Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Structural Engineering (54)
- Materials Science and Engineering (29)
- Engineering Education (28)
- Physical Sciences and Mathematics (23)
- Transportation Engineering (17)
-
- Electrical and Computer Engineering (16)
- Environmental Engineering (15)
- Social and Behavioral Sciences (14)
- Environmental Sciences (11)
- Sustainability (11)
- Architecture (8)
- Architectural Engineering (7)
- Biotechnology (7)
- Environmental Health and Protection (7)
- Environmental Studies (7)
- Life Sciences (7)
- Operations Research, Systems Engineering and Industrial Engineering (7)
- Mechanical Engineering (6)
- Chemistry (5)
- Computer Sciences (4)
- Energy Policy (4)
- Geotechnical Engineering (4)
- Mining Engineering (4)
- Physical Chemistry (4)
- Public Affairs, Public Policy and Public Administration (4)
- Aerospace Engineering (3)
- Education (3)
- Keyword
-
- Concrete (14)
- Rheology (12)
- Steel (11)
- Bridges (9)
- Rubber (9)
-
- Asphalt (8)
- Durability (6)
- Earthquakes (6)
- Pavements (6)
- Binders (5)
- Dissolution (5)
- High friction surface treatment (HFST) (5)
- Simulation (5)
- Skid resistance (5)
- Viscosity (5)
- Aggregate (4)
- Bridge (4)
- Carbonation (4)
- Compressive Strength (4)
- Design (4)
- Dynamics (4)
- Finite Element Method (4)
- Fly Ash (4)
- Fly ash (4)
- Infrastructure (4)
- Reinforced concrete (4)
- Structural build-up (4)
- Temperature (4)
- Aggregates (3)
- Asphalt binder (3)
- Publication Year
- Publication
-
- Masters Theses (432)
- Civil, Architectural and Environmental Engineering Faculty Research & Creative Works (209)
- Doctoral Dissertations (132)
- International Symposia on Low Cost Housing Problems (119)
- Professional Degree Theses (84)
-
- Bachelors Theses (43)
- Engineering Management and Systems Engineering Faculty Research & Creative Works (6)
- Electrical and Computer Engineering Faculty Research & Creative Works (5)
- Opportunities for Undergraduate Research Experience Program (OURE) (4)
- Patents (4)
- UMR-MEC Conference on Energy / UMR-DNR Conference on Energy (4)
- Economics Faculty Research & Creative Works (2)
- Materials Science and Engineering Faculty Research & Creative Works (2)
- Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works (1)
- Miners Solving for Tomorrow Research Conference (1)
- Mining Engineering Faculty Research & Creative Works (1)
- Physics Faculty Research & Creative Works (1)
- Undergraduate Research Conference at Missouri S&T (1)
- Publication Type
Articles 721 - 750 of 1051
Full-Text Articles in Civil Engineering
The Measurement Of Explosively Induced Stresses In Rock-Like Materials With A Capacitive Transducer, Vincent Paul Crane
The Measurement Of Explosively Induced Stresses In Rock-Like Materials With A Capacitive Transducer, Vincent Paul Crane
Masters Theses
"A capacitive transducer was developed for measuring the free surface motion in Hydrostone blocks loaded by an explosive plane wave generator approximately one foot from the specimen. The charge to specimen distance was adjusted to produce a single spall, the position of the fracture being noted on the recovered specimen. The longitudinal wave velocity in each specimen was determined by the ultrasonic pulse technique before each shot. From the above measurements the stress, strain and strain rate at the point of fracture were determined. An attempt was made to determine the actual fracture time with imbedded [sic] conductive graphite rods, …
A Study Of The Compressibility Of Silty Soils., Marvin L. Byington
A Study Of The Compressibility Of Silty Soils., Marvin L. Byington
Masters Theses
"This study has been conducted to determine the applicability of the Terzaghi Theory of Consolidation and to determine the compressibility of silt soils with varying clay content. A pure silt was extracted from the Lebanon Silt Loam and mixed with varying amounts of the Onyx Cave Illite-Chlorite Clay. The compressibility of these mixtures was determined and an attempt made to apply the Terzaghi Theory in the analysis. It was found that the compressibility of soils high in silt content is very low. It was also found that the Terzaghi Theory may be applied to mixtures of 15 percent or more …
Effects Of Mixing Procedure Upon Uniformity Of Fibre Reinforced Concrete, Donald E. Nortrup
Effects Of Mixing Procedure Upon Uniformity Of Fibre Reinforced Concrete, Donald E. Nortrup
Masters Theses
