Civil and Environmental Engineering Commons^™

Fluid Isolator, Purdue Ect Team

ECT Fact Sheets Archive

The reliability of concrete infrastructure is vital to ensuring daily life, as well as commerce, can progress without interruption. From the pavement of interstate highways to the driveways and sidewalks in a local neighborhood, concrete is expensive to install and often even more expensive, and intrusive, when it needs to be replaced. Unfortunately, to maintain functionality in winter climates concrete is heavily exposed to deicing salts. This not only affects the roads, driveways, and sidewalks where salt is applied directly, but many other areas such as parking and residential garages where vehicles (and people) will track salt along with water …

Netpoint®, Purdue Ect Team

ECT Fact Sheets Archive

The vast majority of construction scheduling software uses a combination of spreadsheets and Gantt charts for developing and depicting Critical Path Method (CPM) schedules. While this paradigm works for the expert scheduler, it is not conducive to collaboration, and it is prohibitively difficult for non-scheduling experts to understand.

NetPoint® provides a dynamic, visual interface conducive to touch and gestural input. Activities are drawn directly on a time-scale and may be placed on the same row or arranged automatically using codes or the WBS. Such control of the presentation makes it easier to communicate the plan to any type of audience. …

College Of Engineering Senior Design Competition Spring 2017, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Length Of Need And Minimum System Length For F-Shape Portable Concrete Barrier, Robert W. Bielenberg, Dylan T. Meyer, Ronald K. Faller, John D. Reid

Nebraska Department of Transportation: Research Reports

Portable concrete barrier (PCB) systems are often used to redirect errant vehicles through a combination of inertial resistance, lateral friction loads, and tensile loads developed from the mass and friction of the barrier segments. State departments of transportation (DOTs) and other end users may wish to utilize minimal length PCB installations to shield a hazard or work zone or limit the number of barriers required on the upstream and downstream ends to reduce overall system length. However, concerns with the performance of shorter PCB installations include increased lateral deflections and working widths and barrier pocketing. Additionally, no impact testing has …

Method For The Production Of Substituted Polysaccharides Via Reactive Extrusion, Milford Hanna, Pratik Bhandari

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A reactive extrusion process for the production of substituted polysaccharides, in particular, cellulose acetate, starch acetate, carboxymethyl cellulose, and carboxymethyl starch.

The present application claims the benefit of PCT/ US20111059785 filed on Nov. 8, 2011, which claimed the benefit of U.S. provisional application 611411,521, filed on Nov. 9, 2010, U.S. provisional application 611411,992, filed on Nov. 10, 2010, and U.S. provisional application 611472, 748, filed on Apr. 7, 2011, each of which is which is incorporated herein by reference in its entirety.

The production of substituted polysaccharides such as starch and cellulose acetates and carboxymethylated starches and celluloses have typically …

Testing And Evaluation Of Mash Tl-3 Transition Between Guardrail And Portable Concrete Barriers, Robert W. Bielenberg, Jessica L. Lingenfelter, Justine E. Kohtz, Ronald K. Faller, John D. Reid

Nebraska Department of Transportation: Research Reports

Three full-scale vehicle crash tests were conducted according to the Manual for Assessing Safety Hardware (MASH) Test Level 3 (TL-3) safety performance criteria on a transition between the Midwest Guardrail System (MGS) and a portable concrete barrier (PCB) system. The transition system utilized for test nos. MGSPCB-1 through MGSPCB-3 consisted of a standard MGS that overlapped a series of F- shape PCB segments that approached the MGS at a 15H:1V flare. In the overlapped portion of the barrier systems, uniquely-designed blockout holders and a specialized W-beam end shoe mounting bracket were used to connect the systems.

In test no. MGSPCB-1, …

Vulnerability Of Coastal Connecticut To Sea Level Rise: Land Inundation And Impacts To Residential Property, Rebecca Andreucci, Can B. Aktas

Civil Engineering Faculty Publications

Vulnerability indices at the global or national scales require considerable data aggregation where local economic and social impacts remain unnoticed. The goal of this study was to analyze the extent of inundated land from sea level rise and its economic impacts to residential property in coastal communities. Geographic data were integrated with economic and social data at parcel level resolution through GIS. Cumulative land inundation in seven coastal municipalities was calculated as 15 and 25 km², while direct economic costs to residential property was estimated to be $1.3 billion and $2.2 billion for 1 and 2 m sea …

Gis Internship At Tighe And Bond, Yuanting Qu M.S.

