Civil and Environmental Engineering Commons^™

Integration Of Remote Sensing And Proximal Sensing For Improvement Of Field Scale Water Management, Foad Foolad

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Water is one of the most precious natural resources, and sustainable water resources development ‎‎is a significant challenge facing water managers over the coming decades. Accurate estimation of ‎‎the different components of the hydrologic cycle is key for water managers and planners in order ‎‎to achieve sustainable water resources development. The primary goal of this dissertation was to ‎investigate techniques to combine datasets acquired by remote and proximal sensing and in-situ ‎sensors for the improvement of monitoring near surface water fluxes. This dissertation is ‎separated into three site-specific case studies. First study, investigated the feasibility of using ‎inverse vadose zone …

U.S. Agro-Climate In 20th Century: Growing Degree Days, First And Last Frost, Growing Season Length, And Impacts On Crop Yields, Meetpal Singh Kukal, Suat Irmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Significant air temperature changes have occurred globally during the 20th century, which are spatially variable to a considerable degree and these changes can have substantial implications in agroecosystem productivity. The agroclimate indicators that are responsible in these contexts are first fall frost (FFF), last spring frost (LSF), climatological growing season (CGS) length, and heat accumulation (growing degree days, GDD). We explore spatial and temporal trends associated with these indices across the continental U.S. (CONUS) during 1900–2014 using datasets collected at 1218 sites. On average, FFF has been occurring later (by 5.4 days century⁻¹), and LSF has been occurring …

Adam J. Liska: Curriculum Vitae, Adam Liska

Adam Liska Papers

Associate Professor, George Dempster Smith Chair of Industrial Ecology, Departments of Biological Systems Engineering and Agronomy & Horticulture, University of Nebraska-Lincoln 236 L.W. Chase Hall, Lincoln, NE 68583-0726, Ph: (402) 472-8744, e-mail: [email protected]

Ph.D. 2003 Biology (magna cum laude), Max Planck Institute of Molecular Cell Biology & Genetics, Technische Universität Dresden, Dresden, Germany

Finite Element Modeling And Updating Of A Five-Tiered Pagoda Style Temple, Linh Maytham Abdulrahman

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Historical pagoda style temples demonstrate different dynamic behavior than traditional unreinforced masonry (URM) structures due to the unique construction practices and ornate architectural detailing. Recently, the 2015 Gorkha M_w 7.8 earthquake resulted in widespread structural damage and collapse of similar historic temples in Nepal. However, one temple did not collapse. This is the five-tiered pagoda style Nyatapola temple built in 1702 and located in Bhaktapur, Nepal. Understanding the seismic vulnerability and structural behavior of these pagoda-style temples can lead to more efficient retrofit solutions and conservation practices for similar heritage structures.

This study developed and calibrated the pre- and …

Road Weather Impact Based Decision Support Applications: Developing A Department Of Transportation Winter Severity Index, Curtis Louis Walker

Department of Earth and Atmospheric Sciences: Dissertations, Theses, and Student Research

Adverse weather conditions are responsible for millions of vehicular crashes, thousands of vehicular deaths and billions of dollars in economic and congestion costs. Many transportation agencies utilize a performance or mobility metric to assess how well they are maintaining road access. This research focuses on the development of a winter severity index for the State of Nebraska (NEWINS). NEWINS is an event-driven index that was derived for the Nebraska Department of Transportation (NDOT) and its districts across the state. The NEWINS framework includes a categorical storm classification framework and climatological aspect to capture atmospheric conditions more accurately across diverse spatial …

A Study On Residential Construction Energy Code Compliance In Nebraska, Aaron Thompson

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Energy codes are easy to implement, but how effectively are they being followed? To determine energy code compliance of residential construction in Nebraska, a study was conducted in which seven key areas having the most effect on energy savings were analyzed. The study examined both urban and rural areas of the state and compared Nebraska to other states’ energy code compliance studies. The study found an eighty-eight percent average compliance in the key areas. Urban areas tended to be more compliant than rural areas. Nebraska is comparative in energy code compliance to other states. Yet, the state of Nebraska, code …

