Civil Engineering Commons^™

Extraction And Characterization Of Fibres From The Bark Of Ficus Nekbudu Tree, Liberato V Haule

Tanzania Journal of Engineering and Technology (TJET)

This paper investigates the extraction and characterization of fibres from the bark of the ficus nekbudu tree. The Ficus Nekbudu Fibres (FNF) was extracted from the bark by retting in water and then treatment with sodium hydroxide solution. The extracted FNF was analysed for chemical composition, physical, tensile, surface, structural and thermal stability properties. Findings on the chemical composition indicated that FNF has cellulose (49.9 %), lignin (13.4%), ash (7.1%) and water content (8.1%). From the physical investigation it was found that FNF has density (1.42 ± 0.005 g/cm3) and moisture regain (9.2 ±0.3%). From mechanical investigation it was found …

Designing A Model Of Solar Photovoltaic Water Pumping System For Off-Grid Localities In Tanzania, Imani Mruma

Tanzania Journal of Engineering and Technology (TJET)

Modeling of photovoltaic (PV) water pumping system for rural water localities is vital especially in these modern days, in Tanzania. This is due to the rise of high number of solar-powered rural water projects constructed lacking appropriate design. The fate result into poor and substandard projects delivering below expectations. Kikombo Solar Water Project situated in Dodoma; Tanzania is one among poorly designed solar project chosen as a case study to validate proposed model. The main problem of Kikombo project is unsatisfactory amount of water from domestic points to satisfy population demand. This matter has been raised by pumping-station attendants and …

Evaluation Of Digital Twin Approaches For Thermal Modeling And Energy Optimization For Existing Buildings, Jason Bastie Muermann

Theses and Dissertations

Residential, commercial, and industrial building sectors in the United States were responsible for 42% of the nation’s consumption of 100.2 quadrillion BTUs of energy in 2019 [1]. 80% of the nation’s energy is sourced from fossil fuels, including coal, natural gas, and petroleum. Fossil fuels are known contributors to carbon emissions and climate change, making energy reduction vital. Consequently, New Jersey Department of Military and Veterans Affairs (NJDMAVA) is tasked with evaluating energy consumption and efficiency in all New Jersey Army National Guard (NJARNG) facilities, as mandated by TAG Policy Letter 18-5, Executive Order 13990, and the Energy Independence and …

Challenges In Optimization For The Performance On Sustainability Dimensions In Reverse Logistics Social Responsibility, Sumarsono Sudarto, Katsuhiko Takahashi, Mochammad Dewo

Makara Journal of Technology

Reverse logistics social responsibility is preferred as the most acceptable solution for addressing the challenges in stakeholders’ debate regarding social responsibility in supply chains because it involves as many actors as possible in the supply chain to perform social responsibility to achieve sustainability. This paper explores the challenges in achieving optimal policies in sustainability dimensions for collection and recycling facilities in reverse logistics. Sustainability dimensions include economic, environmental, and social aspects. The reverse logistics is modeled on System Dynamics, and a simplified statistical analysis using a contour chart is employed in numerical experiments. Results show a narrow area of optimal …

Water Hammer Analysis For Ash Slurry Disposal Pipelines Of A Thermal Power System, Biprodip Mukherjee, Subhasish Das, Satyapriya Mandal

Journal of Environmental Science and Sustainable Development

Coal-ash slurry transportation via pipelines has been accepted as a potential, economical, and dependable mode of two-phase flow of solid-liquid transportation. It is solid-liquid transportation where the ash slurry generally flows through mild steel, and a good amount of pump energy and pressure is required to convey the slurry with a density above 1220 kg/m3. The study is basically on the water hammer analysis of ash slurry conveying pipes. Nevertheless, since the hammer analysis is typically carried out in normal water, the study of ash slurry is compared to the know criteria of potable water. The study aims to understand …

A Perspective Into Development Of Pavement Design Methods For Low Volume Roads: A Review, Mwajuma Lingwanda

Tanzania Journal of Engineering and Technology (TJET)

The definition of low volume roads (LVRs) is not time static and it varies from place to place around the world. The importance of such roads for providing access, in connecting communities and link farms to markets is well appreciated worldwide. LVRs are credited as the direct source of social economic development in rural communities, growth, reduction of poverty and sustaining livelihood. Nevertheless, the LVR network is growing at an unsatisfactory rate especially in Sub-Saharan Africa. The slow rate in developing LVR network is attributed to the high cost of construction and maintenance. To the author’s perspective, research has a …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

Trace Dna Detection Using Diamond Dye: A Recovery Technique To Yield More Dna, Leah Davis

Master's Theses

This study aspires to find a new screening approach to trace DNA recovery techniques to yield a higher quantity of trace DNA from larger items of evidence. It takes the path of visualizing trace DNA on items of evidence with potential DNA so analysts can swab a more localized area rather than attempting to recover trace DNA through the general swabbing technique currently used for trace DNA recovery. The first and second parts consisted of observing trace DNA interaction with Diamond Dye on porous and non-porous surfaces.

