Civil and Environmental Engineering Commons^™

Structural Dynamics Of Awt-27 Wind Turbine Blade, Amr Ismaiel

Future Engineering Journal

Wind energy is one of the world’s current leading renewable energy resources. One of the major aspects of studying wind turbines is the structural dynamics for the turbine structure including blades and support structure. In the current work, the blades of the Advanced Wind Turbine (AWT-27) are investigated in a dynamic approach. Different wind fields have been generated for the study to provide different Design Load Conditions (DLCs). Three laminar wind velocities of 5 m/s, 12 m/s, and 17 m/s were simulated. Turbulent wind flow fields have also been generated at the three standard classes A, B and C of …

Estimating The Weights Of Latticed Power Transmission Towers Using Genetic Programming, Ahmed M. Ebid Dr.

Future Engineering Journal

The recent booming in the power network industry inspired a lot of researchers to develop models to estimate the optimum cost of transmission towers. Unlike previous researches which depended on design the tower from scratch, this research depends on collecting actual database from several projects around the globe and applying the well-known (GP) technique to develop a model to predict the tower weight. The accuracy of the developed formula was about 84%. The developed model could be used in early tender stage or to check design economy.

Passive Radiative Cooling By Spectrally Selective Nanoparticles In Thick Film Nanocomposites, David Allen Young

USF Tampa Graduate Theses and Dissertations

Passive cooling of buildings is a benefit to society since no energy input is required for space cooling which reduces electricity consumption, fossil fuel burning, and greenhouse gas emissions. When a passive cooling technology radiates heat from the earth through the atmospheric windows to space higher levels of cooling power are possible -- this phenomenon is classified as passive “radiative” cooling. Spectrally selective surface coatings provide radiative cooling to lower surface temperatures by reflecting most solar radiation, while emitting infrared radiation at wavelengths between 8-13 μm through the primary atmospheric window to the cold of space. Multiple applications of radiative …

Development Of A Covid-19 Vulnerability Index (Cvi) For The Counties And Residents Of New Jersey, Remo Victor Disalvatore

Theses and Dissertations

The COVID-19 pandemic has impacted countless aspects of everyday life since it was declared a global pandemic by the World Health Organization in March of 2020. From societal to economic impacts, COVID-19 and its variants will leave a lasting impact on our society and the world. Approximately $9 trillion has been spent on fighting the pandemic around the world. During the pandemic, it became increasingly evident that indices, such as the Center for Disease Control (CDC) Social Vulnerability Index (SVI), were extremely important for predicting vulnerabilities in a community. The CDC's SVI provides important estimates on which communities will be …

Laboratory Assessement Of Emulsion-Cement Paste And Cold Recycled Mixtures At Varying Amounts Of Emulsion, Cement, And Water, Ahmed Saidi

Theses and Dissertations

The main objective of this study was to assess the performance of cold recycled mixtures (CRMs) at: (1) binder level through evaluating the rheological and mechanical properties of emulsion-cement paste (ECP), and (2) mix level through characterizing the density and performance of CRMs. The testing program for ECPs included multiple stress creep recovery (MSCR), bending beam rheometer (BBR), linear amplitude sweep (LAS), penetration test, and isothermal calorimetry. For CRMs, a balanced mix design (BMD) approach was used to develop performance interaction charts to select optimum contents of emulsion, cement, and water maximizing the resistance of CRMs to rutting and cracking. …

Fragmentation Of Chemically Herded Oil Slicks By Obstacles: Visualizations, Flow Measurements, And Spatial Distributions, Ali Alshamrani

USF Tampa Graduate Theses and Dissertations

Chemical herders are a promising technique for treatment of oil spills in icy waters at high latitudes. However, obstacles on the water surface such as floating ice affects or interferes with all spill response countermeasures including chemical herder operations by fracturing the contracting oil slick and trapping small oil patches. Chemical herders are likely to be especially useful in containing oil spills in remote, ice-infested Arctic waters, where using booms to contain an oil slick is difficult. Much of the previous research into chemical herder has focused on the effectiveness of different types of chemical herder agents to thicken oil …

Exploring Toluene Biosynthesis In Microbial Consortia Derived From Sediments And Superfund Site Groundwater, Raymond J. Poche

LSU Master's Theses

While the aromatic hydrocarbon toluene is widely regarded as a contaminant associated with discharges of crude oil and refined petroleum products (e.g., gasoline), the enzyme phenylacetate decarboxylase catalyzes the decarboxylation of phenylacetate to yield toluene. Research described in this thesis further investigated toluene biosynthesis by a microbial consortium originating from chlorinated solvent-contaminated groundwater near Baton Rouge, Louisiana. In anoxic growth media supplemented with phenylacetate as a precursor, toluene accumulation was found to be maximal at near-neutral to slightly acidic pHs (toluene accumulation greater than 1 mg/L at pH in the range of 5.6 to 7.6, but was not observed for …