New Mixture Additives For Sustainable Bituminous Pavements, Gabriel Mukristu Nsengiyumva, Kommidi Santosh, Yong-Rak Kim, Helan Xu, Yiqi Yang

Nebraska Department of Transportation: Research Reports

In an effort to improve mechanical properties of asphalt concrete, an exploratory research using mixture additives was attempted. Two different types of additives on two material scales were used: asphalt concrete (AC) level and binder level. At the start of this study, the effect of natural cornhusk fibers on the resistance of two types of AC mixtures on cracking were tested for hot-mix asphalt (HMA) and cold-mix asphalt (CMA). The results showed slight improvements in cracking resistance in cornhusk reinforced HMA, and in the case of the CMA, marshal flow. Overall, based on the test results, cornhusk-reinforced HMA and CMA …

Road Diet Feasibility Analysis For Nebraska, Brandon L. Purintun

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Many rural towns and cities throughout Nebraska have experienced consistent population decline over the past 50 years, and the highway system once built to accommodate hoped-for growth is not serving the population as well as it could. These towns and cities would benefit from implementing a road diet conversion on their main highways. Within rural communities, road diets are an increasingly popular method of improving safety along major arterials through the reduction of excess capacity in favor of increasing refuge areas for turning vehicles. A typical application might be the restriping of a four-lane undivided highway into a three-lane highway …

Examination Of Steel Pin And Hanger Assembly Performance: Retrofit To Replacement, Chandana Chickamagalur Balakrishna

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

A number of steel, multi-beam bridges exist in the United States that contain pin and hanger assemblies. Pin and hanger assemblies are fracture critical members whose failure would result in collapse of the bridge or render it unable to perform its expected functions. As these bridges continue to age, many assemblies have deteriorated to a point where retrofit or replacement has to be considered and performed to maintain intended safety and performance. States have taken various approaches to address the pin and hanger assembly retrofit and replacement options. However, there is no single document that summarizes these approaches.

This research …

Optimized Health Monitoring Plans For A Steel, Double-Track Railway Bridge, Ahmed Rageh

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Railway bridges are an essential component of any modern society and play a significant transportation role. During the 19^th and early 20^th centuries steel truss and plate girder bridges were commonly used railway designs, with most of the trusses constructed using pin and eyebar systems and most other load carrying members being riveted, built-up sections.

Many of these bridges are still in use and are subjected to increased railway traffic intensity, loads and speeds. The current practice for evaluating the integrity of bridges in the United States, irrespective of use, is primarily via visual inspection, with those inspections …

Wetland Conservation Effects Result In Enhanced Playa Functionality In The Rainwater Basin, Nebraska, Hong Zhang

Community and Regional Planning Program: Theses

This study assessed the functionality level of wetland hydrology, hydrophyte and soil conditions, and then identified the restorable potential of conserved playas. The distribution of hydrology and hydrophyte were geospatially examined through annual tracking the quantity and quality of wetlands on historical hydric soil footprints under different conservation programs in the Rainwater Basin (RWB) in Nebraska, USA during 2004-2015. The results show that the historical hydric soil footprints with the conservation programs had significantly higher functionality of ponded water and hydrophyte than non-conserved wetlands. The yearly average of ponded water areas within footprints varies at 12.59% for the Waterfowl Production …

Mechanical Characterization Of Polysilicon Mems: A Hybrid Tmcmc/Pod-Kriging Approach, Ramin Mirzazadeh, Saeed Eftekhar Azam, Stefano Mariani

Department of Civil and Environmental Engineering: Faculty Publications

Microscale uncertainties related to the geometry and morphology of polycrystalline silicon films, constituting the movable structures of micro electro-mechanical systems (MEMS), were investigated through a joint numerical/experimental approach. An on-chip testing device was designed and fabricated to deform a compliant polysilicon beam. In previous studies, we showed that the scattering in the input–output characteristics of the device can be properly described only if statistical features related to the morphology of the columnar polysilicon film and to the etching process adopted to release the movable structure are taken into account. In this work, a high fidelity finite element model of the …

A Review Of The Seismic Isolation Design Procedure, Francisco Garcia

Honors Program: Senior Projects (Public)

