Civil Engineering Commons^™

Does The Ite Trip Generation Manual Overestimate The Trip Generation Of Stores In Northeast Ohio?, Shawn Monahan

Williams Honors College, Honors Research Projects

This project will examine the use of the Trip Generation Manual to estimate the number of 'trips' per average weekday. A trip is defined as a vehicular movement from one location to another. The Trip Generation Manual will examine the estimated number of trips generated for local discount superstores in the Northeast Region of Ohio. Surveys were completed for local data, supplemented with a vehicle occupancy rate sample. This will provide a baseline that the Trip Generation Manual will be compared to.

Evaluations Of Frp Composite Coupons Under Impact And Puncture, Lekhnath Bhandari

Graduate Theses, Dissertations, and Problem Reports (ETD)

Evaluations of FRP Composite Coupons Under Impact and Puncture

Lekhnath Bhandari

Railroad tank cars are the main mode of transportation for carrying flammable liquids and other hazardous materials, in any mode of ground transportation system. These tank cars, if punctured during derailments may explode releasing large amounts of hazardous materials and posing serious threats to human life and leading to economic losses. To minimize such catastrophes, in 2015, United States Department of Transportation (USDOT) proposed to improve the thermal and puncture performances of these tank cars and introduced two new design specifications: DOT-117 and DOT-117R. Tank cars with 9/16 inches …

Nondestructive Evaluation Of Structural Defects In Concrete Slabs, Ehsanul Kabir

College of Graduate Studies: Theses & Dissertations

Nondestructive testing (NDT) is a reliable method for determining the structural integrity of new and old construction and understanding the condition of structural defects. It is widely acknowledged that the interpretation of nondestructive evaluation (NDE) has a significant impact on the reliability and consistency of this technology. However, NDT data acquisition remains subjective and heavily dependent on the operator’s knowledge and expertise. As a result, there are still issues to be resolved regarding the imaging and diagnostic procedures for NDT-based concrete inspection. NDT methods such as ground penetrating radar (GPR), and impact-echo (IE), have been extensively used to inspect concrete …

Multiscale Evaluation Of The Effect Of Deicing Agents And Environmental Conditions On The Performance Of Asphalt Pavements In Cold Regions, Maryam Mihandoust

Electronic Theses and Dissertations

No abstract provided.

An Analysis Of The Effect Of Temperature On Asphalt Paving In South Dakota, S M Rahat Rashedi

Electronic Theses and Dissertations

Temperature is an important parameter to consider for asphalt paving since this work is generally susceptible to weather due to outdoor construction. The South Dakota Department of Transportation (SDDOT) developed working day weather charts in 1998 to address the expected adverse weather days. This thesis investigated the effect of temperature on adverse weather days for asphalt paving and compared them to the value reported in the 1998 SDDOT study. Moreover, the thesis also examined how closely the maximum temperature data from project sites' weekly progress reports (WPR) matched the data from the closest weather stations. When the maximum temperature (TMAX) …

Predictions Of The Dynamic Complex Modulus Of Non-Conventional Asphalt Concrete Using Machine Learning Techniques, Annie Benson

College of Graduate Studies: Theses & Dissertations

The complex dynamic modulus (|E*|) is a characterization property that defines the stiffness of an asphalt mixture. The dynamic modulus can be found through lab testing or predictions. Since lab testing can be time-consuming and expensive, the prediction method can be used as an alternative method. While a statistical method has been traditionally used for the |E*| prediction such as the Witczak’s predictive equations, machine learning (ML) is recently emerging as an alternative way that |E*| predictions can be made. This research attempted to predict the |E*| using several ML techniques including linear regression, support vector machines (SVM), decision trees, …

Implementation Of Ground Penetrating Radar (Gpr) And Complementary Non-Destructive Testing On Concrete Structures, Macy Spears

