Civil and Environmental Engineering Commons^™

Identification Of Phosphorous Loading Point Source Facilities To 303(D) Listed Nutrient Impaired Waters Through Watershed Delineation Using Arcgis For Life Cycle Assessment Applications, John Zimmerman

Chemical Engineering Undergraduate Honors Theses

The work done for this project is part of a larger “life cycle assessment (LCA) of novel electrochemical phosphorus recovery technology at the wastewater treatment plant and U.S. watershed scales” (Morrissey 2019). The goal of that LCA is to determine “environmental impacts of implementing electrochemical struvite recovery at the wastewater treatment plant, U.S watershed, and global scales” (Morrissey 2019). This project’s goal is to identify locations deemed more sensitive to eutrophication impacts. The results will be used as part of the life cycle inventory (LCI) accounting for geographically explicit phosphorus flows. The waters identified as impaired were sourced from the …

Application Of Biochar As Beneficial Additive In Concrete, Temirlan Barissov

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Biochar is a high-carbon solid material produced via thermal decomposition of organic biomass in a low-oxygen environment. Characterized with high water retention properties and high alkalinity, biochar is generally used for soil amendment and fertilization purposes. This study is intended to explore the feasibility of using biochar as a beneficial additive of the most used manmade material, concrete. Literature review revealed several studies where biochar was successfully implemented as an additive in concrete. The beneficial influence of biochar on the mechanical characteristics of concrete is based on nucleation and densification effects. However, the internal microstructure, porosity and chemical composition of …

Modeling Watershed Sensitivity To Climate Change In Systems Affected By Discharge Of Mine Tailings, Johnette C. Shockley

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

For more than a century, a large volume of gold-mining tailings was deposited in Whitewood Creek and the Belle Fourche River, tributaries to the Cheyenne River in western South Dakota. Much of it still remains, and field and historical evidence indicates continued remobilization of tailings-containing alluvium in these bedrock-dominated channels. Both long-term, natural fluctuations in climate and anthropogenically driven changes can impact regional precipitation, temperature, hydrologic patterns, and ecosystem functions. Such changes have the potential to affect both the transport and distribution of arsenic-laden sediments and mechanical erosion that can undermine the stability of channel-bed and overbank material.

This study …

Using Differential Shear Strain Measurements To Monitor Crosstie Support Conditions In Railroad Tracks, D. Kody Johnson

Boise State University Theses and Dissertations

This thesis details a comprehensive numerical analysis of load determination, and crosstie support assessment and monitoring using strain gauges to measure differential rail shear strain in ballasted railroad tracks due to applied railcar wheel loads. These differential shear strain measurements can be related to applied wheel loading and crosstie support reactions through the geometric and constitutive properties of a given rail section. The basic theory behind the measurement technique was reviewed and investigated using finite element models of varying complexity. The impact of field conditions such as differential ballast and subgrade support, track stiffness, crosstie spacing, gauge installation location, and …

Ammonia Emission Assessment From Gasoline And Diesel Engines Under Utah Specific Conditions, Motasem Suleiman Abualqumboz

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This study aims to quantify ammonia (NH₃) emission rates from the on-road gasoline and diesel motor vehicles fleet of the Wasatch Front, Utah. For this purpose, a portable Pollution Emissions Monitoring System (PEMS) was used to estimate NH₃ emission rates from a representative fleet of 53 in-use light-duty (LD) gasoline and diesel vehicles over a total of 166 on-road Real Driving Emissions (RDE) tests. The post-catalyst concentrations of NH₃ precursors, nitrogen oxides (NO_x) and carbon monoxide (CO) were also measured. The outcomes of this study showed that a motor vehicle in the Wasatch Front …

Active Transportation Routes Using Canal Corridors: Decision Tools In Creating Successful Canal Trail Projects, Matthew Scott Crump

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The state of Utah has many canal corridors that offer potential opportunities for establishing public trails.In the past, concerns such as public safety and canal companies’ abilities to perform maintenance have inhibited the construction of canal trails. Recently, local governments and canal companies have worked to overcome these challenges which has led to the establishment of some canal trails. The purpose of this study is to provide valuable insights and tools that can be used in developing future canal trails. In order to accomplish this, the study documents various case studies of completed canal trail projects, interviews stakeholders for future …

Classical Venturi Meter Performance Downstream Of The Through Leg Of A Tee Junction, Matthew P. Day

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this research was to analyze the accuracy of a Classical Venturi meter installed downstream of the through leg of a tee junction. A flowmeter that functions inaccurately due to improper installation may cause revenue loss for any company or organization involved in extraction, transportation, production, or purchasing of fluid resources and products. This research used physical data coupled with data produced by numerical models to determine how to correct the Classical Venturi meter’s inaccuracies created by this particular installation.

