Civil and Environmental Engineering Commons^™

Computer Vision And Machine Learning Approaches For Defect Detection In 3d-Printed Cementitious Materials: A Systematic Review, Muhammad Ali Musarat, Ruben Paul Borg, Jingjie Wei, Carl James Debono, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

3D printing is evolving at a fast pace in both the manufacturing and construction sectors. These advancements can greatly benefit these industries. However, the 3D printing of concrete structures presents some challenges due to defects in the 3D concrete printed elements. Hence, this study systematically reviews Artificial Intelligence (AI)-driven techniques, such as Computer Vision and Machine Learning, to identify surface defects that can occur in 3D-printed cementitious material structures. The adopted methodology was the PRISMA statement with the aim of reporting the systematic review and meta-analysis. Two well-known databases, Web of Science and Scopus, were utilised for data extraction of …

An Investigation Of The Restrained Expansion Behavior Of Bcsa And Sbcsa Concretes And Their Chemical Prestress Potential, Adhish Paudel

Graduate Theses and Dissertations

Belitic calcium sulfoaluminate (BCSA) cement, an alternative cement, is increasingly used in the United States for its fast-setting and rapid strength gain characteristics, particularly for rapid pavement construction and repair. In addition, BCSA exhibits some early age expansion when moist cured due to the formation of ettringite. Under restrained conditions, expansive cements can be used to generate chemical prestress in reinforced concrete or to offset prestress losses in prestressed concrete. This study investigates the restrained expansion of concrete made from traditional BCSA and a new BCSA cement formulation intended to provide increased initial expansion behavior. Concrete samples were tested using …

Assessing Diffusive Gradients In Thin Films Passive Samplers For Pfas Quantitation In Aqueous Systems, Brianna Harris

Graduate Theses and Dissertations

Diffusive gradients in thin-films (DGT) passive samplers are an alternative to grab sampling for quantifying time-weighted average (TWA) concentrations of per- and polyfluoroalkyl substances (PFAS) in aqueous systems. DGTs may enable long-term PFAS site characterization in a more time and cost-effective manner compared to grab sampling, but critical information is lacking in PFAS diffusion coefficient (DGel) uncertainty, PFAS quantitation limits, and environmental impacts on DGT performance. This work provides a thorough evaluation of DGT performance for a suite of 32 PFAS through (i) determining gel-layer PFAS diffusion coefficients and their associated error (i.e., 95 % confidence intervals (CIs)), (ii) assessing …

An Evaluation Of Leading Indicators In The Construction Industry And Their Relationship With Incident Rates, Kitti Miller Whalen

All-Inclusive List of Electronic Theses and Dissertations

Improving safety programs has been a focus of organizations for decades. Historically, focus has been directed towards lagging indicators such as recordable incident rates and experience modification rate (EMR). While these remain beneficial, they are only one component of the broader framework. In recent years, companies have started to examine what occurs prior to an incident, which are known as leading indicators. The research into leading indicators is promising, however research into the area is limited. The focus of this study is to identify which leading indicators are most strongly associated with improved incident rates in the construction industry specifically. …

A Comparative Analysis Of Macro-Scale And Micro-Scale Pcswmm Models For Urban Flood Simulation In The Ormond Drainage System, Binit Gautam

LSU New Orleans Theses and Dissertations

This research utilized an existing SWMM modeling framework of the Ormond area within St. Charles Parish, Louisiana. A micro scale PCSWMM model was updated using GIS Derived values for CN, percent imperviousness, and subcatchment slope and compared to an macro-scale model. Models were compared under several storm events, which included the recent May 14, 2020 storm as well as 2-, 10-, and 100-year design storms. Peak flow, total inflow volume, and hydrograph characteristics were analyzed to assess response of each model.

The results show that the macro-scale model generally produces higher peak flows and total volumes, while the micro-scale model …

Behavior Of A Mildly Skewed Network Tied-Arch Bridge During Construction And Early Service Life, Harsha Amunugama

Dissertations

This dissertation work investigated the structural performance of the 2nd Avenue Bridge in Detroit, Michigan, the first skewed, unbraced network tied-arch bridge in the U.S. The 245-ft long, 96.5-ft wide bridge features an 18-degree skew. The bridge was constructed using accelerated bridge construction (ABC) techniques, including off-site fabrication at a bridge staging area (BSA) and installation via self-propelled modular transporters (SPMTs) and lateral launching, enabling the completion of construction with minimal disruptions to I-94 traffic and improved safety.