Sustainability and Social Justice

I started working as GIS Intern at Tighe and Bond Worcester Office on May 11, 2016. I was given a multitude of civil engineering related projects to edit, verify, do analysis and process data. I was able to apply my computer programming skills to help the GIS team develop a useful script tool set that will improve efficiency work. This internship provided me insight into how GIS operate as a part of engineering project on a day-to-day basis. Working background, my responsibilities and what I have learned from this internship is discussed in this report.

Peer-To-Peer Carsharing: Short-Term Effects On Travel Behavior In Portland, Or, Jennifer Dill, Nathan Mcneil, Steven Howland

TREC Final Reports

Peer-to-peer (P2P) carsharing is a relatively new concept in the U.S. Enabled by recent internet and mobile technology development, P2P carsharing generally involves a facilitating company connecting private vehicle owners to people who are interested in renting a vehicle. P2P carsharing has many things in common with business-to-consumer (B2C) carsharing services. Consumers join the service to rent vehicles on a short-term basis from locations dispersed throughout a certain area. Both services may allow households to reduce their private car ownership. However, P2P carsharing differs substantially from other models in that there are two distinct sets of consumers: those who rent …

Narratives Of Marginalized Cyclists: Understanding Obstacles To Utilitarian Cycling Among Women And Minorities In Portland, Or, Amy Lubitow

TREC Final Reports

Research has demonstrated that everyday or utilitarian forms of cycling are most likely to generate positive population-level health impacts (Garrard et al., 2012), yet significant deterrents to routine cycling remain, particularly for women and minorities. The primary aim of this project was to conduct a qualitative interview study that generated rich, narrative data regarding obstacles to routine or utilitarian cycling for women and minorities who already see biking as a viable form of transit, but who make relatively few bike trips. A secondary aim of the project was to develop a set of specific interventions that have the potential to …

Do Single-Use Medical Devices Containing Biopolymers Reduce The Environmental Impacts Of Surgical Procedures Compared With Their Plastic Equivalents?, Scott R. Unger, Troy A. Hottle, Shakira R. Hobbs, Cassandra L. Thiel, Nicole Campion, Melissa M. Bilec, Amy E. Landis

Publications

Background: While petroleum-based plastics are extensively used in health care, recent developments in biopolymer manufacturing have created new opportunities for increased integration of biopolymers into medical products, devices and services. This study compared the environmental impacts of single-use disposable devices with increased biopolymer content versus typically manufactured devices in hysterectomy.

Methods: A comparative life cycle assessment of single-use disposable medical products containing plastic(s) versus the same single-use medical devices with biopolymers substituted for plastic(s) at Magee-Women’s Hospital (Magee) in Pittsburgh, PA and the products used in four types of hysterectomies that contained plastics potentially suitable for biopolymer substitution. Magee is …

Understanding N-Nitrosodimethylamine Formation In Water: Chloramine Chemistry, Kinetics, And A Proposed Reaction Pathway, Huong Thu Pham

Graduate Theses and Dissertations

The formation of N-nitrosodimethylamine (NDMA) in drinking water systems is a concern because of its potential carcinogenicity and occurrence at toxicologically relevant levels. The postulated mechanism for NDMA formation involves a substitution between dichloramine and amine-based precursors to form an unsymmetrical dimethylhydrazine (UDMH), which is then oxidized by ground-state molecular oxygen to form NDMA. However, this latter reaction is spin forbidden, thus likely occurs at a slow rate. It is hypothesized that the reaction between monochloramine and hydroxylamine (a nitrification product) may form an intermediate, which is involved in the NDMA formation pathway. This intermediate may also be generated from …

Exploring Compaction Effects On Cold In-Place Recycling Mixtures Using Emulsified Asphalt, Erica Ann Yeung

Graduate Theses and Dissertations

Cold in-place recycling (CIR) is a process that takes three to four inches of existing pavement surface and reuses 100% of it by milling and crushing it, adding asphalt emulsions and/or additives to it, before placing and re-compacting it. There is currently very little research regarding the interaction between the crushed aggregate and asphalt emulsion during the CIR process. In this study, the interactions between the combinations of crushed aggregates and asphalt emulsions were investigated along with select compaction metrics and a raveling performance test. The three types of aggregates included coated limestone, recycled asphalt pavement (RAP), and coated syenite. …

