Civil and Environmental Engineering Commons^™

Reducing Exposures Traffic-Related Air Pollution And Urban Building Design, Elliott T. Gall, Linda George

Mechanical and Materials Engineering Faculty Publications and Presentations

No abstract provided.

Data From: Market Segment Prediction Tool, Philip L. Winters, Amy Lester

TREC Datasets and Databases

Social marketing seeks to develop and integrate marketing concepts with other approaches to influence behaviors that benefit individuals and communities for the greater social good. Social marketing is a useful transportation demand management (TDM) planning approach to promote travel-behavior change, and combines at least seven distinguishing features that sets it apart from other popular, behavior-change planning approaches, such as education and mass media campaigns. These seven features include a focus on socially beneficial behavior change; a strong consumer orientation; the use of audience segmentation techniques and the selection of target audiences; the use of marketing’s conceptual framework (marketing mix and …

Advancing Bridge Technology, Task 10: Statistical Analysis And Modeling Of Us Concrete Highway Bridge Deck Performance -- Internal Final Report, Omar Ghonima, Thomas Schumacher, Avinash Unnikrishnan, Adam Fleischhacker

Civil and Environmental Engineering Faculty Publications and Presentations

Concrete highway bridge deck repairs represent the highest expense associated with bridge maintenance cost. In order to optimize such activities and use the available monies effectively, a solid understanding of the parameters that affect the performance of concrete bridge decks is critical. The National Bridge Inventory (NBI), perhaps the single-most comprehensive source of bridge information, gathers data on more than 600,000 bridges in all fifty states, the District of Columbia, and the Commonwealth of Puerto Rico. Focusing on concrete highway bridge deck performance, this research developed a nationwide database based on NBI data and other critical parameters that were computed …

Internal Gravity Waves And Meso/Submesoscale Currents In The Ocean Anticipating High-Resolution Observations From The Swot Swath Altimeter Mission, Edward D. Zaron, Cesar B. Rocha

Civil and Environmental Engineering Faculty Publications and Presentations

The article offers information on the meeting “Interactions between Internal Gravity Waves and Meso/Submesoscale Currents in the Ocean," held in Portland, Oregon, on February 10-11, 2018. Topics discussed include the role played by geostationary satellites in atmospheric science, the result of interactions between high-frequency internal gravity waves and low-frequency mesoscale andsubmesoscale currents in the ocean, and kinetic energy spectrum of surface currents.

Development Of A Crash Risk-Scoring Tool For Pedestrian And Bicycle Projects In Oregon, Yi Wang, Christopher M. Monsere, Chen Chen, Haizhong Wang

Civil and Environmental Engineering Faculty Publications and Presentations

Methods for identifying and prioritizing high-crash locations for safety improvements are generally crash-based. There are fewer reported crashes involving non-motorized users and, in most states, reported crashes must involve a motor vehicle. This means that minor, non-injury events are not reported and those crashes that are reported tend to be more severe. Selecting projects based only on crash performance is sometimes limiting for these crash types and predicting where these crashes will occur next is also a challenging task. An alternative to crash-based selection is to develop risk-based criteria and methods. This paper presents the results of a research effort …

A Study Of Bus High-Resolution Gps Speed Data Accuracy, Miguel Figliozzi, Nicholas B. Stoll

Civil and Environmental Engineering Faculty Publications and Presentations

The recent availability of high-frequency transit (HFT) GPS data for buses has allowed the estimation of detailed bus-travel speed profiles between bus stops. HFT data are defined as data comprising GPS vehicle trajectory recorded at or less than 5 s intervals. With HFT data it is now possible to measure changes in bus speed at specific locations of interest, such as intersections, ramps, crosswalks, and so on. Previous research efforts have not compared GPS-based bus speeds with general traffic speeds at specific locations between stops. This research fills this knowledge gap, utilizing accurate stationary radar speed data as a baseline …

Webinar: Meeting & Exceeding Mobility User Expectations With Real-Time Transit Information, Sean J. Barbeau, Derek Fretheim

TREC Webinar Series

Every day transit riders ask the same question: when’s the next one coming? To answer this question, transit agencies are transitioning to providing real-time transit information through smartphones or displayed at transit stops.

