Civil and Environmental Engineering Commons^™

Design Of Zebra Mussel Control Measures For Hydro-Electric Power Projects, G. Inci, C. J. Miller, N. Yesiller

Civil and Environmental Engineering

Zebra mussel, Dreissena polymorpha, is a biofouling organism that lives generally in freshwater ecosystems. Zebra mussel infestation has occurred at various freshwater structures and systems including raw water intakes, industrial and domestic distribution pipelines, and hydropower facilities at its native regions as well as distant locations. A study was conducted to perform risk assessment and to develop preventive measures for zebra mussel infestation at a planned hydroelectric power plant (Alpaslan II HEPP) in southeast Turkey. Zebra mussel is native to Anatolia region and existing hydropower facilities have significantly been affected by mussel infestation. The risk assessment was conducted by …

The Marine Single Assignment Nonstrict Hub Location Problem: Formulations And Experimental Examples, Shang-Hsing Hsieh, Hsien-Lun Wong

Journal of Marine Science and Technology–Taiwan

Marine hub-and-spoke networks have been applied to routing containerships for over two decades, but few papers have devoted their attention to these networks. The marine network problems are known as single assignment nonstrict hub location problems (SNHLPs), which deal with the optimal location of hubs and allocation of spokes to hubs in a network, allowing direct routes between some spokes. In this paper we present a satisfactory approach for solving SHNLPs. The quadratic integer profit programming consists of two-stage computational algorithms: a hub location model and a spoke allocation model. We apply a heuristic scheme based on the shortest distance …

Vibration Of Simply Supported Compound Beams To Moving Loads, Jong-Dar Yau

Journal of Marine Science and Technology–Taiwan

This paper is aimed at investigating the dynamic response of a compound beam subjected to moving loads at high speeds. The compound beam structure is composed of a simple beam and a twomember truss connected by a set of rigid bars at the midpoint of the beam. Based on the nonlinear elastic theory of a symmetric twomember truss under the action of a vertical tip load, and the incremental-iterative solution procedures for solving a nonlinear dynamic system, the dynamic response of the compound beam structure under the excitation of moving loads is studied. According to the numerical results, the nonlinear …

Evaluation Of Development Strategies For Kaohsiung Port Using A Goals Achievement Method, Wen-Chih Huang

Journal of Marine Science and Technology–Taiwan

The Port of Kaohsiung was the third largest container port in the world before 1999, although it dragged to sixth place by 2003. In order to increase the port’s competitiveness, this research outlines six goals and twenty-seven strategies from the viewpoint of international logistics. This research uses the goals achievement measurement for strategic planning effectiveness, and it was undertaken to develop the Goals Achievement Evaluation Model (GAEM) to cope with the problems of a large number of strategies and ambiguity in strategic definition. The GAEM uses a two-stage Delphi questionnaire by simplifying the quantity of responses on the survey. The …

Day 3: Friday, August 6, 2004: Cbm And Unconventional Gas Development, Gary Bryner, Ken Wonstolen

Energy Field Tour 2004 (August 4-6)

19 pages (includes illustrations and maps).

Day 3: Friday, August 6, 2004: Air Quality And Energy Resources, University Of Colorado Boulder. Natural Resources Law Center

Energy Field Tour 2004 (August 4-6)

2 pages (includes illustration).

Day 2: Thursday, August 5, 2004: Valmont Power Plant, Valmont Power Plant

Energy Field Tour 2004 (August 4-6)

5 pages (includes illustrations).

Agenda: Energy Field Tour 2004, University Of Colorado Boulder. Natural Resources Law Center

Energy Field Tour 2004 (August 4-6)

Tour (day trips along the Front Range, originating in Boulder) held August 4-6, 2004.

Summary: Assorted articles, maps, brochures, and other materials prepared for participants of the tour

Contents:

2004 energy field tour agenda -- Mission and vision of the Natural Resources Law Center -- Natural Resources Law Center, University of Colorado School of Law : a brief introduction -- Boulder area street map 4 -- Chatauqua area map -- [Bus] Route 203/225 : Boulder/Lafayette/Baseline -- Boulder-Lafayette via Baseline [bus schedules]

WEDNESDAY, AUGUST 4, 2004: OIL & GAS PRODUCTION FACILITIES AND PLATTEVILLE GAS PROCESSING FACILITY: 'Our next shortage', The Washington …

Day 1: Wednesday, August 4, 2004: Ponnequin Wind Farm, Western Resource Advocates

Energy Field Tour 2004 (August 4-6)

2 pages (includes illustration).