College of Graduate Studies: Theses & Dissertations

This study analyzes the application and practicality of different non-destructive testing (NDT) methods for the inspection of reinforced concrete. There are two studies discussed in this paper. The first one is a laboratory investigation, utilizing ground penetrating radar (GPR) on concrete slabs that consisted of simulated defects to mimic those found in real concrete structures. This served as a preliminary experiment to verify the GPR data with the design of the slabs. The following study describes a field investigation on an old bridge deck, which involved multiple testing methods. The techniques used were GPR, impact echo (IE), ultrasonic pulse echo …

Powering Electric Vehicles: Are We Ready?, Christian Yoder

Williams Honors College, Honors Research Projects

This project will investigate typical power grids and the impacts that electric vehicles have on them. Electric vehicles are rapidly growing in popularity and much of the world is promising to make the switch from combustion engines to EVs. Electric vehicles demand a large amount of electricity. With fast charging becoming available, it is worth asking if the current electrical infrastructure can handle the increase in demand. After talking to a source at FirstEnergy, it seems large electric companies are well aware of areas in need of adjustment and are moving accordingly.

An Analysis Of The Influence Of Speed On Fatal Accidents In Ohio, Megan Johnson

Williams Honors College, Honors Research Projects

Through data collected by NHTSA and FARS, Ohio crash data resulting in fatalities were analyzed through four different breakdowns to determine variables correlating to the fatalities. The breakdowns include dividing data from overall Ohio data, reports involving speeding, then from there to single-vehicle crashes. That data was divided down to only include male drivers and then finally only motorcycles. This data was analyzed as it was broken down to find trends with each category. Through these analyses, the trends were developed to suggest recommendations to implement through education and laws to help reduce the number of crashes resulting in fatalities.

Exploring Of User Experience And Evaluating Mobility Benefits Of Micromobility Systems And Golf Carts: Case Study Of Florida, Kabhabhela C. Bukuru

UNF Graduate Theses and Dissertations

Micromobility devices and golf carts (GCs)/Low speed vehicles(LSVs) are urban transportation solutions that provide short-distance travel options, including first- and last-mile trips. They mostly operate at speeds of 15 mi/h to 35 mi/h. The micromobility devices include e-scooters and e-bikes. The micromobility devices and golfcarts are increasing rapidly in the transportation system, and thus, it is necessary to explore their various factors. The objective of this study is to explore the user experience and evaluate the mobility benefits of the micromobility systems in Florida.

A survey was conducted in various cities with a substantial user base of micromobility devices. Various …

Improving Building Cfd Peak Pressure Computation Using Les With A Focus On Inflow Turbulence Methods And Grid Spacing Size., Zahra Mansouri

Graduate Theses and Dissertations

Structural failures by extreme winds often leads to economic losses and even deaths. Proper design of buildings requires accurate estimation of wind loads to prevent structural damage. Using routine guidelines generally leads to the underestimation of buildings’ peak pressures, in which most failures occur. To estimate wind loads more accurately three different methods (i.e., field measurement, wind tunnel (WT), and computational fluid dynamics (CFD)) are in use. A well-validated CFD provides more flow field details at lower costs compared to field measurements and WT. As strong winds are extremely turbulent, the effects of turbulence in wind should be incorporated into …

Use Of Harsh-Braking Data From Connected Vehicles As A Surrogate Safety Measure, Nathaniel Patrick Edelmann

Boise State University Theses and Dissertations

Traffic safety may be analyzed with the use of surrogate safety measures, measures of safety that do not incorporate collision data but rather rely on the concept of traffic conflicts. Use of these measures provides several benefits over use of more traditional analysis methods with historical crash data. Surrogate measures eliminate the need to wait for crashes to occur to conduct a safety analysis. The amount of time required for enough crash data to accumulate can be significant, delaying safety analyses. Similarly, these measures allow for safety analysis to be conducted prior to crashes occurring, potentially calling attention to hazardous …

Data-Driven Analysis For Facility Management In Higher Education Institution, Ashish Kumar Pampana, Jungho Jeon, Soojin Yoon, Theodore J. Weidner, Makarand Hastak