The third part involved applying the Diamond Dye solution by spraying it onto …

Machine Learning-Based Data And Model Driven Bayesian Uncertanity Quantification Of Inverse Problems For Suspended Non-Structural System, Zhiyuan Qin

All Dissertations

Inverse problems involve extracting the internal structure of a physical system from noisy measurement data. In many fields, the Bayesian inference is used to address the ill-conditioned nature of the inverse problem by incorporating prior information through an initial distribution. In the nonparametric Bayesian framework, surrogate models such as Gaussian Processes or Deep Neural Networks are used as flexible and effective probabilistic modeling tools to overcome the high-dimensional curse and reduce computational costs. In practical systems and computer models, uncertainties can be addressed through parameter calibration, sensitivity analysis, and uncertainty quantification, leading to improved reliability and robustness of decision and …

Rattus Norvegicus As A Biological Detector Of Clandestine Remains And The Use Of Ultrasonic Vocalizations As A Locating Mechanism, Gabrielle M. Johnston

Master's Theses

In investigations, locating missing persons and clandestine remains are imperative. One way that first responder and police agencies can search for the remains is by using cadaver dogs as biological detectors. Cadaver dogs are typically used due to their olfactory sensitivity and ability to detect low concentrations of volatile organic compounds produced by biological remains. Cadaver dogs are typically chosen for their stamina, agility, and olfactory sensitivity. However, what is not taken into account often is the size of the animal and the expense of maintaining and training the animal. Cadaver dogs are typically large breeds that cannot fit in …

Analysis Of Ore Hand-Crushed Size Distribution For Grinding Process In The Artisanal And Small-Scale Gold Mines Production: A Case Study Of Nholi Mine, Bahi District, Malugu Tembo

Tanzania Journal of Engineering and Technology (TJET)

(ASGM) employed numbers of people compared to large-scale mines. The ASGM has been played a crucial role in poverty alleviation and rural development, particularly in developing countries. The mined ore is crushed and ground for beneficiation of gold. The grinding process involved the size reduction of blasted materials to acquire minerals of interest. This paper presents the size distribution of hand-crushed for blasted materials using sieve analysis and digital image processing. The sieve test results for hand-crushed blasted material of three muck-piles were ranged between 17 mm and 36 mm that is equivalent to 20% and 80% passings respectively, with …

Energy Assessment Of E-Motorcycles As A Clean Transport Mode For Passenger Mobility: A Case Of Ilala District, Dar Es Salaam, John Shirima

Tanzania Journal of Engineering and Technology (TJET)

Electric motorcycles or e-motorcycles is a clean mode of road transport that present a prominent solution toward decarbonizing cities. Despite of e-motorcycles being cleaner than gasoline ones, at the moment, there is missing information whether it is feasible to replace gasoline motorcycles with e-motorcycles used for business transport purposes. This paper, therefore, presents the results comparing energy usage when using e-motorcycles and when using the gasoline motorcycles. The energy demand for driving passengers using an e-motorcycle in the precarious routes originated from Gongo la Mboto bus stop to Segerea bus stop, Buguruni Malapa, Gerezani bus stop, Kivukoni bus stop, and …

Damage Stability Study Of A 500 Dw Ro-Ro Ferry Vessel, Zulfaidah Ariany, Budhi Santoso, Sarwoko Sarwoko, Nauval Abdurrahman Prasetyo

Makara Journal of Technology

The development of the crossing transportation industry is currently increasing in the island areas. The use of Ro-Ro type ferry boats is extremely efficient in moving people, goods, and vehicles. The current research focuses on the damage stability of the 500 DWT Ro-Ro ferry, which aims to meet the needs of the Ro-Ro ferry in the archipelago area. The previously existing initial design of a barge hull with a main size Lpp = 40.15 m, B = 12 m, H = 3.2 m, and T = 2.15 m was used to analyze the damage stability condition further. First, the drawings …

