Civil and Environmental Engineering Commons^™

A Rupture Limit Equation For Pre-Loaded Composite Plates, William P. Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Fiber-reinforced polymer composites offer inherent advantages over traditional metallic materials in a number of different ways; however, these materials are also highly susceptible to impact damage. In this paper, we explore the response of FRP (fiber reinforced polymer) composites under impact conditions that could result in their rupture or catastrophic failure. The work performed was aimed at developing a general, data-driven equation for initially-stressed, flat, composite plates that would differentiate between impact conditions that would result in only a hole or crack and those which would cause catastrophic plate failure or rupture. If this equation were to be subsequently shown …

Failure Of The Alexander Dam Embankment And Reconstruction Using Drainage Mitigation On Kauai, Hawaii, 1930-1932, Kerry D. Cato, J. David Rogers

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Alexander Dam is a hydraulic fill earth dam and the second-highest embankment dam in Hawaii, having been built in 1929-1932 on the south side of the Hawaiian island of Kauai to provide irrigation for McBryde Sugar Company Ltd. It was constructed across Wahiawa Stream mauka (Hawaiian for "stream that comes from the mountains," literally "toward the mountains"), upstream of Kalaheo, to store 800 million gallons (5 million m3) of water to irrigate sugarcane fields. The embankment dam was intended to have a maximum height of 125 ft (38 m), a crest length of 620 ft (189 m), and a maximum …

Partitioning Of Pcbs From Air To Clothing Materials In A Danish Apartment, Glenn Morrison, H. V. Andersen, L. Gunnarsen, D. Varol, E. Uhde, B. Kolarik

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Polychlorinated biphenyl (PCB) contamination of buildings continues to pose an exposure threat, even decades after their application in the form of calks and other building materials. In this research, we investigate the ability of clothing to sorb PCBs from contaminated air and thereby influence exposure. The equilibrium concentration of PCB-28 and PCB-52 was quantified for nine used clothing fabrics exposed for 56 days to air in a Danish apartment contaminated with PCBs. Fabric materials included pure materials such as cotton and polyester, or blends of polyester, cotton, viscose/rayon, and/or elastane. Air concentrations were fairly stable over the experimental period, with …

Inspire Newsletter Fall 2018, Missouri University Of Science And Technology. Inspire - University Transportation Center

INSPIRE Newsletters

No abstract provided.

Exploring High-Resolution Data Obtained From Asc/3 Controller Of Intersection Se Division St & Se 122nd Ave, Portland, Oregon, Naowar Al-Abbas

Civil and Environmental Engineering Master's Project Reports

High-resolution data obtained from ASC/3 controllers can be used to create a variety of performance measures, helping engineers and professionals in monitoring intersection performance, identifying issues, and making proper improvements. These measures concern the intersection quality of the progression, capacity, and non-vehicular operations (e.g. pedestrian crossings). In this report, we explored high-resolution data obtained from the intersection of SE Division Street and 122nd Avenue. This intersection had some safety concerns as it is considered one of most dangerous intersections in Portland, Oregon. Thus, the first variable we examined from the data was pedestrian wait time when a cross request is …

Color Removal And Treatment Of Dye And Sugar Waste Water Using Low Cost Adsorbents, Saisantosh Vamshi Harsha Madiraju

ETD Archive

This study was undertaken to determine the treatment of wastewater from dye and sugar industry for removal of color. This specific treatment consists of adsorption using low cost adsorbents and micro filtration using whatman-41 micro filters. Considerations of this treatment process is to take the samples using batch adsorption and avoid coagulation with further dilution. Numerous runs were made with the ideal waste samples prepared in the laboratory. As a first step in the study different dyes were considered using different concentrations of sugar wastewater. Samples were treated with three different low-cost adsorbents. These treated samples using low cost adsorbents …

Civil Engineering Surrounds You, Claire Anderer-Armstrong

Undergraduate Research Posters 2018

Academic engineering departments are regularly asked to conduct tours of their laboratories to prospective CSU students. For the Civil & Environmental Engineering department, the tours typically take place in the Driving Simulation laboratory, which houses an RS-600 driving simulator. The purpose of this project was to develop a driving scenario that highlights various aspects of civil engineering. The programmed scenario will be used to conduct future tours.

