Civil Engineering Commons^™

Shaft Torsional Vibration Response Of Vertical Axis Ocean Current Turbine Model Due To Torque Excitation, Adi Wirawan Husodo, I Ketut Aria Pria Utama, I Made Ariana

Makara Journal of Technology

Shaft Torsional Vibration Response of Vertical Axis Ocean Current Turbine Model Due to Torque Excitation. The current research aimed to study the torsional vibration response of Vertical Axis Ocean Current Turbine due to randomly torque excitation pattern, owing to the variety of ocean current velocity. The turbine model is composed of 3 aluminum blades of NACA 0018 connected to steel shaft. Turbine dimensions are 10 cm of chord, 1.8 cm of chamber and 100 cm of span. The variation of ocean current velocity is 0.5 m/s, 1.0 m/s, 1.5 m/s, 2.0 m/s, 2.5 m/s and 3.0 m/s. The Model has …

Elimination Of Deck Joints Using A Corrosion Resistant Frp Approach, Ashok Reddy Aleti

Doctoral Dissertations

The research presented herein describes the development of durable link slabs for jointless bridge decks based on using FRP grid for reinforcement. Specifically, the ductility of the FRP material was utilized to accommodate bridge deck deformations imposed by girder deflection, temperature variations, and concrete shrinkage. It would also provide a solution to a number of deterioration problems associated with bridge deck joints.

The design concept of the link slabs was then examined to form the basis of design for FRP grid link slabs. Improved design of FRP grid link slab/concrete deck slab interface was confirmed in the numerical analysis. The …

Mitigation Of Chloride And Sulfate Based Corrosion In Reinforced Concrete Via Electrokinetic Nanoparticle Treatment, Kunal Kupwade-Patil

Doctoral Dissertations

Concrete is a porous material which is susceptible to the migration of highly deleterious species such as chlorides and sulfates. Various external sources, including sea salt spray, direct seawater wetting, deicing salts and chlorides can contaminate reinforced concrete. Chlorides diffuse into the capillary pores of concrete and come into contact with the reinforcement. When chloride concentration at the reinforcement exceeds a threshold level it breaks down the passive oxide layer, leading to chloride induced corrosion. The application of electrokinetics using positively charged nanoparticles for corrosion protection in reinforced concrete structures is an emerging technology. This technique involves the principle of …

Comparison Of The Properties Of Portland Cement And Portland-Limestone Cement, Alex Lyatonga Mrema

Tanzania Journal of Engineering and Technology (TJET)

A study was made in a cement factory in Dar es Salaam, Tanzania, where Ordinary Portland Cement (CEM I 42.5N) and Portland-limestone cement (PLC) which has the brand name Twiga Cement Extra (CEM II/A-L/32.5R) are produced and conforming to the Tanzania Standard TZS 727 (Part1): 2002, which is equivalent to EN 197 published by the committee for European normalization (CEN). A comparison was made between the two types of cements in terms of physical, chemical and mechanical properties. It was found out that they all complied with the standards, that there was no significant difference in their setting times and …

The Effect Of Service Installations On Structural Integrity Of Slabs In Buildings, Ladislaus Lwambuka

Tanzania Journal of Engineering and Technology (TJET)

In building construction industry service installations, usually housed in conduit pipes, are commonly mounted inside reinforced concrete structural elements. This practice is adopted to attain aesthetical outlook at both interior and exterior surfaces of the buildings. Depending on the extent of service installations, the cross sectional area of the load bearing structural member is substantially reduced. However, the current structural design guidelines have no provision to accommodate the extent to which the existence of conduit pipes impairs the load bearing capacity of the structural element though reduced cross sectional area. This study has attempted to address this gap in structural …

Residential Energy Performance Metrics, Christopher Wright, Stuart Werner Baur, Katie Grantham, Robert B. Stone, Scott Erwin Grasman

Engineering Management and Systems Engineering Faculty Research & Creative Works

Techniques for residential energy monitoring are an emerging field that is currently drawing significant attention. This paper is a description of the current efforts to monitor and compare the performance of three solar powered homes built at Missouri University of Science and Technology. The homes are outfitted with an array of sensors and a data logger system to measure and record electricity production, system energy use, internal home temperature and humidity, hot water production, and exterior ambient conditions the houses are experiencing. Data is being collected to measure the performance of the houses, compare to energy modeling programs, design and …

