Civil Engineering Commons^™

Modified Design Of Pin-On-Ring Tribometer For Hip Joint Prostheses Measurement; Case Study On Salat Activity, Muhammad Khafidh, Jamari Jamari, Sulardjaka Sulardjaka, Mohamad Tauviqirrahman, Emile Van Der Heide

Makara Journal of Technology

Total hip replacement (THR) is one of the most successful orthopedic surgical procedures for replacing a broken hip joint. In THR, wear may occur at the articulating surface of the acetabular cup and the femoral head. In Indonesia, the country with the largest Muslim population in the world, most of the inhabitants do salat (praying) every day. THR users are banned from doing salat for fear it will damage the hip joint prostheses. The previous wear calculation methods on the hip joint prostheses use the gravimetric, coordinate measuring machine (CMM), profiler, and geometric method. The disadvantages of the previous methods …

Continuous Production Of Nanotubes And Carbon Clusters By Use Of The Revolver-Injection-Type Arc Jet Producer, Tetsu Mieno, Naoki Matsumoto, Takahashi Tomie, H. Inoue

Makara Journal of Technology

Efficient and continuous production of fullerenes, single-walled carbon nanotubes (SWNTs), and carbon nano-particles has been developed by the JxB arc jet method, where the Lorentz force of magnetic field jets out gaseous carbon particles to the JxB direction. In order to realize continuous mass production of these carbon clusters, the revolverinjection- type arc jet producer (RIT-AJP) has been developed. Production of fullerenes, endohedral metallo-fullerenes, SWNTs, metal-encapsulated carbon nano particles has been examined.

Lateral Load Resistance Of Laminated Veneer Lumber Sengonwooden Joints With Wooden Dowels, Niken Palaeowati, Ali Awaludin, Suprapto Siswosukarto

Makara Journal of Technology

Analytical models for wooden-doweled joints need to be developed. The objective of this research is to determine whether the strength of wooden-doweled joints can be well predicted by equations developed for steel-doweled joints. In this experiment, various connection parameters, such as dowel diameter, species of the wooden dowel, and angle of joints, are studied. The joint specimens are loaded in a quasi-static state with four replications each. A5% offset diameter method is used to determine the lateral load resistance of the tested joints, while the predictions are evaluated by equations given in Indonesian National Standard (SNI) 7973-2013 and the European …

Adjustable Resonance Frequency Of Rf-Mems Capacitor By Using Comb- Drive Actuators: A Design Approaches, Agus Santoso Tamsir, Sandy Tannu Wijaya, Dato’ Burhanuddin Yeop Majlis

Makara Journal of Technology

The needs of smaller size RF varactor is a must today, and MEMS comes to be the potential one. In this paper we proposed an adjustable resonance RF-MEMS varactor by using comb-drive actuators placing in each side of the square movable plate. In our preliminary simulation, we found that the device can work properly but some constraints comes such as the dominancies of harmonic resonance frequencies that influences into the nominal capacitances. Therefore for the next step of development we have to find out the window of the structural dimension for a certain spans and a certain operating frequencies.

Make Or Buy Analysis Model Based On Tolerance Design To Minimize Manufacturing Cost And Quality Loss, Cucuk Nur Rosyidi, Reza Rizkichani Akbar, Wakhid Ahmad Jauhari

Makara Journal of Technology

In a manufacturing company, manufacturing costs, or component prices, and tolerance will affect the price and the quality of a product. Companies must produce high-quality products with low manufacturing costs in order to keep their products competitive in the market; however, it is difficult to produce a high-quality product with a low manufacturing cost. Companies have difficulties in determining the components to be produced using their own manufacturing facilities (make) or outsourced to their suppliers (buy). Hence, a make or buy analysis is needed to minimize the manufacturing costs and quality loss and to determine the optimum alternative regarding make …

Observation Of Tunneling Effects In Lateral Nanowire Pn Junctions, Sri Purwiyanti, Arief Udhiarto, Daniel Moraru, Takeshi Mizuno, Djoko Hartanto, Michiharu Tabe

Makara Journal of Technology

As electronic device dimensions are continuously reduced, applied bias conditions significantly change and the transport mechanisms must be reconsidered. Tunneling devices are promising for scaled-down electronics because of expected high-speed operation and relatively low bias. In this work, we investigated the tunneling features in silicon-oninsulator lateral nanowire pn junction and pin junction devices. By controlling the substrate voltage, tunneling features can be observed in the electrical characteristics. We found that the minimum substrate voltage required for tunneling to occur in pn junctions is higher as compared with pin junctions. The main cause of these effects relies in the difference between …