Unconventional Water Resources: Global Opportunities And Challenges, Zahra Karimidastenaei, Tamara Avellán, Mojtaba Sadegh, Bjørn Kløve, Ali Torabi Haghighi

Civil Engineering Faculty Publications and Presentations

Water is of central importance for reaching the Sustainable Development Goals (SDGs) of the United Nations. With predictions of dire global water scarcity, attention is turning to resources that are considered to be unconventional, and hence called Unconventional Water Resources (UWRs). These are considered as supplementary water resources that need specialized processes to be used as water supply. The literature encompasses a vast number of studies on various UWRs and their usefulness in certain environmental and/or socio-economic contexts. However, a recent, all-encompassing article that brings the collective knowledge on UWRs together is missing. Considering the increasing importance of UWRs in …

Risks Assessment Using Structural Equation Modeling: Mega Housing Projects Construction In Egypt, Mohamed Nabawy

Civil Engineering

The Mega Housing Projects (MHP) construction in Egypt is saddled with numerous risks that emerged from the risk knowledge dearth, steering these projects to elusive failure apropos to completion time and construction cost. The research's novel contribution is a risk assessment Structural Equation Modeling (SEM) approach that spotlights the critical risk factors confronting MHP in Egypt concerning Probability of Occurrence (POO), Impact on Time (IOT), and Impact on Cost (IOC), from the contractors’ perspective. Forty-three risk factors were amassed from the literature and lessened to 25, delineating the significant risks impacting the MHP schedule and budget resentfully. The primary paper's …

Evaluation Of Aluminum Dissolution, Current Density, And Pitting Patterns During Electrocoagulation, Monica Castro Carias

USF Tampa Graduate Theses and Dissertations

Electrocoagulation (EC) is a sustainable water treatment process involving the generation of coagulants on-site through the application of a voltage on metal (usually aluminum or iron alloys). The factors that impact EC system performance have been well researched, however further research is needed on the factors that impact anodic dissolution of aluminum electrodes, especially when the technology is transferred to full-scale applications. Electrode fouling is one of the factors that can impact dissolution of the anode during EC due to the formation of a protective oxide/hydroxide layer on the electrode surface. Previous studies have addressed electrode fouling by reversing polarity, …

Degradation Performance Modeling And Optimal Maintenance Planning Of Deteriorating Critical Infrastructures, Hung Q. Nguyen

USF Tampa Graduate Theses and Dissertations

Serving as the backbone of the nation’s economy, a large and growing number of deteriorating critical infrastructures, such as transportation and water infrastructures, are underperforming, aging, becoming structurally deficient, and must be repaired or replaced. Due to the influence of a variety of factors (e.g., material structure, design, operation, and environmental conditions) at different phases of lifecycle and the costly data acquisition process, field degradation of deteriorating infrastructures is highly uncertain with limited degradation data. The co-location and spatial proximity between many infrastructures, such as road and water infrastructures, further makes them physically and operationally interdependent. The sheer deterioration of …

Simulating Flood Control In Progress Village, Florida Using Storm Water Management Model (Swmm), Azize Minaz

USF Tampa Graduate Theses and Dissertations

Flooding is a natural event caused by heavy rains, melting snow, high tides, and anthropogenic impacts such as channel clogging, improper land use, and deforestation. In this study, the strategies for controlling flooding seek to establish flood prevention systems by implementing grey infrastructure and green infrastructure practices. The main objective of this thesis is to analyze the study area, Progress Village Neighborhood in Delaney Creek Watershed, regarding flood risk and flood mitigation techniques. The analysis was performed using EPA SWMM 5.1 and Arcmap 10.7.1. The study used design storms,10-years 24 hours and 25-years 24 hours, to analyze flood risk in …

Impedance Analysis Of Anodized Aluminum And Structural Bridge Tendons, Justin Silnutzer

USF Tampa Graduate Theses and Dissertations

This is a two-part thesis with the overall investigation technique being electrochemical impedance spectroscopy (EIS). In the first part, EIS is used to estimate the layer thickness of anodized aluminum oxide. This required the development of an appropriate electrical circuit model; that with parameters that correspond to physical properties of the oxide. In this work, it was found that for thicker oxides of which the outer porous layer is greater than 12 microns, impedance may be used to estimate the outer layer thickness. However, further research is required to understand the role of outer porous layer structure on the impedance …

Cutting-Edge Technologies To Achieve A Higher Level Of Modular Construction – Literature Review, Seungtaek Lee, Jin Ouk Choi, Seung Song