The proliferation of transit planning and real time arrival tools that have hit the market over the past decade is staggering. Yet with transit ridership on the decline, agencies can’t afford to ignore the importance of providing accurate, real time information to their customers. Real-time transit information improves the reliability and efficiency of passenger travel, but barriers have prevented some transit agencies from adopting the GTFSrealtime v1.0 …

Twelve Questions For The Participatory Modeling Community, Rebecca Jordan, Steven Gray, Moira Zellner, Pierre D. Glynn, Alexey Voinov, Beatrice Hedelin, Eleanor J. Sterling, Kirsten Leong, Laura Schmitt Olabisi, Klaus Hubacek, Pierre Bommel, Todd K. Bendor, Antoine J. Jetter, Bethany Laursen, Alison Singer, Philippe J. Giabbanelli, Nagesh Kolagani, Laura Basco Carrera, Karen Jenni, Christina Prell, National Socio-Environmental Synthesis Center Participatory Modeling Pursuit Working Group

Engineering and Technology Management Faculty Publications and Presentations

Participatory modeling engages the implicit and explicit knowledge of stakeholders to create formalized and shared representations of reality and has evolved into a field of study as well as a practice. Participatory modeling researchers and practitioners who focus specifically on environmental resources met at the National Socio-Environmental Synthesis Center (SESYNC) in Annapolis, Maryland, over the course of 2 years to discuss the state of the field and future directions for participatory modeling. What follows is a description of 12 overarching groups of questions that could guide future inquiry.

3d Hydrodynamic, Temperature, And Water Quality Numerical Model For Surface Waterbodies: Development, Verification, And Field Case Studies, Hussein Ali Mahdi Al-Zubaidi

Dissertations and Theses

Numerical modeling has become a major tool for managing water quality in surface waterbodies such as rivers, lakes, reservoirs, and estuaries. Since the two-dimensional longitudinal/vertical model CE-QUAL-W2 is a well-known model and it has been applied to thousands of waterbodies around the world successfully, its numerical scheme was adapted to develop a new three-dimensional numerical model for simulating hydrodynamics, temperature, and water quality in surface waterbodies. Finite difference approximations were used to solve the fluid dynamic governing equations of continuity, free water surface, momentums, and mass transport. No coordinate transformations were performed and the z-coordinate system has been used. Higher-order …

Experimental And Numerical Investigation On The Bond Strength Of Self-Sensing Composite Joints, Shafique Ahmed, Thomas Schumacher, Jennifer Mcconnell, Erik T. Thostenson

Civil and Environmental Engineering Faculty Publications and Presentations

Laboratory experiments demonstrate that a novel carbon nanotube (CNT)-based sensing layer embedded in the bondline of an adhesively bonded structural joint can detect and monitor deformation and damage progression of the adhesive layer. In this study, experimental and numerical investigations were performed to identify any effect of an embedded CNT-based sensing layer on the bond strength of that joint. To evaluate the mechanical behavior of such a bondline configuration, two sets of single-lap specimens, with and without sensing layer, were prepared and tested to determine the bond strengths of the respective types. Two-dimensional digital image correlation (2D DIC) was utilized …

Human-Centered Design Of An Air Quality Feedback System To Promote Healthy Cooking, Chantal Iribagiza

Dissertations and Theses

Household air pollution (HAP) is responsible for almost 4 million premature deaths every year, a burden that is primarily carried by women and children in developing countries. The mortality and morbidity impact of HAP can be significantly alleviated through clean cookstove interventions. However, for these interventions to be effective, the new intervention stove must be a substantially cleaner technology and adoption should be high and sustained over time.

Woody biomass is the fuel of choice in many developing communities, and contributes substantially to HAP. Several organizations have launched clean cooking interventions to address this issue. However, the majority of those …

Cyclists' Queue Discharge Characteristics At Signalized Intersections, Kirk Thomas Paulsen

Dissertations and Theses

Wider bike facilities intuitively accommodate a greater number of cyclists in the same amount of time, but specific queue discharge characteristics associated with varying widths and/or types of bike facilities have not been thoroughly documented.

