Civil Engineering Commons^™

Class-Wise Histogram Matching-Based Domain Adaptation In Deep Learning-Based Bridge Element Segmentation, Tarutal Ghosh Mondal, Zhenhua Shi, Haibin Zhang, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study focused on the problem of domain shift in deep learning-based bridge element segmentation. The impracticability of accounting for all possible variabilities vis-à-vis structural shape, size, color, texture, illumination, and other operational conditions in the training process leads to the deterioration in the model performance when applied to test data from novel unseen domains. In such situations, rebuilding the model with labeled training data from the target domain becomes prohibitively expensive and time-consuming in many practical cases. Recent advancements in unsupervised domain adaptation techniques are known to provide viable solutions to this problem. However, it was observed in this …

Effect Of Gluconate Molecules On The Reaction Kinetics Of C-(N)-A-S-H And N-A-S-H Gel Formation, Jiafeng Kong, Chao Sun, Zuhua Zhang, Chenglong Cai, Yubin Cao, Yanru Wang, Hongyan Ma, Xuesen Zeng, Hao Wang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Organic ligands are widely used to regulate setting in cementitious binders, yet their chemistry-selective action in geopolymers (GPs) remains unclear. Here we isolate the role of sodium gluconate (SG) in early reaction kinetics across a Ca-rich GP that forms a calcium-(sodium)-aluminosilicate hydrate (C-(N)-A-S-H) gel and a Ca-poor GP that forms a sodium-aluminosilicate hydrate (N-A-S-H) gel. Four GPs spanning Ca/Si ≈ 1.01 to 0.01 were prepared with identical activator chemistry and dosages of SG up to 5 wt.% of precursors. Setting time, isothermal calorimetry, pore-solution speciation (TOC, ICP-OES, and pH), selective dissolution (reaction extent), low-field¹H NMR, XRD, FTIR, SEM-EDS, …

Bond Behavior Of Magnesium Potassium Phosphate Cement (Mkpc) Coating For Steel Reinforcement, Eric Williams

Masters Theses

"This research investigates the bond behavior of magnesium potassium phosphate cement (MKPC) coated mild steel deformed bars in conventional concrete and concrete repair materials. For typical steel reinforcement in concrete, a thin “passive layer” develops around the reinforcement, which protects the reinforcement from corrosion. The concrete carbonates over time, reducing the protection of the passive layer and allowing chlorides, which corrode the reinforcement, to penetrate at an increasing rate. In some cases, to combat this corrosion, a protective layer is added to the reinforcement prior to installation. Common protective layers include epoxy coatings or zinc galvanization. MKPC is a novel …

System Design For Highly Accurate And Efficient Target Detection In Triaxial Testing, Qingqing Fu

Masters Theses

Accurate and automated recognition of coded targets is crucial for high-precision photogrammetry-based measurements in triaxial testing. Traditional recognition methods, including those based on deep learning and table decoding, often struggle with issues such as perspective distortion, rotation, and variable lighting, leading to unreliable results. While deep learning approaches offer some improvements, they remain computationally intensive and sensitive to environmental factors.

This thesis introduces an innovative system that replaces deep learning algorithms with a blob analysis-based method for efficient and robust recognition of coded targets. The system also employs newly designed solid points of varying sizes and patterns, eliminating the need …

Gfrp Reinforced Bridge Barriers: Experiment Testing, Manish Kumar Gadhe

Masters Theses

This study focused on evaluating the performance of concrete bridge barriers reinforced with Glass Fiber Reinforced Polymer (GFRP) compared to those reinforced with conventional mild steel. Four full-scale barriers were constructed, three using GFRP bars as the reinforcement and one with mild steel reinforcement. These were cast on two concrete slabs to ensure consistent support conditions. The use of GFRP aims to address durability concerns associated with steel reinforced concrete (RC), particularly corrosion of these bars in harsh environments.