Cee 433: Water Technology & Policy Syllabus, University Of Illinois At Urbana-Champaign, Ashlynn Stillwell

All ECSTATIC Materials

This document is the syllabus for CEE 433: Water Technology & Policy, by instructor Ashlynn S. Stillwell at the University of Illinois at Urbana-Champaign. The course is an elective class, open to upper-level undergraduate and graduate students.

Jeopardy - Water Price, Ecnomic Cost, Economic Value, Rabi Gyawali, Ali Mirchi, David Watkins, Jr.

All ECSTATIC Materials

It's Jeopardy! Test your knowledge of water prices, water cost, it's economic value, full value, and more. Information developed from a companion lecture and two readings:

1. Brett Walton. (2010). The Price of Water: A Comparison of Water Rates, Usage in 30 U.S. Cities. April 26. Circle of Blue WaterNews. Available at: https://www.circleofblue.org/2010/world/the-price-of-water-a-comparison-of-water-rates-usage-in-30-u-s-cities/.
2. Peter Rogers, Radhika de Silva, Ramesh Bhatia. (2002) Water is an economic good: How to use prices to promote equity, efficiency, and sustainability, Water Policy, Volume 4, Issue 1, 2002, Pages 1-17, https://doi.org/10.1016/S1366-7017(02)00004-1.

How many Jeopardy points can you earn?

Milwaukee Wet Weather Flow Management System Planning, David Watkins

All ECSTATIC Materials

Many older cities across the United States rely on combined sewers to convey both stormwater runoff and sanitary sewage. Combined sewer overflows (CSOs), containing untreated sewage, occur during extreme wet weather, when the capacity of these combined sewer systems is exceeded. Across the U.S., CSOs pose a serious threat to water quality in thousands of lake, river, and coastal ecosystems. In addition to harming the natural environment, they may be a threat to human health and have adverse economic consequences (e.g., beach closings, reduced aesthetics, tourism impacts).

In this assignment, students role-play engineering consultants tasked with developing a cost-effective plan …

Plastic Hinge Relocation In Reinforced Concrete Beams Using Cu-Al-Mn Sma Bars, S. Pareek, Maged Youssef, Mohamed E. Meshaly, Y. Araki

Civil and Environmental Engineering Publications

costs. The use of Ni-Ti superelastic shape memory alloy (SMA) constitutes a considerable portion of this research. Cu-Al-Mn superelastic SMA has been recently developed to eliminate the high cost of Ni-Ti SMA, as well as, to have better machining characteristics. This paper explores the use of Cu-Al-Mn SMA bars to relocate the plastic hinge of concrete beams through an experimental–numerical study. The cyclic performance of four beams was examined. The first was reinforced with steel bars and the remaining three were reinforced with combination of SMA and steel bars. The location of the SMA bars was different for each of …

Assessment Of The Flexural Behavior Of Reinforced Concrete Beams Strengthened With Concrete Jackets, M. Monir A. Alhadid, Maged Youssef

Civil and Environmental Engineering Publications

Analysis of continuous jacketed Reinforced Concrete (RC) beams requires accounting for the nonlinear behavior of the interface and the materials as well as redistribution of moments. This kind of analysis is complex and require an advanced level of knowledge and experience to perform. Engineers need simplified yet robust tools to practically predict the actual behavior of jacketed RC beams. In the current practice, slip is neglected in the analysis and monolithic behavior is assumed for the jacketed section, which result in higher estimates of stiffness and/or capacity. This paper provides a simplified method to analyze continuous jacketed RC beams taking …

Seismic Fragility Assessment Of Superelastic Shape Memory Alloy Reinforced Concrete Shear Walls, Emad A. Abraik, Maged A. Youssef

Civil and Environmental Engineering Publications

Mitigation of seismic damage can be achieved through self-centering techniques. One of the potential techniques involves the use of Superelastic Shape Memory Alloy (SE-SMA) bars in Reinforced Concrete (RC) structures. This study explores the use of such bars in the plastic-hinge regions of RC walls. The seismic performance and vulnerability of SE‑SMA RC walls of ten- and twenty-story buildings are analytically assessed using fragility curves. The maximum inter-story drift, residual drift, and fragility are evaluated using multi strip analysis. The results clearly demonstrate the superior seismic performance of SE-SMA RC walls as compared to steel RC walls.

