Civil and Environmental Engineering Commons^™

Engaging New Partners In Transportation Research: Integrating Publishing, Archiving, And Indexing Of Technical Literature Into The Research Process, Mark P. Newton, Darcy M. Bullock, Charles Watkinson, Paul J. Bracke, Deborah K. Horton

Libraries Research Publications

transportation research. The United States Department of Transportation (USDOT) annually invests approximately $180 million in State Planning and Research (SPR) and University Transportation Centers (UTC). This investment generates an extensive portfolio of “grey literature” that is not yet uniformly cataloged or accessible, despite the best efforts of the National Technical Information Service, the Transportation Research Board, and the National Transportation Library. This paper reports on a review of publishing and archiving practices for transportation research technical reports, summarizes best practices, and recommends that UTC and SPR research programs seek and strengthen partnerships with libraries to facilitate improved production, stewardship and …

Bayesian Sediment Transport Model For Unisize Bed Load, Mark L. Schmelter, Mevin B. Hooten, David King Stevens

Civil and Environmental Engineering Faculty Publications

Fluvial sediment transport studies have long underscored the difficulty in reliablyestimating transport model parameters, collecting accurate observations, and makingpredictions because of measurement error, natural variability, and conceptual modeluncertainty. Thus, there is a need to identify modeling frameworks that accommodate theserealities while incorporating functional relationships, providing probability-basedpredictions, and accommodating for conceptual model discrimination. Bayesian statisticalapproaches have been widely used in a number of disciplines to accomplish just this, yetapplications in sediment transport are few. In this paper we propose and demonstrate aBayesian statistical approach to a simple sediment transport problem as a means toovercome some of these challenges. This approach provides …

Comparative Life Cycle Assessments Of Lignocellulosic And Algae Biomass Conversion To Various Energy Products Through Different Pathways, Maria Juliana Pinilla

USF Tampa Graduate Theses and Dissertations

Bioenergy has the potential to reduce the world's dependence on fossil fuels, and to decrease the CO2 emissions due to fossil combustion. Lignocellulosic and algae biomass have been presented as promising feedstocks for bioenergy production.

In this study, a comparative Life Cycle Assessment (LCA) has been developed to evaluate the environmental impacts associated with different energy products via different routes across the whole life of algal and lignocellulosic bioenergy. Results were compared per energy basis, the production of 1 million BTU of energy products.

For the development of the comparative algae biomass conversion LCA, algal biomass was converted to liquid …

Flexible Connection Elastomeric Rubber As A Pounding Resisting Element Between Two Adjacent Buildings, Yuskar Lase, James Jatmiko Oetomo

Makara Journal of Technology

Flexible Connection Elastomeric Rubber as a Pounding Resisting Element between Two Adjacent Buildings To solve pounding problem of two adjacent buildings, structural designer usually employs a dilatation between the structures or make the two structures as a monolith structure. Other alternative is by using an elastomeric rubber as a pounding resisting element between the two structures. Effectiveness in applying elastomeric rubber component as flexible connection of two adjacent structures is the main focus of this paper. Various simulations such as structure models, earthquake excitations and openings in gap element are studied. Observation of maximum structural responses will be performed for …

Improvement Of High Temperature Oxidation Of Low Carbon Steel Exposed To Ethanol Combustion Product At 700 °C By Hot-Dip Aluminizing Coating, Mohammad Badaruddin

Makara Journal of Technology

Low carbon steel (AISI 1005) was coated by hot-dipping into a molten Al-10% Si bath at 700 °C for 18s. After hotdipping treatment, the coating layers consisted of Al, Si, FeAl3, τ5-Fe2Al8Si, and Fe2Al5. The bare steel and the aluminized steel were isothermally oxidized at 700 °C in ethanol combustion product at atmospheric pressure for 49 h. The aluminized steel shows good performance in high temperature oxidation because the formation of Al2O3 layer on the coating surface. The growth of iron oxide nodules on the surface coating was accelerated by rapid outward diffusion of Fe-ions due to the presence of …