"This thesis describes the effects of several methods of introducing wire fibres into a concrete mix upon the uniformity of wire fibre reinforced concrete. Various mechanical and manual methods of introducing the fibres were used and comparisons of the methods were based upon variability in splitting tensile strength and the quantitative distribution of the fibres as determined by visual inspection of sawed cylinders. Test results show that the tensile strength of concrete is increased appreciably by the inclusion of steel wire fibres in the mix and the uniformity of strength is similar to that of unreinforced concrete. The methods of …
Quality Of Surface And Subsurface Water In A Missouri Carbonate Karst Terrain (Dry Fork, Norman, And Benton Creek Watersheds), James Chi Huang
Quality Of Surface And Subsurface Water In A Missouri Carbonate Karst Terrain (Dry Fork, Norman, And Benton Creek Watersheds), James Chi Huang
Masters Theses
"Little is known about the effect of carbonate karst terrain on water quality in the United States. Karst topography occurs over a large portion of Missouri and over a significant part of other midwestern states. The objectives of this study were the determination of the quality of surface and subsurface water in carbonate karst terrain and the investigation and evaluation of the effect of rainfall and runoff on water quality in the Meramec Spring area, east of Rolla, Missouri, during both the dry and wet seasons over the period of one year. Water samples were collected at a large number …
Matrix Computer Analysis Of Curvilinear Grid Systems, David Leon Fenton
Matrix Computer Analysis Of Curvilinear Grid Systems, David Leon Fenton
Doctoral Dissertations
"A general equilibrium-stiffness method of matrix structural analysis was adapted and applied to the solution of the member end forces and moments of each of the members in a curvilinear structural grid system. A structural system of this nature is commonly used as the supporting framework for a "steel-framed dome", in addition to being a basic structural component in many aerospace applications. An integral part of the development of the analysis was the development of a computer program to perform the many complex operations required to obtain the solution. The engineer, by supplying the appropriate structural data and load data …
The Recovery And Characterization Of Organic Micropollutants From Missouri Subsurface Waters, John Warren Smith
The Recovery And Characterization Of Organic Micropollutants From Missouri Subsurface Waters, John Warren Smith
Masters Theses
"The main objectives of this investigation were the recovery and partial characterization of organic micropollutants from Missouri subsurface waters and the evaluation of the number of filters in series required for effective removal of organic materials from water using the Carbon Adsorption Method.
The organics were recovered from a spring and two deep wells using three large capacity (1. 5 cu. ft.) activated carbon filters in series. Chloroform and ethanol were employed as primary elutants, but acetone and benzene were also investigated. Characterization was by organoleptic, chemical, and biological determinations, toxicity measurements, and solubility partitioning.
Organic materials were found in …
The Influence Of A Fixed Failure Plane On The Direct Shear Test, Kenneth Hodges Bell
The Influence Of A Fixed Failure Plane On The Direct Shear Test, Kenneth Hodges Bell
Masters Theses
"The analysis of the direct or box shear test for determining the shear strength of a soil makes use of the assumption that the failure plane coincides with the plane of separation between the two halves of the box. Hvorsley, Roscoe, Hansen and others have theorized and experimentally shown that this is not always the case. The stress distributions on the failure plane, however it may be oriented, are not as uniform as generally assumed. This investigation was carried out to compare direct shear tests run on granular, air dry material where the failure was allowed to take place naturally …
Numerical Solution Of Water Hammer Analysis Including Friction Losses, Lih Hsun Weng
Numerical Solution Of Water Hammer Analysis Including Friction Losses, Lih Hsun Weng
Masters Theses
"The water hammer phenomena is a very important problem in pipe lines and gate operations. There are many analytical solutions tor water hammer problems including friction losses, but most of them use a linear approximation tor the friction effect that is different from the actual situation. Also the existing methods for solving water hammer problems involve difficult mathematical operations that are impractical and inaccurate.