The focus of this research analyzed queues of cyclists at four signalized intersections in Portland, OR with varying widths on the approach and downstream intersection legs. A total of 2,820 cyclists within 630 groups of queued cyclists were observed at five different intersection layouts in Portland, Oregon. The layouts consisted of: a standard bike lane six feet wide connecting bicyclists to a standard bike lane …

Assessment Of Seismic Retrofit Prioritization Methodology For Oregon's Highway Bridges Based On The Vulnerability Of Highway Segments, Selamawit Tesfayesus Mehary

Dissertations and Theses

Geologists have indicated that the question is not if a catastrophic earthquake will occur in Oregon but when one will occur. Scientists estimate that there is close to 40 percent conditional probability that a Cascadia subduction zone earthquake of magnitude 8.0 or above will strike Oregon in the next 50 years. In addition, the majority of Oregon's bridge inventory was built prior to the current understanding of bridge response and prior to current understanding of the expected earthquake demands. In order to minimize potential bridge damage in the case of an earthquake, one approach is to retrofit seismically deficient bridges. …

Lateral Deformation Behavior Of Mass Timber Beam To Column Gravity Connection, Tyler James Williams

Civil and Environmental Engineering Master's Project Reports

A beam-to-column connection consisting of glulam beam and column and cross laminated timber floor slab was developed and experimentally evaluated for use in buildings that are expected to undergo earthquake-­­induced lateral drift. The connection utilized a passive gap closure mechanism designed to allow beam rotations during lateral drift while minimizing residual separation between the beam and the column following an earthquake. Full scale cyclic experiments were used to validate the connection’s minimal rotational stiffness and demonstrate low damage performance for lateral drifts exceeding 4.5% drift. The connection exhibited no degradation in gravity load capacity throughout the imposed lateral deformations. An …

Exploring The Relationship Of Bikeshare And Transit In The United States Of America, David Rafael Soto Padín

Civil and Environmental Engineering Master's Project Reports

Bicycling and bike-share have been growing in US cities as transportation alternatives. Despite impressions that bikeshare systems exist solely for tourism, recreation or privileged users, research has shown that bike-share is becoming a transportation mode used by a diverse set of users for various transportation needs. Additionally, a positive relationship has been established between bike-share and transit although most studies on this matter have focused on systems outside the United States. Bike share and transit benefit each other by: (1) contributing to sustainable transportation goals by improving mobility and greenhouse gas reductions, (2) solving the "last mile" problem, (3) reduce …

A 3d Model For Earthquake-Induced Liquefaction Triggering And Post-Liquefaction Response, Arash Khosravifar, Ahmed Elgamal, Jinchi Lu, John Li

Civil and Environmental Engineering Faculty Publications and Presentations

A constitutive soil model that was originally developed to model liquefaction and cyclic mobility has been updated to comply with the established guidelines on the dependence of liquefaction triggering to the number of loading cycles, effective overburden stress (Kσ), and static shear stress (Kα). The model has been improved with new flow rules to better capture contraction and dilation in sands and has been implemented as PDMY03 in different computational platforms such as OpenSees finite-element, and FLAC and FLAC3D finite-difference frameworks. This paper presents the new modified framework of analysis and describes a guideline to calibrate the input parameters of …

Non-Linear Deformation Analysis Of An Embankment Dam, Silas T. Sanderson

Civil and Environmental Engineering Master's Project Reports

Non-linear deformation analysis (NDA) of embankment dams is becoming more common as geotechnical engineers seek to better understand how critical infrastructure will perform under high seismic loading. In order to perform this type of analysis, site specific ground motions and engineering properties of the embankment dam are required. The NDA modeling effort consists of a static and seepage analysis to establish an initial stress state followed by a dynamic analysis to simulate the embankment response to ground motions. Using this approach, a two dimensional NDA was performed on an embankment dam using the NDA program FLAC. This report discusses the …

Methods For Estimating Vehicle Fuel Consumption In Urban Road Networks Using Geographical Attributes, Ryan G. Conrad

Civil and Environmental Engineering Master's Project Reports

This paper presents statistical techniques for estimating vehicle fuel consumption in urban road networks based on vehicle and geographical factors. A routing algorithm utilizing mapping data from OpenStreetMap and elevation data from the Shuttle Radar Topography Mission is presented and used to generate paths that minimize vehicle fuel consumption. The concept of a fuel consumption estimating function is proposed as an extension of the well-known distance-estimating functions that are widely used in logistics planning and research.