Effect Of Copper Addition On Mechanical Properties And Electrical Conductivity Of Pp/C-Cu Bipolar Plate Composites, Anne Zulfia, Taufik Abimanyu, Verina Warga Dalam

Makara Journal of Technology

Effect of Copper Addition on Mechanical Properties and Electrical Conductivity of PP/C-Cu Bipolar Plate Composites. Bipolar plate is a major component in PEM fuel cell which possess main function of collecting and removing electrons from anode to cathode. Therefore, materials for bipolar plates produced must have high electrical conductivity. To obtain bipolar plate materials which is cheap, lightweight and high conductivity, so it is developed bipolar plates material based on PP/C-Cu composite. PP/C-Cu composites has been made by mixing all materials then compounding, rheomix, hot blending and hot press. Cu (Copper) has been used various from 0.1 wt%, 1 wt% …

Application Of Principal Component Proximity Transform And Geostatistics Methods For Volume Shale Distribution As Reservoir Characreristic Imaging In Seismic 3d, Nur Islami

Makara Journal of Technology

Application of Principal Component Proximity Transform and Geostatistics Methods for Volume Shale Distribution as Reservoir Characreristic Imaging in Seismic 3D. Principal component proximity transform (PCPT) technique was used to predict the content of volume shale into seismic data in reservoir modeling framework. The goal in this research is to get the volume shale imaging in three dimensions and allow for reservoir modelling. The reservoir modelling requires an integrated quantitative and qualitative data sources collected separately, such as well and seismic data. Integrating PCPT and Geostatistic methods can generate the detail information for characterization of reservoir’s properties. Finally, it shows that …

Application Of Empirical Orthogonal Function Models To Analyze Shoreline Change At Bangkalan Madura, Darius Arkwright, Suntoyo Suntoyo

Makara Journal of Technology

Bangkalan’s shoreline, especially on the opposite side of Surabaya, has been evaluated to determine the morphological changes due to wave attack, near-shore current, long-shore sediment transport and coastal configuration. This research aims to determine the dominant patterns of variation of Bangkalan’s shoreline change, expressed by Eigen-function in empirical orthogonal function (EOF) models. That was started with data collection such as oceanographic data (wave and tidal), bathymetry and topographic map and sediment data. All data was used for forecasting two-monthly shoreline. Coordinate of two-monthly shoreline was used as input of EOF model. The first Eigen mode is a profile of shoreline …

Establishment Code Hand Palm (Palm Code) 2d Gabor-Based Method, I Ketut Gede Darma Putra, Wira Bhuana, Erdiawan Erdiawan

Makara Journal of Technology

Establishment Code Hand Palm (Palm Code) 2D Gabor-Based Method. Palmprint is relatively new in physiological biometrics. Palmprint ROI segmentation and feature extraction are two important issues in palm print recognition. This paper introduces two steps in the center of mass moment method for ROI segmentation that will be applied in the Gabor 2D filter to obtain palm code as palmprint feature vector. Normalized Hamming distance was used to measure the similarity degrees of two feature vectors of palmprint. The system was tested using database 1000 palmprint images generated from 5 samples from each of the 200 persons randomly selected with …

The Effectiveness Of Anaerobic Baffled Reactor And Rotating Biological Contactor In Batik Wastewater Treatment, Augustinus Ignatius Kristijanto, Widhi Handayani, Purwanti Asih Anna Levi

Makara Journal of Technology

Batik is one of popular arts of Indonesia. The batik industries in Sragen, Central Java, are prepared to compete in global market. In order to realize that objective, batik products should fulfill some qualifications, one of which is “environmental friendliness”. As batik production is usually generating wastewater which pollutes the environment, the technology of wastewater treatment should be developed to solve the problem. This preliminary study has been done to assess the effectiveness of anaerobic baffled reactor (ABR) and rotating biological contactor (RBC) in batik wastewater treatment. In 40 days of treatment period, the ABR performance in reducing pollutants showed …

