Civil and Environmental Engineering Commons^™

Impact Of Jet Grouting On The Lateral Strength Of Soil Surrounding Driven Pile Foundations, Matthew E. Adsero

Theses and Dissertations

Jet grouting was used to strengthen the soft soil surrounding the piles and the pile cap of two full-scale driven pile foundations. Soilcrete columns, created by jet grouting, were placed underneath the pile cap and surrounding the piles of the first foundation. Two rows of soilcrete columns were placed around the perimeter of one-side of the second. All of the jet grouting took place after construction of the pile caps. Laboratory testing of the soilcrete slurry showed the columns as having a design unconfined compressive strength of 550-650 psi, compared with the native soil strength of only 6-8 psi (850-1150 …

Nrcs Curve Number Calibration Using Usgs Regression Equations, Charlotte M. Mecham

Theses and Dissertations

The Curve Number (CN) method of estimating the direct runoff response to rainfall events was originally developed in the 1950's primarily for agricultural purposes in the mid-western United States. The accuracy of the CN method is greatly affected by variation of the soil type and land use of the region. Curve Numbers developed for a given region are not appropriate for application in other regions. In order to produce reliable, consistent results, Curve Numbers must be calibrated for the area in which the CN method is to be applied. Calibration is ideally accomplished by direct measurement using several rain and …

Temporal Variability Corrections For Advanced Microwave Scanning Radiometer E (Amsr-E) Surface Soil Moisture: Case Study In Little River Region, Georgia, U. S., Minha Choi, Jennifer M. Jacobs

Civil & Environmental Engineering

Statistical correction methods, the Cumulative Distribution Function (CDF) matching technique and Regional Statistics Method (RSM) are applied to adjust the limited temporal variability of Advanced Microwave Scanning Radiometer E (AMSR-E) data using the Common Land Model (CLM). The temporal variability adjustment between CLM and AMSR-E data was conducted for annual and seasonal periods for 2003 in the Little River region, GA. The results showed that the statistical correction techniques improved AMSR-E's limited temporal variability as compared to ground-based measurements. The regression slope and intercept improved from 0.210 and 0.112 up to 0.971 and -0.005 for the non-growing season. The R-2 …

2008 Directory Of Indiana State, County, City And Town Officials Responsible For Road And Street Work, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Directory

Contact information for agency officials and employees responsible for Indiana’s local road infrastructure.

Implementing Mass Nutrient Balance Procedures On Swine Production Facilities, Richard Koelsch, Alan Sutton

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Whole Farm Nutrient Balance (WFNB) approaches have been used to provide a measure of environmental performance (Aarts et al., 1992; Lanyon and Beegle, 1993; Klausner, 1995). Whole farm balance concepts are used as part of the Netherlands Mineral Accounting System public policy that includes compulsory mineral input and output reports from livestock farms and levies for excess imbalances (Jongbloed and Lenis, 1998). Procedures for measuring WFNB will be followed in measurements made on commercial swine facilities for 2006 and 2007. The conclusions developed based upon data from 13 for 2006 include:

• On average, the participating swine producers import 1.5 units …

Ole Miss Engineer 2008

Ole Miss Engineer

No abstract provided.

Sustainable Portland: Implementation Series 1, New England Environmental Finance Center

Climate Change

When the Sustainable Portland Task Force Report was released in November 2007, under the leadership of Mayor Jim Cohen, Portland Councilor Kevin Donoghue had the idea that students at the Muskie School of Public Service might be able to help implement recommendations from the report. It may have helped that Kevin was himself a graduate of the Community Planning and Development Master’s program at the Muskie School, but it was a good idea nevertheless. He approached Professor Sam Merrill in the CPD program, who spoke with the new Mayor Ed Suslovic about a possible partnership between the City and the …

An Integrated System Dynamics Model For Analyzing Behaviour Of The Social-Economic-Climatic System: Model Description And Model Use Guide, Evan G. R. Davies, Slobodan P. Simonovic

Water Resources Research Report

The society-biosphere-climate model described here takes an integrated assessment approach to simulating global change. It consists of eight individual sectors that reproduce the main characteristics of the climate, carbon cycle, economy, land use, population, surface water flow, and water demand and water quality sectors at a global scale, each of which is described individually in the report, both in terms of the theoretical foundation and mathematical basis, and then connected through feedbacks to other sectors in order to recreate the whole system. Several of the sectors build on previous modelling work, but their manner of integration is novel, as are …

Impact Of Lateral Swell Pressure On Retaining Structure Design Using Expansive Cohesive Backfill, Mark G. Thomas

