Civil and Environmental Engineering Commons^™

The Use Of Novel Non-Destructive Methods For Quality Control And Performance Evaluation Of Concrete Structures, Sree Nanukuttan, Niall Holmes, Sudarsan Srininvasan, Lulu Basheer, Muhammed Basheer, John Mccarter, Gerry Starrs

Conference papers

Concrete cover provides the first line of defense against the ingress of many deleterious substances into the concrete. Therefore, a measure of its transport properties is vital in assessing its long term performance in a given exposure condition. In new structures the rate of ingress of the deleterious substances could be monitored using array of electrical sensors that are embedded in the cover concrete. For structures that are currently in service, tests can be performed by removing cores from the structure (lab based tests) or by using tests that can be performed on the surface (in situ tests). Results relating …

Social Enterprise: An Overlooked Approach To Promoting Sustainable Economic Regeneration, Gerard Doyle

Reports

Across Europe, social enterprises are making a significant impact on communities, particularly those blighted by high levels of unemployment, poverty and disadvantage. According to the European Commission, they represent 2 million enterprises (i.e. 10 per cent of all European businesses) and employ over 11 million paid employees (the equivalent of 6 per cent of the working population of the EU). Social enterprises are present in almost every sector of the economy, such as banking, insurance, agriculture, craft, various commercial services, and health and social services. The benefits of social enterprises are many, but in economic terms, they can support the …

Cloud Computing And Its Application In The Irish Construction Industry, Alan V. Hore, Roger West, Alan Redmond

Conference papers

The significance of Irish Small to Medium Size Enterprises (SMEs) being more effective and efficient with eBusiness solutions in the construction industry has never been more evident than in today’s global economy. Through the development of a strong and proactive network the Construction IT Alliance (CITA) hope to create a platform for implementing the use of eBusiness in the SME community. This network will provide SME companies with a direction on how to improve their efficiency and effectiveness through the use of technology. At present CITA has identified a potential business solution that would make construction software more accessible by …

Comparison Of Indian Ppp Construction Industry And European Ppp Construction Industry: Process, Thresholds And Implementation, Louis Gunnigan, Renuka Rajput

Conference papers

Abstract Since the 1990’s, there has been a rapid rise of Public Private Partnerships (PPPs) across the world. Governments in developing as well as developed countries are increasingly using this procurement method to bridge the much needed infrastructure gap. PPPs are seen as an important tool for producing an accelerated and larger pipeline of infrastructure investments, and catching up with the infrastructure deficit. Arguably, this is why developed and especially developing countries are very keen on PPP models. This paper will compare the PPP procurement process followed in Europe compared to India and presents a thorough review of literature on …

Developments In Monitoring Techniques For Durability Assessment Of Cover-Zone Concrete, W.J. Mccarter, T. M. Chrisp, G. Starrs, Niall Holmes, L. Basheer, M. Basheer, S. V. Nanukuttan

Conference papers

This paper outlines developments in the use of an embedded multi-electrode sensor to study the response of the cover-zone (surface 50mm) to the changing ambient environment. The sensor enables the measurement of the spatial and temporal distribution of the electrical properties of concrete and temperature within the cover-zone thereby allowing an integrated assessment of cover-zone concrete performance. Both laboratory and field results are presented to highlight the information that can be obtained from embedded sensors. When exposed to the natural environment, the temperature dependence of the electrical response is highlighted and standardization protocols are developed to account for this effect. …

Site Specific Modelling Of Traffic Loading On Highway Bridges, Bernard Enright, Eugene J. Obrien

Conference papers

Accurate traffic loading models based on measured weigh-in-motion (WIM) data are essential for the accurate assessment of existing bridges. Much work has been published on the Monte Carlo simulation of single lanes of heavy vehicle traffic, and this can easily be extended to model the loading on bridges with two streams of traffic in opposing directions. However, a typical highway bridge will have multiple lanes in the same direction, and various types of correlation are evident in measured traffic, such as groups of very heavy vehicles travelling together and heavy vehicles being overtaken by lighter ones. These traffic patterns affect …