Argon Ion Irradiation Effect On The Magnetic Properties Of Fe-Al2o3 Nano Granular Film, Setyo Purwanto, Isao Sakamoto

Makara Journal of Technology

We studied the effect of Argon (Ar) ion irradiation on Fe-Al2O3 nanogranular thin film. X-ray diffraction (XRD) patterns show that the ion dose might promote the growth of the Fe2O3 phase from an amorphous phase to a crystalline phase. The magnetic and magnetoresistance properties were investigated using a vibrating sample magnetometer (VSM) and a four point probe (FPP). The results suggest that percolation concentration occurred at the 0.55 Fe volume fraction and with a maximum magnetoresistance (MR) ratio of 3%. The present MR ratio was lower than that of previous results, which might be related to the existence of the …

Digestibility Of Betung Bamboo Fiber Following Fungal Pretreatment, Widya Fatriasari, Wasrin Syafii, Nyoman J. Wistara, Khaswar Syamsu, Bambang Prasetya

Makara Journal of Technology

This research evaluated the effect of fungal pretreatment of betung bamboo fibers and enzymatic- and microwaveassisted hydrolysis on the reducing sugar yield. The enzymatic hydrolysis of the pretreated biomass was carried out with cellulase and 10 and 20 FPU/g of substrate in a shaking incubator at 50 °C and 150 rpm for 48 h. The sulfuric acid concentration used in the microwave-assisted acid hydrolysis was 1.0, 2.5, and 5%, either with or without the addition of activated carbon. Microwave irradiation (330 Watt) was applied for 5–12.5 min. The yield of reducing sugar was better with the microwave-assisted acid hydrolysis, and …

Electron Emission Characteristics Of Multi-Gated Field Emitters, Hidenori Mimura, Yoichiro Neo, Toru Aoki, Tomoya Yoshida, Masayoshi Nagao

Makara Journal of Technology

We have developed a multi-gated field emitter (FE) such as a quadruple-gated FE with a three-stacked electrode lens and a quintuple-gated FE with a four-stacked electrode lens. Both the FEs can focus the electron beam. However, the quintuple-gated FE has a stronger electron convergence than the quadruple-gated FE, and a beam crossover is clearly observed for the quintuple-gated FE.

Properties Of Lignin From Oil Palm Empty Fruit Bunch And Its Application For Plywood Adhesive, Lucky Risanto, Euis Hermiati, Yanni Sudiyani

Makara Journal of Technology

Lignin from lignocellulosic biomass is a potential biopolymer for wood adhesive. The aims of this study were to characterize lignin isolated from the black liquor of oil palm empty fruit bunch fiber pretreated with steam explosion in alkaline conditions and to examine the bond quality of aqueous polymer isocyanate (API) adhesive prepared from lignin, natural rubber latex (NRL), and polyvinyl alcohol (PVA) as base polymers with isocyanate crosslinkers. Lignin was precipitated from the black liquor by adding hydrochloric acid; then the precipitate was separated by filtration, thoroughly washed with water up to pH 2 and pH 5, and dried. The …

The Gaussian Orthogonal Laplacianfaces Modelling In Feature Space For Facial Image Recognition, Arif Muntasa

Makara Journal of Technology

Dimensionality reduction based on appearance has been interesting issue on the face image research fields. Eigenface and Fisherface are linear techniques based on full spectral features, for both Eigenface and Fisherface produce global manifold structure. Inability of them in yielding local manifold structure have been solved by Laplacianfaces and further improved by Orthogonal Laplacianfaces, so it can yield orthogonal feature vectors. However, they have also a weakness, when training set samples have non-linear distribution. To overcome this weakness, feature extraction through data mapping from input to feature space using Gaussian kernel function is proposed. To avoid singularity, the Eigenface decomposition …

Series-Interconnected Plastic Dye-Sensitized Solar Cells Prepared By Low- Temperature Binder-Free Titania Paste, Erlyta Septa Rosa, Lia Muliani, Shobih Shobih, Jojo Hidayat, Brian Yuliarto

Makara Journal of Technology

The aim of this research is to study dye-sensitized solar cells (DSSC). This was implemented on a flexible polyethylene terephthalate (PET) substrate using a mixture of transparent and scattered mesoporous anatase-titania as the electron transport layer for the photoelectrode. This mixture of anatase titania performed a dual function of light scattering and efficient dye absorption. In this study, a porous nano-TiO2 film was prepared on indium tin oxide (ITO) coated polyethylene terephthalate (PET) by using a binder-free titania paste; on it, a DSSC was fabricated. The paste which contained a mixture of TiO2 nanoparticles, acid chloride, and ethanol was printed …

