Civil and Environmental Engineering Commons^™

Dynamic Response Of Thin-Walled Beams, Rodney L. Dreisbach, Martin L. Moody, James K. Iverson

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Bending Strength Of Deep Corrugated Steel Panels, James L. Jorgenson, Chingminn Chern

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

On The Stiffness, Stresses And Buckling Analysis Of Corrugated Shear Webs, Charles Libove

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Screw Connected Shear Diaphragms, Larry D. Luttrell

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Behavior Of Light Gage Diaphragms Coupled With X-Bracing, James M. Fisher, Donald L. Johnson

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Drift Control With Light Gauge Steel Infill Panels, Craig J. Miller

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Cold-Formed Steel Wall Stud Design, Amir Imaan, Teoman Pekoz

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Box Beam Stiffening Using Cold Formed Decks, Condrad P. Heins, David Blank

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Composite Slabs With Steel Deck Panels, Larry D. Luttrell, James H. Davison

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Cold-Formed Steel Rack Structures, George Winter, Teoman Pekoz

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Effects Of Allowable Steel Thickness Variation, C. Keith Brasher

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Post-Local-Buckling Behavior Of Thin-Walled Columns, Shien T. Wang, Yei L. Tien

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Buckling Of Diaphragm-Braced Columns Of Unsymmetrical Sections And Application To Wall Studs Design, Amir Simaan, George Winter, Teoman Peköz

CCFSS Library (1939 - present)

Lateral bracing has a significant effect on increasing the buckling load of compression members. In the case of wall stud construction, such bracing is provided by wallboards directly attached to the stud along its length and results in increasing the load carrying capacity significantly. The objective of this investigation is to study the behavior of singly symmetric sections braced by shear diaphragms and to apply the theoretical findings verified by experimental results to the design of wall studs. In the present investigation the shear rigidity as well as the rotational restraint of the diaphragm are considered. Using an energy approach, …

Buckling Of Diaphragm-Braced Columns Of Unsymmetrical Sections And Application To Wall Studs Design, Amir Simaan

CCFSS Library (1939 - present)

No abstract provided.

Velocity Distribution Versus Sediment In The Missouri River, Glendon Taylor Stevens, Terence E. Harbaugh, Paul R. Munger

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Analysis of the large quantities of velocity and sediment data gathered on the Missouri River has not been undertaken in the past due to the heavy workloads of U.S. Army Corps of Engineers staff. The need to undertake this effort has long been recognized by both the Kansas City District and the Omaha Division. As a result of this need, the Kansas City District, Corps of Engineers, entered into a contract with the curators of the University of Missouri in September 1972. Dr. G. T. Stevens of the University's Rolla campus will be the principal investigator and will perform data …

Current Design Practice For Bridge Superstructures Connected To Flexible Superstructures, Jack H. Emanuel, J. Leroy Hulsey, John Best, Joseph H. Senne, Leroy E. Thompson

CCFSS Library (1939 - present)

No abstract provided.

Reversed And Repeated Lost Tests Of Full-Scale Steel Frames, Lauren D. Carpenter, Le-Wu Lu

CCFSS Library (1939 - present)

No abstract provided.

Plastic Subassemblage Anlysis And Tests For Rigid High-Rise Steel Frames, J. Hartley Daniels, S. W. Kim

CCFSS Library (1939 - present)

No abstract provided.

Tests On Field Welded Puddle And Fillet Weld Connections, R. S. Yarnell, Teoman Peköz

CCFSS Library (1939 - present)

INTRODUCTION This report contains the results of tests on 122 field welded connections. Most of the specimens are approximately the same as those that were shop welded previously and tested. The results of tests on shop welded specimens are given in Ref. 2. Those field welded specimens that do not correspond to the shop welded specimens are indicated in Table lA. Except as noted, all notations, variables, weld configurations and procedures are identical with those in Ref. 2. All specimens were tested in a hydraulic test machine under monotonically increasing slowly applied tensile force. This report differs from Ref. 2 …

Diaphragm Braced Thin-Walled Open Sections And Design Of Wall Studs, Amir Simaan, Teoman Peköz

CCFSS Library (1939 - present)

INTRODUCTION Cold-formed steel wall studs generally are I, Z or channel shaped with or without stiffening lips, and with webs perpendicular to the plane of the wall. Because of their configuration and dimensions, these sections are quite unstable by themselves. However, the stability and, hence, load-carrying capacity of such studs are increased substantially once they are connected to the wallboard material. The main function of the wallboard is that of enclosure, but it serves also as a bracing system for the studs. Gypsum board, vegetable fiberboard, tempered board or plywood are commonly used wallboard materials. Such boards are connected to …

Column Research Council: Proceedings 1973, Column Research Council

CCFSS Library (1939 - present)

One of the purposes of the Council is to maintain a forum where problems related to the design and behavior of columns and other compression elements in metal structures can be presented for evaluation and discussion. The Annual Technical Session provides opportunity to carry out this function. The 1973 Annual Technical Session was held on May 2 and 3 at the Los Angeles Hilton Hotel in Los Angeles, California. Sixty persons attended the Session and thirty-three papers were delivered. A panel discussion on "Frame Stability Under Seismic Loading" was held in the evening of May 2, 1973. Panelists were E. …

Legendre Coefficients For Series Solution Of The Orientation Distribution Function For Ellipsoidal Macromolecules In Two-Dimensional Laminar Flow, Myrne R. Riley

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The double refraction and viscosity of a suspension of asymmetrical colloidal particles subject to continuous laminar flow vary with the orientation distribution of the suspended particles produced by the shearing field and Brownian motion. Recursion formulas are developed for the Legendre coefficients of the series solution of the orientation distribution function for a suspension subject to two-dimensional laminar flow, thus, extending the works of Peterlin, Wayland, and Scheraga. © 1973.