The current design procedure for seismic isolation bearings for bridges is a simplified method that assigns the bearings with an elastic stiffness. Bridges subjected to ground motions actually act in a hysteric, nonlinear fashion when force is plotted against displacement. The goal of this research was to gain further insight as to whether simplifying seismic isolation bearings to a simplified stiffness is adequate or not. Design procedures were followed in the modeling of a bridge with seismic isolation. Linear modal time history analyses and with nonlinear direct integration time history analyses of ground motions were compared. At the conclusion of …

Rainwater Harvesting System Scenario Analysis On Runoff Reduction Potential In Surabaya, Indonesia: A Geospatial Analysis For Brantas Hilir Watershed, Putri Sukmahartati

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Global warming has become an environmental concern over the past several decades and its impact on the water cycle is very crucial to the well-being of the human population. In the hydrological cycle, water evaporates by the heat of the sun and atmosphere, where it is accumulated in the atmosphere via clouds and it then falls as rain. With warmer temperatures, more intensive evaporation and downpours occur. In addition, impervious surfaces are increasing as a result of urban development. Those surfaces cause more water to flow faster into open water bodies, creating more extensive flooding, and additionally reducing water quality. …

Imidacloprid Sorption And Transport In Cropland, Grass Buffer, And Riparian Buffer Soils, Laura E. Satkowski, Keith W. Goyne, Stephen H. Anderson, Robert N. Lerch, Elisabeth B. Webb, Daniel D. Snow

Daugherty Water for Food Global Institute: Faculty Publications

An understanding of neonicotinoid sorption and transport in soil is critical for determining and mitigating environmental risk associated with the most widely used class of insecticides. The objective of this study was to evaluate mobility and transport of the neonicotinoid imidacloprid (ICD) in soils collected from cropland, grass vegetative buffer strip (VBS), and riparian VBS soils. Soils were collected at six randomly chosen sites within grids that encompassed all three land uses. Single-point equilibrium batch sorption experiments were conducted using radio-labeled (¹⁴C) ICD to determine solid–solution partition coefficients (K_d). Column experiments were conducted using soils collected …

Multi-Point Vibration Measurement And Mode Magnification Of Civil Structures Using Video-Based Motion Processing, Zhexiong Shang, Zhigang Shen

Department of Construction Engineering and Management: Faculty Publications

Image-based vibration measurement has gained increased attentions in civil and construction communities. A recent video-based motion magnification method was developed to measure and visualize small structure motions. This new approach presents a potential for low-cost vibration measurement and mode shape identification. Pilot studies using this approach on simple rigid body structures were reported. Its validity on complex outdoor structures has not been investigated. In this study, a non-contact video-based approach for multi-point vibration measurement and mode magnification is introduced. The proposed approach can output a full-field vibration map that increases the efficiency of the current structural health monitoring (SHM) practice. …

Evaluation Of A Hybrid Reflectance-Based Crop Coefficient And Energy Balance Evapotranspiration Model For Irrigation Management, J. Burdette Barker, Christopher M. U. Neale, Derek M. Heeren, Andrew E. Suyker

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Accurate generation of spatial soil water maps is useful for many types of irrigation management. A hybrid remote sensing evapotranspiration (ET) model combining reflectance-based basal crop coefficients (K_cbrf) and a two-source energy balance (TSEB) model was modified and validated for use in real-time irrigation management. We modeled spatial ET for maize and soybean fields in eastern Nebraska for the 2011-2013 growing seasons. We used Landsat 5, 7, and 8 imagery as remote sensing inputs. In the TSEB, we used the Priestly-Taylor (PT) approximation for canopy latent heat flux, as in the original model formulations. We also used the …

Structural Identification And Assessment Of The Inverted Tee Girder Bridge System, Garrett P. D. Martindale

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The Inverted Tee (IT) girder bridge system was originally developed in 1996 by the University of Nebraska–Lincoln (UNL) and Nebraska Department of Roads (NDOR) engineers. This bridge system currently accounts for over 110 bridges in Nebraska used for both state highways and local county roads. Excessive transverse and longitudinal deck cracking has been observed and noted in numerous bridge inspection reports. Since the IT girder bridge system is relatively new, limited data and knowledge exist on its structural performance and behavior. This study evaluates the IT girder bridge system by conducting twenty field observations as well as recording accelerometer time …