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Planned Preventive Maintenance (PPM) and Unplanned Maintenance (UPM) are the most common types of facility maintenance. This paper analyzes current trends and status of Facility Management (FM) practice at higher education institutions by proposing a systematic data-driven methodology using Natural Language Process (NLP) approaches, statistical analysis, risk-profile analysis, and outlier analysis. This study utilizes a descriptive database entitled "Facility Management Unified Classification Database (FMUCD)" to conduct the systematic data-driven analyses. The 5-year data from 2015 to 2019 was collected from eight universities in North America. A preprocessing step included but was not limited to identifying common data attributes, cleaning noisy …

Development Of A Smartphone Application As An Asset To Pavement Management Engineers, Smartp3m, Damien Stephens

Electrical Engineering Theses

An application specific multi-platform smartphone application can utilize on-board accelerometer, gyroscope, and GPS sensors, along with software derived signals from the same sensors, to sample vibrational and geolocation datasets to capture pavement distresses such as potholes when mounted in a standardized configuration in a vehicle. Several observations were made with regard to the signals obtained from the accelerometer, gyroscope, and GPS sensors, and it was determined that the raw sensor outputs are capable of sampling statistically significant datasets which can be used to distinguish pavement distress from normal driving conditions. Furthermore, an approximate sensor noise margin is established, and a …

Study On Road Performance Of High Content Phosphogypsum Cement Stabilized Red Clay, Yang Dezhong, Chen Kaisheng, Li Qiang

Journal of China & Foreign Highway

In response to the waste of phosphogypsum resources and engineering characteristics of red clay, by referring to the mix ratio design method of fly ash mixtures, 18 sets of mix ratio samples were set up indoors. By conducting compaction tests, seven-day unconfined compression strength tests, water-stability tests, and CBR tests, exploratory research was conducted on the road performance of high content phosphogypsum stabilized red clay. The results indicate that the optimal water content of high content phosphogypsum stabilized red clay is lower than that of plain red clay. The seven-day unconfined compression strength is 1.8-3.7 times that of plain red …

Effect Of Varying Amounts Of Sandstone On The Performance Of Asphalt Mixtures In Arkansas, David Murphy

Graduate Theses and Dissertations

There are many different species and subspecies of aggregate used across the state of Arkansas, and the rest the country. However, it cannot be presumed that the amount and type of these aggregates will be compatible with the commonly used asphalt binder of an area; this can lead to performance issues and premature pavement damage. It has been suspected in Arkansas that an excessive amount of sandstone in asphalt mixtures may be a culprit of some of these premature pavement damage issues, especially regarding the moisture susceptibility of a pavement. This study aimed to analyze the performance effects of using …

Influence Of Specimen Geometry And Anisotropy On Dynamic Modulus Of Asphalt Mixes In South Carolina, Srinivasan Nagarajan

All Dissertations

The objective of this study was to characterize the variability of dynamic modulus of asphalt mixes in South Carolina on the basis of geometry and anisotropy. High priority mixes Surface Type B, and C; Intermediate Type B and C and Base Type A from three different days of production were collected from seven different contractors each having a different aggregate source and the dynamic modulus was measured using the Asphalt Mixture Performance Tester (AMPT) at temperatures of 40, 70, 100 and 130℉ (4.4, 21.1, 37.8, and 54.4℃) and at frequencies of 25, 10, 5, 1, 0.5, and 0.1 Hz. One-way …

Crack Control And Bond Performance Of Alternative Coated Reinforcements In Concrete, Sachin Sreedhara

All Dissertations

Concrete cracking in structures is a ubiquitous problem which can lead to the deterioration of the structure. Other than affecting the strength aspect of a structure, cracking impacts the serviceability criteria as well. Although cracking phenomenon in any structure is highly inevitable, it has to be minimized in order to maintain a structure’s life effectively. Cracking in reinforced concrete structures is related to the bond strength developed between the bar and the concrete. It also depends on an ability of the bar to resist the stresses due to shrinkage to minimize the crack. Another important aspect is the resistance offered …