Civil Engineering Theses - Archive

Since cohesive soils are difficult to drain once becoming saturated, in order to reduce lateral earth pressures exerted by saturated cohesive soils on retaining structures, retaining wall designs most always specify use of drainable granular backfill. However, costs for the importation of granular backfill materials continues to increase due to depletion of these materials in certain areas, and to the ever-increasing costs for material transportation, largely related to increased labor and fuel prices. These factors, together with the costs of removing replaced cohesive materials, and coupled with resource and environmental conservation concerns, are driving efforts to develop reasonable and prudent …

Non-Linear Finite Element Dynamic Analysis Of Tapered Hollow Steel Poles For Passive Base Isolation, Tri Le

Civil Engineering Dissertations - Archive

Long tapered poles are commonly used to support Closed Circuit Television (CCTV) Cameras for security and traffic monitoring. Images received from CCTV are normally distorted depending on the wind induced vibration characteristics of the forcing function. To reduce image distortion, three approaches are integrated to optimize the process, which are: (1) development of equations for pole's frequency of vibration in terms of its geometric variables; (2) development of a mechanical damping device to isolate the pole's vibration from that of the camera; and (3) development of an electrical image processing device for image corrections. The identification of a pole's natural …

Dynamic Properties Of Compacted Soils Using Resonant Column With Self-Contained Bender Elements, Roshnara Mohammad

Civil Engineering Theses - Archive

A comprehensive series of resonant column and bender elements tests were simultaneously performed in the developed RC/BE apparatus. RC/BE tests were conducted on compacted specimens of poorly graded sand (SP) and high plasticity clay (CH) prepared at different moisture contents (17.7, 22.1, 25.5, 30.2% by weight for clay, and 5, 10, 15, 20% by weight for sand) and under different confining pressures (0, 2.5, 5.0, and 10.0 psi, or 0, 17.2, 34.4, 69.0 kPa) in order to assess the influence of key environmental factors, such as compaction induced suction and confining pressure, on small-strain stiffness properties of unsaturated soils, such …

Reinforcement Schemes For Cfs Joists Having Web Openings, K. S. Sivakumaran

CCFSS Library (1939 - present)

No abstract provided.

Determination Of Creep Compliance And Tensile Strength Of Hot-Mix Asphalt For Wearing Courses In Missouri, David Newton Richardson, S. M. Lusher

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Creep compliance and indirect tensile (IDT) strength of hot-mix asphalt (HMA) are the two primary inputs to the low-temperature or thermal cracking module in the new Mechanistic-Empirical Pavement Design Guide (M-E PDG) software. Creep compliance is defined as time-dependent strain per unit stress, while IDT strength is best defined as HMA strength when subjected to tension. AASHTO T 322 test protocol was used as reference for this work. However in preparation for the laboratory work performed at the Missouri University of Science and Technology many experts were consulted as to how IDT creep/strength testing and calculations are actually being performed. …

Incorporation Of Space Syntax Theory In Determining Safe And Efficient Construction Site Layout, Minsuck Cho

Masters Theses

Facility layout is an important to determine a proper arrangement of temporary facilities in a construction site. It significantly impacts productivity and safety of construction. The objectives of layout planning are to minimize travel distance and time, to decrease the facility transportation and setup costs, and to improve site safety. Despite the importance of facility layout, it is often overlooked in the planning phase. Several models have been developed taking some of these factors into consideration; however, construction managers and site planners often regard cost as the most important factor in layout planning and pay less attention to safety and …

Parallel Mpi/Fortran Finite Element Symmetrical/Unsymmetrical Domain Decomposition, Siroj Tungkatara

Civil & Environmental Engineering Theses & Dissertations

MPI/FORTRAN finite element analysis software based on Domain Decomposition (DD) formulas has been developed in this work. Efficient input data storage/data communication schemes, domain partitioning, fast symbolical and numerical sparse assembly, symmetrical/unsymmetrical sparse solver and robust symmetrical/unsymmetrical iterative solvers algorithms are all incorporated into the developed code. Parallel Precondition Conjugated Gradient (PCG) and Flexible Generalized Minimum Residual (FGMRES) are developed. Efficient computational techniques used in the developed code are explained. Numerical performance and the accuracy of the developed code are conducted on acoustic examples with medium to large grid sizes. The results obtained from ODU Wilbur cluster (under parallel processing …

Development Of A Stand-Alone Concrete Bridge Pier Protection System, Scott Rosenbaugh, Ronald K. Faller, Jason A. Hascall, Robert W. Bielenberg, Karla A. Polivka, John R. Rohde, Dean L. Sicking, Erin M. Allison

Nebraska Department of Transportation: Research Reports

No abstract provided.