Given the unique structural configuration of the bridge, the use of innovative construction techniques, and differences observed in structural responses predicted by …

Developing Fragility Curves For Steel Special Moment-Resisting Frames In Utah, Olivia P. Murphy

All Graduate Theses and Dissertations, Fall 2023 to Present

Major seismic events along the Wasatch Fault represent a serious threat to Utah's residents and built environment. Engineers currently rely on a statistical approach that calculates earthquake ground shaking based on probabilities of various events occurring over extended time periods. This method informs how strong new buildings must be constructed. However, many structural engineering professionals in Utah worry that this probability-based approach may significantly underestimate the actual ground shaking compared to an alternative method that examines the largest possible earthquake a fault can generate. The substantial differences between the two analytical approaches raise fundamental concerns about whether existing construction standards …

Design And Performance Overview Of The Inaugural University Of Arkansas Beng Fountain Wars Team, Autumn Jones

Biological and Agricultural Engineering Undergraduate Honors Theses

This honors thesis describes the engineering design process for the first ASABE Fountain Wars submission by a student team at the University of Arkansas in over a decade. Fountain Wars has a technical and aesthetic task, and the focus of this thesis is the design of the technical task. In 2025, this task was the “shoot out.” The objective was to get objects from a small pool into two 5-gallon buckets 10-15 feet away. The power for initiating the launch had to be provided by the pump. The objects were required to start at the surface of the water.

The …

Dried Water Treatment Residuals Might Be An Option To Reduce Soluble Reactive Phosphorus Release From Soils, Katie B. Mckay

Biological and Agricultural Engineering Undergraduate Honors Theses

Nonpoint source pollution from agricultural landscapes contributes to freshwater eutrophication, with legacy phosphorus (P) in soils potentially driving soluble reactive phosphorus (SRP) losses to surface waters. The objectives of this study were to evaluate SRP adsorption by dried water treatment residuals (WTRs) produced by Beaver Water District, quantify reductions in soil SRP release across increasing WTR application rates, and compare dried WTR performance to prior WTR studies.

Dried WTRs (~98% solids) were assessed using batch sorption experiments and soil core incubations. Phosphorus sorption was measured by mixing WTRs with CaCl₂ solutions containing increasing SRP concentrations and fitting results to …

Monitoring Streambank Morphology Using Iphone Lidar Technology, Lily C. Stitt

Biological and Agricultural Engineering Undergraduate Honors Theses

Monitoring stream morphology is crucial for maintaining the health and safety of fluvial environments, particularly as these naturally dynamic systems are shifted out of equilibrium due to climate and land-use change. Quantifying changes in stream geometry are useful for infrastructure design, water quality assessment, water resource management, and stream restoration, among other applications. Traditional stream surveying methods contain numerous cost limitations that inhibit affordable and accessible stream surveying needed for evaluating stream geometry with high accuracy and larger spatial scales (>100s of ). In recent years, several advancements have been made in the use of Light Detection and Ranging …

Effects Of Subsurface-Drip-Irrigation On Alfalfa Evapotranspiration In The Intermountain West, Namuna Dhakal

All Graduate Theses and Dissertations, Fall 2023 to Present

Alfalfa is one of Utah’s most important crops, but it is also the largest agricultural consumer of water. Because the state faces frequent droughts and growing pressure on limited water supplies, farmers and water managers are increasingly interested in irrigation systems that could reduce water use. Subsurface drip irrigation (SDI), which delivers water directly to plant roots through buried drip lines, has shown promising results in other regions, where it often reduces water consumption and increases yield. However, little research has evaluated SDI under Utah’s unique climate, soils, and high-elevation valleys.

This study compared an SDI system with a traditional …

Development Of A Laboratory Apparatus For Evaluating Infiltration Performance Of Filter Strips In Utah, Pranish Dahal

All Graduate Theses and Dissertations, Fall 2023 to Present

Stormwater from Utah’s roadways often carries pollutants such as oil, metals, and sediments, especially during small storms when runoff is not diluted. Vegetated filter strips—areas of soil and vegetation placed alongside roads—are one of the most effective ways to capture and clean this runoff before it reaches rivers and lakes. However, choosing the right combination of topsoil and base soil for these filter strips is difficult, expensive, and traditionally requires multiple field visits.