Physical Characterization And Desulfurization Of Biobriquette Using Calcium-Based Adsorbent, Mahidin Mahidin, Asri Gani, Khairil Khairil

Makara Journal of Technology

Combustion of coal and co-combustion of their co-fuel contribute to gas emissions. Among the gas emissions are SOx, NOx, CO and CO2. Introduction of calcium based adsorbent is addressed to absorb SO2 that release to the atmosphere during the combustion process. Objective of the research is at first to observe the physical characteristics of biobriquettes as a function of briquette compositions (coal to palm kernel shell ratios) and Ca/S ratios (Ca in adsorbent and S in briquette) using a natural adsorbent (shellfish waste). The second objective is to investigate desulfurization characteristics as a function of Ca/S ratios and desulfurization temperatures …

Flutter Analysis Of Rx-420 Balistic Rocket Fin Involving Rigid Body Modes Of Rocket Structures, Novi Andria

Makara Journal of Technology

Flutter Analysis of RX-420 Balistic Rocket Fin Involving Rigid Body Modes of Rocket Structures. Flutter is a phenomenon that has brought a catastrophic failure to the flight vehicle structure. In this experiment, flutter was analyzed for its symmetric and antisymmetric configuration to understand the effect of rocket rigid modes to the fin flutter characteristic. This research was also expected to find out the safety level of RX-420 structure design. The analysis was performed using half rocket model. Fin structure used in this research was a fin which has semispan 600 mm, thickness 12 mm, chord root 700 mm, chord tip …

Analytical And Computational Simulation Approaches To Design Low Energy Glass Block, Floriberta Binarti, Agustinus Djoko Istiadji, Prasasto Satwiko, Priyo Tri Iswanto

Makara Journal of Technology

Analytical and Computational Simulation Approaches to Design Low Energy Glass Block. An environmentally friendly process was developed to produce a low embodied energy glass block from waste glasses. The energy efficiency of the glass block is represented by its thermal conductance (U)

Medium Density Fibreboard Made Of Acetylated Sludge From Paper Mill, Luthfi Hakim, Evalina Herawati, I Nyoman Jaya Wistara

Makara Journal of Technology

Medium Density Fibreboard Made of Acetylated Sludge from Paper Mill. Research of using sludge as raw material for making medium density fibreboard (MDF) was useful to create additional value of sludge. The objective of the research was to evaluate physical properties, mechanical properties, and durability of MDF from acetylated sludge in 4 levels of acetate anhydride (0%, 3%, 5%, and 7%) with 3 replicates. The MDF was made using dry process. After materials were mixed with adhesives, they were pressed using hotpress under 170 oC temperature and 45 Pa pressure for 25 minutes. The size of the MDF sample was …

Optimation Of Nitrogen And Phosphorus In Azolla Growth As Biofertilizer, Hany Handajani

Makara Journal of Technology

Nitrogen is one of the most important minerals for living organisms. Azolla is known as a small water fern which can fix nitrogen through the symbiotic association with the blue green algae Anabaena. Experimental studies were carried out in the glass house, investigating the growth of Azolla using different levels of nitrogen and phosphorus in the media. The experiment used 12 treatments with 3 levels of nitrogen (0, 5, and 10 mg atom/L) and 4 levels of phosphorus (0, 10, 20, and 30 mg atom/l) in a factorial design with 3 replicates. The results show that the highest biomass for …

Antibacterial Activity Of Papaya Leaf Extracts Against Pathogenic Bacteria, Elisa Friska Romasi, Jessica Karina, Adolf Jan Nexson Parhusip

Makara Journal of Technology

It was reported that the extracts of papaya leaves could inhibit the growth of Rhizopus stolonifer. Antibacterial activity of Carica papaya leaf extracts on pathogenic bacteria was observed in this study. Papaya leaves were extracted by using maceration method and three kinds of solvents: ethanol, ethyl acetate, and hexane. Papaya leaf extracts were tested against Bacillus stearothermophilus, Listeria monocytogenes, Pseudomonas sp., and Escherichia coli by agar diffusion method. The objectives of this study were to determine extract ability against pathogenic bacteria, to observe the influence of pH, NaCl, and heat on extracts ability, and to observe extract ability against B. …

