Civil and Environmental Engineering Commons^™

Geotechnical Properties Of The Travis Peak (Hosston) Formation In East Texas: A Compressive And Tensile Strength Analysis Using Regression Analysis., Pawan Kakarla

Electronic Theses and Dissertations

The estimation of rock mass strength is a key parameter in geotechnical engineering which is used in the design of geotechnical structures like tunnels, dams and slopes. Geotechnical engineering is the branch of civil engineering which works on the principles of soil and rock mechanics to evaluate subsurface conditions, stability of slopes, foundations of structures and construction of earthworks. The main focus of this study was to calculate the strength of Lower Cretaceous Travis Peak Formation rocks of East Texas and to check the accuracy by comparing it with Regression analysis. The parameters which were used were the Uniaxial Compression …

Smart Rock Technology For Real-Time Monitoring Of Bridge Scour And Riprap Effectiveness -- Design Guidelines And Visualization Tools, Genda Chen, Yan Tang, Yizheng Chen, Zhaochao Li, Chuanrui Guo, Liang Fan, Yi Bao, Xiuyan Hu, Matthew Klegseth

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study aims to further develop and demonstrate the recently-proposed smart rock technology for scour depth and protection effectiveness monitoring. A smart rock is one or two stacked magnets encased in a concrete sphere with a specially-designed rotational mechanism. Design guidelines, rotational mechanisms, remote measurement tools and localization algorithms of smart rocks were developed and validated at three bridge sites. The effect of steel reinforcement in bridge piers/deck on the orientation of gravity-controlled magnets was negligible. The localization accuracy with a single smart rock met a general requirement of less than 0.5 m in engineering applications. The spherical smart rock …

Hydraulic Performance Evaluation Of Evapotranspiration Cover Systems, Brett James De Vries

Civil Engineering Dissertations - Archive

Although alternative covers such as the evapotranspiration (ET) landfill cover system promise to provide equivalent or greater performance than conventional cover systems, uncertainties remain on the performance of these type of cover systems. The uncertainties associated with performance may derive from the relative newness of these covers (when compared to conventional landfill cover systems); and their dependency on relatively site-specific factors such as: climatic, vegetation, and soil conditions. As a results, the Texas Commission on Environmental Quality (TCEQ) requires a landfill facility to design and then verify the design and performance through site specific field scale testing (TCEQ 2012). Utilizing …

Novel Approach For Selective Decomposition Of Target Water Contaminants Onto Porous Titanium Dioxide, Abolfazl Zakersalehi

Civil Engineering Dissertations - Archive

Manipulation of physical and chemical properties of matter with nanoscale precision will enhance our ability for fabrication of material with intended characteristics for environmental applications. In this study we presented two main frameworks for addressing non-selectivity issue in TiO2 photocatalysts, which is believed to be a major drawback in full-scale application of this technology. First, a purely physical approach for enhancing selectivity of nanostructured TiO2 photocatalysts toward water target contaminants have been achieved via tailor-designing meso-porous structure of TiO2. This simple, yet effective method is mainly based on size-exclusion as a mean toward preferential decomposition. It was hypothesized controlled mesoporous …

Harmful Algal Blooms And Biological Toxins Productions; From Integrated Monitoring Approach To On-Site Solar Photocatalytic Decomposition, Hesam Zaman Khan Malayeri

Civil Engineering Dissertations - Archive

Occurrence of Harmful Algal Blooms (HABs) worldwide has caused concern to environmental and health authorities because of their potential to generate and release biological toxins. In particular, microcystins (MCs) produced from cyanobacteria are of great concern. MCs are among the most powerful natural poisons. The presence of MCs in drinking water sources has raised major concern. The overall goal of this research is to predict formation of biological toxins in water bodies and to develop a new sustainable approach to decompose them, if feasible, on-site and in real-time with minimal efforts, less chemicals, and low energy inputs. In order to …

Moisture Distribution Efficiency And Performance Evaluations Of Bioreactor Landfill Operations, Md Zahangir Alam