Results show the capability of measuring the flow rate accurately was greatly affected when most of the flow …

Estimation Of High-Resolution Evapotranspiration In Heterogeneous Environments Using Drone-Based Remote Sensing, Ayman M. M. Nassar

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Evapotranspiration (ET) is a key element of hydrological cycle analysis, irrigation demand, and for better allocation of water resources in the ecosystem. For successful water resources management activities, precise estimate of ET is necessary. Although several attempts have been made to achieve that, variation in temporal and spatial scales constitutes a major challenge, particularly in heterogeneous canopy environments such as vineyards, orchards, and natural areas. The advent of remote sensing information from different platforms, particularly the small unmanned aerial systems (sUAS) technology with lightweight sensors allows users to capture high-resolution data faster than traditional methods, described …

Temperature Effect On The Mechanical Properties Of Steel Fiber Reinforced Ultra-High-Performance Concrete, Jenny Bernadette Gomes

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The contemporary innovation in concrete technology is ultra-high-performance concrete (UHPC). In this work, mechanical properties of UHPC are studied at ambient terrestrial temperature conditions. Specimens are prepared under laboratory environments maintaining the temperature of -25°C, -5°C, 15°C, 35°C, and 55°C. A freeze thaw chamber is utilized to condition the specimens at specified temperatures. Compressive strength, flexural strength, toughness, and modulus of elasticity are determined under varying temperature and steel fiber volume content. The results indicate that both temperature and steel fibers have effect on the mechanical properties of UHPC. The flexural and compressive strength show an opposite trend of strength …

Improvement Opportunities In The Two-Source Energy Balance Model For Et Using Uav Imagery And Point Cloud Information, Mahyar Aboutalebi

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In recent years, satellites and unmanned aerial vehicles (UAVs) provide enormous amounts of spatially-distributed information for monitoring crop conditions by measuring crop’s reflected and emitted radiation at a distance. However, applications of high-resolution UAV imagery and its intermediate products for improving crop water use estimates are not well studied. In other words, the available approaches, methods and algorithms for determining how much water to apply for irrigation using remotely sensed data have been mostly developed at satellite spatial resolutions. High-resolution imageries that have been achieved by small UAVs open new opportunities for revisiting, re-evaluating, and revising available crop water use …

The Impact Of Increasing Flood Frequency On Flood Inundation: A Case Study Of The Little River In Florida, Maj Amanda Catharina Allen

Theses and Dissertations

Floods are considered one of the most devastating natural hazards and are projected to increase in frequency and magnitude in many places around the world, one of them being Florida. Understanding the potential changes of flood hazards due to climate change is of paramount importance for developing effective flood mitigation procedures and resilient infrastructures. In this work, changes in flood inundation characteristics (flood depth and extent) in response to changes in future flood magnitudes are estimated and analyzed for the Little River basin in northwest Florida. HEC-RAS hydraulic model is set up and validated against observations for the flood event …

What Is An Effective Way To Measure Arterial Demand When It Exceeds Capacity?, Mecit Cetin, Hong Yang, Kun Xie, Giridhar Kattepogu, Behrouz Salahshour

Civil & Environmental Engineering Faculty Publications

This project focused on developing and evaluating methods for estimating demand volume for oversaturated corridors. Measuring demand directly with vehicle sensors is not possible when demand is larger than capacity for an extended period, as the queue grows beyond the sensor, and the flow measurements at a given point cannot exceed the capacity of the section. The main objective of the study was to identify and develop methods that could be implemented in practice based on readily available data. To this end, two methods were proposed: an innovative method based on shockwave theory; and the volume delay function adapted from …

New Innovations In Pavement Materials And Engineering: A Review On Pavement Engineering Research 2021, Jtte Editorial Office Chang’An Univeristy, Jiaqi Chen, Hancheng Dan, Yongjie Ding, Yangming Gao, Meng Guo, Zhanping You, Et. Al.