This thesis introduces a laboratory device that allows engineers to test how different soil combinations absorb and filter water without having to go to the field each …

Comparison Of Consumptive Use Of Furrow And Drip Irrigated Onions, Chad C. Withers

All Graduate Theses and Dissertations, Fall 2023 to Present

The State of Utah funded agricultural water optimization studies to determine how agricultural water depletion can be decreased while maintaining or improving yields. Conversion from surface irrigation to drip irrigation is investigated as a method to decrease consumptive use.

Some Utah onion producers are converting from furrow irrigation to drip irrigation to decrease water and fertilizer use and improve profits. This study compares the consumptive use and yield of three drip irrigated onion fields against the consumptive use and yield of three furrow irrigated onion fields.

Arrays of soil moisture sensors at various depths were placed in drip and furrow …

Evaluation Of Radar-Derived Polarimetric Precipitation Estimates For Extreme Rain Events Using A Dense Network Of Rain Gauges, Bong Chul Seo, Witold F. Krajewski, James A. Smith, Alexander V. Ryzhkov

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The study evaluates radar-based quantitative precipitation estimations (QPEs) for 10 extreme rain events that occurred between 2013 and 2019 in the Kansas City metropolitan area, United States. These precipitation estimates were derived at hourly and approximately 0.5-km scales using two polarimetric QPE algorithms}one based on specific attenuation (A) and the other on specific differential phase (KDP)} for the study area covered by two overlapping radars in Topeka, Kansas, and Kansas City, Missouri. The polarimetric QPE assessment for extreme rain events was motivated by improved flood forecasting and precipitation frequency analysis. The analysis utilizes ground reference observations from a dense network …

Assessment Of Lake Water Quality Parameters Using Uav Hyperspectral Imaging, Hasanul Banna, Taufiqa Tajnin

Publications and Research

Monitoring water quality in lakes is critical for assessing ecosystem health, managing drinking water resources, and detecting harmful algal blooms. Unmanned Aerial Vehicle (UAV)–based hyperspectral imaging provides a promising approach for high-resolution observation of water quality parameters. In this undergraduate research project, hyperspectral imagery collected over sample lakes within the Delaware River Watershed was processed using BaySpec’s CubeStitcher software to assess its capability to detect variations in chlorophyll-a (Chl-a) concentrations. This work was conducted as part of a National Fish and Wildlife Foundation (NFWF)-funded project in collaboration with Princeton Hydro and NYC College of New York. Hyperspectral image cubes were …

Model Stormwater Standards 2026, Unh Stormwater Center

UNH Stormwater Center

The purpose of post-construction stormwater management standards is to provide reasonable guidance for the regulation of stormwater runoff to protect local natural resources from degradation and prevent adverse impacts to adjacent and downstream land, property, facilities, and infrastructure. These standards regulate discharges from stormwater and runoff from land development projects and other construction activities to control and minimize increases in stormwater runoff rates and volumes, soil erosion, stream channel erosion, and nonpoint source pollution associated with stormwater runoff.

Thermo-Hydro-Chemical Coupled Numerical Modeling Of Hydrogen-Thermal Co-Development In Hydraulically Fractured Peridotite, Jiacheng Dai, Zhonglin Ma, Yunzhi Yue, Yujie Yuan, Shouceng Tian

Research outputs 2022 to 2026

Hydrogen generation through serpentinization reactions in peridotite formations under high temperature conditions represents a promising avenue for subsurface hydrogen production. However, the thermal energy in the formation environment have not been sufficiently considered. To integrate hydrogen production with thermal energy development, this study develops a thermo-hydro-chemical coupled numerical model, which is used to investigate hydrogen-thermal co-development in hydraulically fractured peridotite. Given that the hydrogen-thermal co-development process involves fluid flow, heat transfer and serpentinization reactions, the governing equations are formulated based on Darcy flow and energy conservation equations, with serpentinization kinetics incorporated through the reactive source terms. To evaluate hydrogen production …

Exploring The Role Of Video Games In Civil Engineering Education And K-12 Stem Engagement, Jillian S. Codron

Architectural Engineering

Civil engineering education has traditionally emphasized a linear progression from theory to application, with foundational concepts introduced in lecture before being reinforced through laboratory or design experiences. While effective for advanced learners, this approach can limit early engagement for K–12 students who may struggle to connect abstract principles to realworld engineering practice. This project examines the use of video games as interactive, feedback-driven environments for introducing civil engineering concepts and practices to younger learners in more exploratory and accessible ways.