Seismic Performance Of Modular Steel Frames Equipped With Shape Memory Alloy Braces, Papia Sultana, Maged A. Youssef

Civil and Environmental Engineering Publications

The demand for modular steel buildings (MSBs) has increased because of the improved quality, fast on-site installation, and lower cost of construction. Steel braced frames are usually utilized to form the lateral load resisting system of MSBs. During earthquakes, the seismic energy is dissipated through yielding of the components of the braced frames, which results in residual drifts. Excessive residual drifts complicate the repair of damaged structures or render them irreparable. Researchers have investigated the use of superelastic shape memory alloys (SMAs) in steel structures to reduce the seismic residual deformations. This study explores the potential of using SMA braces …

Addressing Clay Mineralogy Effects On Performance Of Chemically Stabilized Expansive Soils Subjected To Seasonal Wetting And Drying, Bhaskar C.S. Chittoori, Anand J. Puppala, Aravind Pedarla

Civil Engineering Faculty Publications and Presentations

Premature failures in chemically stabilized expansive soils cause millions of dollars in maintenance and repair costs. One of the reasons for these failures is the inability of existing stabilization design guidelines to consider the complex interactions between clay minerals and the stabilizers. It is vital to understand these complex interactions, as they are responsible for the strength improvement and swell/shrink reduction in these soils, in turn affecting the overall health of the infrastructure. Hence, this research study examined the longevity of chemically stabilized expansive soils subjected to wetting/drying conditions with a major focus on clay mineralogy. Eight different natural soils …

Unified Approach To Sustainability, Resiliency And Risk Assessments, Thomas Robbins, Bhaskar Chittoori, Amit Gajurel, Robert Hamilton

Civil Engineering Faculty Publications and Presentations

Generally, researchers consider sustainability and resiliency aspects of infrastructure projects independently, without considering the relationship that exists between them. Unified approaches that combine sustainability, resiliency, and analyze risk are very minimal. This paper proposes a unified approach to assessing sustainability, resiliency, and risk for infrastructure via evaluating the performance of a tailings dam under various earthquake magnitudes. A tailings dam is typically in operation for many years, which means they may have a direct impact on the local environment, society, and economy. Due to the extended life of the dam, the probability of a major event occurring that could negatively …

Energising Dairy Decisions, John Upton, Philip Shine, Michael Breen, Michael D. Murphy

Publications

A new tool developed by Teagasc researchers easily and quickly allows dairy farmers to see their energy usage and evaluate how renewable sources could decrease energy costs.

Color Removal From Combined Dye And Fruit Nectar Wastewater Using Adsorption And Microfiltration, Oluwatobiloba A. Akinwande

ETD Archive

Pollution of the waterways is a great challenge of the 21st century. Textile effluents contain compounds which have the capacity to cause more harm when ingested. There are many dye removal technologies like coagulation, photo oxidation which help to remove color from dye wastewater. The use of adsorption to remove color from dye wastewater has been used for many centuries. Activated carbon can efficiently remove color from dye wastewater but it is very expensive and so different researches have been conducted to get the adsorption capacity of different forms of adsorbents. These adsorbents can be gotten from agricultural waste, biomass, …

Factors Affecting Minimum Dissolved Oxygen Concentration In Streams, Chistopher Robert Huhnke

ETD Archive

Modeling water quality has been shown to be a useful tool in strategizing water quality management. Dissolved oxygen (DO) has one of the largest impacts on water quality compared to other parameters. The purpose of the dissertation research is to generate a regression equation model, using the US EPA QUAL2K model as the base, to determine different factors affecting minimum dissolved oxygen concentrations in streams, to determine the critical distance for the minimum dissolved oxygen concentration, and the magnitude of impact of each parameter. Based on regression analysis, the factors affecting minimum DO in river water are effluent biochemical oxygen …

