Civil and Environmental Engineering Commons^™

User Acceptance Of Shared Autonomous Vehicles, Haotian Su

All Dissertations

A dissertation is proposed to explore user acceptance of shared autonomous vehicles (SAVs). SAVs are facing limited user acceptance. To systematically tackle the user acceptance barriers of SAVs, the main problem can be disintegrated into two sub-problems of user acceptance of autonomous vehicles (AVs) and ridesharing. The comfort of the ride experience in AVs is a determinant of user acceptance. Understanding the influential factors and developing methodologies to quantify human comfort in AVs are essential to facilitating future research to improve human comfort in AVs. The current pooled rideshare (PR) service closely resembles the anticipated future of SAVs. Understanding why …

Ceramic Membrane Evaluation Via Automated Filtration Systems For Water Treatment And Resource Recovery, Weiming Qi

All Dissertations

Membranes are an advanced and mature water and wastewater treatment technology. Membrane fouling is a key difficulty for all membrane filtration processes, leading to significant attention in the literature over the years. A common problem in laboratory-scale membrane research is that the testing methods in the laboratory are often quite different than industrial applications due to the limitations of manual experimental setups. An automated membrane filtration apparatus was built in the lab to solve this problem by allowing long-term filtration, frequent backwash and CIP, and high-accuracy operation. The filtration system achieves different cleaning strategies for both theoretical research and practical …

Integrating Artificial Intelligence For Transportation Cyber-Physical Systems: From Detection To Cyber Resilience, Reek Majumder

All Dissertations

This dissertation investigates different methods for methane detection using unmanned aerial vehicles (UAVs). The author addresses the fundamental problem of methane emissions, a potent greenhouse gas responsible for global warming. The first part of the dissertation aims to create a cost-effective system for real-time methane detection and intensity prediction using ensemble learning models trained on meteorological parameters. The ensemble learning-based classification models show a high accuracy for methane detection.

The second part of the dissertation investigates cyberattack detection for UAVs using a graph-based intrusion detection system (IDS) for controller area networks (CAN). This lightweight, protocol-independent IDS uses graph-based machine learning …

Influence Of Terrain Model Resolution On Rockfall Dispersion And Tortuosity Of Rockfall Paths, Lucas Jason Arsenith

Boise State University Theses and Dissertations

The geology of the Snake River Plain region of southwestern Idaho contains terraces formed from downcutting of the Boise River and columnar jointed basalt cliffs from lava flows. Within the city limits of Boise, Idaho, rockfall events originate from these columnar jointed basalt cliffs. Whitney Terrace, a rockfall-prone location in southwestern Boise, was chosen as the study site. Site-specific LiDAR data was used to create a bare earth terrain model, and rockfall boulders were geolocated and measured to be used as inputs into rockfall models. The slope below the cliff face was divided into four distinct slope zones, each with …

Kinetic Growth Rate Analysis Of Coelastrella Sp. In Aquaculture Wastewater., Rob Skarvan

Master of Engineering Theses

The demand for sustainable food and energy production continues to rapidly rise. Utilizing aquaculture wastewater as microalgae growth medium is a potential opportunity for nutrient recycling and industrial symbiosis, but more research is required to understand how best to design and scale-up a dual-purpose facility. This study investigates the growth of Coelastrella sp. in aquaculture wastewater compared to industry-standard growth medium BG-11 and modified tap water as controls. Though cell size and pigment density varied throughout media, aquaculture wastewater performed very comparably to BG-11 as a microalgae culture broth.

The Monod equation can model Coelastrella sp. growth based …

Selecting Green Wall Adoption Best Solutions Using Optimization: Addressing Barriers And Maximizing Benefits, Samar Nadeem

Theses and Dissertations

This research explores the potential of green walls as a sustainable solution to mitigate urban challenges and align with global climate change objectives. Despite their ecological and social benefits, green wall implementation faces significant barriers, hindering their adoption. Consequently, this study aims to develop a comprehensive framework to identify the obstacles, propose feasible solutions, and provide actionable strategies for promoting green walls. This framework incorporates an optimization model specifically designed for government-led solutions, evaluating their feasibility based on administrative feasibility, community acceptance, technical feasibility, industrial acceptance, and long-term adoption potential. By quantifying and prioritizing solutions based on their cost, feasibility, …

Use Of Pushed-In Pencel Pressuremeter Test For Shallow Foundation Design In Florida Fine Sands, Brhane Weldeanenya Ygzaw