Civil Engineering Dissertations - Archive

Bioreactor landfills are operated in a modern engineered way to accelerate waste decomposition, gas production, and waste stabilization. The major aspect of a bioreactor landfill operation is associated with the addition of supplemental liquid or leachate recirculation, and the effective operation primarily depends on efficient moisture distribution throughout the waste mass, which enhances performance. The performance of an effective landfill operation can be assessed by several indicators, i.e., leachate generation, gas production, and landfill settlement. Bioreactor landfill operations have several significant economic and environmental advantages, but the impact of efficient moisture distribution and the assessment of performance through combined indicators …

Investigation Of Fiber-Reinforced Concrete Crack Width Measurement By Finite Element Method, Sina Abhaee

Civil Engineering Theses - Archive

This study presents numerical and experimental investigations of flexural cracking, post-cracking strength, and fracture energy of the dry-cast synthetic fiber reinforced concrete (FRC). Notched and un-notched beams for two fiber volume fractions were tested under flexural loading based on the recommendations of RILEM TC 162-TDF and ASTM C1609. The crack profile in terms of crack propagation and crack width, was assessed, using the two-dimensional digital image correlation (2D DIC) technique. Images of the specimen’s surface were captured during the test, and, surface deformation field was obtained by means of 2D DIC analysis. The nonlinear, 3D finite element method (FEM) modeling …

Innovative Gtfs Data Application For Transit Network Analysis Using A Graph-Oriented Method, Philippe Fortin, Catherine Morency, Martin Trépanier

Journal of Public Transportation

Public transit networks are constantly evolving in the face of frequent economic and social challenges. There exists a large knowledge base on travel demand; however, there is a shortage of information on travel supply and networks. To our knowledge, no analysis tool can, at this point, systematically characterize a network and observe changes over time in a structured and automated manner. This paper addresses this issue and proposes a graph-oriented method for developing an analysis tool that will characterize a single network and then provide the necessary means to compare two distinct networks. A time-expanded model was applied to import …

Applying Ahp And Clustering Approaches For Public Transportation Decisionmaking: A Case Study Of Isfahan City, Alireza Salavati, Hossein Haghshenas, Bahador Ghadirifaraz, Jamshid Laghaei, Ghodrat Eftekhari

Journal of Public Transportation

The main purpose of this paper is to define appropriate criteria for the systematic approach to evaluate and prioritize multiple candidate corridors for public transport investment simultaneously to serve travel demand, regarding supply of current public transportation system and road network conditions of Isfahan, Iran. To optimize resource allocation, policymakers need to identify proper corridors to implement a public transportation system. In fact, the main question is to adopt the best public transportation system for each main corridor of Isfahan. In this regard, 137 questionnaires were completed by experts, directors, and policymakers of Isfahan to identify goals and objectives in …

Assessing Park-And-Ride Efficiency And User Reactions To Parking Management Strategies, Krae E. Stieffenhofer, Michael Barton, Vikash Gayah V.

Journal of Public Transportation

Increasing the number of spaces at overutilized park-and-rides often is not possible due to budgetary and other constraints. Instead, transit agencies may instead seek to maximize the number of people that are able to use the existing spaces through various parking management strategies. Unfortunately, the efficiency of park-and-rides is difficult to measure, so agencies cannot accurately quantify existing use or improvement after parking management strategies have been applied. This study proposed and tested a method to measure the person-efficiency of park-and-ride lots through an onsite audit. Additionally, a user survey was proposed to confirm the audit results and unveil reactions …

Investigation Of Wheeled Mobility Device Orientation And Movement On Streetcars And Light Rail Vehicles During Normal And Emergency Braking, Andrea J. Mather, Katharine M. Hunter-Zaworski

Journal of Public Transportation

Wheeled mobility devices have been accessing public transit vehicles for decades, and most new rail transit systems are accessible. This has increased ridership by people with disabilities. Side-facing orientation on rail transit vehicles often is considered an option to increase capacity for wheeled mobility devices. This paper reports findings of a study of vehicle dynamics and wheeled mobility device orientation on rail transit vehicles. The study used acceleration data and field observations to evaluate wheeled mobility devices in longitudinal and side-facing orientations on streetcar and light rail vehicles. Results from the study include recommendations for longitudinal-oriented areas for wheeled mobility …

Lap Splice Development Length Of Rebar In Stabilized Hollow Interlocking Compressed Earth Blocks, Thomas S. Bowdey