Feasibility Of Additive Manufactured Materials For Use In Geotechnical Laboratory Testing Applications, Matthew P. Watters

Graduate Theses and Dissertations

The factors affecting the positive volumetric strain, or dilatancy, typically observed in response to shearing of a dense granular material have long been investigated; however, there still lacks a direct relationship between particle shapes and the resulting dilatant response. The typical Mohr-Coulomb strength parameter associated with granular material is known as the effective friction angle (φ’). For a dense granular assemblage, the peak friction angle has been described as being comprised of a dilatant friction angle (φ’d) component and a critical state friction angle (φ’cv) component. While the topic of dilatancy and factors (both inherent and extrinsic) affecting its behavior …

Total N-Nitrosamine Precursor Adsorption With Carbon Nanotubes: Elucidating Controlling Physiochemical Properties And Developing A Size-Resolved Precursor Surrogate, Erin Needham

Graduate Theses and Dissertations

As drinking water sources become increasingly impaired with nutrients and wastewater treatment plant (WWTP) effluent, formation of disinfection byproducts (DBPs) – such as trihalomethanes (THMs), dihaloacetonitriles (DHANs), and N-nitrosamines – during water treatment may also increase. N-nitrosamines may comprise the bulk of the chronic toxicity in treated drinking waters despite forming at low ng/L levels. This research seeks to elucidate physicochemical properties of carbon nanotubes (CNTs) for removal of DBP precursors, with an emphasis on total N-nitrosamines (TONO).

Batch experiments with CNTs were completed to assess adsorption of THM, DHAN, and TONO precursors; physiochemical properties of CNTs were quantified through …

Development Of A Multiband Remote Sensing System For Determination Of Unsaturated Soil Properties, Cyrus D. Garner

Graduate Theses and Dissertations

A multiband system including active microwave sensing and visible-near infrared reflectance spectroscopy was developed to measure unsaturated soil properties in both field and laboratory environments. Remote measurements of soil volumetric water content (θv), soil water matric potential (ψ), and soil index properties (liquid limit [LL], plastic limit [PL], and clay fraction [CF]) were conducted. Field-based measurement of θv was conducted using a ground-based radar system and field measurements within 10 percentage points of measurements acquired with traditional sampling techniques were obtained. Laboratory-based, visible and near infrared spectroscopy was found to be capable of obtaining empirical, soil specific regression functions (partial …

Trihalomethane, Dihaloacetonitrile, And Total N-Nitrosamine Precursor Adsorption By Carbon Nanotubes: The Importance Of Surface Oxides And Pore Volume, Erin Needham

Graduate Theses and Dissertations

As drinking water sources become increasingly impaired, enhanced removal of natural organic matter (NOM) may be required to curb formation of disinfection byproducts (DBPs) upon chlor(am)ination. While carbon nanotubes (CNTs) can adsorb NOM, their properties for DBP precursor adsorption have not been elucidated. Nine types of CNTs were assessed for trihalomethane (THM), dihaloacetonitrile (DHAN), and total N-nitrosamine (TONO) precursor adsorption. Batch isotherm experiments were completed with lake water and, to simulate an impaired condition, effluent from a wastewater treatment plant (WWTP). Adsorption varied with CNT type and dose, with TONO precursors having the highest percent removals from WWTP effluent (up …

Effect Of Column Axial Load On Skewed Smf Rbs Connection Demands, Clovis Desrochers

Graduate Theses and Dissertations

Steel buildings in high seismic areas often require special structural systems to transfer large lateral forces induced by earthquake accelerations. The selection of an appropriate seismic steel system (braced frame, moment frame, shear wall, etc.) is often influenced by architectural considerations. Moment frame configurations offer the most architectural flexibility, but are limited by code prequalification requirements that limit the use of non-orthogonal (skewed) beam-column connection geometries. A recent study has investigated laterally skewed moment frame connections, indicating that skew increases the potential for column twist and column flange yielding; however, it is unclear how realistic column axial loads will affect …