Development Of A Cloud Solution For Smes In The Irish Construction Industry, Alan V. Hore, Alan Redmond, Roger West

Conference papers

There is a strong emerging trend within the Information Communication Technology (ICT) sector for replacing traditional packaged desktop applications with Web based, outsourced products and services. The drive for this innovative solution is its contribution to enabling software to be developed, delivered and consumed in discrete chunks (known as services) liberating the users from traditional computing and providing services accessible across a range of devices and appliances. The objective of this paper is to report on the progress towards defining this Web based service, commonly known as ‘Cloud computing’, for Small to Medium Size Enterprises (SMEs) in the Irish construction …

Characteristic Dynamic Increment For Extreme Traffic Loading Events On Short And Medium Span Highway Bridges, Eugene J. Obrien, Daniel Cantero, Bernard Enright, Arturo González

Articles

More accurate assessment of safety can prevent unnecessary repair or replacement of existing bridges which in turn can result in great cost savings at network level. The allowance for dynamics is a significant component of traffic loading in many bridges and is often unnecessarily conservative. Critical traffic loading scenarios are considered in this paper with a model that allows for vehicle-bridge interaction and takes into account the road surface condition. Characteristic dynamic allowance values are presented for the assessment of mid-span bending moment in a wide range of short to medium span bridges for bi-directional traffic.

Importance Of The Tail In Truck Weight Modeling For Bridge Assessment, Eugene J. Obrien, Bernard Enright, Abraham Getachew

Articles

To predict characteristic extreme traffic load effects, simulations are sometimes performed of bridge loading events. To generalize the truck weight data, statistical distributions are fitted to histograms of weight measurements. This paper is based on extensive WIM measurements from two European sites and shows the sensitivity of the characteristic traffic load effects to the fitting process. A semi-parametric fitting procedure is proposed: direct use of the measured histogram where there are sufficient data for this to be reliable and parametric fitting to a statistical distribution in the tail region where there are less data. Calculated characteristic load effects are shown …

Estimating The Characteristic Vertical Response Of A Flexible Footbridge Due To Crowd Loading, Joe Keogh, Colin C. Caprani, Paul Archbold, Paul Fanning

Conference papers

The issue of excessive vibration of footbridges due to pedestrian loading is now well documented. Bridge vibrations produced from a crowd of pedestrians have been estimated by modifying the effect caused by a single pedestrian by an enhancement factor to take crowd synchronization into account. In this paper this approach is extended to account for the fact that all pedestrians will not have the same pacing frequencies, and the effects of distributions of pacing frequency and other parameters on the enhancement factor are investigated. It is shown that this more faithful representation of pedestrian crowd walking behaviour gives reduced vibration …

A New Congested Traffic Load Model For Highway Bridges, Colin C. Caprani, Colm Carey, Bernard Enright

Conference papers

Long span highway bridges are critical components of any nation’s infrastructure. Therefore accurate assessment of highway bridge loading is essential, and it is well known that congested traffic governs load effect for such bridges. Current congestion models use conservative assumptions about traffic and inter-vehicle gaps. This research investigates congested traffic flow through the use of traffic microsimulation which has the ability to reproduce complex traffic phenomena based on driver interactions. A time series model has been developed to produce a speed time-series similar to the results of the microsimulation. The speed time-series from the new model, combined with the established …

The Influence Of Correlation On The Extreme Traffic Loading Of Bridges, Eugene J. Obrien, Bernard Enright, A. T. Dempsey

Conference papers

Accurate traffic loading models based on measured data are essential for the accurate assessment of existing bridges. There are well-established methods for the Monte Carlo simulation of single lanes of traffic, and this can easily be extended to model the loading on bridges with two independent streams of traffic in opposing directions. However, a typical highway bridge will have multiple lanes in the same direction, and various types of correlation are evident in measured traffic. This paper analyses traffic patterns using multi-lane WIM data collected at two European sites. It describes an approach to the Monte Carlo simulation of this …

Management Strategies For Special Permit Vehicles For Bridge Loading, Bernard Enright, Eugene J. Obrien