The Study Of Sulfur Dioxide Distribution Surrounding A Lead Smelting Industry In The New Lead Belt Of Southeastern Missouri, Jeng-Sheng Hwang

Masters Theses

"The purpose of this investigation was to study the magnitude and distribution of sulfur dioxide in the air surrounding the smelter of Missouri Lead Operating Company (now AMAX Lead Company of Missouri) in southeast Missouri, and evaluate the inter-relationships between sulfur dioxide incidents, meteorological factors, and plant operations.

Field research was conducted employing two weather stations and three sulfur dioxide monitoring stations. The data obtained from strip charts at each station were recorded and analyzed manually as well as by UMR computer facilities. From the studies conducted, it was found that the annual predominant winds occurred from S and SE …

A Study Of The Splash-Plate Tower Concept, A Biological Wastewater Treatment Process, Robert Joseph Millman

Masters Theses

"Different modifications and newer methods of treatment which utilize the basic trickling filter concepts, such as the Bio-Disc process, have been developed to increase the efficiency of wastewater treatment. The purpose of this investigation was to develop and evaluate a newer such method called the splash plate concept.

The splash-plate concept utilizes a series of circular plates mounted horizontally on a vertical axis. This allows the wastewater being treated to travel over one plate to the edge and splash down to the next lower plate and so on throughout the tower. A total of four units were operated at different …

Pollution Abatement Of Mining Effluents In The New Lead Belt Of Missouri, Walter Armando Escalera

Masters Theses

"The mining and milling effluents from the Buick Mine of the AMAX Lead Company of Missouri have produced undesirable algal growths in Strother Creek below their tailings pond. A field and laboratory study was performed to determine the characteristics of the mining and milling wastewaters, and to study the effects of heavy metals and nutrients on algal growths. Laboratory studies included: Physico-chemical analysis of the wastewater; determination of heavy metal concentrations; algal growth studies in an experimental model; and microscopic examinations of the algal growths. Field work comprised: A study of the mining and milling operations; in-plant investigations of the …

Marshall Properties Of Asphaltic Concrete Containing Glass-Rich Fractions, James Joseph Schneider

Masters Theses

"The use of crushed waste glass as an aggregate in asphaltic concrete has been suggested as a means for re-using glass separated from municipal refuse. Laboratory studies and field installations have generally utilized clean glass obtained by hand sorting bottles from the other refuse and crushing them to produce a desired gradation. For this type of asphalt to be economical though, the glass fraction must be separated mechanically. For mechanically separated materials, the glass-rich fraction also contains such items as metal, bone, rubber and other non-glass materials.

The objective of the study was to determine the effects upon Marshall properties …

A Survey Of Missouri's Water Resources Involvement, Frank R. Ellis Ii

Masters Theses

"A survey of the procedures for development of water resources in the State of Missouri reveals shortcomings in many areas. Recommended improvements include: 1) revising and publishing a statewide water plan, 2) improving methods of project evaluation and priority establishment, 3) expanding methods of citizen involvement, and 4) reorganization of state agencies and legal authority. The paper examines the history of water resource involvement by the State of Missouri, and current jurisdiction of state agencies, including procedures for review of environmental impact statements"--Abstract, page iv.

A Comparison Of Three Urban Hydrology Models, Richard F. Astrack

Masters Theses

"Three models, the British Road Research Laboratory Hydrograph Method, the Hydrocomp Simulation Program, and the HEC-1 Flood Hydrograph Package, are applied to the Boneyard Creek basin. Comparing the ability of these models to reproduce the observed peak discharge, time of the peak, and the first runoff volume determines the accuracy of these models"--Abstract, page iii.

A Highway Rest Area Design Based On A Use Study In Outstate Missouri, Dimitris Peter Perandakos

Masters Theses

"The limited number of rest areas in the State of Missouri does create a major problem for the motorist travelling in this state.

The author became more aware of this problem from personal experience and decided to investigate it. For that he interviewed over one thousand motorists on the only rest area that is located on 1-44, near the city of Stanton. He also took traffic counts to determine the average daily traffic volumes of Highway 1-44 and of the rest area stated above.

The data collected from the above steps was used for the design of a new rest …

A Study Of The Ability Of Water Treatment To Remove Trace Organics, Daniel Lee Oliver

Masters Theses

"The purpose of this investigation was to study the ability of water treatment processes, especially coagulation and chlorination, to remove trace organic materials from raw river water. Trace organic concentrations were determined using the Organics-Carbon Adsorbable (O-CA) technique, a miniaturized Carbon Adsorption Method (CAM).

Missouri River raw and treated water, obtained on 3 different dates at the Jefferson City, MO, water treatment plant, was used. The effect of various treatment steps, including settling, softening with lime, coagulating with copperas or alum over a range of doses, and chlorinating at the dose necessary to give a free residual of 2 mg/1 …