A Concise Model Of 3x7 Wire Rope Used In Cable Guardrail Systems, Cody S. Stolle

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Wire rope is a versatile, flexible, high-strength member that is used in many mechanical systems. However, due to the complexity of wire rope, analytical investigations have been relatively limited. Previous attempts to create simplified models of wire rope were not validated with physical testing and used a cumbersome beam-and-shell or beam-and-solid method for simulating the wire rope. An improved LS-DYNA model of 19-mm diameter 3x7 wire rope commonly used in roadside cable guardrail installations has been developed. A Belytschko-Schwer beam element was selected along with material *MAT_166. Since wire rope displays internal damping due to friction of strands and wires, …

Ontology-Based Automatic Classification For News Articles In Indonesian Language, Prajna Wira Basnur, Dana Indra Sensuse

Makara Journal of Technology

Ontology-Based Automatic Classification for News Articles in Indonesian Language. Searching specific information will be difficult if relying only on query. Choosing less specific queries will result in a lot of irrelevant information fetched by the system. One of the most successful ways to overcome this problem is to perform document classification based on the topic. There are many methods that can be used to conduct such a classification, such as using statistical and machine learning approaches. However, those document classification methods require training the data or learning the documents. In this study, the authors attempted to classify documents using a …

A Simple Technique For Surface Area Determination Through Supercritical Co2 Adsorption, Mahmud Sudibandriyo

Makara Journal of Technology

The measurement of specific surface area of porous materials has long been important in physical sciences and is currently growing in importance in applied and environmental science. Numerous systems have been developed for surface area measurement by gas adsorption. Commercial systems are available which can measure a wide range of absolute surface area with relative ease. However, their cost is often prohibitive. In this study, an inexpensive apparatus for surface area measurement has been set up to be used for measuring supercritical adsorption of CO2. The Ono-Kondo Lattice model was used to represent the adsorption isotherm and to determine the …

Fishing Catch And Catch Rate Assesment Of Mini Trawl, Trapnet And Setnet Fisheries, Muhammad Firdaus

Makara Journal of Technology

Fishing Catch and Catch Rate Assesment of Mini Trawl, Trapnet and Setnet Fisheries. This paper is aimed at assessing fishing catch and catch rate of the dragged gear on shrimp, trapnet, and setnet fisheries in Tarakan. The catch and effort data (number and species) and the fishing time of captured units were used in this qualitative analysis of fishing catch and catch rate to describe catch composition and catch rate from three catch fishery units in Tarakan. The result of the research shows that in the catching operation the dragged gear on shrimp has two main catch targets, which are …

Particle Filter With Binary Gaussian Weighting And Support Vector Machine For Human Pose Interpretation, Indah Agustien, Muhammad Rahmat Widyanto, Sukmawati Nur Endah, Tarzan Basaruddin

Makara Journal of Technology

This paper proposes human pose interpretation using particle filter (PF) with Binary Gaussian Weighting and support vector machine (SVM). In the proposed system, particle filter is used to track a human object, then this human object is skeletonized using thinning algorithm and classified using SVM. The classification is to identify human pose, whether it is normal or abnormal behavior. Here particle filter is modified through weight calculation using Gaussian distribution to reduce the computational time. The modified particle filter consists of four main phases. First, particles are generated to predict target’s location. Second, the weight of certain particles is calculated …

Maintenance Activity Planning By Reability Centered Maintenance Ii Method, Rachmad Hidayat, Nachnul Ansori, Ali Imron

Makara Journal of Technology

Maintenance Activity Planning by Reability Centered Maintenance II Method. This research discusses maintenance activity planning using the RCM II method to evaluate failure function risk on compresor screw. The calculation of maintenance time is performed by considering maintenance and repair costs. The risk evaluation result with RPN shows that the critical component that needs to get the main priority in applying maintenance on compresor screw is function disorder on timeworn piston and on the broken outgoing air sponge’s filter that receives RPN 45. The optimum maintenance time calculation is applied on components that undergo scheduled restoration and scheduled discard task …

Software Design Of Mobile Antenna For Auto Satellite Tracking Using Modem Correction And Elevation Azimuth Method, Djamhari Sirat, Muhamad Asvial, Arman Djohan Diponegoro, Himawan Sidharta