Theses and Dissertations

A comprehensive evaluation was conducted on the performance, consistency, and practical application of various in-situ geotechnical testing methods for predicting the settlement and bearing capacity of shallow foundations in Florida’s fine sands. The methods assessed include the Standard Penetration Test (SPT), Cone Penetration Test (CPT), Dilatometer Test (DMT), pushed-in PENCEL Pressuremeter Test (PPMT), and the pre-bored TEXAM Pressuremeter Test. A dual approach controlled indoor testing at the FDOT State Materials Office (SMO) and field investigations at three representative sites (Kingsley, Trenton, and the UCF research site), formed the experimental foundation.

Over thirty settlement prediction techniques and thirteen bearing capacity estimation …

The Prototype Of A Fully Automated Pressuremeter For Various Geotechnical Applications, Anuar Akchurin

Theses and Dissertations

The geotechnical engineering field requires high-quality in-situ testing equipment that ensures consistency in the test execution. This research focuses on developing and testing a prototype of a fully automated pressuremeter control unit to allow the industry to obtain reliable and controlled stress-strain data, thereby improving efficiency and reducing testing time.

The objectives of this work are to design and develop a system with the necessary components to perform the pressuremeter test, integrate the testing procedure into the state machine design, enable automated testing, and validate the results by comparing the stress-strain data with that obtained from the existing hand-operated pressuremeter …

Estimation Of Breach Hydrograph Resulting From Dam Embankment Failure Due To Internal Erosion Or Overtopping: Comparison Of Simplified Methods With Real-Case Failure Data And Recommendations, Laurent Del Gatto, Jean-Robert Courivaud

5th International Seminar on Dam Protections Against Overtopping

The opening of a breach in an embankment dam, whether due to overtopping or internal erosion, is a critical failure mode for these structures. Estimating the resulting breach hydrograph is essential for assessing downstream risks. While no universal physical model covers all dam types, empirical formulas are commonly used. EDF analyzed 14 such formulas, comparing them with rupture data from 32 embankment dam failures. The best formulas - Froehlich 1995, Xu & Zhang 2009, and CLF 2020 - yield a “best estimate” for peak flow. However, due to variability, results should be interpreted cautiously. Consider estimating breach characteristics like width …

Breach Modeling Flume Tests, R. M. Monteiro-Alves, R. Moran, M. Á. Toledo, M. Morris, C. Picault, J-R. Courivaud

5th International Seminar on Dam Protections Against Overtopping

From previous flume tests conducted in the framework of the OVERCOME Project, intended to investigate the effect of different soil materials, overflow discharges, and upstream face watertightness on the breaching processes of overflowed levee sections, we determined the need for further investigation on the effect of test repeatability, content of fines and armouring caused by the coarser particles. This document presents the results of this new set of tests which have shown an impact of these variables on the breach macro erosion processes, erosion rates and breach dimensions.

Development Of Low-Carbon Cementitious Composites With Volcanic Ash And Calcium Carbide Residue Using Carbonation Curing, Jad Samir Bawab

Thesis/ Dissertation Defenses

The production and use of cement and concrete is a major contributor to numerous environmental problems, primarily centered around high carbon emissions, extensive resource depletion, and vast waste generation. This thesis aims to develop and characterize low-carbon concrete by using volcanic ash (VA) and calcium carbide residue (CCR) as partial cement substitutes while exposing the cementitious composite to accelerated carbonation curing. The study is a multi-level assessment of the incorporated materials and curing method divided into four phases. The first stage studied and optimized the CCR content and carbonation curing parameters of carbonation-cured concrete. It was revealed that using 5% …

Physically Based Assessment Of Flow Resistance In Stepped Chutes, T. L. Wahl, B. J. Heiner, K. R. Smithgall, C. C. Shupe, J. Falkenstine

5th International Seminar on Dam Protections Against Overtopping

Existing physically based methods for estimating stepped chute friction factors or energy dissipation rates consider relative step height and relative step-tip spacing to be key factors, but do not fully account for chute slope and associated step orientation. For slopes steeper than 45° each step acts as an offset into the flow, while for flatter slopes each step presents an offset away from the flow, but methods that consider only the step-tip spacing do not account for this difference. Furthermore, most experimental studies have been performed in open channel spillway models, where two-phase air-water flow and variable flow depths make …