In order to find a more rapid method for solving water hammer problems including friction losses and to obtain closer agreement with the actual condition, the problem is solved here using the basic partial differential equations …
The Effect Of Initial Moisture Content On The Swelling Characteristics Of Putnam Soil, William Howell Branum
The Effect Of Initial Moisture Content On The Swelling Characteristics Of Putnam Soil, William Howell Branum
Masters Theses
"The literature on swell and swell pressure in expansive soils was reviewed. The effect of initial moisture content on the swelling properties of untreated Putnam silt loam was investigated by performing free swell and swell pressure tests on specimens with varying initial moisture contents compacted to a constant dry density. The free swell tests were conducted by allowing the samples to swell freely under a low load (the weight of the plunger and the porous stone in the swelling apparatus) and measuring the volume change that resulted. The swell pressure tests were performed using two different procedures: (1) determining the …
A Procedure For Analysis Of Three-Segment Symmetrical Balcony Beams, Ronald A. Hansen
A Procedure For Analysis Of Three-Segment Symmetrical Balcony Beams, Ronald A. Hansen
Masters Theses
"A procedure for analysis of three-segment symmetrical balcony beams unsymmetrically loaded was derived whereby the normally complicated energy solution is eliminated. A moment distribution technique is used in the solution of the first and second phases of the problem. Tables are given to aid in determining the proper distribution factors. Due to the complexity of the third phase, a table of solutions is given for varying values of length, geometry, etc.. An example problem is also given demonstrating the use of interpolation within the tables"--Abstract, page ii.
A Study Of Sedimentation In A Well Regulated Major Drainage Basin - The Monongehala, Allegheny And Upper Ohio Rivers, William S. Wood
A Study Of Sedimentation In A Well Regulated Major Drainage Basin - The Monongehala, Allegheny And Upper Ohio Rivers, William S. Wood
Masters Theses
"This investigation is concerned with the study of various programs employed in reducing and controlling sediment. The measures employed by the U.S. Soil Conservation and Forestry Services to control and reduce erosion, the primary source of sediment, was studied. The flood control and river navigation structures constructed and operated by the U.S. Army Corps of Engineers and the effect of these structures on sedimentation was also evaluated. State and local community regulation and control of exploited natural resources was studied to determine their influence on the generation and control of sediment.
The Allegheny, Monongehala and upper Ohio River Drainage Basin …
The Development Of A Modified Soil Shear Vane, Vernelle Truman Smith
The Development Of A Modified Soil Shear Vane, Vernelle Truman Smith
Masters Theses
"The purpose of this investigation was to determine how the soil shear graph could be modified to measure more accurately values of shear strength of fine-grained, cohesive soils. Several modifications were tried, however, the one that gave the most satisfactory results consisted of a vane and base plate mechanism.
A red clay of high plasticity obtained from a local cave was tested in both the natural or undisturbed state and in the remolded state. The only variable was the moisture content. Compaction effort was the same for all remolded specimens. Tests were conducted on undisturbed samples taken with thin walled …
Checking Rigid-Framed Structures By Extended Moment-Area Equations, Lucky Li-Chi Chow
Checking Rigid-Framed Structures By Extended Moment-Area Equations, Lucky Li-Chi Chow
Masters Theses
"Using the known moments obtained from the moment distribution solution, the extended moment-area equations are used to check whether or not delta x, delta y, delta theta are truly zero, or are any other quantity they are supposed to be. In order to get a reasonably correct answer, a solution must meet both the elastic checks and the static checks for their equilibrium and compatibility functions. Using the extended moment-area equations, the magnitudes of the slopes and deflections at all of the joints in framed structures can be found easily"--Abstract, page ii.