Energy Dissipation In A Sand Damper Under Cyclic Loading, Ehab Sabi

Civil and Environmental Engineering Theses and Dissertations

Various seismic and wind engineering designs and retrofit strategies have been in development to meet structures' proper and safe operation during earthquake and wind excitation. One such method is the addition of fluid and particle dampers, such as sand dampers, in an effort to reduce excessive and dangerous displacements of structures. The present study implements the discrete element method (DEM) to assess the performance of a pressurized sand damper (PSD) and characterize the dissipated energy under cyclic loading. The idea of a PSD is to exploit the increase in shearing resistance of sand under external pressure and the associated ability …

The Rise Of Terrorism In Africa And What It Means For U.S. Policymakers, Bridget Mary Hughes

Master's Theses

This thesis utilizes three case studies to measure the rise of terrorism in Africa. This qualitative data leads the reader to one ultimate question: what does the rise in terrorism in Africa mean for the United States (U.S.) and U.S. policymakers, National Security academia, students in National Security, if anything at all? The answer is: if civilian and military compounds are being targeted by these violent extremists, as these three case studies demonstrate, it is my recommendation that U.S. policymakers cease sending troops to the African theater and, instead, allocate funding to the citizens and nonprofits of the countries whom …

Evaluation Of Material Request Order To Support Sustainable Construction, Fajar Susilowati, Nur Nahdiah Anggraeni

Makara Journal of Technology

This study was conducted on one of Indonesia’s apartment projects, in which reinforced concrete is the main structure. Based on existing project data, this project experienced a decline in the construction work’s progress, thus reducing the project’s overall progress. This decline occurred because the delivery of concrete reinforcement material was delayed. This study aimed to determine the process of material request order and its relationship with the work implementation, as well as the factors that influenced the delayed arrival of concrete reinforcement material at the project site. The method used in this study was observation and interview. Data were analyzed …

Structural Health Monitoring Of Fatigue Cracks For Steel Bridges With Wireless Large-Area Strain Sensors, Sdiq Anwar Taher, Jian Li, Jong-Hyun Jeong, Simon Laflamme, Hongki Jo, Caroline Bennett, William N. Collins, Austin Downey

Faculty Publications

This paper presents a field implementation of the structural health monitoring (SHM) of fatigue cracks for steel bridge structures. Steel bridges experience fatigue cracks under repetitive traffic loading, which pose great threats to their structural integrity and can lead to catastrophic failures. Currently, accurate and reliable fatigue crack monitoring for the safety assessment of bridges is still a difficult task. On the other hand, wireless smart sensors have achieved great success in global SHM by enabling long-term modal identifications of civil structures. However, long-term field monitoring of localized damage such as fatigue cracks has been limited due to the lack …

Passive Radiative Cooling By Spectrally Selective Nanoparticles In Thick Film Nanocomposites, David Allen Young

USF Tampa Graduate Theses and Dissertations

Passive cooling of buildings is a benefit to society since no energy input is required for space cooling which reduces electricity consumption, fossil fuel burning, and greenhouse gas emissions. When a passive cooling technology radiates heat from the earth through the atmospheric windows to space higher levels of cooling power are possible -- this phenomenon is classified as passive “radiative” cooling. Spectrally selective surface coatings provide radiative cooling to lower surface temperatures by reflecting most solar radiation, while emitting infrared radiation at wavelengths between 8-13 μm through the primary atmospheric window to the cold of space. Multiple applications of radiative …

Enhancement Of Biogas Production Through Solid-State Anaerobic Co-Digestion Of Food Waste And Corn Cobs, Lukhi Mulia Shitophyta, Anisa Salsabila, Firanita Angraini Putri, Siti Jamilatun

Makara Journal of Technology

Although biogas has been primarily produced through liquid anaerobic digestion, this method leads to the floating and stratification of fibers and non-homogeneous mixing, which can reduce the biogas yield. Alternatively, biogas can be produced by the solid-state anaerobic digestion (SS-AD) of organic material with a high solid content, such as corn cobs. We investigated the co-digestion of food waste and corn cobs as a biomass feedstock for SS-AD in biogas production. We measured the effects of the total solid (TS) content, percentage of food waste, and reduction in volatile solids (VS), from which we determined its appropriate kinetic model. We …

