Civil Engineering Commons^™

Current Status Of Design And Construction Of Piles With A Pilot Hole On Rock, Charles C. Crowner

College of Graduate Studies: Theses & Dissertations

Driven piles at project sites get their load bearing capacity from side friction along the driven lengths as well as from end resistance. Pilot holes is a pile driving assistance method used to aid driving displacement piles through hard/ dense layers and rock. These pilot holes can be a size smaller or larger than the pile that is to be installed. The pilot hole is first drilled down to a specific depth. The use of a pilot hole reduces the “end bearing” and “side resistance” within the drilled zone and aids the driving of the pile. This process also complicates …

Predicting Anthropogenic Underwater Pile Driving Noise Using Pile Driving Analyzer (Pda) Data, Brandon Alfredo Rivera

UNF Graduate Theses and Dissertations

In the past several years, there has been increasing concern about anthropogenic noise generated during marine pile driving. This concern is expected to increase concomitantly with increases in waterfront construction efforts associated with aging infrastructure and sea level rise. Several guidelines are available to help predict underwater noise transmission due to pile driving, but the issue with all these methods is that they require one to measure sound pressure levels at one locus or more from the driven pile. In the context of marine construction, adding specifications for underwater noise collection may be expensive or difficult because contractors typically have …

The Stability Of Nanobubbles And Its Application In Contaminated Sediment Treatment, Shaini Dilsha Aluthgun Hewage

Dissertations

This dissertation consists of two sections. First, nanobubbles' stability and behavior are studied using experimental and theoretical approaches. Second, nanobubbles application combined with ultrasound to remediate contaminated sediments is discussed.

The stability study consists of four sections. (i). Laboratory investigation to determine bubble size distributions and zeta potentials for different gases, pH levels, temperatures, and salt conditions. (ii). A theoretical study based on the diffused double layer theory to explain nanobubbles' behavior in different NaCl concentrations. (iii). Nanobubbles' stability in electrolyte solutions under different ion valencies using deionized water, NaCl, Na₂SO₄, Na₃PO₄, …

Feasibility Of Geothermal Energy Piles In New Orleans Alluvial Soils, Patrick A. Thurmond

LSU New Orleans Theses and Dissertations

Geothermal energy piles offer the benefits of modifying existing construction practices to reduce costs associated with heating and cooling. A major obstacle today in effective utilization of these systems is a general lack of site-specific data on the thermal properties of subsoils. To maximize the potential efficiency of these systems, engineers require an understanding of the potential impact of this technology on existing foundation design methodology as well as a means for quantifying potential heat transfer through soil by determination of the soil’s thermal conductivity. This study examines the feasibility of energy piles with a focus on alluvial soils found …

Expanding The Concept Of Comprehensive Area Ratio Parameter To The South-Central States Towards Simplifying The Structural Evaluation Of Flexible Pavements At The Network Level, Nitish R. Bastola

Civil Engineering Theses

The surface deflection bowl data collected through Non-Destructive Testing (NDT) has been widely utilized by various Department of Transportation (DOTs) in the South-Central States and other places. The primary purpose of using deflection-based NDTs in network-level assessment is to identify a weak pavement section that requires further analysis at the project level. The falling weight deflectometer (FWD) test is one of the common NDT based tests utilized by highway agencies in assessing the performance of the flexible pavement. However, a robust method to evaluate pavement sections utilizing FWD data from all the sensors are seldom developed. There is always a …

Laboratory Testing And Mechanistic Analysis Of Treated Subgrade Soils, Hari Kumar Reddy Yarrapureddi

Civil Engineering Theses

Calcium-based stabilizing agents such as cement and lime have been extensively used to improve the engineering properties of base and subgrade layers of pavement systems. Recently, polymers and chemical stabilizers have become popular due to cost efficiency, ease of application, and fast curing times. In this study, California Bearing Ratio (CBR) values of polymer and chemical treated soils were compared with the CBR values of soils treated with conventional stabilizers. Parametric sensitivity analyses was carried out on key parameters including the type of subgrade soil, stabilizing agent, stabilizing agent treatment levels, and moisture conditioning. Additionally, numerical analyses was performed to …