Michigan Tech Publications, Part 1

Sustainable and resilient pavement infrastructure is critical for current economic and environmental challenges. In the past 10 years, the pavement infrastructure strongly supports the rapid development of the global social economy. New theories, new methods, new technologies and new materials related to pavement engineering are emerging. Deterioration of pavement infrastructure is a typical multi-physics problem. Because of actual coupled behaviors of traffic and environmental conditions, predictions of pavement service life become more and more complicated and require a deep knowledge of pavement material analysis. In order to summarize the current and determine the future research of pavement engineering, Journal of …

Evapotranspiration In Mid-South Rice Production, Colby Wade Reavis

Graduate Theses and Dissertations

Rice provides much needed sustenance to a large portion of the global population, particularly in the developing world. With stress placed on food production systems under the reality of climate change and an increasing global population, rice production systems require solutions to a number of issues, including a limited water supply. As producers explore new strategies for conserving local water resources to continue to maintain yields, new irrigation strategies and technologies are being developed and validated for use at commercial production scales. Alternate wetting and drying (AWD) is an irrigation practice that provides water savings through the capture of rainfall …

Hydrogen Underground Storage Efficiency In A Heterogeneous Sandstone Reservoir, Doaa Saleh Mahdi, Emad A. Al-Khdheeawi, Yujie Yuan, Yihuai Zhang, Stefan Iglauer

Research outputs 2014 to 2021

Underground hydrogen storage has been recognized as a key technology for storing enormous amounts of hydrogen, thus aiding in the industrial-scale application of a hydrogen economy. However, underground hydrogen storage is only poorly understood, which leads to high project risk. This research thus examined the effect of caprock availability and hydrogen injection rate on hydrogen recovery factor and hydrogen leakage rate to address some fundamental questions related to underground hydrogen storage. A three dimensional heterogeneous reservoir model was developed, and the impact of caprock and hydrogen injected rate on hydrogen underground storage efficiency were analysed with the model. The results …

Α-Fe2o3/Graphene Oxide Powder And Thin Film Nanocomposites As Peculiar Photocatalysts For Dye Removal From Wastewater, Mahsa Khoshnam, Javad Farahbakhsh, Masoumeh Zargar, Abdul Wahab Mohammad, Abdelbaki Benamor, Wei Lun Ang, Ebrahim Mahmoudi

Research outputs 2014 to 2021

In this study, hematite graphene oxide (αFe2O3-GO) powder nanocomposites and thin-film hematite graphene oxide (αFe2O3-GO) were synthesized for application in the removal of Rhodamine B (RhB) from textile wastewater. αFe2O3-GO nanomaterials were placed onto the FTO substrate to form a thin layer of nanocomposites. Different analysis including XRD, FTIR, Raman spectra, XPS, and FESEM were done to analyze the morphology, structure, and properties of the synthesized composites as well as the chemical interactions of αFe2O3 with GO. The photocatalytic performance of two synthesized composites was compared with different concentrations of αFe2O3-GO. The results showed that powder nanocomposites are more effective …

Microplastics Fouling And Interaction With Polymeric Membranes: A Review, Mitra Golgoli, Mehdi H. Khiadani, Abdellah Shafieian, Tushar K. Sen, Y. Hartanto, M. L. Johns, Masoumeh Zargar

Research outputs 2014 to 2021

The emergence and accumulation of microplastics (MPs) in various aquatic environments have recently raised significant concerns. Wastewater treatment plants (WWTPs) have been identified as one of the major sources of MPs discharge to the environment, implying a substantial need to improve advanced techniques for more efficient removal of MPs. Polymeric membranes have been proven effective in MPs removal. However, fouling is the main drawback of membrane processes and MPs can foul the membranes due to their small size and specific surface properties. Hence, it is important to investigate the impacts of MPs on membrane fouling to develop efficient membrane-based techniques …