Bending Of Isosceles Right Triangular Plates, Ping-Tung Huang
Bending Of Isosceles Right Triangular Plates, Ping-Tung Huang
Masters Theses
"In this thesis the series expansion method is used to obtain the moments and deflections of an isosceles right triangular plate bent by arbitrary transverse loads. The method is based on using an antisymmetric load on a square plate. Two boundary conditions are solved and the numerical results obtained for these cases are tabulated"--Abstract, page ii.
The Shrinkage Characteristics Of Plastic Clay, Edward De Santis
The Shrinkage Characteristics Of Plastic Clay, Edward De Santis
Masters Theses
"This investigation was conducted to determine the shrinkage properties of a clay soil whose structure had been artificially altered in the laboratory. Various percentages of dispersing and flocculating agent were added to the soil and the shrinkage curves plotted.
The shrinkage curves of the chemically treated soil were compared with those of the untreated soil. The values of the theoretical and observed shrinkage limits were also compared to determine the validity of the standard shrinkage limit test which, at present, does not take into consideration the structure of the soil.
An explanation of the differences in the shrinkage characteristics of …
The Effect Of Epoxy Resin In Stone And Slag Concrete, James Chun-Min Chou
The Effect Of Epoxy Resin In Stone And Slag Concrete, James Chun-Min Chou
Masters Theses
"In concrete construction, the weight of the structure represents a large portion of the total load carried; thus, there is considerable advantage in reducing the weight of the concrete. To obtain this result, there are at least three approaches (1). The first method of producing lightweight concrete is by means of substituting a porous lightweight aggregate of low specific gravity for the ordinary aggregate. The second method relies on introducing large voids within the concrete or mortar mass; this is known as aerated, cellular or gas concrete. The third method is simply to omit the fine aggregate from the mix …
A Study Of Shear Failures In Footing, Fred V. Cole
A Study Of Shear Failures In Footing, Fred V. Cole
Masters Theses
"The purpose of this investigation was to conduct a model study of the basic mechanism of failure in shear of reinforced concrete footings through the use of plaster models.
Sixty-nine models were constructed and loaded to failure on a foundation of sand using various combinations of size and depth of model and column size. Load - deformation data and failure loads were recorded.
It was determined that model studies are a feasible procedure to analyse the mechanism of failure in footings. The perimeter of the loaded area was found to be the critical section in determining the ultimate shearing strength …
Location Of Maximum Moments In A Continuous Two Span Beam Due To Moving Loads, Thomas Houng-Yn Yang
Location Of Maximum Moments In A Continuous Two Span Beam Due To Moving Loads, Thomas Houng-Yn Yang
Masters Theses
"The objective of this investigation is to determine the positioning of vehicle wheels so as to cause maximum positive and negative moments in a two span continuous girder. Several variables are considered, namely, the ratio of loads to each other, the distance between wheels, and ratio of one span length to the other. The necessary equations are derived and the results, after being programmed on a computer, are shown in a series of curves.
These curves serve as a tool for the designer, enabling him to arrive at design moments by simple substitution in the appropriate moment expression, within the …
Some Effects Of Selected Biodegradable Detergents On The Aeration Of Water And Activated Sludge, Donald Ernest Modesitt
Some Effects Of Selected Biodegradable Detergents On The Aeration Of Water And Activated Sludge, Donald Ernest Modesitt
Masters Theses
"The purpose of this study was to determine what effects the presence of selected biodegradable detergents have on the aeration of water and the activated sludge process for aerobic wastewater treatment. The detergents studied were LAS #1, Alfol, and Nalkylene. It was of particular interest to determine if these detergents decreased the oxygen absorptive capacities of water and wastewater. If detrimental effects were produced by the detergents it was then desired to determine if these effects were serious enough to create problems with aerobic wastewater treatment and aeration in receiving bodies of water.