To simulate real-world impact scenarios, a weighted cart was launched at each barrier using a guided sled system. Sensors, including load …

Unmanned Vehicle Having Flight Configuration And Surface Traverse Configuration, Genda Chen, Alec Reven, Bo Shang, Zenhua Shi, Liujun Li, Boyang Li

Patents

An unmanned vehicle includes a body, at least one power source coupled to the body, a flight propulsion system coupled to the at least one power source and configured to propel the unmanned vehicle through air, and a surface propulsion system coupled to the at least one power source and configured to propel the unmanned vehicle along a surface. The unmanned vehicle is configured to switch between a flight configuration in which the unmanned vehicle is propelled through air via the flight propulsion system, and a surface traverse configuration in which the unmanned vehicle is propelled along the surface via …

Large-Scale Carbon-Mineralization Through Oxalatization, Hongyan Ma, Wenyu Liao

Patents

The present invention is broadly concerned with mineralization methods that assist in permanent carbon storage. The methods provide a storage mechanism for oxalic acid generated by existing or future-developed carbon capture and conversion methods that convert CO2 to oxalic acid. That oxalic acid can be injected into a subsurface rock formation containing non-carbonate rock to form oxalates or oxalate hydrates. Alternatively, oxalic acid can be mixed with mine tailings, well drilling dirt, crushed rocks, etc., that contain desired non-carbonate rock minerals, to promote mineralization.

Aqueous Carbonation Of Steel Slags: A Comparative Study On Mechanisms, Nannan Zhang, Gao Deng, Wenyu Liao, Hongyan Ma, Chuanlin Hu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated the aqueous carbonation mechanisms of three typical steel slags: ladle metallurgy furnace (LMF) slag containing high Al content, electric arc furnace (EAF) slag featuring high Si content and relatively low Al content, and ladle-arc fusion (LAF) slag with medium-Al content. It was found that the carbonation kinetics of the three slags were similar and followed the surface coverage model within the first 6 h of carbonation. Initially, the carbonation process was primarily governed by the reaction product precipitation. After 3 h of carbonation, the process was dominated by mineral dissolution, controlled by the uncovered reactive sites. The …

Every Publication Needs An Author Verified Tl;Dr Statement, Sarah Oerther, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Mitigating Frost Heave And Thaw Weakening In Roads Using Wicking Geotextile, Javad Galinmoghadam

Doctoral Dissertations

"Excess water is known to be the primary cause of soil and foundation problems. In cold regions, water-related problems are exacerbated by seasonal freezing and thawing cycles. Frost heave and thaw weakening is the leading cause of premature pavement failure and consume considerable budgets of the Department of Transportations in cold regions. The first step to designing mitigation measures is the ability to predict frost heave under different conditions. This study aims to introduce a new method for quantifying frost heave using a prediction model based on the state surface approach. This proposed model addressed many inconsistencies and limitations of …

Characterization And Modeling Of Properties Of Unsaturated And Partially Damaged Cement-Based Materials, Rezwana Binte Hafiz

Doctoral Dissertations

"Transport properties, governing the resistance of cement-based materials to harmful substances are essential considerations for long-term performance. This study addressed the often-overlooked dimension of transport properties in unsaturated cement-based materials, crucial as most concrete structures face variable environmental conditions, leading to partial saturation. A two-scale model was introduced, enhancing our comprehension of transport properties in conditions reflecting real-world scenarios. Empirical correlation representing bulk paste characteristics was established, facilitating the upscaling of properties to mortar and concrete. The model was extended to predict the transport properties of mortar as well.

Environmental factors can contribute to the degradation of cement-based materials, with …

Exploring The Feasibility Of Innovative Integration Of Phase Change Materials For Thermo-Adaptive Asphalt Pavements, Farshad Saberi Kerahroudi

Doctoral Dissertations

"Current research examined the feasibility and efficiency of employing phase change materials (PCMs) in asphalt pavement materials to result in thermo-adaptive asphalt pavement. The PCM was introduced to the asphalt materials in three different scales, including asphalt binder, asphalt mastic, and asphalt mixture. After investigating asphalt at different scales, mix blending method was found as the easiest method without any complexity to mix asphalt binder with PCM. The testing results could reveal an improvement in the high temperature performance of asphalt binder without sacrificing the low temperature performance with the presence of PCM and Gilsonite. Also, introducing PCM to asphalt …

Nmr Relaxometry Approach For The Detection Of Asphalt Binder Performance Properties, Rebecca Herndon

Doctoral Dissertations

"Asphalt is a necessary material for transportation infrastructure. Understanding the material properties of asphalt binders is critical for improving infrastructure and enhancing the lifetime of pavements. While the physical properties of asphalt binders are well-defined by standard procedures and parameters, the chemical environment lacks definition. Physical parameters like viscosity and stiffness are traditionally used to differentiate asphalt binders, describe aging, and indicate the impact of additives. However, these tests have limited insight into the material's chemical environment. Therefore, a nondestructive analytical technique, nuclear magnetic resonance (NMR) relaxometry, was employed to investigate the chemical environment of asphalt binders. Although NMR relaxometry …