A Study Of Co2 Absorption Using Jet Bubble Column, Setiadi Setiadi, Nita Tania Hadiyani, Hantizen Hantizen, Dijan Supramono

Makara Journal of Technology

A Study of CO2 Absorption Using Jet Bubble Column. The phenomenon of plunging jet gas-liquid contact occurs quite often in nature, it's momentum carries small air bubbles with it into the reactor medium. The momentum of the liquid stream can be sufficient to carry small bubbles completely to the bottom of the vessel. A stream of liquid falling toward a level surface of that liquid will pull the surrounding air along with it. It will indent the surface of the liquid to form a trumpet-like shape. If the velocity of the stream is high enough, air bubbles will be pulled …

Limit States And Load And Resistance Design Of Slopes And Retaining Structures, Dongwook Kim, Rodrigo Salgado

JTRP Technical Reports

Load and Resistance Factor Design (LRFD) methods for slopes and MSE walls were developed based on probability theory. The complexity in developing LRFD for slopes and MSE walls results from the fact that (1) the representation of spatial variability of soil parameters of slopes using Gaussian random field is computationally demanding and (2) LRFD of MSE walls requires examination of multiple ultimate limit states for both external and internal stability checks.

For each design case, a rational framework is developed accounting for different levels of target probability of failure (or target reliability index) based on the importance of the structure. …

Comparison Of Characteristics Between Fatal And Injury Accidents In The Highway Construction Zones, Yingfeng Li, Yong Bai

Civil and Environmental Engineering Faculty Research and Publications

Highway construction zone safety has been a research focus in many countries for many decades. In the United States, regardless of the research efforts devoted, highway construction zones remain a serious safety concern for government agencies, legislatures, the highway industry, and the traveling public. In this study, the fatal and injury accidents between 1992 and 2004 in Kansas highway construction zones were examined systematically and their major characteristics were compared. The results showed significant differences between fatal and injury accidents in the construction zones. The researchers found that: (1) head-on was the dominant type for fatal accidents while rear-end was …

Highway And Street Department Fuel Survey For Indiana Counties, Cities, And Towns, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Publications

The objective of this report is to determine the number of refueling stations available to county highway departments and city and town street departments for their vehicles and equipment. In addition, the type of fuel that each department has at these locations is recorded.

Responses to this survey were received from every county, forty-seven of the fifty highest populated cities, and twelve of the fifteen highest populated towns in Indiana. The data contained within this report is based upon the number of responses received.

The information presented in this report may be used by county highway departments and city and …

Bs News

Building Services Engineering

No abstract provided.

The Development Of Inverter Fuzzy Logic Control For Induction Motor Control By Vector Control Method In Electric Vehicle, Era Purwanto, Mohammad Ashary, Subagio Subagio, Mauridhi Heri Purnomo

Makara Journal of Technology

The development of Inverter Fuzzy Logic Control for Induction Motor Control by Vector Control Method in Electric Vehicle. In response to concerns about energy cost, energy dependence, and environmental damage, a rekindling of interest in electric vehicles (EV’s) has been obvious. Thus, the development of power electronics technology for EV’s will take an accelerated pace to fulfill the market needs, regarding with the problem in this paper is presented development of fuzzy logic inverter in induction motor control for electric vehicle propulsion. The Fuzzy logic inverter is developed in this system to directed toward developing an improved propulsion system for …

Internet Congestion Control System, Pranoto Hidaya Rusmin, Carmadi Machbub, Agung Harsoyo, Hendrawan Hendrawan

Makara Journal of Technology

Internet Congestion Control System. Internet congestion occurs when resource demands exceeds the network capacity. But, it is not the only reason. Congestion can happen on some users because some others user has higher sending rate. Then some users with lower sending rate will experience congestion. This partial congestion is caused by inexactly feedback. At this moment congestion are solved by the involvement of two controlling mechanisms. These mechanisms are flow/congestion control in the TCP source and Active Queue Management (AQM) in the router. AQM will provide feedback to the source a kind of indication for the occurrence of the congestion …

Substrates Preparation From Woody Tropical Waste Biomass For Biohydrogen Production, Dwi Susilaningsih, Theresia Umi Harwati, Khairul Anam, Yopi Yopi

Makara Journal of Technology

Substrates Preparation from Woody Tropical Waste Biomass for Biohydrogen Production. Addressing to the global warming problem, energy crisis and pollution, hydrogen production by micro-organisms using biotechnological approach should be considered, since it fulfils the recent society requirement to safely produce, renewable and environmental friendly energy. Hydrogen is one of the most promising green energy sources, because it is easily converted to electricity and cleanly combustible. There are three types of micro-organisms for hydrogen production, the first is cyanobacteria through the photosynthesis process, the second is anaerobic bacteria, which use organic substances as electron donor and energy and convert them to …

Building Fire Safety Audit At Faculty X, University Of Indonesia, Year 2006, Fatma Lestari, Rm. Yodan Amaral Panindrus