A Comparison Of Force And Pressure Coefficients On Dome, Cube And Prism Shaped Buildings Due To Straight And Tornadic Wind Using Three Dimensional Computational Fluids Dynamics, Majdi A. A. Yousef

Graduate Theses and Dissertations

Tornadoes induce very different wind forces than a straight-line (SL) wind. A suitably designed building for a SL wind may fail when exposed to a tornado-wind of the same wind speed. It is necessary to design buildings that are more resistant to tornadoes. Most studies have been conducted to investigate tornado forces on cubic, gable-roof and cylinder buildings. However, little attention has been paid to investigate tornado force on dome buildings; hence, further research is conducted in this study. The forces on a dome, cube and prisms were analyzed and compared using Computational Fluid Dynamics (CFD) for tornadic and SL …

Response Of Unsaturated Soils Under Monotonic And Dynamic Loading Over Moderate Suction States, Aritra Banerjee

Civil Engineering Dissertations - Archive

The understanding of the mechanical behavior of the unsaturated soils has been significantly enhanced due to the recent advancement of technology and modifications to the conventional testing devices. However, the implementation of the concepts of unsaturated soil has lagged, mainly due to the risks associated with the development of civil infrastructure based on practically untested theories and the limited reliable prediction methods for compacted, expansive, residual, and collapsible soils, which requires reliable and comprehensive experimental data. Moreover, the tests on unsaturated soils are enormously time consuming and often exorbitantly expensive, which further hinders the use of unsaturated soil mechanics in …

Performance Of Cement Treated Recycled Aggregates Under Wetting-Drying Cycles In Pavement Base, Saif Bin Salah

Civil Engineering Theses - Archive

Resilient Modulus (MR) is one of the most important stiffness parameter to determine the thickness of a pavement layer (AASHTO 2003 pavement design guideline). Recent studies conducted by researchers on the variability of MR with wetting-drying (WD) and freeze-thaw (FT) cycles show that long-term durability is an important criterion to be considered in designing pavement base with recycled materials. At present, the design procedure does not consider the effect of deterioration of pavement layers due to seasonal variations and limited studies have been conducted to evaluate the effect of environmental deterioration on the reclaimed asphalt pavement (RAP) and recycled crushed …

Effect Of Manure And Enzyme On The Degradation Of Organic Fraction Of Municipal Solid Waste In Biocell, Anuja Sapkota

Civil Engineering Theses - Archive

More than half of total Municipal Solid Waste (MSW) generated is composed of organic degradable waste for developed countries and the percentage is even higher for developing countries. Handling of organic fraction of MSW has always been challenging due to environmental and economic reasons. Among all the MSW management alternatives, Sustainable Biocell concept has potential to solve environmental and economic concerns related to organic waste. This potential of Sustainable Biocell can be enhanced by accelerated decomposition of waste. Accelerated decomposition of organic fraction of MSW can be achieved by the addition of nitrogen rich, macro and micro nutrients such as …

The Study Of Screws Under Bending For Curtain Wall Head And Sill Anchors, Humberto Madero Mcentee

Civil Engineering Theses - Archive

The study of screws under bending is a very important topic for the solution of anchors (connections) of the vertical members of a Curtain Wall or Storefront that connects top and bottom thru Head and Sill anchors. When there are shims that create a gap between the connected anchor and the structure that connects to, the screws connecting the anchor to the structure would be under bending; very few or any tests are available showing the capacity of a screw under bending; this thesis would present tests and theory of screws under bending, and discussion/clarification of the behavior of these …

Applications Of Ultra-High Performance Fiber-Reinforced Concrete On Flexural Structural And Architectural Members, Venkatesh Babu Kaka

Civil Engineering Theses - Archive

This thesis presents the test results of a study on flexural and shear behavior of Ultra-High-Performance Fiber-Reinforced concrete (UHP-FRC) beams, reinforced with Grade 60 steel (ASTM A615/A615M), Grade 100 steel (ASTM A1035/A1035M) and Basalt fiber reinforced polymer (BFRP) bars. Ultra-high-performance fiber-reinforced concrete (UHP-FRC) has high compressive strength (> 22 ksi (150 MPa)) and exceptional compressive ductility. The use of UHP-FRC provides new opportunities for future infrastructure. However, structural design criteria have not been developed to fully utilize UHP-FRC’s excellent mechanical properties. Maximum useable compressive strain, ecu, specified in the current design codes (ACI 318 Building Code and AASHTO LRFD Bridge …