Master's Theses

This thesis investigates the tensile performance of unconfined lap splices in specimens constructed from interlocking compressed earth block (ICEB) units. All lap splice specimens were constructed from hollow ICEB half units with one side grouting channel. ICEB units used in this research were exclusively produced from the Soeng Thai Model BP6 block press. The BP6 block press is currently manufactured in Thailand under the guidance and direction of the Center of Vocational Building Technologies (CVBT). All ICEB units and grout constructed for this research were created from mix proportions of soil, sand, cement, and water. Rebar bar sizes were restricted …

Characterization And Delineation Of Karst Geohazards Along Rm652 Using Electrical Resistivity Tomography, Culberson County, Texas, Adam F. Majzoub

Electronic Theses and Dissertations

The Delaware Basin of West Texas and southeastern New Mexico is the major western subdivision of the Permian Basin and a northern extension of the Chihuahuan Desert. The major evaporite unit within the Delaware Basin is the Castile Formation, which consists of gypsum/anhydrite and is highly susceptible to dissolution and karsting. Manifestations of karst within the Castile outcrop are abundant and include sinkholes, subsidence features and caves, both epigene and hypogene in origin.

Land reconnaissance surveys conducted during the summer of 2015 documented abundant karst landforms in close proximity to a major thoroughfare, RM 652, in Culberson County, Texas. 2D …

An Equivalent Plate Model With Orthotropic Material Properties For Adjacent Box-Beam Bridge Superstructure, Timothy Alexander Schnell

Masters Theses

Reflective cracking over the longitudinal joints of adjacent box-beam bridges is a welldocumented and recurrent problem; it is a concern because it leads to poor durability performance. These cracks develop during early stages of bridge construction and have not been eliminate by the design revisions implemented so far.

This study is aimed at developing a rational load demand analysis model for calculating the moment acting at the longitudinal joints in order to determine the impact of post-tensioning on mitigating reflective cracking.

The scope of the study includes calculating moment demand at the shear keys using a rational analysis model based …

Application Of Wavelet Transform In Structural Health Monitoring, Yashodhya Swarna Sri Dhanapala Liyana Kankanamge

Masters Theses

Structural Health Monitoring (SHM) is a process of implementing a damage detection strategy in structures to evaluate the condition of existing structures to ensure the safety of users in the future. The changes in the material, geometric and/or structural properties affect structural responses, which can be captured and analyzed for condition assessment. Various vibration-based damage detection algorithms have been developed in the past decades. Among them, the Continuous Wavelet Transform (CWT) gained popularity as an efficient method of signal processing to build a framework to identify model properties and detect damage in structures. In this study, the application of wavelet …

Safety Benefit Analysis Of Alternative Delineation Practices In Michigan, Brenda C. Burdick

Masters Theses

Among the many aspects of roadway design, one important system is roadway delineation. The main purposes of roadway delineation include regulating, warning, and guiding drivers in a safe manner. Delineation systems have the potential to reduce crashes. This research sought to perform safety benefit analysis of roadway delineation practices in Michigan. Through literature review, several delineation practices, selection criteria, and previously developed crash modification factors were researched. Even though several pavement marking materials have been implemented in Michigan, a safety benefit analysis of various materials had not been performed. Sites were selected, and pavement marking material inventory data were combined …

Bim Innovation Capability Programme: An Irish Bim Study, Barry Mcauley, Alan Hore, Roger West

Articles

In 2011 the Royal Institute of Architects Ireland (RIAI) conducted a survey which found that BIM adoption within Ireland was quite low at 16%. Over the last five years these figures have risen significantly, with the 2016 Irish Digital Transition Survey reporting that 76% of respondents possess confidence in their organisation’s BIM skills and knowledge. This represents a significant shift of BIM adoption in Ireland over the last five years.