Integration Of Models For Low Carbon Economy, Getachew F. Belete, Alexey Voinov

International Congress on Environmental Modelling and Software

Designing the transition to low carbon economy is a very complex task that touches upon a wide variety of climate-energy-economic systems. We need to explore the various possible climate mitigation scenarios at different temporal and spatial scales. However, due to the diversity of the involved disciplines it is difficult to find one complete and unified modeling approach that works equally well in all those different domains. As a result we have to select 'appropriate' models, which represent only specific aspects of the scenarios and assemble them 'coherently'. In this research we have identified some challenges in integrating multidisciplinary models; and …

A Decision Support System Approach For Identifying Poliutant Source For Optimization Of Beneficial Management Practices Scenario Modelling In Lake Winnipeg Watersheds, Isaac Wong, Luis Leon, Jason Vanrobaeys, Craig Mccrimmon, Phil Fong

International Congress on Environmental Modelling and Software

The Soil and Water Assessment Tool (SWAT) results can be used to source trace loading "hotspots• for optimally locating beneficial management practices (BMP). It is possible to trace upstream and compute the relative contribution of each sub-basin to a point of interest, accounting for in-stream processes, reservoirs and point sources. A decision support system (DSS) framework was developed to run SWAT, perform the otherwise tedious process of source tracing "hotspots" and to optimize BMP locations. The "Crop to Hay- land use change BMP scenario was applied in an attempt to reduce annual loadings of total phosphorus (TP) for three Lake …

Agroecosystem-Watershed (Ages-W) Model Delineation And Scaling, Timothy R. Green, Robert H. Erskine, James C. Ascough Ii, Bruce Vandenberg, Björn Pfennig, Holm Kipka, Olaf David, Micheal L. Coleman

International Congress on Environmental Modelling and Software

Water movement and storage within an agricultural watershed can be simulated at different spatial resolutions of land areas or hydrological response units (HRUs). Interactions between HRUs in space and time vary with the HRU sizes, such that natural scaling relationships are confounded with the simulation scales. Scaling concepts can be tested using the AgroEcoSystem­ Watershed (AgES-W) model with different resolutions of HRUs. Here, we delineated a 56-ha agricultural watershed in northern Colorado, USA farmed primarily under a wheat-fallow rotation. Factors used to distinguish HRUs included topography (surface flow paths), land use (crop strips and native grass), and mapped soil units …

Global Sensitivity Analysis Of Key Parameters In A Process-Based Sugarcane Growth Model - A Bayesian Approach, Justin Sexton, Yvette Everingham

International Congress on Environmental Modelling and Software

While several statistical methods are available to analyse model sensitivity, their application to complex process-based models is often impractical due to the large number of simulation runs required. A Bayesian approach to global sensitivity analysis can greatly reduce the number of simulation runs required by building an emulator of the model which is less computationally demanding. A Gaussian Emulation Machine (GEM) was used to efficiently assess the sensitivity of key agronomic outputs from the APSIM-Sugar crop model to influential input parameters. The sensitivity of simulated biomass and sucrose at harvest was assessed on 14 parameters representing varietal differences and growth …

Dynamic Feedback Between Land Use And Hydrology For Ecosystem Services Assessment, Seleshi Getahun Yalew, Tobias Pilz, Christian Schweitzer, Stefan Liersch, Johannes Van Der Kwast, Marloes L. Mul, Ann Van Griensven, Pieter Van Der Zaag

International Congress on Environmental Modelling and Software

Ecosystem services assessment requires an integrated approach, as it is influenced by elements such as climate, hydrology and socio-economics, which in turn influence each other. However, there are few studies that integrate these elements in order to assess ecosystem services. Absence of integrated approach to modelling hydrological and land-use changes, for instance, often oversights the dynamic feedback between the two processes. Dynamic changes in land-use should be fed into hydrological models and vice-versa at each time-step for a more realistic representation. In this study, this approach is demonstrated with a case study of the uThukela catchment, South Africa. There is …

Ontology Mapping In Semantic Time Series Processing In Climate Change Prediction, Bojan Božić, Jan Peters-Anders, Gerald Schimak

International Congress on Environmental Modelling and Software

In today's time series processing there is more and more a need for addressing diverse user groups interested in a specific domain with appropriate user tailored time series data. The complexity of time series (e.g. involved data from different data sources and/or domains, visualization and representation, etc.) is growing rapidly. As a consequence, it means that users need to find a path through the jungle of time series data. After we have presented our concepts for semantic time series filtering and enrichment of time series with meta-information and annotations (Božić et al., 2012), we are now going to present a …