Conference papers

An examination of weigh-in-motion data collected recently at sites in five European countries has shown that vehicles with weights well in excess of the normal legal limits are found on a daily basis. These vehicles would be expected to have permits issued by the responsible authorities. It can be seen from the measurements that most of them are travelling at normal speeds. Photographic evidence indicates that, while many are accompanied by an escort vehicle, normal traffic is flowing alongside in other lanes. As European freight volume grows, the frequency of these special vehicles can be expected to increase. Hence, the …

Building Support For Coud Computing In The Irish Construction Industry, Alan Redmond, Alan V. Hore, Roger West

Conference papers

The construction industry has been traditionally recognised as a fragmented sector associated with a poor level of implementation and penetration of Information Communication Technology (ICT) by Small to Medium Size Enterprises (SMEs). Cloud computing is a collective term that can facilitate the ability to collaborate within a central repository that can act as a base for interoperability between various construction disciplines and their software applications. Cloud computing is a new layer of internet architecture that creates an open opportunity to add better functionality to an increasingly global network. The characteristics of cloud computing, such as, shared infrastructure, on-demand applications, elasticity …

Developing A Cloud Integrated Life Cycle Costing Analysis Model Through Bim, Alan Redmond, Alan V. Hore, Roger West

Conference papers

Advancing interoperability between design team applications has been a major challenge for advocates of open standards. The buildingSmart alliance and Open Geospatial Consortium Inc in the U.S. have developed and implemented an Architecture, Engineering, Construction, Owner Operator, Phase 1 Testbed that streamlines communications between parties at the conceptual design phase to establish an early understanding of the tradeoffs between construction cost and energy efficiency. The results of this Testbed combined with an on-going collaborative R&D project ‘Inpro’ co-funded by the European Commission to identify business and legal issues of Building Information Modeling in construction were used as theoretical propositions underlying …

Apartment Living And The Multi-Unit Developments Bill 2009, Lorcan Sirr

Articles

No abstract provided.

B S News January/February

Building Services Engineering

No abstract provided.

Using Virtual Reality To Enhance Electrical Safety And Design In The Built Environment, Martin Barrett, Jonathan Blackledge, Eugene Coyle

Articles

Electricity and the inherent risks associated with its use in the built environment have long since been a priority for the electrical services industry and also the general public who must live and work in this environment. By its nature virtual reality has the advantage of being safe for both the user and equipment. In addition, it offers the user an opportunity to be exposed to a range of scenarios and conditions that either occur infrequently or are hazardous to replicate. This paper presents a prototype desktop virtual reality model, to enhance electrical safety and design in the built environment. …

Finding A Middleware Ict Solution For The Irish Construction Sme Sector, Alan V. Hore, Alan Redmond, Roger West

Conference papers

A key feature of the Irish construction industry is its fragmented structure. Some 16,000 businesses list their main activity as construction, yet no company has more than 3% of the total Irish output. The top 20 companies have less than 15% of total output. There is a very high number of Small to Medium Sized Enterprises (SME‟s) in the sector. However, most software products which address the specific needs of the construction industry are designed for larger companies. It is felt that the needs of the large number of SME‟s in the sector are underserved. The Construction IT Alliance (CITA) …

Bs News

Building Services Engineering

No abstract provided.

Wood Chip Heating For Commercial Buildings In Ireland: An Analysis Of Supply Methods And Financial Viability, Ciaran Berkeley

Masters

Ireland has three central issues regarding the supply and use of fuel and energy: import dependency; competitiveness; and greenhouse gases emissions. Ireland is ranked as one of the most import dependent states in the EU, with over 90% of its fuel sourced fiom abroad [IAEA, 20051. Combined with rapidly fluctuating oil and gas wsts and uncertainty with future supply, it is essential that Ireland find a more secure and sustainable alternative to fossil hels. Wood chip represents one such alternative energy source since it is locally produced and considered to be carbon-neutral. The main objective of this research is to …

Bs News

Building Services Engineering

No abstract provided.