The BIM Innovation Capability Programme (BICP) Irish BIM study, builds on the findings from the BICP Global BIM Study by providing an in depth review of BIM in Ireland with …

Nondestructive Evaluation Of Steel Bridges: Methods And Applications, Theodore Hopwood Ii, Christopher Goff, Jared Fairchild, Sudhir Palle

Kentucky Transportation Center Research Report

Nondestructive evaluation (NDE) methods can be used to assess in-service steel bridges for problematic conditions caused by factors such as design, manufacturing, fabrication, and the service effects of traffic and corrosion. This report discusses typical NDE test methods used on bridges, including penetrant testing, magnetic particle testing, eddy current testing, ultrasonic testing (including phased array testing), radiography, and acoustic emission testing. NDE operations such as flaw location, characterization, and sizing are covered as well. Results of a national survey of departments of transportation’s (DOTs) use of NDE are presented. A simple procedure for using NDE to address DOT bridge concerns …

Condition Factor Calibration For Load And Resistance Factor Rating Of Steel Girder Bridges, Pranav M. Shakya

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The Load and Resistance Factor Rating (LRFR) is a reliability-based rating procedure complementary to the Load and Resistance Factor Design (LRFD). The intent of LRFR is to provide consistent reliability for all bridges regardless of in-situ condition. The primary difference between design and rating is the uncertain severity and location of deterioration, including the potential future loss of strength for an element already evidencing deterioration. Ostensibly, these uncertainties are accounted for by applying an additional strength reduction factor: the condition factor, ϕ_c. Currently, condition factors are nominally correlated to the condition of the member, which can be Good, …

Multimedia Techniques For Construction Education And Training, Wayne A. Bunnell

Open Access Theses

The current profession of civil engineering often focuses education and training on code compliance rather than constructability and construction techniques. Also, it is well accepted that it takes a decade or more for engineers to develop a high-level project construction understanding and many state departments of transportation rely on in-field training for entry-level inspectors, with little or no education provisions for contractors. This research investigated the use of time-lapse photography to develop training and education material that will improve the understanding of project construction and crucial quality control specifications of an entry-level engineer, contractor, or inspector. Overall, the project team …

New Screening Method For Overweight Vehicles, Goran Veljko Milutinovic

Open Access Theses

Throughout the U.S., state agencies are issuing an increasingly large number of permits for overweight vehicles every year. There are various methods used by state agencies to process permit requests; the Indiana Department of Transportation employs a screening process that consists of the Tennessee Formula (allowable weight is determined and checked, for every axle group) in combination with the Gross Vehicle Weight limit. If a permit truck satisfies these two screening criteria, it is permitted; otherwise, it is further processed with refined analyses. The Tennessee Formula is based on Allowable Stress Design. However, most design and evaluation conducted today is …

Quantifying Asphalt Emulsion-Based Chip Seal Curing Times Using Electrical Resistance Measurements, Miguel A. Montoya Rodriguez

Open Access Theses

Chip seals are among the most cost-effective surface treatments available for asphalt pavement preventive maintenance. Chip sealing typically consists of covering a pavement surface with asphalt emulsion into which aggregate chips are embedded. The asphalt emulsion cures through the evaporation of water, which helps to provide mechanical strength for the chip seal. Ultimately, the curing process enables the emulsion to adhere to the pavement while keeping the aggregate chips in place. The curing time for the chip seal depends on many factors, such as the asphalt emulsion and aggregate types, aggregate moisture content, emulsion and aggregate application rates, and environmental …

Effect Of Temperature On Deep Lined Circular Tunnels In Isotropic And Transversely Anisotropic Elastic Ground, Fei Tao

Open Access Theses

A tunnel is a passageway constructed through soil or rock. It is one of the most important underground structures and has been widely used in transportation. Much research has been done on tunnel performance and on the interaction between ground, excavation, liner installation and support. The work has provided a better understanding of the interplay that exists between deformations and stresses transferred from the ground to the support. Significant insight into the problem has been provided by closed-form analytical solutions. A number of analytical formulations have been obtained for underground openings and lined tunnels under different scenarios, namely shallow or …

The Influence Of Alkalinity Of Portland Cement On The Absorption Characteristics Of Superabsorbent Polymers (Sap) For Use In Internally Cured Concrete, Juan D. Tabares Tamayo

Open Access Theses

The concrete industry increasingly emphasizes advances in novel materials that promote construction of more resilient infrastructure. Due to its potential to improve concrete durability, internal curing (IC) of concrete by means of superabsorbent polymers (SAP) has been identified as one of the most promising technologies of the 21st century. The addition of superabsorbent polymers into a cementitious system promotes further hydration of cement by providing internal moisture during the hardening and strength development periods, and thus limits self-desiccation, shrinkage, and cracking.