Characterizations Of Eco-Friendly Class C Fly Ash-Based Alkali-Activated Mixtures For Various 3d-Printing Techniques, Fareh Abudawaba

Doctoral Dissertations

This study explored the potential of using high-calcium class C fly ash (FA) as the main precursor for synthesizing alkali-activated mortar (AAM) suitable for 3D-printed concrete (3DPC) applications. The objective was to broaden the selection of AAMs, designed to suit various printing techniques, including continuous mixing and pumping, large batch mixing, and set-on-demand processes. The study began by assessing the fresh properties of various mixtures, utilizing tests such as open time (OT), initial setting time (IST), immediate axial deformation, and penetration test (PT), to determine the mixtures' extrudability and buildability. The study optimized mixtures with a broad spectrum of cycle …

Evaluating And Relaxing The Limits On Flexural Reinforcement Ratio Of Masonry Shear Walls, Tousif Mahmood

Doctoral Dissertations

Reinforced masonry shear walls (RMSWs), essential for lateral and out-of-plane load-resisting systems in modern construction are constrained by TMS 402/602 code limits on reinforcement ratios ("ρ" _"max" ) and axial compressive stresses (≤10% of masonry compressive strength, f_m^'), undermining masonry’s inherent compression capacity under high axial loads. This dissertation investigates the seismic performance of reinforced masonry shear walls (RMSWs) subjected to high axial compressive stresses (10–20% of f_m^'), with a focus on walls violating the maximum reinforcement ratio ("ρ" _"max") and axial load limits of TMS 402-22. Through experimental testing of 30 large-scale fully grouted (FG) and partially grouted (PG) …

Dynamic Response, Assessment, And Retrofitting Of Prestressed Concrete Bridge Girders Subjected To Lateral Impact Loads, Haitham A. Abdelmalek

Doctoral Dissertations

Over height vehicle collisions pose a growing threat to the resilience of bridge infrastructure across the United States. According to the American Road & Transportation Builders Association (ARTBA, 2024), approximately 36% of all U.S. bridges require major repair or replacement, with an estimated cost of $400 billion. This dissertation investigates the structural dynamic response, damage assessment, and retrofitting strategies for prestressed concrete (PC) bridge girders subjected to lateral impact loading.

The research comprised two main phases: (1) numerical modeling and (2) experimental testing. A validated 3D nonlinear finite element (FE) model was developed to conduct parametric studies on impact behavior, …

A Strategic Insight Into The Market For Carbon Management Capacity, Mahelet G. Fikru, Ting Shen, Jennifer Brodmann, Hongyan Ma

Economics Faculty Research & Creative Works

This study presents the market for carbon management capacity via carbon capture, utilization, and storage technologies, identifying demand and supply forces, as well as clarifying the potential impact of market and non-market-based shocks on technology developers versus adopters. The paper addresses a prevailing gap in market analysis, introducing a microeconomic framework and unique dataset to identify key players, market forces, and policy incentives shaping the carbon capture, utilization, and storage landscape. The analysis equips industry stakeholders, policymakers, and investors with valuable insights regarding (1) leaders in the design, development, and manufacture of carbon capture, utilization, and storage technologies (supply), (2) …

Fitting Quality Of Nmr Relaxation Data To Differentiate Asphalt Binders, Rebecca M. Herndon, Kevin Lai, Magdy Abdelrahman, Klaus Woelk

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt binder performance grades (PGs) are important metrics in designing pavements for effective transportation infrastructure. the PG system relies on the binder's stiffness and is determined through energy- and time-intensive physical testing. Physical properties, like stiffness, can also be determined by spin–lattice NMR relaxometry, a non-destructive chemical method. NMR relaxometry can quantify the molecular mobility of materials by determining relaxation times from exponential decays of excited nuclear magnetization. While relaxation times have been used to determine physical properties of materials, a quantitative relation to the PG grades of asphalt binder is yet to be established. in this study, T1 NMR …