The study pursues four primary objectives: evaluating the educational affordances of selected video games; examining how gaming experiences have influenced …

Computational Fluid Dynamics Modeling Of Counter-Current Flow In Channels Separated By A Membrane, Akram Mashhour Riziq Abdullah

Graduate Theses and Dissertations

Counter current flow in channels separated by membrane were studied in several published studies. The present study aims to numerically and analytically simulate and physically describe the distribution of pressure, volume flow rate and velocity in counter current flow module. Numerical simulation Computational fluid dynamics (CFD) was performed by solving Navier-Stokes (N–S) equations in the channels and membrane pores (vertical channels) to determine pressure and velocity fields. An analytical solution one-dimensional (1-D) model was developed to simulate the flow in the channels and membrane pores by solving the continuity and Darcy’s Law to obtain pressure and volume flow rate. Accordingly, …

Investigating Calcium Oxychloride Deterioration In Concrete: Analyzing Variation In Laboratory Testing Procedures, Standardized Testing Protocols, And Industry Implementation., Joey Roy Parker

Graduate Theses and Dissertations

Abstract Access to sustainable infrastructure is critical for society. In the U.S., over $350 billion is spent annually to maintain roadways providing access to education, medical care, and citizen consumer needs. Maintaining service of these systems during severe winter weather events is a significant challenge for maintenance personnel across the country. The use of deicing/anti-icing materials to lower the freezing temperature is a popular mitigation technique used to provide reasonable driving conditions during these times. The combination of these materials, freeze/thaw cycles, and precipitation produce perpetual deterioration and corrosion within reinforced concrete pavements and bridges. In the U.S., over 60% …

A Review Of Ufgs And Ufc Specifications For The Mixture Design Process Of Military Airfield Concrete Pavements, Emaduddin Ahmad

Graduate Theses and Dissertations

Military airfield concrete pavements require exceptional durability and performance, guided by the stringent criteria of the Department of Defense (DoD) Unified Facilities Criteria (UFC) 3-25-04 and Unified Facilities Guide Specifications (UFGS) 32 13 14.13. Currently, the mixture design approval contains severe pre-construction bottlenecks, primarily due to comprehensive requirements of testing all aggregate sources within six months of project commencement. This rigid approach forces redundant and time-consuming laboratory tests, such as the ASTM C666 freeze-thaw durability test, to be conducted even when utilizing consistent aggregate sources. This thesis reviews the current UFGS mixture design process to identify critical bottlenecks in the …

Enameling Coating Of Pipes: Thermal Proprieties And Corrosion Tests, Signo Reis, Genda Chen, Mike Koenigstein, Liang Fan

Materials Science and Engineering Faculty Research & Creative Works

Enamel coating on pipelines can be done in several ways such as the wet process, plasma spray, and electrostatic process. Wet process requires little capital expenses and provides an acceptable finish for industrial applications particularly when the part to be coated is small. Electrostatic process of enamel powder is most promising to coating large pipelines in field conditions. The enamel coating applied by the electrostatic process is very consistent and smooth since each particle is glass only. However, the powder is very fragile until fired and the charge retention is lowered in high humidity conditions. Coupons cut from a full-size …

Sb 1953 Field Execution Under Hcai Oversight: Seismic Retrofit At Zsfg Building 5, Victor Lucas

Construction Management

Every hospital in California must be seismically compliant by 2030 under Senate Bill 1953, which is enforced by the Department of Health Care Access and Information (HCAI). HCAI approves and inspects all hospital construction in the state, and its authority reaches into the field, so a contractor cannot simply build to an approved drawing the way it would on a commercial job. This paper explains how that approval system governs the work, written for construction professionals entering hospital work in California whose experience to that point has been commercial. It uses the ZSFG Building 5 Voluntary Seismic Upgrade, a 1976 …

Preconstruction Services For Slo Youth Baseball Bull Pen And Batting Cage, Sofia E. Cuevas

Construction Management

San Luis Obispo Youth Baseball is a nonprofit organization servicing the local youth of San Luis Obispo, California. Offering recreational, all-star, and club programs, SLO Youth Baseball provides the experience of baseball to all levels of skill in the community. In preparation for the Spring 2026 season and beyond, SLOYB has proposed the construction of a bull pen and batting cage on the third base line at their very own Stockton Field. In order to service the community at large, this design came with a set of strict parameters: accessibility, longevity, and serviceability. In doing so, SLOYB has requested flexibility …