Day 1: Wednesday, August 4, 2004: Calpine Rocky Mountain Energy Center, Calpine Rocky Mountain Energy Center

Energy Field Tour 2004 (August 4-6)

5 pages (includes illustrations).

Wavelenght-Dispersive X-Ray Flourescence Accuration, H. Widyatmoko

Makara Journal of Technology

Wavelenght–Dispersive X-Ray Flourescence Accuration. X-Fuorescence spectrometry is a method, which is increasingly applied in the geochemical analysis. X-Fuorescence spectrometry is classified under two categories – WDXRF (wavelenght – dispersive X-ray fluorescence spectrometer) and EDXRF (energy-dispersive X – ray fluorescence spectrometer). WDXRF can be configured as a sequential spectrometer , a simultaneous spectrometer or a hibrid instrument, which combines the advantages of the simultaneous and sequential spectrometers into one instrument. Each instrument is different in some characteristics, and each has applications for which it is specifically suited. In this investigation sequential spectrometer PW 1450 was used to analyze the major, minor …

Secondary Flow Experimental Study For Axial Compressor Cascade Strong Stagger With And Without Tip- Clearance: Static Pressure Distribution On Blade Surface, Syamsuri Syamsuri

Makara Journal of Technology

Secondary Flow Experimental Study for Axial Compressor Cascade Strong Stagger With and Without Tip- Clearance: Static Pressure Distribution on Blade Surface. The performance of blade cascade is influenced by the growth and boundary layer’s separation along blade surface and endwall (casing and hub). The secondary flow which happens near hub and casing compressors is three dimentional flow separation phenomenon comes from interaction blade boundary layer with casing and hub boundary layers in the compressor. The secondary flow causes secondary losses, blockage effect, and turning angle (deflection) distribution along blade span. The result of the research shows that the increase of …

Effect Of Photoperiodicity On Co2 Fixation By Chlorella Vulgaris Buitenzorg In Bubble Column Photobioreactor For Food Supplement Production, Anondho Wijanarko, Dianursanti Dianursanti, Arief Budi Witarto, Roekmijati Widaningroem Soemantojo

Makara Journal of Technology

To reduce the level of CO2 content in air, effort on converting CO2 to useful products is required. One of the alternatives includes CO2 fixation to produce biomass using Chlorella vulgaris Buitenzorg. Chlorella vulgaris Buitenzorg is applied for production of food supplement. Chlorella vulgaris Buitenzorg is also easy to handle due to its superior adaptation. Currently, Chlorella vulgaris Buitenzorg has been analyzed by some experts for its cellular composition, its ability to produce high quality biomass and the content of essential nutrition. A series of experiments was conducted by culturing Chlorella vulgaris Buitenzorg using Beneck medium in bubbling column photobioreactor. …

Synthesize Of Emulsion Polymer Latex For Sub-Grade Cbr Improvement In The Road Construction, Keba Moto, V. Julian, Syamsudin Syamsudin, T. A. Wiradi, S. R. Wijaya

Makara Journal of Technology

Synthesize of emulsion polymer latex for sub-grade CBR improvement in the road construction. Latex polymer for California Bearing Ratio (CBR) enhancement in sub-grade soil of road building has been prepared by emulsion polymerizations technique. The prepared polymer then characterize by Fourier Transform Infrared (FTIR). For application purpose, CBR test was done to the compacted polymer added-soil. The CBR test is done also for both soaked and unsoaked samples. It is found that our latex polymer is better then other imported latex polymer. For the latex polymer, which is design to have Temperatur glass (Tg) around 9.8-19.6o, indicating the formation of …

Ccfss Technical Bulletin Fall 2004, Wei-Wen Yu Center For Cold-Formed Steel Structures

CCFSS Technical Bulletins (1993 - 2020)

No abstract provided.