Civil and Environmental Engineering and Construction Faculty Research

Cost overruns, schedule delays, and a shortage of skilled labor are common problems the construction industry is currently experiencing. Modularization and standardization strategies have the potential to resolve the various problems mentioned above and have been applied for various construction applications for a long time. However, the level of modularization remains low, and modular construction projects have not been getting the full benefits. Thus, this review investigated the cutting-edge technologies currently being utilized to develop the modular construction field. For this paper, qualified research papers were identified using predetermined keywords from previous related research papers. Identified literature was then filtered …

Design And Commissioning Of An E-Beam Irradiation Beamline At The Upgraded Injector Test Facility At Jefferson Lab, Xi Li, Helmut Baumgart, Charles Bott, Gianluigi Ciovati, Shaun Gregory, Fay Hannon, Mike Mccaughan, Robert Pearce, Matthew Poelker, Hannes Vennekate, Shaoheng Wang

Electrical & Computer Engineering Faculty Publications

The Upgraded Injector Test Facility (UITF) at Jefferson Lab is a continuous-wave superconducting linear accelerator capable of providing an electron beam with energy up to 10 MeV. A beamline for electron-beam irradiation has been designed, installed and successfully commissioned at this facility, aimed at the degradation study of 1,4-dioxane and per- and polyfluoroalkyl substances (PFAS) in wastewater treatment. A solenoid with a peak axial magnetic field of up to 0.28 T and a set of raster coils were used to obtain a Gaussian beam profile with a transverse standard deviation of ∼15.0 mm at the target location. Monte-Carlo simulations using …

An Improved Polynomial Chaos Expansion Based Response Surface Method And Its Applications On Frame And Spring Engineering Based Structures, Mhd A. Hafez

ETD Archive

In engineering fields, computational models provide a tool that can simulate a real world response and enhance our understanding of physical phenomenas. However, such models are often computationally expensive with multiple sources of uncertainty related to the model’s input/assumptions. For example, the literature indicates that ligament’s material properties and its insertion site locations have a significant effect on the performance of knee joint models, which makes addressing uncertainty related to them a crucial step to make the computational model more representative of reality. However, previous sensitivity studies were limited due to the computational expense of the models. The high computational …

Phased Construction Bridges: Monitoring And Analysis For Traffic-Induced Vibration, Khalid Al-Kady, Christine E. Wittich, Richard L. Wood, George Morcous

Nebraska Department of Transportation: Research Reports

Phased construction is a common technique utilized to allow bridges to remain partially open to traffic throughout the construction process. The segment of the bridge deck that is constructed second cures under the effect of traffic-induced vibration transmitted from the adjacent bridge-deck segment, which is open to traffic. However, subjecting bridge decks to traffic-induced vibration during early-age curing raises concerns about the durability of the decks. The primary goal of this study is to generate a fundamental understanding of the transmission of traffic-induced vibration, the extent of degradation on phased construction bridge decks, and the impact of potential mitigation measures. …

Legal Characterization Of The Challenges Faced By The Construction Industry During Covid-19 And Devaluation Of The Egyptian Pound, Riham Abuzaid

Theses and Dissertations

With all the challenges this past decade has inflicted on the economy on a global scale, Egypt had its share with two major events, starting with the Egyptian pound devaluation against the U.S dollar in 2016 and currently the emergence of the COVID-19 pandemic. These major events instigated the interference of the legal/contractual sectors in the construction market to find solutions that range from agreeable to stringent to protect the assets of their beneficiaries.

Both events are impactful and require extensive analysis to determine and classify each situation. This thesis addresses the implementation of standard internationally acknowledged legislative acts used …

Hands-On Education Module For Modular Construction, 3d Design, And 4d Schedule, Kyle A. Kithas, Jin Ouk Choi

Architecture Faculty Research

A paradigm shift in teaching modular construction in higher education and K-12 is proposed as a means to increase the future adoption of the modular construction technique. To this effect, a new education module is presented to STEM educators. This education module is based on LEGOs and directed towards educators in the architecture, engineering, and construction (AEC) industry. The main objectives of the education module are to increase interest and knowledge of modular construction, acknowledge the benefits of using 3D design with 4D scheduling, and create a simulating hands-on educational opportunity. The education module is designed to allow participants to …

Examining Metal Contents In Primary And Secondhand Aerosols Released By Electronic Cigarettes, Kashala Fabrice Kapiamba, Weixing Hao, Stephen Adom, Wenyan Liu, Yue-Wern Huang, Yang Wang

Chemistry Faculty Research & Creative Works

The usage of electronic cigarettes (ECs) has surged since their invention two decades ago. However, to date, the health effects of EC aerosol exposure are still not well understood because of insufficient data on the chemical composition of EC aerosols and the corresponding evidence of health risks upon exposure. Herein, we quantified the metals in primary and secondhand aerosols generated by three brands of ECs. By combining aerosol filter sampling and inductively coupled plasma mass spectrometry (ICP-MS), we assessed the mass of metals as a function of EC flavoring, nicotine concentration, device power, puff duration, and aging of the devices. …