Autonomous Vehicles On The Smart Roads: Challenges And Potentials, Laura Cristancho, Baleki Campbell, Mahyar Amirgholy

The Kennesaw Journal of Undergraduate Research

Self-driving vehicles and smart roads are not new concepts. These ideas have been discussed for many years but for much of this time, the required technology was not available to make them a reality. Just recently has our technology caught up to our ideas and we are beginning to see progress towards the realization of the automated highway system. As the transition to a complete automated system is still in progress, this leaves many questions that still need to be answered as well as allowing for novel solutions to be presented. Using modern research papers to formulate a sound basis …

Measuring Accessibility For Pedestrians, Bicyclists, And Transit Riders To Grocery Stores In The Excelsior/Outer Mission Neighborhoods Of San Francisco, Alexandra Lee-Gardner

Master's Theses

Grocery stores are an important amenity in neighborhoods and access to grocery stores is important for health and well-being. While grocery store accessibility is a popular topic of research, studies measuring access for pedestrians, bicyclists, and transit riders are extremely rare. When a new store opened in the Excelsior/Outer Mission districts of San Francisco on a street lacking basic infrastructure for pedestrians, bicyclists, and transit riders, the importance of this study became apparent. The Excelsior/Outer Mission neighborhood has a shocking number of collisions (over 1,100 between 2015 and 2019), elevated levels of walking, biking, and transit ridership, and minimal safe …

Refining Particle Size Specification For Asphalt Emulsion, Pedro Luis Diaz Romero

Graduate Theses and Dissertations

Pavements begin to deteriorate as soon as they are constructed, and traffic is released. The rate at which a pavement deteriorates depends on the material quality, the environment, and the loads carried. To properly preserve pavements and extend their life, various pavement preservation treatments are used. For flexible pavements, a considerable number of these treatments use asphalt emulsion (which are refer to simply emulsions from here on). Emulsions are classified based on their particle charge and reactivity. Emulsions used in chip seals are usually of rapid set reactivity and are classified based on tests over fifty years old.

It has …

Digitalization Of Construction Project Requirements Using Natural Language Processing (Nlp) Techniques, Fahad Ul Hassan

All Dissertations

Contract documents are a critical legal component of a construction project that specify all wishes and expectations of the owner toward the design, construction, and handover of a project. A single contract package, especially of a design-build (DB) project, comprises hundreds of documents including thousands of requirements. Precise comprehension and management of the requirements are critical to ensure that all important explicit and implicit requirements of the project scope are captured, managed, and completed. Since requirements are mainly written in a natural human language, the current manual methods impose a significant burden on practitioners to process and restructure them into …

Determining Earthquake Impacts On Arkansas' Roadway Network: An Application Of Hazus., Simon Rothwell

Civil Engineering Undergraduate Honors Theses

Natural hazards are a dangerous and unpredictable aspect of life on earth. They can cause devastating damage to our surroundings that makes movement of people, goods, and emergency services difficult. There is a need to plan for these disasters to ensure that damages to our infrastructure and people are minimized. It can be difficult for planners to determine which parts of a roadway network are most vulnerable to a specific disaster and what their impact on the rest of the network may be. This thesis uses a nationally available natural disaster estimation tool developed by FEMA called “Hazus” (FEMA, 2020). …

Comparing The Stiffness Of Cold In-Place Recycled Asphalt Pavement To Hot Mix Asphalt: Determining The Reproducibility Of The Stiffness Rebound Test, Tanner Turben

Civil Engineering Undergraduate Honors Theses

The Stiffness Raveling Mechanism Test (SRMT) was originally developed as an indirect measure of pavement stiffness to determine a pavement’s tendency to ravel, a type of damage. Regarding rehabilitation of existing roadways by Full Depth Reclamation (FDR) Cold In-Place Recycling (CIR), concern of field repeatability was expressed (Hill & Braham, 2016).