Cement Stabilized Crushed Stone Base Course Strength And Stiffness Analysis, Andrew Deschenes

Graduate Theses and Dissertations

Approximately 70 – 80% of state departments of transportations (DOTs) utilize the 1993 AASTHO Guide for Design of Pavement Structures (1993 AASHTO) [1] for structural design of pavements. A growing portion of DOT’s are beginning to implement the Mechanistic-Empirical Pavement Design Guide (MEPDG), referred to as AASHTOWare Pavement ME [2]. The 1993 AASHTO flexible guide applies empirically derived unitless strength values referred to as structural layer coefficients and structural numbers (SN) to pavement thickness and pavement types. The 1993 AASHTO rigid flexible guide utilizes the depth and strength of the concrete pavement, with the composite spring constant (kc), which is …

Effect Of Citric Acid On Slump, Compressive Strength, And Setting Time Of Belitic Calcium Sulfoaluminate Concrete, Israel Aguilar Rosero

Graduate Theses and Dissertations

Belitic calcium sulfoaluminate (BCSA) cement has well established advantages related to fast setting time, fast strength gain, long-term strengths, shrinkage, and sustainability. Due to its fast setting and hardening, this type of cement has historically been used to repair concrete structures, highways, and runways. This work provides much needed guidance on establishing mix design criteria for BCSA cement. Guidance is also given on the effects of set retarders on strength, slump, and setting times. Citric acid and a phosphonic acid-based admixture were tested as retarders for different concrete mixtures. Three studies were performed. In the slump study five different water …

Hybrid Passive Control System For Seismic Response Mitigation Of Steel Frame Structures, Mohammad Hossein Mehrabi

Student Works (2020-2029)

Large vibration forces such as from seismic excitations can cause structural damage and structural collapse in the case of intense earthquakes. A large number of novel methods and of these techniques has weaknesses and strengths. Several control devices demonstrate a two-step mechanism in which the structure's stiffness is initially raised, and then the of the first vibration period down to a region where the structural response is significantly increased. The main aim of this thesis is to propose a hybrid passive control system comprises of two phases for the seismic retrofit of moment-resisting steel frames. The first phase is a …

St. Mary And St. Anne Cathedral, Cork: An Optimum Heating Solution For Heritage Buildings?, Christopher Shiell, Roger P. West

Civil Engineering Research in Ireland 2020

Cathedrals and most churches are characterised by having large internal, undivided spaces and permeable building envelopes. They are often used little, intermittently, but predictably and, in spite of the fact that they are unique in still being largely used for the purpose for which they were built many centuries ago, they are now often used for additional purposes, for which they were never designed. These uses include concerts, graduation ceremonies, filming and a host of other uses all of which require a level of thermal comfort not envisaged by the original builders. Research was undertaken by the authors into the …

Challenges And Opportunities To Deep Retrofitting Of Traditional Fabric Buildings To Achieve Nearly Zero Energy Building (Nzeb), Maria Lopez Zambrano, Paul Kenny, Jamie Goggins

Civil Engineering Research in Ireland 2020

Many of our traditional buildings are disappearing or in danger of being under utilised because they are not comfortable for modern day living and do not meet our present day needs. If a building does not have a use, inevitably it deteriorates and eventually becomes a ruin or gets demolished. It is important to retrofit these buildings, which are part of our identity and can be powerful tourist attractions even though most of them are not listed. Some owners want to apply for retrofitting schemes and grants, but they are rejected because there are no standard solutions to achieve low …

Teaching Of Structural Analysis Into The Future, Dermot O'Dwyer

Civil Engineering Research in Ireland 2020

The engineering curriculum has always been full. In the past civil and structural engineers studied a wide variety of technical subjects within the broad field of engineering science and spent many hours working on design projects. Modern engineering curricula try to cover these areas while also dedicating more time to structured group-work, report writing and communication skills. Although students spend longer in college the number and range of technical fields that students must master is considerably larger than in the past. As a result the time available to any one topic area has reduced. At the same time the work …