Naturally Occurring Van Der Waals Heterostructure Lengenbachite With Strong In-Plane Structural And Optical Anisotropy, Arindam Dasgupta, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Lengenbachite is a naturally occurring layered mineral formed with alternating stacks of two constituent PbS-like and M₂S₃-like two-dimensional (2D) material layers due to the phase segregation process during the formation. Here, we demonstrate to achieve van der Waals (vdW) heterostructures of lengenbachite down to a few layer-pair thickness by mechanical exfoliation of bulk lengenbachite mineral. The incommensurability between the constituent isotropic 2D material layers makes the formed vdW heterostructure exhibit strong in-plane structural anisotropy, which leads to highly anisotropic optical responses in lengenbachite thin flakes, including anisotropic Raman scattering, linear dichroism, and anisotropic third-harmonic generation. Moreover, …

Atlantis: A Benchmark For Semantic Segmentation Of Waterbody Images, Mohammad H. Erfani, Zhenyao Wu, Xinyi Wu, Song Wang, Erfan Goharian

Faculty Publications

Vision-based semantic segmentation of waterbodies and nearby related objects provides important information for managing water resources and handling flooding emergency. However, the lack of large-scale labeled training and testing datasets for water-related categories prevents researchers from studying water-related issues in the computer vision field. To tackle this problem, we present ATLANTIS, a new benchmark for semantic segmentation of waterbodies and related objects. ATLANTIS consists of 5,195 images of waterbodies, as well as high quality pixel-level manual annotations of 56 classes of objects, including 17 classes of man-made objects, 18 classes of natural objects and 21 general classes. We analyze ATLANTIS …

Investigation Of Control Parameters, Strategies, And Transport Modeling For Effective Electrokinetic Nanoparticle Treatment Of Cementitious Materials, Huayuan Zhong

Doctoral Dissertations

Various deleterious chemical species (including sulfates, chlorides, and others) contaminate concrete structures which are inherently porous and thus suffer from compromised durability. Several technologies have been developed for repairing concrete or enhancing the service life. Nevertheless, their efficiency, practicability, and cost can vary widely. Compared with chemical grout, fiber wrap, and traditional repair technology, electrokinetic nanoparticle treatment (EN) has been found to provide remarkable benefits for strength restoration and mitigation of durability problems via porosity reduction. Nanoparticle instability and over dosage issues can arise and lead to problems during treatments. In many cases, these treatment processes have been accompanied by …

Classification Des Sols Et Sélection Des Systèmes D’Étançonnement Pour L’Excavation Des Tranchées, Bertrand Galy, Denis Lebœuf, Omar Chaallal, André Lan

Rapports de recherche scientifique

Les travaux de fouilles en tranchée exposent les travailleurs à de nombreux risques. L’éboulement est le risque le plus grave et le plus fréquent présent pendant ces travaux, mais hélas, il est très souvent sous-estimé, alors qu’un éboulement mineur de moins d’un mètre cube de terre peut blesser mortellement un travailleur. Une analyse de 50 rapports d’accidents graves et mortels de la Commission des normes, de l’équité, de la santé et de la sécurité du travail (CNESST), survenus entre mai 1974 et juin 2017 lors de travaux d’excavation et de fouilles en tranchées, montre qu’il y a eu 48 décès …

Integrating Construction 4.0 Technologies: A Four-Layer Implementation Plan, Mahmoud El Jazzar, Christian Schranz, Harald Urban, Hala Nassereddine

Civil Engineering Faculty Publications

This research explores the current state of Construction 4.0 and discusses a four-layer implementation of Construction 4.0 in the industry. The research methodology consists of an extensive literature review to gain insights about Construction 4.0 and frame the four-layer implementation plan. A case study is also presented to showcase the proposed implementation plan. Nine Construction 4.0 technologies were discussed, their integration throughout the project lifecycle was presented in a roadmap, their integration and connectivity with one another were outlined in an interaction roadmap, and the requirements necessary for achieving the 4.0 transformation were articulated. However, the proposed implementation plan is …

Gender And Equality In Transport. Proceedings Of The 2021 Travel Demand Management Symposium, Maria Chiara Leva, Augustus Ababio-Donkor, Ajeni Thimnu, Wafaa Saleh

Books/Book Chapters/ Proceedings

Proceedings of the 10^TH INTERNATIONAL TRAVEL DEMAND MANAGEMENT (TDM) SYMPOSIUM IN CONJUNCTION WITH TINNGO AND DIAMOND FINAL CONFERENCE titled: Gender and Equality in Transport