Makara Journal of Technology

Software Design of Mobile Antenna for Auto Satellite Tracking Using Modem Correction and Elevation Azimuth Method. Pointing accuracy is important in satellite communication. Because the satellite’s distance to the surface of the earth's satellite is so huge, 1 degree of pointing error will make the antenna unable to send data to satellites. To overcome this, the auto-tracking satellite controller is made. This system uses a microcontroller as the controller, with the GPS as the location indicator of the antenna, a digital compass as the beginning of antenna pointing direction, a rotary encoder as azimuth and elevation censor, and a modem …

Petroleum Degradation In Soil By Thermophilic Bacteria With Biopile Reactor, Astri Nugroho, Edison Effendi, Yulius Karonta

Makara Journal of Technology

Crude oil degradation has been carried out using biopile reactor in total petroleum hydrocarbon (TPH) concentration of 5%, 10% and 15%. The thermophilic microorganisms used from isolation result and identification are Aeromonas salmonicida, Bacillus pantothenticus, and Stenotrophomonas maltophilia. The biodegradation of biopile reactor is done by various concentrations of TPH, total plate count (TPC), and volatile suspended solid (VSS) per day for 30 days. The biodegradation of kinetic parameter calculated consists of μ, μm, Y, Yt, Yobs, Kd, Ks from TPH concentration decision, and TPC and VSS in every microorganism with t (observation time) of 0 hour to 168 hours. …

Ergonomic Analysis Of Ui’S Bicyclesusing Posture Evaluation Index (Pei) Method In Virtual Environment, Erlinda Muslim, Boy Nurtjahyo, Zulkarnain Zulkarnain, Liza Afrinotha

Makara Journal of Technology

Ergonomic Analysis of UI’s Bicycles Using Posture Evaluation Index (PEI) Method in Virtual Environment. This research was conducted to study the ergonomic aspect of University of Indonesia’s bicycles in virtual environment. Software Jack 6.0 was used to analyze it. PEI was used as an approach that integrated the results of three methods: lower back analysis (LBA), ovako working posture analysis (OWAS), and rapid upper limb assessment (RULA). The research objective is to evaluate the existing design of University of Indonesia’s bicycles and to determine the most ergonomic redesign which concerns handlebar height and saddle height modification. The result showed that …

Skewed Bridge Behaviors: Experimental, Analytical, And Numerical Analysis, Bang-Jo Chun

Wayne State University Dissertations

In the US, nearly 33.5% of highway bridges are skewed. In the past, these skewed bridges have been analyzed as straight bridges. Nevertheless, there exists an extensive literature indicating the mechanical behavior of skewed bridges being quite different from their straight counterparts. In this thesis, to better understand the behavior of skewed bridges, experimental, numerical, and analytical researches have been conducted. The analytical method proposed here is the first of its kind in the skewed bridge research, and is expected to aid the bridge engineers with their design.

First, a three dimensional finite element analysis (FEA) model was developed and …

Effects Of Ph On Calcium Carbonate Precipitation Under Magnetic Field, Nelson Saksono, Yuliusman Yuliusman, Setijo Bismo, Roekmijati W. Soemantojo, Azwar Manaf

Makara Journal of Technology

Magnetic field effect on CaCO3 precipitation is the key parameter in evaluating the effectiveness of Anti-scale Magnetic Treatment (AMT). The purpose of this study was to investigate magnetic fields influence on CaCO3 precipitation in high and low super-saturated CaCO3 solution by varied pH CaCO3 solution using circulation flow fluid system. The observation results in the high super saturated solution (pH 8.5) showed the increase of precipited CaCO3 in magnetized solutions compared to those in non-magnetic solution during circulation process. In the low super-saturated CaCO3 solution (pH 6.4) it was found that magnetic treatment increased CaCO3 precipitation after circulation process. In …

Intermetallic Cu3sn Phase Layer On Electrode’S Tip Of Galvanized Resistance Spot Welding, Muhammad Anis, Aulia Irsyadi, Deni Ferdian

Makara Journal of Technology

Intermetallic Cu3Sn Phase Layer on Electrode’s Tip of Galvanized Resistance Spot Welding. A resistance spot welding method is commonly used in automotive industries application. In a resistance spot welding method, the copper electrode has a significant role as an electric current carrier for joining thin metal sheet. This research was focused on studying the effect of tin layer at the electrode tip for joining galvanized steel sheet. The main variable of this research is in the thickness of the intermetallic Cu3Sn layer. The result showed that the introduction of tin layer less than 1 μm in thickness on the electrode …