Can Deap Help Us To Predict The Energy Demand And Indoor Temperature Of Homes Before And After Renovation? A Case Study From Dublin, Paul Moran, Jamie Goggins

Civil Engineering Research in Ireland 2020

Improving the energy efficiency of buildings via retrofitting is seen as one of the key mitigation measures to reducing the energy demand and carbon emissions of the built environment in Ireland. However, while energy efficiency retrofits for buildings are effective in theory, the energy savings estimated by statistical or engineering models can often be inaccurate. The Domestic Energy Assessment Procedure (DEAP) is the standard assessment procedure used for assessing the energy performance standard of residential buildings in Ireland. This paper examines the gas energy demand for space and water heating and the internal temperature profiles in contrast to DEAP estimates …

Operational And Embodied Energy Analysis Of 8 Single-Occupant Dwellings Retrofit To Nzeb Standard, Richard O'Hegarty, Shane Colclough, Oliver Kinnane, Donal Lennon, Etienne Rieux

Civil Engineering Research in Ireland 2020

In line with the Energy Performance of Buildings Directive, Irish dwellings are being retrofit to near Zero Energy Building (nZEB) standards - with a number of the deep energy retrofits classified as A-rated. As a result of the low operational energy, the embodied energy share of an nZEB's life cycle energy is significantly increased. Therefore, to obtain a holistic picture of the change in energy profile of buildings, the embodied energy of the material added to achieve that low performance should also be taken into account. This paper presents results from a case study of 8 single-occupant terrace bungalows retrofit …

Art In Engineering: Evoking A Creative Response From Engineering Students And More, Jamie Goggins, Marta Fuente, Eamonn Madden

Civil Engineering Research in Ireland 2020

The concept of creativity being only associated with writers, painters, and artistic professions is outdated. The future engineer must embrace maths, art and creativity to unlock innovative solutions. Traditional engineering courses with an emphasis predominately on maths and science can produce graduates who are constrained in developing design solutions without creativity to unlock innovative solutions. This paper describes a short course introduced in the School of Engineering at NUIGalway in 2018 to expose students to creative thinking research and principles and engage in various forms of creative expression (photography, painting and essay writing) to articulate their response to a set …

The Broader Development Of The Student Engineer Through Industry Based Experiential Learning, Donogh Coleman, Ted Mckenna, Mary Moloney

Civil Engineering Research in Ireland 2020

The global drive for industry-aware and industry-ready engineering graduates, has led to the development and integration of experiential learning through work placements. Industry is looking to recruit graduates with not just the requisite technical engineering skills, but also graduates with inter alia high levels of teamwork and communications skills. This has been recognised by CIT with the integration of work placement in most of its undergraduate programmes. This paper provides an overview of the student placement process in the Department of Civil, Structural and Environmental Engineering at CIT, includes the work placement alternative which was implemented due to the COVID-19 …

Long-Run Traffic Simulations For Multi-Lane Road Bridges, Róisín Donnelly, Lorcan Connolly, Ilaria Bernardini

Civil Engineering Research in Ireland 2020

The maintenance and repair of ageing bridges is a concern for road infrastructure managers. This issue is amplified by the increasing weights and frequency of travel of freight vehicles in recent times. In order to accurately assess the risk of damage for road bridges, it is essential to have knowledge of both historical and current bridge loading. When available, site-specific Weigh-in-Motion (WIM) data can be effective in creating representative load models for a structure. However, for cases where WIM data is not available and in cases where future damage must be predicted, it is necessary to simulate appropriate data using …

Repair & Rehabilitation Of Daly's (Shakey) Bridge, Cork City, Michael Minehane, John Gamble