Ahead Of His Time? A Reanalysis Of The Air-Tunnel Stepped Chute Studies Of Marcos José Tozzi, T. L. Wahl, J. A. Higgs, J. Matos

5th International Seminar on Dam Protections Against Overtopping

Stepped spillways offer energy dissipation advantages and construction efficiencies over smooth spillway chutes. Energy dissipation is typically estimated using empirical relations that depend on chute slope, unit discharge and relative step height. Open-channel tests of model spillways experience self-aerated air-water flow downstream from the aeration inception point, and the presence of air dramatically affects energy dissipation and flow depth, making it difficult to separately determine the effects of step geometry and other basic flow properties. The 1992 doctoral dissertation of Marcos José Tozzi from the Polytechnic School of the University of São Paulo included open channel stepped spillway tests with …

Hydraulic Measurements In A Saf Stilling Basin With A Stepped Chute For Embankment Protection, B. M. Crookston, N. Young

5th International Seminar on Dam Protections Against Overtopping

Stepped chutes have become commonplace in embankment dam rehabilitation projects due to project economy, constructability, and improved chute energy dissipation. Consequently, for applications where a stilling basin is merited the interaction of stepped chutes and stilling basins is of high interest. A commonly used stilling basin type for many smaller embankment dams, the St. Anthony Falls stilling basin (SAF), has no specific hydraulic design guidance for use downstream of a stepped chute. Therefore, this study was conducted at the Utah Water Research Laboratory in a flume with 0.1 m tall steps, a total drop height of 1.8 m, and an …

Assessing A Solution For Ga Work Zone Safety Through Cross Classification, Asiah Lightfoot, Sunanda Dissanayake

Symposium of Student Scholars

Work zone safety is a health risk for drivers and construction workers. In Georgia, work zone crashes have decreased over the past 5 years, but the number of fatalities has still been over 1,000 each of those years. Studies have proven solutions such as lowering the speed limit or relying on current traffic control devices to be ineffective. The risks associated with these crashes must be recognized to improve upon previous solutions or innovate new ones from the results. The objective of this study is to utilize cross classification to identify factors that contribute to work zone crash deaths and …

2d Probabilistic Scour Model For Predicting The Time-Rate Of Scour For Spillways And Overtopping Dams Based On The Erodibility Index Method, M. F. George, G. W. Annandale

5th International Seminar on Dam Protections Against Overtopping

Time-dependent prediction of rock scour for dams and spillways has largely remained elusive given limited available data on rock erosion rate parameters in literature. Recently, a theoretical framework for determining the rate of rock scour was developed by Annandale (2025), enhancing the Erodibility Index Method (EIM). The EIM is the most commonly used and accepted approach for evaluation of scour in rock for dam applications. This theoretical framework has been incorporated into the 2D probabilistic jet impingement scour model (George & Annandale, 2023) so that scour progression due to head-cutting in a spillway channel (lined or unlined) or overtopping onto …

Building Resilience: Strategies For Sustainable Wildfire Management In California, Jaiden Rennie, Pegah Zamani

Symposium of Student Scholars

Wildfires in California are becoming more intense and destructive, threatening communities, ecosystems, and livelihoods. This project explores how resilience and sustainability can work together to reduce wildfire risks and long-term damage. By reviewing research, case studies, and expert insights, it examines what’s driving these fires, climate change, poor land management, and human activity, and looks at solutions that can make a real difference. From community education programs to AI-driven fire detection and smarter policies, the findings highlight practical ways to better prepare for and manage wildfires. The goal is to contribute to a future where communities and the environment are …

Development Of A Microcontroller-Based Intelligent Traffic Light Control System For Vehicular Movement In T-Junctions, Frederick O. Ehiagwina

Tanzania Journal of Engineering and Technology (TJET)

This research is devoted to the issue of regulating traffic congestion in major cities using light-dependent resistors coupled with the PIC16F877A microcontroller. This study proposes an intelligent traffic control system for T-Junctions, utilizing sensing and control to optimize traffic flow through dynamic phase adjustments and congestion reduction, enabled by a microcontroller-based decision-making system. The proposed system reduces traffic congestion, automates control, and enhances safety, minimizing accidents and lowering infrastructure costs. Under simulated environment, it demonstrates an average response time of 50 ms and achieves 99% accuracy in displaying the correct countdown. Finally, the number of state transitions handled per minute …

