaluate the existing structures.

The Break Off Test is a recently developed nondestructive test. Although substantial amount of experimental investigations have been carried out on this …

Behavior Of Biaxially Loaded Concrete-Encased Composite Columns, Pedro Ricardo Munoz

Dissertations

The theory of nonlinear behavior of biaxially loaded short and slender composite columns is used to study the load-deformation and moment-curvature of four pin-ended composite column specimens tested under axial compressive load and biaxial bending moments in a single curvature. The accuracy of the test results is verified by comparison with analytical results obtained by a method of analysis that includes the nonlinear material properties of concrete and steel and covers the ascending and descending branches of the linear segmented column specimen. A computational method is presented to model the analytical behavior of the biaxially loaded composite column. Its validity …

Geotechnical Characterization Of Water Treatment Plant Residuals, Zhengyuan Xia

Theses

Evaluation of engineering properties of water treatment plant (WTP) residuals is a critical part in predicting their behaviors in monofills. In this study, ten WTP residual samples were collected from ten water treatment plants across the United States. Their general chemical/physical and geotechnical properties including liquid and plastic limits, compaction) shear strength, permeability and durability characteristics were determined.

It was observed that the geotechnical properties of WTP residuals are influenced by various factors such as mineral particle composition, organic content, type and amount of chemical additives) and time of aging, etc. Based on this study, the behavior of WTP residual …

Design, Construction, And Operation Of Water Treatment Plant Residual Monofills, Haitao Bian

Theses

Due to the stringent environmental regulations, landfilling becomes the most viable option for ultimate disposal of water treatment plant (WTP) residues. At present, most states apply the regulations for municipal solid waste (MSW) landfills to the landfilling of WTP residues. This is too stringent since the WTP residues are not hazardous. Therefore, development of suitable criteria for WTP residual monofills is necessary and urgent.

A set of environmental and geotechnical experiments was conducted to characterize WTP residues. It can be concluded that very little leachate will be produced and migration of leachate is unlikely. Also it was noted that insignificant …

Attachment Systems For Curtain Wall Construction And Maintenance Requirements, Peter S. Donaghy

Theses

Curtain Wall construction has become a familiar and widely used method for enclosing structures. Since the 1950's this type of enclosure has become increasingly the most popular choice of Designers and Builders. During this period of development, however, acceptable and uniform building standards have not evolved to create adequate quality control.

This thesis investigates some of the design requirements of Curtain Walls, in particular the attachment system, and the maintenance costs that are directly related to the attachment system and the consequences of such failures.

Constitutive Equation For Concrete Using Strain-Space Plasticity Model, Yuxiang Xing

Dissertations

Plasticity theory has been used to model the concrete constitutive relationship for about two decades. With the modifications and refinement based on experimental data, achievement has been made in these plasticity models for concrete. Almost all the existing models are developed in stress space. With a lot of experimental data and more understanding about stress states of concrete, the stress-space model shows many advantages. Because of this and also due to conventional engineering practice, the stress-space plasticity approach has been in the dominant position. However, the conventional stress-space plasticity method has one inherent drawback in which it cannot deal with …

Tensile Behavior Of Concrete And Mortar Under Direct Impact Tensile Load, Kayumars Emad

Dissertations

Structures are often subjected to impact loadings during their lifetime. Most structural specifications including the special provisions for seismic design in the current ACI building codes, have been developed on the basis of quasi-static assumptions. Cement composites are strain rate sensitive materials therefore, their properties determined under quasi-static condition should not be used to predict their performance under high strain rates.

The objectives of this investigation are:

• to develop a standard test set-up for direct tensile testing of cementitious composites.
• to study the tensile behavior of mortar and concrete under direct impact tensile load.
• to develop a simplified formula to …

Unreinforced Masonry Structures : Nonlinear Analysis And Evaluation Of Some Rehab Schemes, Sanjay Mehta

Dissertations

Unreinforced masonry (URM) structures have been a common type of construction in the past and are still used in regions of low seismicity. Retrofitting of these structures is necessary because of two reasons: Firstly, observed damage after earthquakes reveals that URM construction is one of the most hazardous constructions even in the region of low seismicity; secondly, reclassification of seismic zones would require retrofitting of existing structures to comply with new guidelines for earthquake design.

Retrofitting measures require that the response of original and new structural systems as well as their interaction be considered. It is therefore important to correctly …

Utilization Of Fly Ash In Concrete, Chai Jaturapitakkul

Dissertations

Fly ash, a by-product of coal burning power plants, is produced in large quantities each year. It is commonly known that fly ash possesses pozzolanic behavior which can enhance the properties of concrete. Due to a lack of proper understanding on the formation of fly ash and its performance in concrete, the question of quality assurance has frequently been a major concern of engineers using fly ash in their construction projects. As a result, much fly ash is disposed of as waste material in landfills. Recent environmental concerns and a shortage of landfill space have rapidly escalated the disposal cost …