Anti-Corrosion Performance Of Magnesium Potassium Phosphate Cement Coating On Steel Reinforcement: The Effect Of Boric Acid, Fan Zhang, Jihui Qin, Kangyi Cai, John J. Myers, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

It has recently been found that magnesium potassium phosphate cement (MKPC) paste coating applied on the surface of steel reinforcement can effectively retard the onset of corrosion and suppress corrosion reactions. However, the fast-setting nature of MKPC—which is a merit in repair—can be problematic in a practical engineering process of coating the steel reinforcement with MKPC paste. To address this problem, boric acid (H₃BO₃) was added as a retarder in an MKPC formulation to prolong the setting time. This work investigated the impact of boric acid (at 5% by weight of MgO) on the anti-corrosion performance …

The Effects Of Wildfires On The Mental And Physical Health Of School-Age Children In North America: A Scoping Review, Sarah Oerther, Sarah Manspeaker, Alison Wix, Daniel Oerther, Carmen Marsit

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Background: Wildfires are occurring more often and with greater intensity, leading to longer and harsher fire seasons. As a result, children are more frequently exposed to wildfire smoke, which increases their risk of mental and physical health effects. Purpose: The purpose of our scoping review is to explore the current literature on what is known about the direct and indirect impacts of wildfires on the mental and physical health of school-age children in North America (5 to 18-year-olds). Methods: A health sciences librarian-assisted literature search, with input from the research team, was performed. Results: A total of 16 studies were …

Asphalt-Binder Mixtures Evaluated By T1 Nmr Relaxometry, Rebecca M. Herndon, Jay Balasubramanian, Magdy Abdelrahman, Klaus Woelk

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt pavements make up a majority of the essential transportation systems in the US. Asphalt mixtures age and degrade over time, reducing the pavement performance. Pavement performance critically depends on the aging of asphalt binder. The aging of asphalt binder during construction is traditionally modeled by rolling thin film oven (RTFO) testing, while aging during service life is modeled by pressure aging vessel (PAV) testing. Comparing these models to the aging of binders in actual pavements is limited because, to be used for current testing, binders must be separated from the pavement's aggregate by solvent extraction. Solvent extraction will, at …

Asphalt-Binder Mixtures Evaluated By T1 Nmr Relaxometry, Rebecca M. Herndon, Jay Balasubramanian, Magdy Abdelrahman, Klaus Woelk

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt pavements make up a majority of the essential transportation systems in the US. Asphalt mixtures age and degrade over time, reducing the pavement performance. Pavement performance critically depends on the aging of asphalt binder. the aging of asphalt binder during construction is traditionally modeled by rolling thin film oven (RTFO) testing, while aging during service life is modeled by pressure aging vessel (PAV) testing. Comparing these models to the aging of binders in actual pavements is limited because, to be used for current testing, binders must be separated from the pavement's aggregate by solvent extraction. Solvent extraction will, at …

Environmental Engineering 3.0: Faced With Planetary Problems, Solutions Must Scale-Up Caring, Daniel B. Oerther, Sarah Oerther, Linda A. Mccauley

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Forum papers are thought-provoking opinion pieces or essays founded in fact, sometimes containing speculation, on a civil engineering topic of general interest and relevance to the readership of the journal. The views expressed in this Forum article do not necessarily reflect the views of ASCE or the Editorial Board of the journal.

Nuclear Magnetic Resonance (Nmr) Assessment Of Bio And Crude Oil-Based Rejuvenation, Rebecca M. Herndon, Jay Balasubramanian, Magdy Abdelrahman, Klaus Woelk

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt binders in pavements lose their stability through aging and eventually fail in the field. Using nuclear magnetic resonance (NMR) to monitor the primary longitudinal relaxation time of asphalt samples and the ratio of material that carries this primary relaxation time has been shown to indicate the impact of ultraviolet (UV) radiation on the aging of asphalt pavements. Longitudinal NMR relaxation was used to investigate two types of proposed asphalt rejuvenators, a bio-oil-based rejuvenator and a crude-oil-based rejuvenator. Two different binders with the performance grades (PG) 64-22 and 76-22 were considered for their interactions with the rejuvenators. After 72 h …

Carbon Capture And Renewable Energy Policies: Could Policy Harmonization Be A Puzzle Piece To Solve The Electricity Crisis?, Mahelet G. Fikru, Fateh Belaïd, Hongyan Ma