Comparative Analysis On Design Error Risks In Design-Bid-Build And Design-Build Construction Approaches, Eradius Edward Rwakarehe

Tanzania Journal of Engineering and Technology (TJET)

This study was conducted to compare design errors risk in Design-Bid-Build (DBB) (traditional) and Design-Build (DB) methods in building projects. Several construction projects under both DB and DBB method were reviewed. On most of construction projects under DB method, it was found that there were over supply of floor area due to different reasons. Also, it was found that, clients’ requirements were changed during project execution, which resulted into change on schedule, contract value and project quality. It was also revealed that in most cases, designs were in accordance with the clients’ requirements as submitted earlier but during construction clients …

Flood Inundation Mapping For The Tana River Delta In Kenya, Anne N. Mugatha

Tanzania Journal of Engineering and Technology (TJET)

This study aimed at mapping flood inundation areas in the Tana River Delta. The 30 m DEM and digitized streams and road networks data were collected through remote sensing techniques followed by ground truthing. The data used also included Tana River discharge data at Garsen gauging station. Probability distributions were fitted on the annual maximum discharges. The 4 parameter generalized Gamma probability distribution was the best-fitting distribution according to goodness-of-fit criteria and the Q-Q plots and was used to generate the flood quantiles for different return periods. The generated flood quantiles were; 286 m3/s, 369 m3/s, 400 m3/s, 405 m3/s, …

Microwave Ore Pre-Treatment Review And Process Flowsheet Conceptualization, Baker F. Giyani

Tanzania Journal of Engineering and Technology (TJET)

The global demand for mineral commodities has increased dramatically over the years, and this is largely due to several factors, including technological advancements, industrialization, and a rise in population. Further, the demand keeps increasing because the ore being mined is becoming more complex, and the feed grade is declining over the years, prompting the need for innovative technologies to treat such ores more efficiently. Microwave ore pre-treatment is one of the potential technologies that can be employed to improve process performance. This is possible because ores are composed of both good-microwave heaters and poor microwave heaters, which creates thermal stresses …

Skewed Approach Flow To The Spillway Of An Embankment Dam, C. I. Thornton, J. Ellis, F. Alsultan, C. Volt, R. Ettema

5th International Seminar on Dam Protections Against Overtopping

A contemporary activity in dam engineering is the raising of embankments to increase reservoir storage or flood level in a channel. For embankment dams, the raised position of the spillway must be located on a native soil/rock shoulder of the dam, to avoid geotechnical problems associated with possible embankment settlement. Consequently, for many sites, the approach flow entering a spillway likely will not be acceptably uniform, as the approach flow becomes increasingly skewed to reach the spillway’s entrance with the raised embankment. This concern raises the question of where to position the spillway’s ogee crest within the spillway entrance and …

Design Of A Wave Overtopping Simulator With Variability In Simulated Flows, N. Van Der Vegt, B. Hofland, J. J. Warmink, V. M. Van Bergeijk, S. J. M. H. Hulscher

5th International Seminar on Dam Protections Against Overtopping

A new experimental setup for conducting large- to full-scale wave overtopping experiments will be constructed at Delft University of Technology. This setup consists of an indoor Wave Overtopping Simulator (iWOS), a landward dike slope, and a transition to the toe. The iWOS, with a height of 3.25 meters, can release volumes of up to 2.67 m³/m of water. A key innovation is its controllable release valve, allowing variability in flow characteristics for the same overtopping volume.

The iWOS is designed based on established relationships between overtopping volume and flow characteristics at the landward crest of a dike. Computational Fluid Dynamics …

Enhancing Understanding Of Breach Processes Using Computational Fluid Dynamics And Laboratory Tests, K. V. Chua, M. Hassan, C. Goff, M. Morris, H. Haddad

5th International Seminar on Dam Protections Against Overtopping

Accurate prediction of dam breach processes is crucial for risk assessment and emergency response planning. Computational Fluid Dynamics (CFD) offers a powerful tool for simulating such complex phenomena. However, the reliability of CFD models hinges on their validation against experimental data. This paper compares numerical simulations by the open-source code, OpenFOAM, to laboratory flume experiments to assess the accuracy of its predictions of dam breach overtopping processes.OpenFOAM is first being used to model the flow characteristics of two key stages of a dam breach experiment that took place in a physical laboratory setup. The two stages are the surface erosion …