Statistical models are developed that estimate fuel consumption in three tested urban areas with vehicle weight, elevation and regional travel speed characteristics being the …

Precipitation Impacts On Groundwater Levels In The Ephemeral Holgate Lake: A Modflow Inquiry, Amory Cervarich

Civil and Environmental Engineering Undergraduate Honors Theses

Holgate Lake, an ephemeral lake located in southeast Portland, has a history of flooding and inundating residential areas. The appearance of the lake is hypothesized to be a function of precipitation-driven changes in groundwater levels. A model was developed using MODFLOW-NWT, a U.S. Geological Survey (USGS) modular hydrologic program, to analyze parameters contributing to the appearance of the lake. The model was most sensitive to changes in aquifer properties including hydraulic conductivity and storativity. The model displayed low sensitivity to changes in precipitation, evapotranspiration, and conductance of surface waters. Results from the analysis contribute to a better understanding of the …

Webinar: Firsthand Data Collection: Students Get Behind The Wheel Of Vehicle Dynamics, Roger Lindgren, Jordan Preston

TREC Webinar Series

Vehicle operating dynamics data have a fundamental impact on the design of roadways, but collecting this type of data is not part of your typical college curriculum. Instead, engineering students are handed a textbook, leaving them without a firsthand experience of how accelerations and decelerations “feel” to the driver, the ultimate consumer of their designs. Seeking to change this norm, Roger Lindgren and C.J. Riley, civil engineering professors at the Oregon Institute of Technology, undertook a NITC education project to incorporate more real-world data collection and analysis into transportation courses. This webinar will offer a detailed look at the recently …

Minimum Required Length For Geotechnical Lateral Stability Of Rocksocketed Pile Shafts, Arash Khosravifar, Zia Zafir

Civil and Environmental Engineering Faculty Publications and Presentations

The original strong-rock (SR) p-y curves for rock-socketed shafts exhibit a brittle response where the post-peak resistance drops to approximately zero. This brittle response could result in a progressive failure of the rock p-y curves which, in turn, results in excessive pile lengths. This paper proposes a modification to the strong-rock (SR) p-y curves where the post-peak residual strength is equal to 20% of the ultimate resistance (0.2*pult). This residual resistance is proposed based on the assumption that the lateral resistance of cracked rock (after the peak point) should not be smaller than the lateral resistance of heavily weathered rock …

Flexural Strength, Ductility, And Serviceability Of Beams That Contain High-Strength Steel Reinforcement And High-Grade Concrete, Anas Yosefani

Dissertations and Theses

Utilizing the higher capacity steel in design can provide additional advantages to the concrete construction industry including a reduction of congestion, improved concrete placement, reduction in the required reinforcement and cross sections which would lead to savings in materials, shipping, and placement costs. Using high-strength reinforcement is expected to impact the design provisions of ACI 318 code and other related codes.

The Applied Technology Council (ATC-115) report "Roadmap for the Use of High-Strength Reinforcement in Reinforced Concrete Design" has identified key design issues that are affected by the use of high-strength reinforcement. Also, ACI ITG-6, "Design Guide for the Use …

Relative Sea Level, Tides, And Extreme Water Levels In Boston Harbor From 1825 To 2018, Stefan Talke, A. C. Kemp, J. Woodruff

Civil and Environmental Engineering Faculty Publications and Presentations

Using newly-discovered archival measurements, we construct an instrumental record of water levels and storm tides in Boston (MA) since 1825. After ascertaining the 19th century datum and correcting for a 0–0.03 m bias in the modern tide-gauge record, we show that local, decadally-averaged relative sea level (RSL) rose by 0.2860.05 m since 1826, with an acceleration of 0.02360.009 mm/yr2. Tide range decreased by 5.5% between 1830 and 1910, due in large part to dredging and filling of Boston Harbor, and trended slightly upward thereafter. An evaluation of storm events since 1825 suggests that trends in flood risk are driven by …

Baroclinic Tidal Sea Level From Exact-Repeat Mission Altimetry, Edward Zaron

Portland Institute for Computational Science Publications

A near-global model for the sea-surface expression of the baroclinic tide has been developed using exact-repeat mission altimetry. The methodology used differs in detail from other altimetry-based estimates of the open ocean baroclinic tide, but it leads to estimates which are broadly similar to previous results. It may be used for prediction of the baroclinic sea level anomaly at the frequencies of the main diurnal and semidiurnal tides, K₁, O₁, M₂, S₂, as well as the annual modulates of M₂, denoted MA₂ and MB₂. Based on a …