Adsorption And Microfiltration Processes To Treat Dye And Coffee Wastewater., Abhiram Siva Prasad Pamula

ETD Archive

Wastewater from coffee processing industry creates high biological and chemical oxygen demand in the surface water. In addition to coffee wastewater from coffee industry, dyes from textile industry enter surface water affecting water quality in terms of transmissivity of light. Adsorption is an economical wastewater treatment process to remove color from dye and coffee wastewater. In the current thesis, adsorption using low-cost adsorbents like peanut hull and onion peel are used to treat combined dye and coffee wastewater. Three representative dyes including acid black 48, disperse yellow 3, crystal violet certified with processed coffee is used in preparing batch adsorption …

Designing Novel Grooved Pallets For Industrial Application, Mirza Mohammed Abdullah Baig

ETD Archive

The purpose of this study was to model an improved pallet design which could overcome the drawbacks and failures of the pallets available in the market today. The new modeled pallets were designed to improve the capacity of the individual pallets and thereby increase the efficiency of the material handling process. The new modeled pallets were also designed with the aim to replace the racking system used for storage in the warehouse industry. The study was performed using two finite element analysis software, SOLIDWORKS and ANSYS, as analysis tools to study the behavior of the design under various real world …

Analysis Of Micromixers To Minimize Scaling Effects On Reverse Osmosis Membranes, Jeremy Walker

Wayne State University Dissertations

ABSTRACT

ANALYSIS OF MICROMIXERS TO MINIMIZE SCALING EFFECTS ON REVERSE OSMOSIS MEMBRANES

by

Jeremy Walker

December 2018

Advisor: Dr. Shawn McElmurry

Major: Civil Engineering

Degree: Doctor of Philosophy

Structural elements, typically mesh spacers, are required between membrane leaves in spiral

wound elements to ensure flow through reverse osmosis (RO) modules. The standard diamond-shaped

mesh spacer results in non-ideal hydrodynamics that can lead to fouling, which ultimately reduces the

flux of water through the membrane and the operational life of the unit. Additionally, traditional mesh

feed spacers do not allow for reverse flow cleaning due to obstructed flow paths and, once …

The Long Term Effect Of Agricultural, Vadose Zone And Climatic Factors On Nitrate Contamination In Nebraska’S Groundwater System, Pongpun Juntakut, Daniel D. Snow, Erin M.K. Haacker, Chittaranjan Ray

Nebraska Water Center: Faculty Publications

A four-decade dataset (1974–2013) of 107,823 nitrate samples in 25,993 wells from western and eastern parts of Nebraska was used to assess long-term trends of groundwater nitrate concentration and decadal changes in the extent of groundwater nitrate-contaminated areas (NO₃-N≥10 mg N/L) over the entire state. Spatial statistics and regressions were used to investigate the relationships between groundwater nitrate concentrations and several potential natural and anthropogenic factors, including soil drainage capacities, vadose zone characteristics, crop production areas, and irrigation systems. The results of this study show that there is no statistically significant trend in groundwater nitrate concentrations …

Rapid And Damage-Free Outgassing Of Implanted Helium From Amorphous Silicon Oxycarbide, Qing Su, Hepeng Ding, Lloyd Price, Lin Shao, Jonathan A. Hinks, Graeme Greaves, Stephen E. Donnelly, Michael J. Demkowicz, Michael Nastasi

Nebraska Center for Energy Sciences Research: Publications

Damage caused by implanted helium (He) is a major concern for material performance in future nuclear reactors. We use a combination of experiments and modeling to demonstrate that amorphous silicon oxycarbide (SiOC) is immune to He-induced damage. By contrast with other solids, where implanted He becomes immobilized in nanometer-scale precipitates, He in SiOC remains in solution and outgasses from the material via atomic-scale diffusion without damaging its free surfaces. Furthermore, the behavior of He in SiOC is not sensitive to the exact concentration of carbon and hydrogen in this material, indicating that the composition of SiOC may be tuned to …

John Frank Stevens: Panama Canal Mastermind And Pioneering Railroad Pathfinder, J. David Rogers, Lawrence M. Magura