Control Strategy For Solar Energy-Saving Lamps For Optimized Energy Utilization And Sustainability Of Operation Durability: Indonesia Case, Burhanuddin Halimi, Agus Purwadi, Nana Heryana

Makara Journal of Technology

To solve the electrification ratio issue, the Indonesian government has promoted the use of solar energy-saving lamps. This study proposes a control strategy that adopts current reference time-based profiling for solar energy-saving lamps. For optimal energy consumption, the current reference profile is determined according to users’ daily energy requirements. From the aspect of user comfort, a gradual step reference profile is also introduced to provide a subtle change in lighting intensity level. The proposed control strategy can minimize energy consumption and optimize the operation durability of the system. The concept is verified by simulating four scenarios, the results of which …

A Case Study Of Protecting Bridges Against Overheight Vehicles, Aly Mousaad Aly, Marc Hoffmann

Faculty Publications

Most transportation departments have recognized and developed procedures to address the ever-increasing weights of trucks traveling on bridges in service today. Transportation agencies also recognize the issues with overheight vehicles’ collisions with bridges, but few stakeholders have definitive countermeasures. Bridges are becoming more vulnerable to collisions from overheight vehicles. The exact response under lateral impact force is difficult to predict. In this paper, nonlinear impact analysis shows that the degree of deformation recorded through the modeling of the unprotected vehicle-girder model provides realistic results compared to the observation from the US-61 bridge overheight vehicle impact. The predicted displacements are 0.229 …

Estimating The As-Placed Grout Volume Of Auger Cast Piles, Tristen Mee

USF Tampa Graduate Theses and Dissertations

Augered Cast-in-Place (ACIP) piles are a geotechnical foundation element increasingly used to support large publicly funded structures as an alternative to drilled shafts or driven piles. ACIP piles are constructed by drilling an excavation to the full length of the designed pile with a continuous flight auger. Grout (cement, sand, and water mixture) is then pumped through the hollow auger stem to begin grouting the excavation. After establishing an initial head pressure, the auger is slowly extracted while the remainder of the pile is grouted. Once the auger is completely removed, the steel reinforcement cage is lowered into the grouted …

The Role Of Ball Backspin Alignment And Variability In Basketball Shooting Accuracy, Nathan Slegers, Dave Love

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Interaction between the shooting hand and ball at the moment a basketball is released generates a three dimensional backspin of the ball. This study is the first to investigate how characteristics of the backspin alignment and variability contribute to lateral shooting accuracy. Spin axis (SA) direction and backspin magnitude were measured on 25 shot attempts for 26 collegiate basketball players (male: n = 16, female: n = 10). The mean SA alignment, as viewed from the shooting hand side, was found to be tipped down and towards the target (p < 0.001). Standard deviations (SD) in the SA alignment were strong predictors of lateral accuracy (vertical SD: r = 0.80, p < 0.001, forward-backward SD: r = 0.51, p = 0.01), with variation in the vertical alignment being the best predictor. No significant correlation between mean SA misalignment and lateral accuracy was observed. However, intra-individual relationships between SA misalignment and lateral error revealed that individuals tended to have 0.17 degrees more misalignment for each cm of lateral error (p < 0.001, 95% CI: 0.24–0.09). These indicate that while an individual’s mean alignment may not predict lateral accuracy, improving one’s SA alignment and reducing alignment variability may increase lateral accuracy.

Investigation Of Control Parameters, Strategies, And Transport Modeling For Effective Electrokinetic Nanoparticle Treatment Of Cementitious Materials, Huayuan Zhong

Doctoral Dissertations

Various deleterious chemical species (including sulfates, chlorides, and others) contaminate concrete structures which are inherently porous and thus suffer from compromised durability. Several technologies have been developed for repairing concrete or enhancing the service life. Nevertheless, their efficiency, practicability, and cost can vary widely. Compared with chemical grout, fiber wrap, and traditional repair technology, electrokinetic nanoparticle treatment (EN) has been found to provide remarkable benefits for strength restoration and mitigation of durability problems via porosity reduction. Nanoparticle instability and over dosage issues can arise and lead to problems during treatments. In many cases, these treatment processes have been accompanied by …

Development Of A New Electro-Osmotic Consolidation Apparatus, Yenni Mariana Ramírez-Mazo, Juan Pablo Osorio, Sergio Agudelo