Cassava Pulp As A Biofuel Feedstock Of An Enzymatic Hydrolysis Proces, Djuma’Ali Djuma’Ali, Nonot Soewarno, Sumarno Sumarno, Dyah Primarini, Wahono Sumaryono

Makara Journal of Technology

Cassava pulp, a low cost solid byproduct of cassava starch industry, has been proposed as a high potential ethanolic fermentation substrate due to its high residual starch level, low ash content and small particle size of the lignocellulosic fibers. As the economic feasibility depends on complete degradation of the polysaccharides to fermentable glucose, the comparative hydrolytic potential of cassava pulp by six commercial enzymes were studied. Raw cassava pulp (12% w/v, particle sizeμm) hydrolyzed by both commercial pectinolytic (1) and amylolytic (2) enzymes cocktail, yielded 70.06% DE. Hydrothermal treatment of cassava pulp enhanced its susceptibility to enzymatic cleavageas compared to …

Alos/Palsar Image Processing Using Dinsar And Log Ratio For Flood Early Detection In Jakarta Based On Land Subsidences, Dodi Sudiana, Mia Rizkinia

Makara Journal of Technology

Flood that occurred in Jakarta is not only influenced by rainfall, urban planning system and drainage alone, but also may be involved land subsidence (LS). LS is possible in because Jakarta stands on top of layers of sediments and the presence of ground water consumption in very large quantities. In this research, the Advanced Land Observing Satellite (ALOS)/Phased Array type L-band Synthetic Aperture Radar (PALSAR) data was processed to determine the level of LS in Jakarta area and its relation to flood potential area. Differential interferometry method (DInSAR) was performed on two PALSAR data with different acquisition years, i.e. 2007 …

Code Of Standard Practice For Cold-Formed Steel Structural Framing, 2011 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Soil Chemistry And The Recovery Of Sensitive Watersheds From Chronic Acidification, Chris E. Johnson

Civil and Environmental Engineering - All Scholarship

No abstract provided.

The Relationship Between Vmt And Economic Activity, B. Starr Mcmullen, Nathan Eckstein

TREC Final Reports

Vehicle miles traveled (VMT) in the U.S. have exhibited an upward trend over time similar to that observed for gross domestic product (GDP) and personal income (PI). While conventional wisdom suggests that economic growth leads to more driving and thus higher VMT, it is theoretically possible that the causation could also be the other way around. If causation is from VMT to GDP, then legislation such as the Federal Surface Transportation Policy and Planning Act of 2009’s directive to annually reduce national per capita VMT could potentially have an adverse impact on overall economic activity.

This study uses times series …

Future Flooding Impacts On Transportation Infrastructure And Traffic Patterns Resulting From Climate Change, Heejun Chang, Martin Lafrenz, Il-Won Jung, Miguel A. Figliozzi, Rolando Melgoza, David Ruelas, Deena Platman, Cindy Pederson

Geography Faculty Publications and Presentations

This study investigated potential impacts of climate change on travel disruption resulting from road closures in two urban watersheds in the Portland metropolitan area. We used ensemble climate change scenarios, a hydrologic model, stream channel survey, a hydraulic model, and a travel forecast model to develop an integrated impact assessment method. High-resolution climate change scenarios are based on the combinations of two emission scenarios and eight general circulation models. The Precipitation-Runoff Modeling System was calibrated and validated for the period 1988-2006, and simulated for determining the probability of floods from 2020-2049. We surveyed stream cross sections at five road crossings …

Effects Of Column Stiffness On Seismic Behavior Of Steel Plate Shear Walls, Xuhua Guo