This thesis presents the work performed on the series of cement pastes with varying alkalinity of their pore solutions …

Fea Methodology For System-Level Redundancy Evaluation: Application To Non-Composite Steel Bridges, Francisco Javier Bonachera Martin

Open Access Dissertations

Currently, all steel bridges with members designated as Fracture Critical Members (FCMs) are required to undergo hands-on inspections every 24 months. A FCM is a primary steel tension member (or portion of) which failure results in collapse or loss of serviceability of a bridge. However, presently, there are no codified procedures used to evaluate system-level redundancy in steel bridges. In this dissertation, finite element analysis (FEA) procedures, techniques and inputs were researched in order to develop bridge models that account for the mechanisms that lead to redundant capacity after the failure of a primary steel member. These mechanisms include partial …

The Effects Of Chloride-Based Deicing Chemicals On Degradation Of Portland Cement Mortars With Alkali Reactive Aggregate, Charles Yicheng Chiu

Open Access Dissertations

The assessment of the influence of deicing chemicals on alkali reactivity of aggregates is still an area of active research, particularly with respect to the combined effects of long-term exposure to deicers, freezing and thawing cycles, and wetting and drying cycles. In order to develop a more comprehensive view of these topics, the present study was conducted in three phases. The focus of the first phase was on studying the effects of the chloride-based deicers on the alkali silica reaction (ASR) using accelerated test methods (i.e. the test was performed at high temperature (80 °C) as per modified ASTM C1260). …

Bridge Maintenance To Enhance Corrosion Resistance And Performance Of Steel Girder Bridges, Luis M. Moran Yanez

Open Access Dissertations

The integrity and efficiency of any national highway system relies on the condition of the various components. Bridges are fundamental elements of a highway system, representing an important investment and a strategic link that facilitates the transport of persons and goods. The cost to rehabilitate or replace a highway bridge represents an important expenditure to the owner, who needs to evaluate the correct time to assume that cost. Among the several factors that affect the condition of steel highway bridges, corrosion is identified as the main problem. In the USA corrosion is the primary cause of structurally deficient steel bridges. …

Fracture Analysis In Biomimetic Bouligand Architectures, Nobphadon Suksanqpanya

Open Access Dissertations

The Bouligand structure, which is found in many biological materials, is a hierarchical architecture that features uniaxial fiber layers assembled periodically into a helicoidal pattern. Many studies have highlighted the high damage-resistant performance of Bouligand structures and its biomimetic materials. One of the outstanding species with the Bouligand structures is the smashing Mantis Shrimp, Odontodactylus Scyllarus, (or stomatopod) due to its capability of generating high speed, high acceleration blows using its raptorial appendage to defeat highly armored preys. The load-bearing part of this appendage, the dactyl club, contains an interior region, which is mainly characterized by the Bouligand structure. This …

Geometric Accuracy Evaluation Of Mobile Terrestrial Lidar Surveys With Supporting Algorithms, Chisaphat Supunyachotsakul

Open Access Dissertations

Mobile Mapping System (MMS) technology is widely used for many applications, hence quantifying its accuracy is a very important and essential task and is a primary focus of this research. In general, to perfrom geometric accuracy evaluation of MMS data, validation points/features are needed. A method is needed to capture a point feature off the roadway in a position where a target on the ground surface would not be visible to the scanner. In this study, eight sphere targets with 14" diameter were placed on the shoulder of the roadway over validation points on the ground. The sphere targets were …

Policy Design Tool For Managing Indoor Residential Water Demand In Water-Scarce Regions, Mujahed M. Thneibat

Open Access Dissertations

In view of population growth; climate change; and economic evolution, water resources in numerous parts of the world have reached their natural capacities. Consequently, the ability of many countries to grow; meet the basic needs of inhabitants; and protect the environment will be endangered like never before unless water resources are smartly handled and managed. ^ In the past few decades, many developed and developing countries have suffered from water scarcity, and more are certain to follow. The water security dilemma is much more challenging in developing countries. Water utilities have had to follow regulatory plans to manage demand on …