Mash Test No. 3-10 Of A Non-Proprietary, High-Tension, Cable Median Barrier For Use In 6h:1v V-Ditch (Test No. Mwp-9), Mojdeh Asadollahi Pajouh, Karla A. Lechtenberg, Ronald K. Faller, James C. Holloway, Robert W. Bielenberg, Scott K. Rosenbaugh

Nebraska Department of Transportation: Research Reports

The Midwest Pooled Fund Program has been developing a prototype design for a non-proprietary, high-tension, cable median barrier for use in a 6H:1V median V-ditch. This system incorporates four evenly spaced cables, Midwest Weak Posts (MWPs) spaced at 8 to 16 ft (2.4 to 4.9 m) intervals, and a bolted, tabbed bracket to attach the cables to each post. Full-scale crash testing was needed to evaluate the barrier’s safety performance. According to the Manual for Assessing Safety Hardware 2016 (MASH) testing matrix for cable barriers installed within a 6H:1V median V-ditch, a series of eight full-scale crash tests are required …

Phase Ii Evaluation Of Floor Pan Tearing For Cable Barrier Systems, Dylan T. Meyer, Mojdeh Asadollahi Pajouh, Karla A. Lechtenberg, Ronald K. Faller, Robert W. Bielenberg, James C. Holloway

Nebraska Department of Transportation: Research Reports

The objective of this research effort was to mitigate the potential for floor pan tearing and penetration into the occupant compartment by modifying the posts utilized in a prototype cable barrier system. A series of dynamic component tests were conducted on the modified Midwest Weak Post (MWP). A bogie vehicle was equipped with a simulated floor pan designed to replicate the height, thickness, and strength of the floor pan of a Kia Rio. Two methods of post modification were investigated, including edge protection on the top of the MWP as well as weakening of the MWP at the ground line. …

High-Resolution Water Footprints Of Production Of The United States

Daugherty Water for Food Global Institute: Faculty Publications

The United States is the largest producer of goods and services in the world. Rainfall, surface water supplies, and groundwater aquifers represent a fundamental input to economic production. Despite the importance of water resources to economic activity, we do not have consistent information on water use for specific locations and economic sectors. A national, spatially detailed database of water use by sector would provide insight into U.S. utilization and dependence on water resources for economic production. To this end, we calculate the water footprint of over 500 food, energy, mining, services, and manufacturing industries and goods produced in the United …

Piezocone Penetration Testing Device, Chung R. Song, Benyam M. Bekele, Brian Sawyer

Nebraska Department of Transportation: Research Reports

Hydraulic characteristics of soils can be estimated from piezocone penetration test (called PCPT

hereinafter) by performing dissipation test or on-the-fly using advanced analytical techniques. This

research report presents a method for fast estimation of hydraulic conductivity of overconsolidated soils

based on the piezocone penetration test. The method relies on an existing relationship developed for the

determination of hydraulic conductivity of normally consolidated soils on-the-fly. The present research

revises this relationship so that it can be applied for overconsolidated soils by incorporating a proper

correction equation. The revised relationship provides a pore pressure representing the hydraulic

conductivity of a hypothetical “equivalent …

Climate-Driven Crop Yield And Yield Variability And Climate Change Impacts On The U.S. Great Plains Agricultural Production, Meetpal Singh Kukal, Suat Irmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Climate variability and trends affect global crop yields and are characterized as highly dependent on location, crop type, and irrigation. U.S. Great Plains, due to its significance in national food production, evident climate variability, and extensive irrigation is an ideal region of investigation for climate impacts on food production. This paper evaluates climate impacts on maize, sorghum, and soybean yields and effect of irrigation for individual counties in this region by employing extensive crop yield and climate datasets from 1968–2013. Variability in crop yields was a quarter of the regional average yields, with a quarter of this variability explained by …

Hot Applied Sealant Bond Test For Joints With Penetrating Sealers, Lieska Halsey

Nebraska Department of Transportation: Research Reports

Recently a concern has been raised for hot applied sealant bond for joints with penetrating sealers. The objective of this study will be to determine if the bond between the sealant and the concrete is compromised by the sealer currently approved to be used in Nebraska. The expected results will be that the bond is not compromised and is serving for the expected joint service life.