Conclusions From The Performance Assessment Of Industry Applicable Internal Erosion Initiated Breach Prediction Models, Mark W. Morris, Jean-Robert Courivaud

5th International Seminar on Dam Protections Against Overtopping

The EDF funded Performance Assessment of Industry Applicable IE Initiated Breach Prediction Models project was initiated with a workshop at HERU in Stillwater in October 2019. In the following 4 years a team of modelers comprising both model developers and industry model users analyzed the performance of 6 different breach modelling codes against a range of different data sets, including hypothetical, field and real dam failure case studies. Each of the data sets reflected a dam or levee failure initiated by internal erosion, and which subsequently developed into an open breach. Modelers were required to simulate breach formation from the …

Dust Analyses In Ventilation Ducts, Karolina Vyhlidalova, Petr Vlček, Olga Rubinová, Jiří Bernard

Journal of Sustainable Construction Materials and Technologies

The paper describes the importance of monitoring the dust in the atmosphere of human life. It deals with the issue of dust in air ducts, approaching the methods that can be used to detect the amount of dust. For conditions for buildings in the Czech Republic there is created the methodology of quantitative and qualitative evaluation of dust sediment for the needs of HVAC and other building surfaces. The scale for visual evaluation was created and it has been elaborated the assessment of kind of particles contained in dust.

Assessment Of Long Time Approximation Equation To Determine Thermal Conductivity Of High Porous Materials With Nss Probe, Hussein Humaish, Bastien Ruet, Laurent Marmoret, Hassen Beji

Journal of Sustainable Construction Materials and Technologies

Recent economic changes have increased the focus on energy conservation in buildings. Improve insulation represents one of the biggest challenge to save energy. The TP02 Huksefux® Non Steady State Probe (NSSP) has been used to determine the thermal conductivity of the building insulation materials. Usually, the long term approximation equation (linear form) is applied to determine the thermal conductivity when using hot wire techniques. Long term approximation has been successfully used to characterize glycerol: a fluid which doesn’t present contact resistance and porosity. But, an S-shaped appears for more porous materials. So to generalize the possibility of using this method, …

Can Computational Fluid Dynamics Be The Basis For The Next Generation Of Breach Models?, M. Hassan, K. V. Chua, C. Goff, S. Haeri, M. Morris, R. Coombs

5th International Seminar on Dam Protections Against Overtopping

Dam and embankment failures can have devastating consequences for communities, infrastructure, and the environment. Therefore, accurate modelling of dam and embankment breaches is crucial for effective flood risk assessment and emergency response planning to precisely estimate areas and people that are prone to risk and plan for reducing the damage to properties and the environment. Recently, many advances have been made to improve the accuracy of breach modelling, including the development of physically based one and two dimensional numerical models that takes into account the various processes that take place during the breach of an embankment dam or a flood …

Enhancing Embankment Dam And Levee Resilience Against Overtopping Erosion: The Muscatine Island Levee Project, W. R. Thompson, J. T. Leyh

5th International Seminar on Dam Protections Against Overtopping

HydroTurf® is an advanced revetment solution engineered to protect embankment dams and riverine levees from erosion caused by overtopping events. Its design provides an impermeable geomembrane protected by engineered turf with a high strength cementitious infill, resulting in a fiber reinforced high-strength concrete matrix. The system provides a durable and impermeable barrier against erosive forces.

The Muscatine Island Levee Improvement Project, situated along the Mississippi River in Iowa, exemplifies the application of HydroTurf. This initiative aimed to enhance flood protection for approximately 30,000 acres of commercial, industrial, and residential areas. A critical component was the construction of a hardened controlled …

The Overcome Project: Overall Perspective And Progress, Jean-Robert Courivaud, Mark W. Morris, Maxime Boucher, Laurent Del Gatto, Christophe Picault, Kamal El Kadi Abderrezzak, Rafael Morán Moya, Miguel Angel Toledo

5th International Seminar on Dam Protections Against Overtopping

The OVERCOME project is an applied research project that aims to provide the dam and dike engineering profession with an easy-to-use, physically based numerical tool that represents overtopping erosion and failure of homogeneous embankments made up of coarse-grained, gap-graded soils. This project began in 2018 and is scheduled for completion in 2028, and was initiated by EDF and CNR, who are the two main owners of embankment dams in France. To achieve this objective, the OVERCOME project is based on an extensive program of experimental tests of various dimensions. The interpretation of these tests will be used to define a …