Geotechnical Reconnaissance Of The 2002 Denali Fault, Alaska, Earthquake, Robert E. Kayen, Eric Thompson, Diane Minasian, Robb E.S. Moss, Brian D. Collins, Nicholas Sitar, Douglas Dreger, Gary Carver

Civil and Environmental Engineering

The 2002 M7.9 Denali fault earthquake resulted in 340 km of ruptures along three separate faults, causing widespread liquefaction in the fluvial deposits of the alpine valleys of the Alaska Range and eastern lowlands of the Tanana River. Areas affected by liquefaction are largely confined to Holocene alluvial deposits, man-made embankments, and backfills. Liquefaction damage, sparse surrounding the fault rupture in the western region, was abundant and severe on the eastern rivers: the Robertson, Slana, Tok, Chisana, Nabesna and Tanana Rivers. Synthetic seismograms from a kinematic source model suggest that the eastern region of the rupture zone had elevated strong-motion …

Evaluation Of A Modified Mpa Procedure Assuming Higher Modes As Elastic To Estimate Seismic Demands, Anil K. Chopra, Rakesh K. Goel, Chatpan Chintanapakdee

Civil and Environmental Engineering

The modal pushover analysis (MPA) procedure, which includes the contributions of all significant modes of vibration, estimates seismic demands much more accurately than current pushover procedures used in structural engineering practice. Outlined in this paper is a modified MPA (MMPA) procedure wherein the response contributions of higher vibration modes are computed by assuming the building to be linearly elastic, thus reducing the computational effort. After outlining such a modified procedure, its accuracy is evaluated for a variety of frame buildings and ground motion ensembles. Although it is not necessarily more accurate than the MPA procedure, the MMPA procedure is an …

Calibration, Verification And Sensitivity Analysis Of The Hec-Hms Hydrologic Model, Juraj Cunderlik, Slobodan P. Simonovic

Water Resources Research Report

The main objective of this report is to describe the calibration, verification, and sensitivity analysis of the United States Army Corps of Engineers (USACE) Hydrologic Engineering Center’s Hydrologic Modeling System (HEC-HMS) on the data from the Upper Thames River basin (UTRb) study area. The HEC-HMS model was chosen to be the most appropriate hydrologic modeling tool for achieving the goals set in the Canadian Foundation for Climatic and Atmospheric Sciences (CFCAS) funded project “Assessment of Water Resources Risk and Vulnerability to Changing Climatic Conditions” (“project” hereafter), (Cunderlik and Simonovic, 2003). The calibration, verification and sensitivity analysis of the HMS model …

Ccfss News Fall 2004, Wei-Wen Yu Center For Cold-Formed Steel Structures

CCFSS Newsletters (1999 - 2008)

No abstract provided.

Inspection And Evaluation Of A Bridge Deck Partially Reinforced With Gfrp Rebars, Issam E. Harik, P. Alagusundaramoorthy, V. Gupta, Chris Hill, Choo Ching Chiaw

Kentucky Transportation Center Research Report

The corrosion of steel can be a significant problem in bridge decks in which the reinforcing and prestressing steel are accessible to deicing salts and combinations of moisture, temperature and chlorides through cracks, leading to concrete deterioration and loss of serviceability. Fiber Reinforced Polymer (FRP) rebars have emerged as one alternative to steel reinforcement in corrosive environments.

The objective of this study is to evaluate the cracks formed on a bridge deck that is partially reinforced with glass fiber reinforced polymer (GFRP) rebars. The bridge constructed in 1997 is in Bourbon County, KY, on US460 over the Rogers' Creek. Its …

Developing An Intelligent Transportation Systems (Its) Architecture For The Kipda Region, Joseph D. Crabtree, Jennifer R. Walton

Kentucky Transportation Center Research Report

This report describes the development of a regional Intelligent Transportation Systems (ITS) Architecture for the five-county urban area under the auspices of the Kentuckiana Regional Planning and Development Agency (KIPDA). The architecture development process included the following steps: (1) Preliminary Architecture Work; (2) Inventory of Existing and Planned Projects; (3) Assessment of Regional Needs; (4) Development of Preliminary Architecture; (5) Review and Revision of Architecture; and (6) Delivery of Final Architecture and Documentation. Principal tools used in the development included the National ITS Architecture (version 4.0) and the Turbo Architecture software (version 2.0). Deliverables included the architecture database (created using …

Evaluation Of The Service Performance Of Bridge Components, Theodore Hopwood Ii, Robert Brown

Kentucky Transportation Center Research Report

This study was initiated to provide review of common bridges to determine the performance of their components. Seven bridge types were selected that constituted 85 % of the Kentucky Transportation Cabinet (KYTC) bridge inventory. 319 bridges were inspected by Kentucky Transportation Cabinet (KTC) researchers, representing 5 about % of those bridges. Common details/components were identified and evaluated including features of interest to the KYTC Study Advisory Committee. In addition to those findings, KTC researchers evaluated KYTC National Bridge Inventory reports and maintenance needs forms for the same bridges.