A two liter volume of the liquids …
Analysis Charts For Single And Multi-Span Gabled Frames, John (Chung-Su) Ma
Analysis Charts For Single And Multi-Span Gabled Frames, John (Chung-Su) Ma
Masters Theses
"A method for analyzing single and multi-span gabled frames using analysis charts is presented. This method requires considerably fewer computations than methods previously used (such as the moment distribution and slope-deflection methods). Analysis charts are presented for single gabled frames having fixed or pinned ends at ground level, and charts are also presented which can be used to efficiently analyze multi-gabled frames.
The data for the analysis charts were obtained using matrix techniques in conjunction with the digital computer. These techniques are described"--Abstract, page ii.
Modification Of The Hydraulic Jump By Submerged Jets, Edward Leon Tharp
Modification Of The Hydraulic Jump By Submerged Jets, Edward Leon Tharp
Masters Theses
"Tests were performed in order to determine the effect of submerged jets injecting water into the base of the hydraulic jump. The jump was studied in terms of the following properties: specific energy of the flow leaving the hydraulic jump, length of the hydraulic jump, tailwater depth, and wave formation properties. These properties for the hydraulic jump with submerged jets were compared to the natural hydraulic jump.
Results of the tests indicate that: submerged jets at any angle tested tend to decrease the specific energy of the water leaving the jump and are more effective than the impulse-momentum principle indicates, …
Analysis Of Sand Asphalt Mixtures, Maurice A. Sayegh
Analysis Of Sand Asphalt Mixtures, Maurice A. Sayegh
Masters Theses
"The objective or this investigation was to determine the optimum percent of asphalt which should be added to the sand asphalt mixture. Also the effects of filler on the properties or the sand-asphalt mixture were evaluated.
The variables in this study were mineral filler, asphalt cement, and asphalt content. The sand used in this study was sub-rounded, and uniformly graded. The asphalt was asphalt cement with two different penetrations, one of 85-100 penetration grade and the other of 120-150 penetration grade.
Three different groups of mixtures of sand-asphalt were prepared. The first group consisted of adding 85-100 penetration asphalt to …
Some Effects Of Sodium Pentachlorophenol On Activated Sludge And Minnows., James Albert Heidman
Some Effects Of Sodium Pentachlorophenol On Activated Sludge And Minnows., James Albert Heidman
Masters Theses
"The primary purpose of this investigation was to determine the effect of sodium pentachlorophenol on activated sludge. An additional objective was to determine the toxicity of sodium pentachlorophenol to minnows.
All activated sludge units were grown on a glucose and mineral nutrient waste. In addition, a unit acclimated to 100 and 250 mg/1 of sodium pentachlorophenol was also studied. The effect of a shock loading of sodium pentachlorophenol was found to depend on the concentration of the loading and also on the group of micro-organisms which were predominating. One activated sludge system was seriously impared at a shock loading of …
The Effect Of Epoxy Resins On The Durability And Unconfined Compressive Strength Of An A-1b Soil, Guy H. Payne
The Effect Of Epoxy Resins On The Durability And Unconfined Compressive Strength Of An A-1b Soil, Guy H. Payne
Masters Theses
"This thesis reports the procedure and results obtained from the stabilization of a clean poorly graded sand with various amounts of epoxy resin. The same soil was also stabilized with varying amounts of Portland cement in order to have a basis for comparison of the results obtained. The sand used in this research came from the Meramec River in Central Missouri and is classed as an A-lb soil by the AASHO classification system. The following tests were performed on the stabilized samples: 1. Specimens were molded and compacted at 4%, 6%, 8%, 10% and 12% portland cement by weight of …
A Numerical Solution For Beam-Columns On Non-Linear Foundations, Wendelin H. Mueller Iii
A Numerical Solution For Beam-Columns On Non-Linear Foundations, Wendelin H. Mueller Iii
Masters Theses
"A program for Matlock's recursive method, a numerical method which will analyze beams and columns with linearly varying spring supports, was modified to enable the solution of such members supported by non-linear springs. This modification was accomplished by an iterative technique. The final result of this paper is a computer program which can be used to solve beams or columns with non-linear spring supports, giving as output the deflection, slope, moment, shear, net load and curvature of the structure at uniformly spaced locations"--Abstract, page ii.