Makara Journal of Technology

Building Fire Safety Audit at Faculty X, University of Indonesia, Year 2006. Fire may cause loss of life, material and valuable assets. The objective of this study is to conduct audit for fire safety and emergency response in the building at Faculty X, University of Indonesia, Depok. The audit results on the building fire safety facilities including emergency response and preparedness are then compared to the Building Code Australia (BCA) and Indonesian regulation on the building fire safety (Kep.MenPU.No 10 and 11/KPTS/2000). The building selected are Building A, B, C, D, F and G. Building classification for A, B, D, …

Ad Hoc On-Demand Distance Vector (Aodv) Routing Protocol Performance Evaluation On Hybrid Ad Hoc Network: Comparison Of Result Of Ns-2 Simulation And Implementation On Testbed Using Pda, Riri Fitri Sari, Abdusy Syarif, Bagio Budiardjo

Makara Journal of Technology

Ad Hoc on-Demand Distance Vector (AODV) Routing Protocol Performance Evaluation on Hybrid Ad Hoc Network: Comparison of Result of Ns-2 Simulation and Implementation on Testbed using PDA. In Mobile Ad hoc NETwork (MANET), node supplemented with wireless equipment has the capacity to manage and organise autonomously, without the presence of network infrastructures. Hybrid ad hoc network, enable several nodes to move freely (mobile) to create instant communication. Independent from infrastructure. They could access the Local Area Network (LAN) or the Internet. Functionalities of ad hoc network very much dependent on the routing protocol that determines the routing around node. Ad …

Biomass Production Chlorella Vulgaris Buitenzorg Using Series Of Bubble Column Photo Bioreactor With A Periodic Illumination, Anondho Wijanarko, Dianursanti Dianursanti, Muryanto Muryanto, Josia Simanjuntak, Praswasti Pembangun Dyah Kencana Wulan, Heri Hermansyah, Misri Gozan, Roekmijati Widaningroem Soemantojo

Makara Journal of Technology

Chlorella vulgaris Buitenzorg cultivation using three bubble column photo bioreactors arranged in series with a volume of 200 mL for 130 hours shows an increase of biomass production of Chlorella vulgaris Buitenzorg up to 1.20 times and a decrease of the ability of CO2 fixation compared to single reactor at a periodic sun illumination cycle. The operation conditions on cultivation are as following: T, 29.0oC; P,1 atm.; UG, 2.40 m/h; CO2, 10%; Benneck medium; and illumination source by Phillip Halogen Lamp 20W /12V/ 50Hz. Other research parameters such as microbial carbon dioxide transferred rate (qco2), CO2 transferred rate (CTR), energy …

The Effect Of Ozone And Zeolite Concentration To The Performance Of The Treatment Of Wastewater Containing Heavy Metal Using Flotation Process, Eva Fathul Karamah, Setijo Bismo, Hotdi M. Simbolon

Makara Journal of Technology

The Effect of Ozone and Zeolite Concentration to the Performance of the Treatment of Wastewater Containing Heavy Metal Using Flotation Process. Industrial wastewater which contains heavy metal cannot be disposed to the environment directly, due to its toxicity. In this research, separation of metal from wastewater was conducted by sorptive flotation method, using Lampung natural zeolite as bonding agent. The most common diffuser used in the flotation process is air or oxygen. In this research, ozone is used as diffuser because it is a stronger oxidant and more dissolvable in water than oxygen. Besides, ozone is a coagulant aid and …

The Role Of 1 And 9 Wt.% Zn In Precipitation Hardening Of Aa319 Aluminium, Bondan Tiara Sofyan, Sari Susanti, Ridwan R. Yusfranto

Makara Journal of Technology

The Role of 1 and 9 wt.% Zn in Precipitation Hardening of AA319 Aluminium. Aluminium alloys are widely used for automotive application due to its low density and high corrosion resistance. For economic reason, casting of automotive products always uses aluminium scrap as charging materials that may result in fluctuation of content of alloying element, such as Zn. This research studies the role of Zn in precipitation hardening of AA319 aluminium alloys. Hardness and tensile testing were conducted to study the mechanical properties of the alloys, while ageing response was followed by hardness measurements. Evolution of microstructures was observed by …

Analysis Of The Shaft Resistance Of Nondisplacement Piles In Sand, D Loukidis, Rodrigo Salgado

Lyles School of Civil Engineering Faculty Publications

The paper examines, using numerical modelling, the problem of the limit shaft resistance of non-displacement piles installed in sands. The modelling makes use of an advanced, two-surface-plasticity constitutive model. The constitutive model predicts the soil response in both the small- and the large-strain range, while taking into account the effects of the intermediate principal effective stress and of the inherent anisotropy of the sand. Finite element analyses of shearing along the pile shaft are performed in order to examine the development of limit unit shaft resistance and the changes in stress state around the shaft upon axial loading of the …