Thermal Testing Of Innovative Building Insulations, Eoghan Frawley

Masters

The main objective of this research was to design and develop a Hot Box to test the thermal properties of Eco-quilt multi-foil insulation. This work began by gaining an understanding into how multi-foil works, how it is installed and examining different variations of this insulation. It was clear at an early stage that there were two conflicting opinions on the thermal performance of multi-foils. One set of tests claimed that the insulation had a thermal resistance of approximately 5 m2oC/W. These tests were carried out in real weather conditions, where temperatures were fluctuating, although one laboratory test achieved similar results. …

Bs News

Building Services Engineering

No abstract provided.

Pilot Rainwater Harvesting Study Ireland, Liam Mccarton, Sean O'Hogain, Anna Reid, Niamh Mcintyre, Jenny Pender

Conference papers

There are no National Water Quality Standards for Rainwater Harvesting supply in Ireland. The Development Technology Centre (DTC) at the Technological University Dublin was commissioned by the National Rural Water Monitoring Committee in 2005 to assess the feasibility of using rainwater harvesting to supplement treated mains water for non-potable uses. The project involved the design, installation, commissioning and monitoring of rainwater harvesting facilities for rural domestic and agricultural water supply. This paper will present the results from the domestic pilot rwh project. A dual water supply system was designed and installed to use rainwater collected from the roof surface to …

Moisture Movement In Concrete During Drying, Niall Holmes

Other resources

The prediction of moisture distribution within concrete slabs has considerable practical importance as it affects the time at which coverings can be safely applied. Moisture in concrete affects creep, shrinkage, strength development, durability and must be present in sufficient quantities for full hydration to occur and for workability on site. However, an excess of moisture in concrete at the point of covering particularly can lead to a number of problems such as delamination and blistering of vinyl, buckling of timber floors and rising of tiles. Moisture migrates in concrete slabs as a diffusion-type process during drying and is lost to …

The Very Basics Of Sustainability - An Alternative Viewpoint (Slides With Audio) (Large File! To Speed Up Download, Right-Click On "Download" Link To Save To Own Pc.), Jim Mcgovern

Other resources

This presentation sets out the very basics of ‘sustainability’, although a definition of sustainability is not attempted. Some of the very basics are the context in which the Earth and humankind exist in space and time, the Earth’s climate, the Earth’s population and humankind’s options and choices. The author advocates keeping an open mind on all available options, including the use of oil, gas, coal, tar sands, carbon capture and sequestration, nuclear power etc., as well as the technologies that are more widely considered ‘green’. The author also argues that, in addressing the challenges that humankind faces, globally concerted effort …

Assessment Of The Embodied Co2eq In Buildings Towards A Sustainable Building Design And Construction, Adolf Acquaye, Aidan Duffy, Biswajit Basu

Conference Papers

Research studies have shown that the initial energy embodied in a building can be as much as 67% of the operational energy over a 25 year period. With growing global concerns over material and resource consumption and the emissions of CO2 into the atmosphere, the energy embodied in buildings constructed in town and cities becomes important and one of the key issues that needs to be tackled in the design stages in order to strive towards sustainable buildings design. In this paper, a hybrid embodied carbon dioxide equivalent (CO2eq) methodology used to assess the CO2eq embodied in buildings is presented. …

Bs News

Building Services Engineering

No abstract provided.

Performance-Based Testing Methodology For Concrete Durability, Niall Holmes, P. A.Muhammed Basheer, Sreejith Nanukuttan, Lulu Basheer

Reports

This report presents an overview of performance based testing methodology for concrete durability and work currently underway jointly at Queens University Belfast and Heriot Watt University, Edinburgh, to undertake this research under a EPSRC funded project (EP/G02152X/1).

EN206-1 superseded BS 5328 on 1^st December 2003 and allows designers and producers to use a wide range of cements and aggregate types for a variety of exposure conditions. In this new standard, the durability of concrete is specified in terms of the constituent materials of concrete, properties of fresh and hardened concrete, limitations for concrete composition, specification of concrete, delivery of …