Master's Theses

Steel plate shear walls (SPSWs) are a lateral force resisting system consisting of thin infill steel plates surrounded by boundary frame members. The infill steel plates are allowed to buckle in shear and subsequently form diagonal tension field actions during earthquake events. Hysteretic energy dissipation of this system is primarily achieved through yielding of the infill plates. Conceptually, in a SPSW system with ideally rigid columns pinned to ground, the infill plates at different stories will yield simultaneously as a result of the lateral loads. However, when the columns become flexible, infill plate yielding may initially occur at one story …

Guidelines For Road Diet Conversions, Nikiforos Stamatiadis, Adam Kirk, Chen Wang, Andrea Cull, Nithin Agarwal

Kentucky Transportation Center Research Report

The purpose of this report is to document the development of the guidelines for the road diet conversions prepared for the Kentucky Transportation Cabinet. The guidelines consider operational and safety aspects of the conversions to assist in the preliminary determination of whether a road diet conversion is appropriate for a given roadway segment. The guidelines provide suggested cross section designs, transition to and from the road diet section and a flow chart for determining the appropriate actions.

States’ Support Of Non-Highway Modes Of Transportation: Investigation And Synthesis, Chuck Knowles, Candice Y. Wallace, Benjamin L. Blandford, Timothy J. Brock, Andrew Martin

Kentucky Transportation Center Research Report

The objective of this study was to determine how Kentucky and other selected states support and assist non-highway transportation modes and to identify leading and innovative initiatives. For the purposes of this study, the non-highway modes are aviation, public transportation, rail, and waterways. This summary will briefly discuss the rationale, objectives, and methodology for this study. It also provides an overview of the outcomes of the study and the modal matrices.

Development Of Alternative Wood-Post Mgs Approach Guardrail Transition, Scott K. Rosenbaugh, Kevin D. Schrum, Ronald K. Faller, Karla A. Lechtenberg, Dean L. Sicking, John D. Reid

Nebraska Department of Transportation: Research Reports

No abstract provided.

Strengthening Of Steel Beams Using Mechanically Anchored Carbon Fiber Reinforced Polymers Laminates, Mohammed Monir Makin Ajan Alhadid

Theses

على مدى العقدين المنصرمين من الزمن تم إستخدام الألياف البلاستيكية المسلحة بشكل فعال و عملي في تقوية وتدعيم المنشأت الهندسية المختلفة بما في ذلك العناصر الإنشائية الخرسانية والطابوقية والخشبية, وطوال هذه الفترة الزمنية جرت أبحاث مفصلة حول العالم لدراسة مدى فاعلية مثل هذه الألياف في تقوية العناصر المعدنية و ذلك عن طريق تثبيتها بواسطة مواد شديدة الإلتصاقو ولقد كشفت الدراسات المنشورة أن هذه الطريقة في التثبيت سواءً في العناصر الخرسانية أو العناصر المعدنية تؤدي الي الانهيار الفجائي للعناصر المدعمة عند قيم التحميل المرتفعة ما لم يتم اتخاذ احتياطات أخرى وخصوصاً عند أطراف هذه الألياف، وبالمقابل فإن هناك دراسات أخرى أجريت …

Bs News November/December

Building Services Engineering

No abstract provided.

Refining Greenstep: Impacts Of Vehicle Technologies And Its/Operational Improvements On Travel Speed And Fuel Consumption Curves, Kelly Clifton, Alexander Y. Bigazzi

Civil and Environmental Engineering Faculty Publications and Presentations

This report describes analysis undertaken to establish a method for incorporating traffic operations and ITS strategies into the GreenSTEP model. We first discuss operations impacts on fuel economy and delay from the literature. Then, an investigation of delay adjustments in GreenSTEP shows that different methods of representing delay changes lead to similar (and small) impacts on fuel economy. From this result we establish average speed adjustment by congestion level as the preferred method for incorporating delay effects from operations improvements. An investigation of aggregate traffic operations impacts produces estimates of base speeds without operations improvements, maximum speeds with full operational …

Neutron Imaging And Applications: A Reference For The Imaging Community, Edmund Perfect, Chu-Lin Cheng, Peter Lehmann

Civil Engineering Faculty Publications

No abstract provided.