Systematic Approach To Identifying Deeply Buried Archeological Deposits, Anthony L. Layzell, Rolfe D. Mandel, Courtney L. Ziska, John R. Bozell

Nebraska Department of Transportation: Research Reports

This project is designed to assist cultural resource specialists involved in Nebraska Department of Transportation (NDOT) and the Federal Highway Administration (FHWA) project planning and development. The goal was to develop Geographic Information System (GIS) data layers that spatially delineate different landform-sediment assemblages (LSAs) and depict the associated geologic potential for buried cultural deposits in select watersheds in Nebraska. The Nebraska Buried Sites GIS resource will allow planners and cultural resource specialists to determine whether future project areas are likely to be free of deeply buried sites or whether subsurface exploration is necessary.

Compressive Strength Of Concrete Cylinders By Different Preparation Methods: Sulphur, Neoprene Pads And Grinding, Wally Heyen, Lieska Halsey

Nebraska Department of Transportation: Research Reports

The purpose of this evaluation is to compare the effects of four types of cylinder preparation methods prior to compressive strength testing in accordance to ASTM C 39.

Corrosive Strength Of Concrete Cylinders By Different Preparation Methods: Sulphur, Neoprene Pads And Grinding, Wally Heyen, Lieska Halsey, Tim Krason

Nebraska Department of Transportation: Research Reports

The purpose of this evaluation is to compare the effects of four types of cylinder preparation methods prior to compressive strength testing in accordance to ASTM C 39.

Global Anthropogenic Phosphorus Loads To Freshwater And Associated Grey Water Footprints And Water Pollution Levels: A High-Resolution Global Study, Mesfin Mekonnen, Arjen Y. Hoekstra

Daugherty Water for Food Global Institute: Faculty Publications

We estimate the global anthropogenic phosphorus (P) loads to freshwater and the associated grey water footprints (GWFs) for the period 2002–2010, at a spatial resolution of 5 3 5 arc min, and com- pare the GWF per river basin to runoff to assess the P-related water pollution level (WPL). The global anthro- pogenic P load to freshwater systems from both diffuse and point sources is estimated at 1.5 Tg/yr. More than half of this total load was in Asia, followed by Europe (19%) and Latin America and the Caribbean (13%). The domestic sector contributed 54% to the total, agriculture 38%, …

Riverbank Filtration Impacts On Post Disinfection Water Quality In Small Systems—A Case Study From Auburn And Nebraska City, Nebraska, Matteo D'Alessio, Bruce Dvorak, Chittaranjan Ray

Nebraska Water Center: Faculty Publications

Small water systems can experience a fluctuating quality of water in the distribution system after disinfection. As chlorine is the most common disinfectant for small systems, the occurrence of disinfection byproducts (DBPs) represents a common problem for these systems. Riverbank filtration (RBF) can be a valuable solution for small communities located on riverbanks. The objectives of this study were to evaluate (i) the improvements in water quality at two selected RBF systems, and (ii) the potential lower concentrations of DBPs, in particular, trihalomethanes (THMs), in small systems that use RBF. Two small communities in Nebraska, Auburn and Nebraska City, using …

Flow Analysis Through Collector Well Laterals: A Case Study From Sonoma County Water Agency, California, Matteo D'Alessio, John Lucio, Ernest Williams, James Warner, Donald Seymour, Jay Jasperse, Chittaranjan Ray

Nebraska Water Center: Faculty Publications

The Sonoma County Water Agency (SWCA) uses six radial collector wells along the Russian River west of Santa Rosa, to provide water for several municipalities and water districts in north-western California. Three collector wells (1, 2, and 6) are located in the Wohler area, and three collector wells (3, 4, and 5) are located in the Mirabel area. The objective of this paper is to highlight the performance of the three collector wells located in the Mirabel area since their construction. The 2015 investigation showed a lower performance of Collectors 3 and 4 compared to their original performances after construction …