The Effect Of Structure On The Consolidation Characteristics Of A Clay Soil, Dale E. Sukow
The Effect Of Structure On The Consolidation Characteristics Of A Clay Soil, Dale E. Sukow
Masters Theses
"This paper reports the results of an investigation conducted to establish the effect of structure on the consolidation characteristics of a clay soil. Soil structure was caused to form in the soil by the addition of electrolytes to flocculate and disperse the clay fraction of the soil.
Consolidation tests were performed on specimens of the treated soil prepared at moisture contents well above the liquid limit of the soil. The consolidation data from these tests are evaluated and comparisons are made to relate the influence of structure to the consolidation characteristics of the treated soil.
The influence of structure on …
The Plastic Behavior Of Reinforced Concrete Beams With Varying Percentages Of Reinforcing Steel Symmetrically Placed, J. Leroy Hulsey
The Plastic Behavior Of Reinforced Concrete Beams With Varying Percentages Of Reinforcing Steel Symmetrically Placed, J. Leroy Hulsey
Masters Theses
"The purpose of this study is to determine the limitations of the plastic behavior of reinforced concrete beams with varying percentages of high strength steel (ASTM-A-432) cutoff in the compression region d distance beyond the point of inflection. Comparison was made with the derived equations.
Steel was placed symmetrically in order to obtain like action at critical sections. The members tested were of a propped beam nature having a total clear span of 5'6" with a 6" overhang on one end and 1'6" overhang on the other. Concentrated loads were applied so as to obtain midspan loading and fixed end …
Slope Stability Analysis Of A Fissured Glacial Clay, Byron G. Walker
Slope Stability Analysis Of A Fissured Glacial Clay, Byron G. Walker
Masters Theses
"A slope in an over-consolidated, fissured clay was analyzed by the Swedish Method of Slices.
Values of cohesion (c) and angles of friction (Ø) were determined by three different types of direct shear tests (undrained, drained and residual).
Factors of safety (functions of c and Ø) indicated that the direct shear test parameter gave a factor of safety approximately four times that represented by failure conditions in the field. Drained tests gave a factor of safety nearly 2.3 times the value represented by field conditions. The conclusion is made that these two tests are of limited value for slope stability …
Plastic Design Of Steel Frames For Minimum Weight, I-Chen Hung
Plastic Design Of Steel Frames For Minimum Weight, I-Chen Hung
Masters Theses
"The purpose of this study was to develop a method for weight minimization of the plastically designed frame, braced normal to its plane of action, and composed of prismatic steel members. The method accounts for the non-linear relationship between weight and moment capacity for both beams and columns. Reduction in the pure-bending fully-plastic moment in the presence of axial loading and both beam-column instability and overall frame instability due to sidesway are taken into account. Provision is made for minimization of frames employing standard sections as well as for frames whose built-up members may be chosen from a continuous spectrum. …
An Investigation Of Consolidation On Compacted Partially Saturated Clarksville Soil, Ma-Tai Matthew Chen
An Investigation Of Consolidation On Compacted Partially Saturated Clarksville Soil, Ma-Tai Matthew Chen
Masters Theses
"The Terzaghi theory of consolidation and the assumption of his theory, pore pressure and effective stress, secondary compression and rheology were all reviewed and discussed. Eight compacted unsaturated samples made from Clarksville silty clay (CL) under different compaction efforts and moisture contents were subjected to consolidation load increments. Each load increment was maintained for 24 hours. An extra compacted sample was loaded for one month to investigate secondary compression.
From e-p curves, five settlement vs. compacted embankment height curves were derived for different compaction effort and moisture contents. These curves may be of practical use, when checked by field measurements …