Sheep Pen Improvements At City Farm Slo, Ryan S. Bodmer

Construction Management

City Farm SLO is an urban non-profit educational farm located in San Luis Obispo, CA. It serves the community through offering farm learning programs, including hands-on experience in sustainable farming practices and livestock care. This project, completed over the winter and spring quarters, focused on delivering an upgraded sheep pen to improve access and safety for both volunteers and sheep. The project consisted of developing design plans, coordination of materials and allowable working times with the owner, where the animals were either moved out of the working area or when work would not jeopardize animal health, schedule creation, cost estimates, …

Skip The Grid: Turning Solar Planning Into Power For Navajo Nation Homes, Alexandr B. Miller

Construction Management

Skip the Grid is a cross-disciplinary experiential learning initiative that delivers clean energy infrastructure to households with school-age children residing in the Navajo and Hopi Nations. In March 2026, a cohort of 23 students drawn from five academic programs at California Polytechnic State University (Cal Poly) joined forces with Heart of America (HOA), SOLV Energy, and NextPower to carry out the initiative's fifth consecutive year. The program aimed to enhance living standards and bolster academic achievement by ensuring dependable access to power, illumination, and food preservation in resource-limited communities. Participants were divided into five installation teams comprising Cal Poly students, …

Dirt Finder (Drtfndr): A Marketplace Application For Construction Earthwork, Evan A. Reed

Construction Management

The construction industry regularly produces a surplus of earthwork materials: clean fill, topsoil, gravel, and crushed concrete, that are disposed of at considerable cost. All the while, contractors actively seek those same materials, and no dedicated digital platform existed to connect these two groups efficiently. DrtFndr ("Dirt Finder") is a mobile-first web application developed to address this gap, providing a marketplace where contractors can post available or needed earthwork materials, browse geographically filtered listings by material type and proximity, and connect directly with other users. The application was built using Base44, an AI-powered application development platform, and includes real-time mapping, …

In-Operando Imaging For Mechanistic Insights And Process Optimization In The Biofuel-Driven Combustion Synthesis Of Cement And Precursor Phases, Shubham Agrawal, Jeffrey J. Long, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

Biofuel-based combustion synthesis (BCS) is a promising low-carbon pathway for decarbonizing cement production, providing an alternative to the fossil-fuel-driven clinkering process typically conducted at ∼1450 °C. Understanding microscale combustion mechanisms is essential to efficiently transfer biofuel-generated heat to cement precursors for targeted phase formation. Unlike previous studies focusing on macro-scale parameters such as fuel content/type, porosity, and holding temperature, this work provides mechanistic insights into microscale combustion behavior, linking microstructural phenomena with macro-scale processing conditions to guide parameter optimization. In-operando microscale imaging was employed to examine combustion wave propagation, spatio-temporal temperature evolution, and microstructural transformations within reactive pellets. Two combustion …

Exploring Determinants Of Value For Money And Bundling Effects On Public–Private Partnership Projects: A Data-Driven Empirical Study, Gaurav Khadka

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Public–private partnerships (P3s) are widely used to deliver public infrastructure, yet current understanding of what drives variation in Value for Money (VfM) and the effectiveness of project delivery strategies such as bundling remains largely conceptual and grounded in perception-based evidence. Consequently, governments lack empirically validated guidance on which project, financial, and macroeconomic conditions meaningfully influence VfM outcomes and whether bundling improves project performance within the P3 context. This study addresses these gaps through an integrated analysis of 180 Canadian P3 infrastructure projects (1992–2020), one of the most comprehensive datasets of realized VfM internationally, incorporating project characteristics, financial arrangements, and macroeconomic …

Factors Affecting Pedestrian-Vehicle Conflicts: An Empirical Analysis, Christo D. Jamo

Honors Scholar Theses

The number of pedestrian deaths increased by 78% between 2009 and 2023, while other motor vehicle crash deaths increased by 13% in the same period [1]. To identify potential pedestrian safety measures, this study analyzed the effects of location-based demographics, pedestrian phasing type, and other physical infrastructure and behavior variables on the probability of pedestrian-vehicle conflicts at signalized intersections, which is a surrogate measure of crash risk. Data were collected from 55 intersections in Connecticut, and the pedestrian-vehicle interactions were classified by severity based on the Swedish Traffic Conflict Technique: undisturbed passage, potential conflict, minor conflict, or serious conflict. Because …