A Comparison Of Smart City Indicators For Three Top Ten Us Cities, Rasoul Adnan Abbas

Civil Engineering Theses - Archive

The world population has been increasing each year, and the immigration from rural to urban cities has increased as well. The United Nations has estimated that more than 66% of people worldwide live in urban area, and this urbanization trend will continue to increase, thereby generating challenges to the cities as they strive to provide health care, schools, and transportation. The urban population explosion has also caused problems to the environment and overall urban economy as the need for more housing, jobs, and community services require smart solutions. The term, smart city, has many definitions, but all of them agree …

Investigation Of Reuse Of Coal Fly Ash To Mitigate Landfill Methane Gas, Amin Homaei

Civil Engineering Theses - Archive

Methane (CH4) is a powerful greenhouse gas (GHG), contributing 32% of current climate forcing (US EPA, 2015). In 2014 the White House released the “Strategy to Cut Methane Emissions” as part of the Climate Action Plan. Landfills are one of the strategy’s 4 key sectors, contributing 18% of US methane emissions (US EPA, 2013). Even when landfills capture methane and burn it to produce electricity, around 25% of methane still leaks through landfill covers (US EPA, 2005). In natural environments, iron oxides, manganese oxides, nitrates, and sulfates have been shown to stimulate microbial anaerobic oxidation of methane (AOM) (Sivan et …

Design And Evaluation Of Modified Centerline Rumble Strips, Yong-Rak Kim, Tae Sun You, Laurence Rilett

Nebraska Department of Transportation: Research Reports

A centerline rumble strip (CLRS) is primarily installed on the centerline of undivided two-lane and two-way roadways to alert drivers that they are moving out of their intended travel lane. The main purpose of CLRSs is to reduce crossover collisions typically caused by inattentive, distracted, drowsy, or fatigued drivers. Despite the safety benefits, CLRSs that were milled over or adjacent to the centerline joint may increase or accelerate the deterioration and degradation of the pavement structure, which has been observed in Nebraska pavements. In this research project, new (or modified) CLRS designs were sought to reduce pavement damage, while satisfying …

Structural Competency And Environmental Soundness Of The Recycled Base Materials In North Texas, Mohammad Faysal

Civil Engineering Dissertations - Archive

Aggregates, which are derived from natural resources, are the most important raw materials used in pavement construction; however, depletion of the natural resources, increasing labor costs, and environmental concerns have led us to look for alternatives. Recycled materials, such as recycled crushed concrete aggregate (RCCA) and reclaimed asphalt pavement (RAP), can be used as an alternative to natural aggregates and can be obtained from construction of newer structures and demolition of existing structures, such as buildings, bridges, pavement, etc. Recycled materials can reduce the cost, depletion of natural resources, and construction debris. The properties of recycled materials are source-dependent, which …

Cost-Effective Monitoring Of Railroad Bridge Performance, Jose Alberto Gomez Romero Salazar

Civil Engineering ETDs

The railroad network carries 40 % of the freight in the US. Railroad bridges are the most critical part of the network and they need to be properly maintained for safety of operations. Railroad managers need to inspect the bridges in order to assess their structural condition. Railroad managers are interested in measuring displacements under train crossing events to prioritize their bridge management and safety decisions. However, bridge displacements are difficult to collect in the field, because they require a fixed reference from where to measure. Accelerations can be used to estimate dynamic displacements but to this date, the pseudo-static …

Subcontracting And The Survival Of Plants In The Road Construction Industry: A Panel Quantile Regression Analysis, Dakshina G. De Silva, Georgia Kosmopoulou, Carlos Lamarche

Economics Faculty Publications

This paper investigates how subcontracting parts of contracted work shapes entrants’ success and survival. We find that newly developed quantile regression approaches can be adapted to study survival of firms competing for government contracts in road construction. The method is applied on a data set that includes patterns of firm entry, exit and auction related information. We find an apparent increase in the business life of firms who subcontract out part of their projects. In Texas, these subcontracting effects appear to be more pronounced for firms with few or no options outside the industry, and among firms who contract out …