Conference papers

Electro-osmotic consolidation is a ground improvement technique in which a DC voltage is applied to the soil via electrodes, in order to drain the water contained in the pores increasing the effective stress, and thus improving the geotechnical properties of the soil. The technique increases the shear strength, reduces the compressibility, and changes the chemical composition of the saturated soft clayey and silty soils to which it can be applied. Electro-osmotic consolidation has been successfully applied in different projects worldwide. This paper presents the development of a new electro-osmotic consolidation apparatus built at Universidad de Antioquia. Tests were carried on …

Using Comprehensive Finite Element Analysis To Simulate A Special Connection In Post-Tensioned Concrete, Joshuah Leljedal

Symposium of Student Scholars

Finite element analysis (FEA) uses differential equations to determine a computer-based solution that explains interactive behaviors within models of complex structural and mechanical systems, subjected to various loading and environmental conditions. Those systems are partitioned into finite elements consisting of a linear mesh with nodes at each end point, and FEA determines relationships, such as force-displacement, between each of the finite elements. This apportioned model allows systems to be evaluated under multiple loading scenarios. Computer-based FEA offers significant benefits that reduce cost and the time required to perform alternative analysis for complex structural systems. In this research project, a comprehensive …

Comparison Of Concrete And Steel Jacket Methods For Reinforcing A Concrete Bridge Pier By Numerical And Experimental Studies, Hadi Faghihmaleki

Makara Journal of Technology

Various rehabilitation and strengthening procedures have been developed in recent decades. A study to determine which methods can be implemented to increase the useful life of the bridge before strengthening must be performed. In this study, the seismic behavior of a reinforced concrete bridge pier with dimension 3.5 × 3.5 m, which was reinforced by two steel and a concrete jacket, was investigated. Nonlinear geometric models and materials were analyzed to estimate the seismic parameters of the pier. Results show an increase in energy absorption, ultimate strength, and ductility for the steel jacket, as well as a greater increase in …

Effect Of Arc Plasma Sintering On The Structural And Microstructural Properties Of Fe-Cr-Ni Austenitic Stainless Steels, Parikin Parikin, M. Dani, A. Dimyati, N. D. Purnamasari, B. Sugeng, M. Panitra, A. Insani, T. H. Priyanto, S. Mustofa, Syahbuddin Syahbuddin, A. Huang

Makara Journal of Technology

X-ray diffraction techniques were performed to determine the actual crystal structure of A2 austenitic stainless steel (ASS) as-cast and A2 ASS after arc plasma sintering (APS) for 2 s. Computations were conducted on the basis of the Bragg arithmetic formula by comparing the S2 arithmetic with the interplanar spacing. The Bragg arithmetic formula is a simple series for the determination of the crystalline phase of materials based on the Miller indices of cubic shapes or other shapes. A2 ASS as-cast was identified to have a crystal structure of face-centered cubic with lattice parameter a = 3.58 Å. A similar crystal …

Trend Significance Levels Of Rain Onset And Cessation And Lengths Of The Wet And Dry Seasons In Epe, Lagos State, Nigeria, Adekunle Adedeji Alli, Olorunwa Eric Omofunmi

Makara Journal of Technology

This study aims to reduce crop failure resulting from a dry spell, which is the first occurrence of unsustainable rainfall that deceives farmers into planting. Thus, trends need to be tested using hypothesis, kurtosis, and other statistics to analyze the risks associated with unstable planting calendars and their possible mitigation strategies. The daily rainfall data from 1982 to 2018 were obtained from the archive of NASA/POWER SRB/FLASH, and the research location is Epe, Lagos State, Nigeria, which lies at latitude 6.585° N and longitude 3.962° E. Microsoft Excel was used to perform the tests. Results show that the null hypothesis …

Kinetic Modeling Study Of Laminar Burning Velocity Of Gasoline–Ethanol–Methanol Blends At Elevated Temperature And Pressure, Ahmad Syihan Auzani, Cahyo Setyo Wibowo, Riesta Anggarani, Yulianto Sulistyo Nugroho, Bambang Sugiarto

Makara Journal of Technology

Gasoline–ethanol–methanol (GEM) blends have been considered to replace pure gasoline as spark ignition engine fuel. Their physical and chemical properties and performance and emission measurements from real engines have been reported previously. However, a fundamental study that can explain the unique results of GEM compared with those of pure gasoline is lacking. This study aims to compare the laminar burning velocity of GEM blends at different mixtures, equivalence ratios, temperatures, and pressures with that of pure gasoline. A laminar flame propagation model and reaction mechanisms from the literature were were for a numerical simulation. In this study, the chemical components …