Semi-Automatic Image Segmentation For Volumetric Visualization Of Pelvis Ct Scan-Images, Suprijanto Suprijanto, Farida I. Muchtadi, Irwan Setiawan

Makara Journal of Technology

Semi-Automatic Image Segmentation for Volumetric Visualization of Pelvis CT Scan-Images. The current development of computerized tomography (CT) has enable us to obtain cross sectional image using multi slicing techniques in an order of few seconds. The obtained images represent several tissue structures on cross section slice being imaged. One challenge to help diagnosis using CT images is extracting an anatomic structure of interest using a method of image segmentation and volumetric visualization with the assistance of computers. In case of volumetric visualization of pelvis bones extracted from multi-slice CT images, whole images which are containing part of pelvis bone structures …

Implementation Of Six Sigma Method To Maintain The Quality Of Construction Projects, Yusuf Latief, Retyaning Puji Utami

Makara Journal of Technology

Implementation of Six Sigma Method to Maintain The Quality of Construction Projects. Six sigma (6-sigma) is a method that widely developed in the world, especially in manufacturing industry to decrease failures in achieving good quality in construction projects. The objective of this research is to explore the existing condition of quality management and the aplication of 6-sigma method in maintaining quality of construction projects. Structured interviews to experienced experts and people who were recommended by their companies were conducted. Non-parametric analysis using frequencies distribution procedures were used for analysis. The result shows that existing condition in quality management of construction …

Simple Ml Detector For Multiple Antennas Communication System, Ahmad Taqwa, Soegijardjo Soegijoko, Sugihartono Sugihartono, Suhartono Tjondronegoro

Makara Journal of Technology

Simple ML Detector for Multiple Antennas Communication System. In order to support providing broadband wireless communication services against limited and expensive frequency bandwidth, we have to develop a bandwidth efficient system. Therefore, in this paper we propose a closed-loop MIMO (Multiple-Input-Multiple-Output) system using ML (Maximum Likelihood) detector to optimize capacity and to increase system performance. What is especially exciting about the benefits offered by MIMO is that a high capacity and performance can be attained without additional frequency-spectral resource. The grand scenario of this concept is the attained advantages of transformation matrices having capability to allocate transmitted signals power suit …

Mechanical Properties Of Ramie Fiber Reinforced Epoxy Lamina Composite For Socket Prosthesis, Tresna P. Soemardi, Widjajalaksmi Kusumaningsih, Agustinus Purna Irawan

Makara Journal of Technology

Mechanical properties of ramie fiber reinforced epoxy lamina composite for socket prosthesis. This paper presents an investigation into the application of natural fiber composite especially ramie fiber reinforced epoxy lamina composite for socket prosthesis. The research focuses on the tensile and shear strength from ramie fiber reinforced epoxy lamina composite which will be applied as alternative material for socket prosthesis. The research based on American Society for Testing Material (ASTM) standard D 3039/D 3039M for tensile strength and ASTM D 4255/D 4255M-83 for shear strength. The ramie fiber applied is a fiber continue 100 % Ne14'S with Epoxy Resin Bakelite …

Potency Of Thermoelectric Generator For Hybrid Vehicle, Nandy Putra, Raldi Artono Koestoer, Mohammad Adhitya, Ardian Roekettino, Bayu Trianto

Makara Journal of Technology

Potency of Thermoelectric Generator for Hybrid Vehicle. Thermoelectric Generator (TEG) has been known as electricity generation for many years. If the temperature difference occurred between two difference semi conductor materials, the current will flow in the material and produced difference voltage. This principle is known as Seebeck effect that is the opposite of Peltier effect Thermoelectric Cooling (TEC). This research was conducted to test the potential of electric source from twelve peltier modules. Then, these thermoelectric generators were applied in hybrid car by using waste heat from the combustion engine. The experiment has been conducted with variations of peltier module …

Performance Of Hollow Fiber Membrane Gas-Liquid Contactors To Absorb Co2 Using Diethanolamine (Dea) As A Solvent, Sutrasno Kartohardjono, Pan Ade Nata, Eko Prasetio, Yuliusman Yuliusman

Makara Journal of Technology

This study uses DEA solution to absorb CO2 from the gas flow through the hollow fiber membrane contactors. This study aims to evaluate the performance of hollow fiber membrane contactors to absorb CO2 gas using DEA solution as solvent through mass transfer and hydrodynamics studies. The use of DEA solution is to reduce the mass transfer resistance in the liquid phase, and on the other side, the large contact area of the membrane surface can cover the disadvantage of membrane contactors; additional mass transfer resistance in the membrane phase. During experiments, CO2 feed flows through the fiber lumens, while the …