Civil Engineering Research in Ireland 2020

This paper describes the rehabilitation of (Shakey) Bridge, an existing single-span suspension bridge crossing the northern channel of the River Lee in Cork City. The bridge was opened in 1927 to replace an earlier ferry crossing at the same location. Daly’s bridge is included on the Record of Protected Structures and the National Inventory of Architectural Heritage. It remains the only suspension bridge in Cork City and is the only surviving bridge of its kind in Ireland. It is considered to be a significant contributor to the architectural heritage of the city. This case study describes the project development including …

Reinforcement Of Timber Elements In Compression Perpendicular To The Grain Using Compressed Wood Dowels, Michael Conway, Conan O'Ceallaigh, Sameer Mehra, Annette M. Harte

Civil Engineering Research in Ireland 2020

In the past decade, there has been an increased focus on the environmental impacts of construction and a movement towards more sustainable construction products. Timber is one such sustainable product that can achieve these environmental targets but, while timber has a high strength-to-weight ratio parallel to the grain, it demonstrates poor strength perpendicular to the grain. As a result, stress perpendicular to the grain is an important factor in the design of timber structures, especially in areas of concentrated loading, such as supports. This paper describes a study, which examines the use of compressed wood dowels as a sustainable alternative …

Development And Testing Of A Deployable Double Layer Tensegrity Grid, Michael Quilligan, Valentin Gomez-Jauregui, Cristina Manchado, Cesar Otero

Civil Engineering Research in Ireland 2020

Tensegrity is a structural principle based on the use of isolated or contiguous pin jointed components in compression inside a net of continuous tension. Although the concept has been studied for many decades, relatively few examples of tensegrity structures have been used for civil engineering purposes.

A Review Of The Engineering Constraints And Project Management Challenges Involved In Utilising Scot’S Church As A Heritage Asset Through Responsible Adaptive Reuse And Conservation Strategies, Óisín Smith

Civil Engineering Research in Ireland 2020

In the field of structural building, there has been a rising popularity in adaptive reuse of older structures, which stems from a variety of stimuli. Apart from preserving built heritage, providing old buildings with new functions promotes sustainability while preventing and containing urban sprawl. Target 11.4 of the United Nation’s Sustainable Development Goals Agenda 2030 explicitly outlines that “more efforts to protect and safeguard the world’s cultural and natural heritage” are required. In order to valorise and regenerate obsolescent structures, intervention is often required. The dissertation provides a comprehensive overview of conservation engineering and demonstrates the importance of an engineer’s …

An Evaluation Of Design Issues Identified During Reviews Of Structural Designs Of Buildings From 2015 To 2020, Patrick Crean, Richard Osborne

Civil Engineering Research in Ireland 2020

A recent study on failures of structures in Ireland indicated that approximately 40% could be apportioned to designer error. A 2019 report into recent structural cracking of a high-rise building in Sydney Australia recommended that Independent third party checking by a Chartered Engineer should be a requirement on all major projects prior to construction. The report also stated that the critical elements of the design on these projects should be identified. It is obvious that a certain percentage of buildings constructed each year contain design flaws and only a small proportion of these ever result in a failure. However there …

Loading On Long Span Bridges In Heavily Trafficked Areas, Michael Quilligan, Eugene O'Brien

Civil Engineering Research in Ireland 2020

The critical traffic loading condition for long-span bridges is congestion when vehicles may be closely spaced together. Data on very high traffic flows is limited however, as induction loops which are typically used to collect traffic data, are ineffective when traffic flow breaks down. A number of long span bridges are located in areas of high traffic with periods of recurring congestion occurring daily. While the inter-vehicle gap distances are greater than those occurring during non-recurring full stop accident type events, the high frequency of the recurring congestion events can increase the probability of a critical load case occurring.