A Survey Of Ride-Hailing Passengers, Steven Gehrke

PSU Transportation Seminars

In less than a decade, the ride-hailing industry, led by Uber and Lyft, has dramatically transformed the way we travel in our metro regions. Rider adoption of these on-demand mobility services has proceeded much quicker than our understanding of their impacts to our urban transportation systems. Planning for this transformation in personal mobility, which will have unintended consequences, has been made more difficult by the scarcity in meaningful data made available by these ride-hailing companies. Public agencies responsible for managing congestion and transit services are hindered in their ability to successfully plan for the integration of this emergent travel mode …

Analysis Of The Contribution Of Transportation And Land Use To Citizen Perceptions Of Livability, Rebecca Lewis

PSU Transportation Seminars

What is livability? How does the built environment influence resident perceptions of livability? Although livability is a broadly used term and a key goal in land use and transportation plans at the state level, it is unclear whether residents think their neighborhoods are livable and what contributes to their perception of livability. The purpose of the project was to understand how Oregonians, in neighborhoods of varying densities and within Metropolitan Planning Organizations (MPOs), perceive livability at the nexus of transportation and land use. We sought to understand how residents define and perceive livability in three different MPOs in the state: …

Bond-Type Cfrp Anchorage System For Prestressed Concrete Applications, Yasir Saeed, Franz Rad, Salam Al-Obaidi

Student Research Symposium

High tensile strength, adjustable and high modulus of elasticity, high strength-to-weight ratio, and non-corrosiveness are great features which have made Fiber Reinforced Polymer (FRP) very attractive to engineers. Prestressed concrete applications require high strength prestressing material that could apply and maintain effective compressive force to concrete members. Although FRPs, especially Carbon FRP (CFRP), have the desired strength, no efficient system for its anchorage to concrete has been devised yet. This paper presents an experimental evaluation on new bond-type CFRP anchors. A total of eleven samples were prepared and tested. The CFRP rods were 0.375 in. and 0.50 in. diameter. The …

Coastal Bridges Subjected To Waves: Analysis And Quantification Of Forces, Alaa Waleed Hameed, Thomas Schumacher

Student Research Symposium

Coastal bridges can be exposed to significant wave forces during hurricane events. This research is studying the parameters that govern the structural response through data analysis of a large experimental data set. This data set was generated by testing a heavily-instrumented 1:5-scale bridge superstructure model, which was modeled after the I-10 Bridge over the Escambia Bay, under various wave conditions and water levels in a large wave flume. A unique aspect of the model is that the flexibility of the substructure can be adjusted to represent different types of bridge support systems. This poster discusses the first part of the …

Seasonality Of Tides In Southeast Asian Waters, Adam T. Devlin, Edward Zaron, David A. Jay, Stefan Talke

Civil and Environmental Engineering Faculty Publications and Presentations

An analysis of water level time series from 20 tide gauges in Southeast Asia finds that diurnal and semidiurnal astronomical tides exhibit strong seasonal variability of both amplitude and phase, which is not caused by known modulations of the astronomical tide-generating forces. Instead, it is found that the tidal properties are coherent with the western North Pacific monsoon index (WNPMI), indicating that monsoonal mechanisms are the likely cause. The study domain includes the Malacca Strait, Gulf of Thailand, the southern South China Sea, and Java Sea. The character of the geography and the tidal variability is different in each of …

Fhwa Guidebook For Measuring Multimodal Network Connectivity, Joseph Broach

PSU Transportation Seminars

In 2016 the United States Department of Transportation (USDOT) Federal Highway Administration (FHWA) published a Guidebook for Developing Pedestrian and Bicycle Performance Measures that presents methods for measuring walking and bicycling performance and activities and embedding them into the transportation planning and decisionmaking process (U.S. Department of Transportation 2016). Building on the 2016 guidebook, this resource focuses on pedestrian and bicycle network connectivity and provides information on incorporating connectivity measures into state, metropolitan, and local transportation planning processes.

Connectivity measures can help transportation practitioners identify high priority network gaps, implement cost-effective solutions that address multiple needs, optimize potential co-benefits, and …