Metadata Extraction Using Semantic And Natural Language Processing Techniques, Rob Knapen, Thomas Hüsing, Klaus Jacob, Yke Van Randen, Stefan Reis, Onno Roosenschoon, Sander Janssen

International Congress on Environmental Modelling and Software

The World Wide Web and related technologies are playing an increasing role in the field of Integrated Environmental Modelling (IEM). Model integration software frameworks are more and more becoming web-enabled. The technologies and standards of the Web are used to access and run simulation models remotely (known as the Web of models) and are considered for enabling interoperability across model integration frameworks. Furthermore there is a growing number of local and global initiatives to provide open access to environmental data (Web of data) that can potentially be used as input for the scientific models. The availability of descriptive information of …

Improved Implicit Stochastic Optimization Technique For Multireservoir Water Systems Under Drought Conditions, Andrea Sulis

International Congress on Environmental Modelling and Software

Drought is a creeping phenomenon, making its onset and end difficult to determine. Damages from droughts can exceed those resulting from any other natural hazard, although it is difficult to assign a monetary value to them. In the Mediterranean area a severe drought period occurred over the years 2000-2002 and economic losses from that drought exceeded 250 million euros in Sardinia (Italy) (source: ENAS Regional Water Authority). Currently, technological developments and environmental modelling tools are improving our ability to more effectively manage water supply systems. Models can provide decision makers with better and more timely data and information. In this …

Challenges/Advances In Distributed Watershed Modeling: A Review And Application Of The Agroecosystem-Watershed (Ages-W) Model, James C. Ascough Ii, Timothy R. Green, Olaf David, Holm Kipka, Gregory S. Mcmaster, Manfred Fink, Peter Krause, Sven Kralisch

International Congress on Environmental Modelling and Software

Progress in the understanding of physical, chemical, and biological processes influencing water quality, coupled with advances in the collection and analysis of hydrologic data, provide opportunities for significant innovations in the manner and level with which watershed-scale processes may be quantified and modeled. This paper first provides a brief review of current challenges and advances in distributed watershed modeling including quantifying and coping with the uncertainty, data availability, influence of data resolution and scaling issues, and the use of environmental modeling frameworks that help maintain model modularity, reusability, and interoperability (or compatibility). Important findings and observed trends from this work …

Linking A Modified Epic-Based Plant Growth Model (Upgm) With A Component-Based Watershed Model (Ages-W), Gregory S. Mcmaster, James C. Ascough Ii, Debora A. Edmunds, Olaf David, Larry E. Wagner, Fred A. Fox, Robert H. Erskine, Holm Kipka, Timothy R. Green

International Congress on Environmental Modelling and Software

Agricultural models and decision support systems (DSS) for assessing water use and management are increasingly being applied to diverse geographic regions at different scales. This requires models that can simulate different crops, however, very few plant growth models are available that "easily" can simulate the growth of many common and alternative crops. One option available is a suite of plant growth models based on the original plant growth model used in EPIC (Erosion Productivity Index Calculator). Various versions of the original EPIC plant growth model have been used in other agroecosystem models such as the Wind Erosion Prediction System (WEPS), …

Assessing The Transition To A Low-Carbon Economy Using Actor-Based System-Dynamic Models, Dmitry V. Kovalevsky, Klaus Hasselmann

International Congress on Environmental Modelling and Software

For a comprehensive analysis of climate mitigation policies, Integrated Assessment models (IAMs) of the coupled climate-socioeconomic system are needed. However, while there is general agreement on the physics of the climate system, the dynamics of the socioeconomic system is still the subject of considerable controversy. This has become particularly apparent since the recent global financial crisis. To explore the dynamics of the socio-economic system, a family of socio-economic models is proposed that incorporates the various alternative assumptions regarding the behaviour of the different economic actors that govern the evolution of the socio-economic system. The model family needs to be developed …

Enhancing The Policy Relevance Of Scenarios Through A Dynamic Analytical Approach, Céline Guivarch, Vanessa Schweizer, Julia Rozenberg

International Congress on Environmental Modelling and Software

We present a new dynamic analytical approach for studying scenarios produced by an integrated assessment {IA) model. Our approach involves the analysis of a large number of scenarios, which can better address three principal shortcomings of how uncertainty is traditionally handled in IA scenario studies. The shortcomings are all a result of the prevailing practice of investigating a small number of scenarios and include (1) the ad hoc nature of exploring vast socioeconomic uncertainties with only a small number of scenarios; (2) the conventional representation of alternative scenario typologies as "parallel universes• or "diverging universes•, which provide little insight on …