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

John Frank Stevens began his civil engineering career as a rodman on a survey crew in Maine in 1872. He soon moved to Minneapolis, where he apprenticed himself, eventually becoming Assistant City Engineer. In 1876 he began working for railroads in the western United States. In 1882 Stevens began working for a contractor laying tracks for the Canadian Pacific Railroad in Saskatchewan. The next spring he became assistant engineer of location for the Canadian Pacific, completing the first transcontinental line linking Montreal with Vancouver in 1888. In 1889 James Jerome Hill retained Stevens as chief pathfinder for the new Great …

Mech 237-101-103: Strength Of Materials, Elizabeth Castro

Civil and Environmental Engineering Syllabi

No abstract provided.

The Social, Educational, And Market Scenario For Nzeb In Europe, Evangelia Topriska, Maria Kolokotroni, Daniela Melandri, Simon Mcguinness, Andrei Ceclan, Georgios C. Christoforidis, Fazio Vittoria, Maria Hadjpannayi, Patrick Hendrick, Marija Kacarska, López Lopez, Kaj Leonhart Petersen, Jutta Steinbrecher

Articles

Nearly Zero Energy Buildings (nZEB) are a significant part of the energy efficiency strategy of the European Union. As buildings represent approximately 40% of the final energy use in Europe, the reduction of their energy demand is key for a sustainable future. This paper takes a qualitative approach and presents data about professional and market barriers, as well as the educational market in relation to the implementation of nZEB policies for new and retrofit buildings in 11 European countries. Different levels of policy enactments and market penetration are reported and are generally found to be more advanced in western and …

Safety Assessment And Risk Estimation For Unmanned Aerial Vehicles Operating In National Airspace System, Xuejun Zhang, Yang Liu, Yu Zhang, Xiangmin Guan, Daniel Delahaye, Li Tang

Civil and Environmental Engineering Faculty Publications

This paper proposes an effective approach for modelling and assessing the risks associated with unmanned aerial vehicles (UAVs) integrated into national airspace system (NAS). Two critical hazards with UAV operations are considered and analyzed, which are ground impacts and midair collisions. Threats to fatalities that result from the two hazards are the focus in the proposed method. In order to realize ground impact assessment, a multifactor risk model is designed by calculating system reliability required to meet a target level of safety for different UAV categories. Both fixed-wing and rotary-wing UAVs are taken into account under a real scenario that …

Oil Droplet Transport Under Non-Breaking Waves: An Eulerian Rans Approach Combined With A Lagrangian Particle Dispersion Model, Roozbeh Golshan, Michel C. Boufadel, Victor A. Rodriguez, Xiaolong Geng, Feng Gao, Thomas King, Brian Robinson, Andres E. Tejada-Martinez

Civil and Environmental Engineering Faculty Publications

Oil droplet transport under a non-breaking deep water wave field is investigated herein using Computational Fluid dynamics (CFD). The Reynolds-averaged Navier–Stokes (RANS) equations were solved to simulate regular waves in the absence of wind stress, and the resulting water velocities agreed with Stokes theory for waves. The RANS velocity field was then used to predict the transport of buoyant particles representing oil droplets under the effect of non-locally generated turbulence. The RANS eddy viscosity exhibited an increase with depth until reaching a maximum at approximately a wave height below the mean water level. This was followed by a gradual decrease …

A Systems Analysis Of Factors Influencing Household Solar Pv Adoption In Santiago, Chile, Jeffrey Walters, Jessica Kaminsky, Lawrence Gottschamer

Civil and Environmental Engineering Faculty Publications

Societal uptake of household solar photovoltaic (PV) technology is the result of a complex and interdependent array of technical, social, political and economic factors. This novel study employs a systems lens to examine both technical and non-technical barriers to renewables, with a focus on interactions that are empirically influential on PV uptake. Using local solar expert stakeholder input into a participatory systems approach, this study provides a structural analysis of factors influencing household solar adoption. The approach is applied and assessed for household solar PV systems in Santiago, Chile, to gain insight into the interconnected factors driving technology adoption. Barriers …