An analysis of lab-compacted samples of CIR and Hot Mix Asphalt (HMA) was performed to determine if the results could be reproduced between CIR and HMA. Additionally, the experiment observed the effects of percent air voids, temperature, and moisture conditioning on CIR and HMA. Three samples were prepared for …

Community Transportation Needs And Willingness To Use Shared Micromobility: A Case Study Of Fort Smith, Arkansas, Anthony Michael Kammerer

Civil Engineering Undergraduate Honors Theses

Shared micromobility is utilized in “targeted service areas with the usage generally intended for short trips such as "first- and last-mile" connections to complete trips made via other modes, including transit” (Price et al., 2021). In the United States, this practice has especially taken off with the implementation of sharing-based systems. This is evidenced by ridership numbers in the United States growing from 84 million riders nationwide in 2018 to 136 million riders in 2019 (NACTO, 2020). Users often use their smart phone or another similar device to unlock the vehicle after paying a fee on the device through their …

A Case Study Of Protecting Bridges Against Overheight Vehicles, Aly Mousaad Aly, Marc Hoffmann

Faculty Publications

Most transportation departments have recognized and developed procedures to address the ever-increasing weights of trucks traveling on bridges in service today. Transportation agencies also recognize the issues with overheight vehicles’ collisions with bridges, but few stakeholders have definitive countermeasures. Bridges are becoming more vulnerable to collisions from overheight vehicles. The exact response under lateral impact force is difficult to predict. In this paper, nonlinear impact analysis shows that the degree of deformation recorded through the modeling of the unprotected vehicle-girder model provides realistic results compared to the observation from the US-61 bridge overheight vehicle impact. The predicted displacements are 0.229 …

A New Generation Of Open-Graded Friction Course For Enhanced Durability And Functionality, Hossam Abohamer

LSU Doctoral Dissertations

This study aims at (1) enhancing Open Graded Friction Course (OGFC) mixes durability using additives and other by-products; (2) investigating the impacts of selected factors on OGFC pavements seepage characteristics; (3) developing a quantitative tool to model the deterioration in OGFC pavements functional performance; and (4) developing new guidelines of Air Void (AV) content for OGFC for optimum functionality and durability. For the durability objective, eight mixes were prepared with a PG 76-22 binder and two sources of aggregate (i.e., # 78 limestone and # 67 sandstone). Three Warm Mix Additives (WMA), one by-product (i.e., crumb rubber [CR]), and two …

Effects Of Emergency Vehicle Warning Lighting System Characteristics On Driver Perception And Behavior, Emily Hiebner

Doctoral Dissertations and Master's Theses

Secondary crashes, including struck-by incidents are a leading cause of line-of-duty deaths among emergency responders, such as firefighters, law enforcement officers, and emergency medical service providers. The introduction of light emitting diode (LED) sources and advanced lighting control systems, provides a wide range of options for emergency lighting configurations. This study investigated the impact of lighting color, intensity, modulation, and flash rate on driver behavior while traversing a traffic incident scene at night. The impact of retroreflective chevron markings in combination with lighting configurations, as well as the measurement of “moth-to-flame” effects of emergency lighting on drivers was also investigated. …

Streamlining Project Development Through Planning & Environmental Linkages, Karen Hadley, Brett Lackey

Purdue Road School

As transportation agencies continue to explore ways to be more efficient in the project development process, they are embracing integrated methodologies like planning and environmental linkages. This tool is practical, yet highly effective and inclusive, and teams across the country are experiencing its value. This presentation will highlight a variety of use cases, discuss lessons learned and best practices, and specifically address how planning and environmental linkages can be applied in Indiana and the Midwest.

Big Data Applications: Public Involvement Tools For Public Involvement, Amy L. Livingston, Houssam Ghandour

Purdue Road School

Using big data to better understand origin-destination and regional travel patterns is critical to project development. Tools such as passive geographically based data lead to improved definitions for traffic analysis zones (TAZs), which, in turn, help inform public involvement plans for a more targeted approach and improved equity. This presentation will highlight future planning applications in Indiana and other case examples where we have used big data to aid the plan development of public and stakeholder engagement.