A Numerical Study Of The Effect Of Wind Barriers On Traffic And The Bridge Deck, Yuxiang Zhang, Philip Cardiff, Jennifer Keenahan

Civil Engineering Research in Ireland 2020

Wind actions can have a great impact on both bridges and traffic on bridges. However, structures designed to shelter the traffic from wind can influence the aerodynamic performance of the bridge deck, especially for long-span bridges. This study compares the effect of non-perforated walls and perforated walls used as wind barriers for traffic by conducting Computational Fluid Dynamics (CFD) simulations on three-dimensional geometries of a four-lane bridge deck. Steady-state simulations employ the Reynolds-Averaged Navier Stokes (RANS) method with the k-epsilon turbulence model and all simulations use parallel computing. An open-sourced software OpenFOAM is used.

Simulation Of Traffic Loading On Long Span Bridges, Hang Zhang, Michael Quilligan

Civil Engineering Research in Ireland 2020

Existing long span load models have typically been developed using a number of conservative assumptions, and as such are more applicable to the design of new bridges rather than the assessment of existing structures. Excessive conservatism in such assumptions can lead to expensive and unnecessary interventions in existing bridges. Furthermore, existing load models do not always allow for correlations in traffic weights and vehicle positions on the bridge.

Thermodynamic Cement Hydration Modelling Using Hydcem, Niall Holmes, Denis Kelliher, Mark Tyrer

Civil Engineering Research in Ireland 2020

Thermodynamics have been successfully applied to the field of cement hydration science to predict the formation of phase assemblages and pore solution chemistry. For any cement hydration model to be accepted, it must provide accurate forecasts of which solids may form and how the cement will dissolve over time. This is particularly important for the ongoing development of new sustainable cements and understanding their hydration behaviour in service.

Computational Modelling Of Next Generation Materials For Steel Catenary Risers In The Offshore Industry, Padraic O'Donoghue, Ronan Devaney, Seán B. Leen

Civil Engineering Research in Ireland 2020

Production risers are used to conduct oil or gas from the wellhead to an offshore production facility. Due to technical challenges with flexible marine pipe at large depths, there has been a move to steel catenary risers (SCRs) in recent years, due to the availability of high strength low alloy (HSLA) steels, such as bainitic X100. HSLA steels make SCRs a viable option for deep water due to the reduction in complexity and hence cost, compared to flexible pipes. However fatigue response is an important factor in their design, particularly in the vicinity of welded connections.

Fish Farm Monitoring For Blue Growth, Vikram Pakrashi, Wenliang Qiu, Michael O'Byrne, Paul Cahill, Basuraj Bhowmik, Bidisha Ghosh

Civil Engineering Research in Ireland 2020

Fish farms are structures which require unique monitoring. There are problems related to marine growth and overloading, along with breaks in nets. These can lead to damage in fish or attacks of worms, which in turn is responsible for loss of fish. Such loss can be extremely expensive.

Instrumented Trains As A Probe For Structural Health Monitoring Of Railway Infrastructure, Vikram Pakrashi, Claire Mcgeown, Rohit Chawla, David Hester, Alexandra Micu, Eugene O'Brien

Civil Engineering Research in Ireland 2020

Railway infrastructure throughout the world is degrading and the Structural Health Monitoring (SHM) of this infrastructure can be effective. As a part of INTERREG project SIRMA, it is being investigated in instrumented trains can be used as a moving sensor for SHM of bridges and rail lines. Off-the-shelf calibrated sensors will be connected to trains and the instrumentation regime will be decided based on each SHM need. Output-only algorithms for anomaly detection and system identification will be implemented. Damage Sensitive Features (DSF) will be investigated to assess the best markers for the proposed SHM. A combined set of instrumentation and …

Implementation Of A Low-Cost Rtk Positioning System For Drone-Assisted Structural Inspections, Aidan Keaveney, Patrick Mcgetrick

Civil Engineering Research in Ireland 2020

Technological developments of unmanned aerial vehicles (UAVs) have been rapid and significant in recent years, and thus the scope of use has increased across a broad spectrum of industries, including the fields of structural and civil engineering. A key part of structural engineering is ensuring that a structure can be inspected during its service life to determine if there is any defect that could diminish its structural integrity. In practice, the procedures involved in such inspections to locate defects can be dangerous, time consuming and expensive to conduct. The aim of this study is to establish a system that is …