Development Of A Decision Support Tool To Allocate Irrigation Water On Competitive Basis: Application To Kathiraveli Village, Sri Lanka, Tom Le Cerf, Muhammed A. Bhuiyan

International Congress on Environmental Modelling and Software

This paper focuses specifically on the irrigation field and water supply tanks for ways to improve efficiency of water use and increase the resilience to climatic variability. The purpose of this paper is to develop an excel-based water balance model that will allow the maximum cropping area be planted in the upcoming agricultural season. The model consists of three modules: a crop water requirement calculator that allows the water requirements of specific crops to be compared, a water tank balance model, and a model which simulates the storage in the permanent wetland attached to the irrigation tank. The hydrological computation …

Modelling Biofilm Based Technologies With Activated Sludge Unit Processes: A Short Cut To Performance Simulation?, Noella Jones, Maebh Grace, Eoghan Clifford

International Congress on Environmental Modelling and Software

Biofilm-based passive aeration systems (PAS) have attracted recent attention as alternative, energy efficient and low maintenance technologies in the wastewater sector. However the modelling of biofilm-based PAS offers unique challenges for modellers, particularly where new technologies are not easily simulated using existing commercial modelling software. However, if the modeller is concerned only with simulating "macro" plant performance (e.g. key effluent concentrations and cycle analysis) it may be possible to efficiently model these technologies using "surrogate" unit process systems (e.g. using an activated sludge process to model a biofilm process). The pumped flow biofilm reactor (PFBR); a batch biofilm technology, is …

A Best-Worst Scaling Model Of Climate Change Abatement By Australian Farmers, Marit E. Kragt, Nikki Dumbrell, Fiona Gibson

International Congress on Environmental Modelling and Software

Storing carbon from the atmosphere in terrestrial sinks has been proposed as an important way to mitigate climate change and is a major focus in Australia's climate change policies. Mitigation by changing agricultural practices is seen as a promising way to achieve significant reductions in C02 concentrations. Several policies therefore aim to stimulate farmers to adopt so-called 'carbon farming' practices. However, there is little information about farmers' ability and willingness to adopt carbon farming. We present a best-worst scaling model to analyse farmers' decisions about adopting climate change mitigating practices. Best-worst scaling data was collected through a survey amongst mixed …

Hypothesis Testing For Management: Evolving And Answering Closed Questions Using Multiobjective Visualization, Joseph Kasprzyk, Joseph Guillaume, Joshua Kollat, Chris Danilo

International Congress on Environmental Modelling and Software

In order to use models to understand deeply uncertain future conditions, managers must be able to pose and test hypotheses about their management problems. In Iterative Closed Question Methodology (ICQM), a series of closed questions are used to structure thinking about hypotheses while looking beyond a problem's existing modeling representation. Our research is exploring how ICQM can contribute to a framework called Many Objective Robust Decision Making (MORDM), which uses multiobjective optimization and ensembles of uncertain future states of the world to create and evaluate robust solutions for environmental management. A visualization software tool; AeroVis, has greatly aided implementation of …

The Virtual Learning Commons (Vlc): Enabling Sharing And Innovation For Flexible, Responsive Solutions, Deana D. Pennington, Alida Gándara, Nick Del Rio, Omar Ochoa

International Congress on Environmental Modelling and Software

A key challenge in modeling of complex natural systems is identifying and integrating models and tools that are relevant, but were not developed for the targeted purpose. Modeling resources are proliferating, along with emerging technologies designed to enable discovery and integration of data and models. The goal of the Virtual Learning Commons (VLC) is to improve awareness and understanding of emerging methodologies and technologies, facilitate individual and group evaluation of these for innovative uses, and trace the impact of innovations across research communities. The VLC is funded by the U.S. National Science Foundation, and will be released in 2014. The …

Designing Innovative Linked Open Data And Semantic Technologies In Agro-Environmental Modelling, Rob Lokers, Stasinos Konstantopoulos, Armando Stellato, Rob Knapen, Sander Janssen

International Congress on Environmental Modelling and Software

In recent years, innovative applications exploiting Linked Open Data (LOD) and the Semantic Web have opened up, combined and cross referenced high volumes of high-quality data and created tremendous new opportunities for data users as well as data providers. However, in order to serve the broadest community of users, technologies need to be developed that can manage large, constantly updated datasets and streams that are published in formats that were not designed with cross source linking in mind.

The EU-FP7 project SemaGrow aims to tackle this challenge by developing novel algorithms and methods for querying distributed triple stores, scalable and …