Towards The Efficient Probabilistic Characterization Of Tropical Cyclone-Generated Storm Surge Hazards Under Stationary And Nonstationary Conditions, Senanu Kudjo Agbley

Civil & Environmental Engineering Theses & Dissertations

The scarcity of observations at any single location confounds the probabilistic characterization of tropical cyclone-generated storm surge hazards using annual maxima and peaks-over-threshold methods. The EST and the JPM are indirect approaches aimed at estimating the probability distribution of the response variable of interest (i.e. storm surge) using the probability distributions of predictor variables (e.g. storm size, storm intensity etc.). In the first part of this work, the relative performance of the empirical simulation technique (EST; Borgman et al., 1992) and the joint probability method (JPM; Myers, 1970) is evaluated via stochastic simulation methods. It is shown that the JPM …

Environmental Remediation Full-Scale Implementation: Back To Simple Microbial Massive Culture Approaches, Agung Dhamar Syakti, Mohamad Yani

Makara Journal of Technology

Using bioaugmentation and biostimulation approach for contaminated soil bioremediation were investigated and implemented on field scale. We combine those approaches by culturing massively the petrophilic indigenous microorganisms from chronically contaminated soil enriched by mixed manure. Through these methods, bioremediation performance revealed promising results in removing the petroleum hydrocarbons comparatively using metabolite by product such as biosurfactant, specific enzymes and other extra-cellular product which are considered as a difficult task and will impact on cost increase.

Preparation Of Radioactive Gold Nanoparticle By Neutron Activation, Rohadi Awaludin

Makara Journal of Technology

Preparation of Radioactive Gold Nanoparticle by Neutron Activation. It was reported that gold nanoparticle could be used for cancer therapy using thermal effect. It is possible to kill cancer cells using radiation of radioisotope. Study on preparation of radioactive gold by neutron activation at central irradiation position (CIP) of G.A. Siwabessy reactor with neutron flux 1.26 x 1014 neutron s-1cm-2 has been carried out. It was revealed that a radioisotop of gold (198Au) was produced by neutron activation from natural gold. Calculation results showed that 198Au with radioactivity of 0.366 Bq, 2.93 Bq, 9.90 Bq and 23.4 Bq was produced …

Induction And Conduction Electromagnetic Waves Caused By Lightning Strike On The Low Voltage Network, Reynaldo Zoro

Makara Journal of Technology

Induction and Conduction Electromagnetic Waves Caused by Lightning Strike on the Low Voltage Network. Direct and indirect lightning strikes can disturb and induce low voltage overheadlines and it can produced overvoltage due to traveling waves along the lines. This overvoltage can damage the equipments connected to it. It was recorded that there were already a lot of damages of electronic equipments and arrestesr located inside the building of Lightning Measurement Station at Mnt. Tangkuban Perahu. Most of the overvoltage which was developed on the low voltage lines were coming from indirect lightning strike nearby due to the fact that most …

Lipid Production From Microalgae As A Promising Candidate For Biodiesel Production, Arief Widjaja

Makara Journal of Technology

Recently, several strains of microalgae have been studied as they contain high lipid content capable to be converted to biodiesel. Fresh water microalgae Chlorella vulgaris studied in this research was one of the proof as it contained high triacyl glyceride which made it a potential candidate for biodiesel production. Factors responsible for good growing of microalgae such as CO2 and nitrogen concentration were investigated. It was found that total lipid content was increased after exposing to media with not enough nitrogen concentration. However, under this nitrogen depletion media, the growth rate was very slow leading to lower lipid productivity. The …

On The Performance Of Svd-Dwt Based Digital Video Watermarking Technique With Semi-Blind Detector, Tarzan Basaruddin, Della Maulidiya

Makara Journal of Technology

On the Performance of SVD-DWT Based Digital Video Watermarking Technique with Semi-Blind Detector. This paper presents a watermarking technique for digital video. The proposed scheme is developed based on the work of Ganic and Chan which took the virtue of SVD and DWT. While the previous works of Chan has the blind detector property, our attempt is to develop a scheme with semi-blind detector, by using the merit of the DWT-SDV technique proposed by Ganic which was originally applied to still image. Overall, our experimental results show that our proposed scheme has a very good imperceptibility and is reasonably robust …