Design modifications/material changes were recommended to improve performance of new bridges. Additionally, …

2004 Safety Belt Usage Survey In Kentucky, Kenneth R. Agent, Eric R. Green

Kentucky Transportation Center Research Report

The objective of this study was to establish 2004 safety belt and child safety seat usage rates in Kentucky. The 2004 survey continues to document the results after enactment of a statewide mandatory safety belt law in 1994 and safety belt enforcement campaign. Data were collected at 200 randomly selected sites spread across Kentucky. Data from the individual sites were combined into a statewide percentage considering roadway functional classification, geographic region, and vehicle miles traveled.

The data show that the usage rate in 2004 (66.0 percent) was slightly higher than that in 2003 (65.5 percent). This compared to 62.0 percent …

Optimization And Standardization Of Pavement Management Processes, David L. Allen, Yuhong Wang

Kentucky Transportation Center Research Report

This report addresses issues related to optimization and standardization of current pavement management processes in Kentucky. Historical pavement management records were analyzed, which indicates that standardization is necessary in future pavement management decisions. Based on data patterns from Kentucky’s interstate and parkway systems, two distress threshold values and three stages of pavement distress development were defined in this research. Also, staged survival models were developed in this research to predict the duration of a pavement in each stage. These duration models can assist the agency in optimizing design strategies and conducting life-cycle cost analysis.

Conformal Refinement Of All-Hexahedral Finite Element Meshes, Nathan Harris

Theses and Dissertations

Mesh adaptation techniques are used to modify complex finite element meshes to reduce analysis time and improve accuracy. Modification of all-hexahedral meshes has proven difficult to the unique connectivity constraints they exhibit. This thesis presents an automated tool for local, conformal refinement of all-hexahedral meshes based on the insertion of multi-directional twist planes into the spatial twist continuum. The contributions of this thesis are (1) the ability to conformally refine all entities of an all-hexahedral element mesh, (2) the simplification of template insertion to multi-directional refinement. The refinement algorithm is divided into single hex sheet operations, where individual refinement steps …

Bs News

Building Services Engineering

No abstract provided.

Determination Of Traffic Responsive Plan Selection Factors And Thresholds Using Artificial Neural Networks, Anuj Sharma

Department of Civil and Environmental Engineering: Faculty Publications

Traffic congestion has become a menace to civilized society. It degrades air quality, jeopardizes safety and causes delay. Traffic congestion can be alleviated by providing an effective traffic control signal system. Closed-loop traffic control systems are an example of such a system.

Closed-loop traffic control systems can be operated primarily in either of two modes: Time of Day Mode (TOD) or Traffic Responsive Plan Selection Mode (TRPS). TRPS mode, if properly configured, can easily handle time independent variation in traffic volumes. It can also reduce the effect of timing plan aging. Despite these advantages, TRPS mode is not used as …

Willamette River Basin Temperature Tmdl Model: Model Calibration, Chris Berger, Michael Lee Mckillip, Robert Leslie Annear, Sher Jamal Khan, Scott A. Wells

Civil and Environmental Engineering Faculty Publications and Presentations

The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and …

2004 Directory Of Indiana State, County, City And Town Officials Responsible For Road And Street Work, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Directory

Contact information for agency officials and employees responsible for Indiana’s local road infrastructure.

A Modal Pushover Analysis Procedure To Estimate Seismic Demands For Unsymmetric-Plan Buildings, Anil K. Chopra, Rakesh K. Goel

Civil and Environmental Engineering

An Erratum has been published for this article in Earthquake Engng. Struct. Dyn. 2004; 33:1429.

Based on structural dynamics theory, the modal pushover analysis (MPA) procedure retains the conceptual simplicity of current procedures with invariant force distribution, now common in structural engineering practice. The MPA procedure for estimating seismic demands is extended to unsymmetric‐plan buildings. In the MPA procedure, the seismic demand due to individual terms in the modal expansion of the effective earthquake forces is determined by non‐linear static analysis using the inertia force distribution for each mode, which for unsymmetric buildings includes two lateral forces and torque at …