Economics Faculty Research & Creative Works

The electricity market crisis, driven by factors such as increased energy demand, rising fuel prices, aging infrastructure, and greenhouse gas emissions, requires a multifaceted approach including the strategic implementation of Carbon Capture and Storage (CCS) technologies, which despite high costs and potential adverse impact on renewable investments, can allow the use of fossil fuels to maintain grid stability, and simultaneously lower carbon footprint. Across the world, several nations are designing financial incentives and improving regulatory frameworks to reduce barriers to the deployment of CCS. However, it is not clearly understood whether and to what extent such policy support would affect …

Influence Of Aggregate Properties On Skid Resistance Of Pavement Surface Treatments, Alireza Roshan, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Skid resistance is a critical aspect for traffic safety since it significantly influences vehicle control and minimizes the distance required for emergency braking. The surface characteristics of pavements play a pivotal role in determining skid resistance. To achieve the optimal skid resistance performance, the pavement must sustain a specific level of friction. Thus, it is advantageous to apply surface treatments in areas that require enhanced friction. This study investigates the impact of factors such as the aggregate source, size, morphological properties, and abrasion levels on the skid resistance and frictional characteristics of a high-friction surface treatment (HFST). A complete investigation …

The Effectiveness Of Waste Tire Pyrolysis Oils (Wtpos) As Rejuvenating Agents For Asphalt Materials, Ahmed S. El-Ashwah, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The continuous increase in solid waste materials, such as waste tires, underscores the critical importance of recycling them to mitigate environmental impact and promote sustainable resource management. This research study evaluated the effectiveness of utilizing waste tire pyrolysis oils (WTPOs) as recycling agents for asphalt materials. The chemical composition and thermal behavior of WTPO were analyzed using Fourier transform infrared (FT-IR) spectroscopy and thermogravimetric analysis (TGA). Mechanically, the prepared WTPO binders were assessed by measuring dynamic viscosity and changes in high- and intermediate-temperature performance grades. Additionally, the cracking susceptibility of the binders was evaluated using the Glover-Rowe (G-R) parameter. The …

Predicting Flexural-Creep Stiffness In Bending Beam Rheometer (Bbr) Experiments Using Advanced Super Learner Machine Learning Techniques, Alireza Roshan, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

BBR test is commonly used to assess the low-temperature performance grade (PG) of asphalt binders, with the flexural-creep stiffness being a critical parameter calculated through this test. However, it has notable limitations that demand attention. The significant amount of asphalt binder needed for test specimens increases costs and resource consumption. Additionally, the complex and time-consuming specimen preparation process hinders testing efficiency and introduces result variability, affecting the accuracy and reliability of PG determinations. In recent years, machine learning (ML) has emerged as a promising substitute for predicting various engineering values. In this study, the primary focus was on harnessing super …

Using Virtual Reality Technologies In Built Environment Education, Rebekah Floyd, Kayla Walters, Stuart Werner Baur

Undergraduate Research Conference at Missouri S&T

Virtual reality (VR) offers transformative potential in built environment education, including human-made surroundings like buildings and infrastructure. This review explores VR's benefits, challenges, and trends in this field. VR fosters immersive learning, allowing students to explore architectural designs and urban planning scenarios. It provides hands-on experiences, enhancing spatial understanding and critical thinking. Simulations enable safe experimentation with design ideas and construction techniques without the real-life limitations or risk holding students back. However, challenges include high costs, technical limitations, and the need for educator training. Ensuring accessibility for all students is crucial. Despite challenges, VR's potential to revolutionize built environment education …

Utilizing Ensemble Learning In The Classifications Of Ductile And Brittle Failure Modes Of Uhpc Strengthened Rc Members, Woubishet Zewdu Taffese, Yanping Zhu, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study aims to achieve the swift and precise classification of ductile and brittle failure modes in flexural reinforced concrete (RC) members, specifically those with tension sides strengthened by ultrahigh performance concrete (UHPC). Employing six ensemble learning techniques—Bagging, Random Forest, AdaBoost, Gradient Boosting, XGBoost, and LightGBM—the authors utilize a comprehensive dataset comprising 14 features, which include manually labeled failure modes obtain from load–deflection curves. The model training spans four scenarios, varying in the inclusion or exclusion of features describing the cross-sectional area of RC members and moment resistance. XGBoost emerges as the most effective classifier, achieving an impressive 84% accuracy …