Cyber Physical Systems For Non-Contact Infrastructure Monitoring, Roya Nasimi

Civil Engineering ETDs

In recent decades, the decay of infrastructure has become a relevant challenge of both developed and under developing countries. Prioritization of maintenance and repairs of transportation infrastructure is a new worldwide priority since it is important to quantify the rate of decay of assets to increase both safety and cost-efficient operations. Infrastructure owners need frequent inspections on their assets to predict and to avoid unsafe conditions prone to cause disasters. Frequent infrastructure inspections call for cost-effective methods. Traditional measurement methods require human access to the infrastructure, are subjective, expensive, and unsafe. Therefore, infrastructure managers are interested in exploring new non-contact …

Cognizant Composites: Seamless Integration Of Circuitry And Sensors Into Structural Composites, Reuben Fresquez

Computer Science ETDs

This thesis describes a set of novel techniques for embedding sensors, circuitry, and electronics into structural composites. I leverage recent developments in human computer interaction to create sensors and circuitry that are seamlessly incorporated into structural composites. I fabricate bend and compression sensors, along with circuitry, from textiles, which enables me to add electronic capabilities without impacting the composite’s structural integrity. I describe the construction of these “cognizant composites” and demonstrate their functionality. I also explore techniques for embedding standard electronic components, including microcontrollers, into structural composites. Potential applications of this technology include buildings that can warn occupants if load-bearing …

Measurement Of Resilience Performance For Infrastructure Construction Project Delivery, Fei Han

Civil Engineering ETDs

In the past decade, infrastructure resilience in the U.S. has become critical due to increasing disruptions to the built environment and the resultant consequences on economic, social, and environmental goals. This attention to resilience research is drawn to investigating the ability of existing structures and facilities to resist and recover from natural and human-caused hazards. From a broader view, resilience also applies to processes, such as infrastructure project delivery processes. During these processes, a project often suffers inevitable threats and disruptions, which can significantly delay or derail the project if the process is not resilient.

This research aimed to conceptualize …

Civil Engineering And Construction News, Georgia Southern University

Civil Engineering & Construction: News & Publications (2011-2022)

• Dr. Marcel Maghiar Earning the Highest Level of Certification in Infrared (IR) Imaging and Analysis

Application Of Using Fault Detection Techniques In Different Components In Power Systems, Mohamed Yahia Abd-Alkader, Ahmed M. Ebid Dr., Ibrahim Mahdi, Ibrahim Abdelrashed Nosseir

Future Engineering Journal

Throughout the years, Fault detection has been one of the most frequently discussed topics in the scientific community at present. Consequently, it has been extensively studied and focused on in recent years. This scientific paper presents some of this research, what they have reached, and the methods used for their studies. The literature review provides that these problems are not covered yet. It needs more works to develop fault detection techniques for better performance.

The Impact Of Stakeholder Management On Reducing Time And Cost In The Implementation Stages Of Mega Projects, El-Haytham A. Ali, Ibrahim Mahdi, Hesham A. Mahdi, Kamal A. Assaf

Future Engineering Journal

Stakeholder management continues to be the most important part affecting project duration and cost. The time and cost of the most important problems of megaprojects. In this study, interviews were conducted to assess the impact of stakeholder management on project delays and cost overruns. Interviews were conducted with project managers and engineers, in addition to a simple questionnaire to know the impact of stakeholder management in megaprojects. The interviews showed the importance of stakeholder management in the different project stages, which start from site preparation, licenses, and paperwork, through the various implementation stages to the project delivery stage. It has …

Gap Study For The Impact Of Braced Deep Excavation On The Behavior Of Excavation Bed, Abdelrahman E. Aboelela, Ahmed M. Ebid, Ayman L. Fayed

Future Engineering Journal

Two geotechnical topics were investigated in this research; shored deep excavation and modulus of subgrade reaction. Both topics were extensively studied by many earlier researchers. The aim of this study is to answer the following question, "Is deep excavation effects on excavation bed behavior of sufficiently investigated? Or there still un-studied gaps should be fulfilled?”. Litterateurs were collected, reviewed and classified for both topics especially in the interaction zone between the two topics, and it is concluded that deep excavation effect on the modulus of subgrade reaction values and distribution at excavation bed level is not sufficiently addressed especially the …