Civil and Environmental Engineering Commons^™

Supplement 2004 To The North American Specification For The Design Of Cold-Formed Steel Structural Members 2001 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by a joint effort of the American Iron and Steel Institute Committee on Specifications, the Canadian Standards Association Technical Committee on Cold Formed Steel Structural Members (S136), and Camara Nacional de la Industria del Hierro y del Acero (CANACERO) in Mexico. The organizations and the Committees have made a diligent effort to present accurate, reliable, and useful information on cold-formed steel design. The Committees acknowledge and are grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specific references are included …

Supplement 2004 To The North American Specification For The Design Of Cold-Formed Steel Structural Members, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by a joint effort of the American Iron and Steel Institute Committee on Specifications, the Canadian Standards Association Technical Committee on Cold Formed Steel Structural Members (S136), and Camara Nacional de la Industria del Hierro y del Acero (CANACERO) in Mexico. The organizations and the Committees have made a diligent effort to present accurate, reliable, and useful information on cold-formed steel design. The Committees acknowledge and are grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specific references are included …

Distortional Buckling Of Cold-Formed Steel Members In Bending, Cheng Yu, Benjamin W. Schafer

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

Laterally braced cold-formed steel beams generally fail due to local and/or distortional buckling in combination with yielding. For many cold-formed steel (CFS) studs, joists, purlins, or girts, distortional buckling may be the predominant buckling mode. However, distortional buckling of CFS beams remains a largely unaddressed problem in the current North American Specification for the Design of Cold-Formed Steel Structural Members (NAS). Further, adequate experimental data on unrestricted distortional buckling in bending is unavailable. Therefore, two series of bending tests on industry standard CFS C and Z-sections were performed and presented in this dissertation. The testing setup was carefully designed in …

The Influence Of Ammonia And Carbon Dioxide On The Sorption Of A Basic Organic Pollutant To A Mineral Surface, Maneerat Ongwandee, Glenn Morrison, S. S. Bettinger

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Indoor surfaces have a sorptive capacity for organic pollutants which may be significantly influenced by other gases and the pH of the surface. in this research, we examine the influence of a common indoor gaseous acid, CO₂, and base, NH₃, on the adsorption of a volatile organic base, trimethylamine (TMA), to a mineral surface, zirconium silicate beads. Varying ammonia and CO₂ within concentration ranges of indoor relevance substantially influences the sorptive capacity of this mineral surface. Increasing the CO₂ mixing ratio to 1000 p.p.m. enhances surface capacity of TMA by 40-50%; increasing the NH3 …

Secondary Reinforcement For Fiber Reinforced Polymers Reinforced Concrete Panels, Reid Stephens Jr.

Opportunities for Undergraduate Research Experience Program (OURE)

No abstract provided.

Modal Perturbation Method For The Dynamic Characteristics Of Timoshenko Beams, Meng-Lin Lou, Quihua Duan, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Timoshenko beams have been widely used in structural and mechanical systems. under dynamic loading, the analytical solution of a Timoshenko beam is often difficult to obtain due to the complexity involved in the equation of motion. In this paper, a modal perturbation method is introduced to approximately determine the dynamic characteristics of a Timoshenko beam. In this approach, the differential equation of motion describing the dynamic behavior of the Timoshenko beam can be transformed into a set of nonlinear algebraic equations. Therefore, the solution process can be simplified significantly for the Timoshenko beam with arbitrary boundaries. Several examples are given …

Aggregate Gradation Optimization -- Literature Search, David Newton Richardson

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Spatial Bioaccumulation Modeling In A Network Of Bayous, Ronaldo Luna, Karen H. Watanabe, Andrew J. Wilding

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A software system, Spatial Network Bioaccumulation Model (SNBM), was developed to model the bioaccumulation of polycyclic aromatic hydrocarbons (PAHs) in aquatic food webs. The SNBM uses a geographic information system as an engine to: (i) store the spatial representation of input parameters (the data related to the ecosystem), (ii) transfer input and output data to and from the food-web bioaccumulation model, and (iii) display the predicted food-web organism concentrations over a base map of the field site. The bioaccumulation model is a time-dependent, set of first-order ordinary differential equations that are solved numerically. Many sampling locations can be analyzed using …

Engineered Struvite Precipitation: Impacts Of Component-Ion Molar Ratios And Ph, Jun Wang, Joel Gerard Burken, Xiaoqi Zhang, Rao Y. Surampalli

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Struvite precipitation has the potential for removing and recovering phosphorus from agricultural wastewater streams, such as concentrated animal feeding operations wastewater. However, impacts of anticipated component-ion molar ratios and potentially interfering ions are unknown as are the compounding pH relationship with respect to all potential complexes. This research experimentally investigates and mathematically models these factors. Emphasis is placed upon the composition of formed deposits and model validation with experimental data. Results show that calcium is a major interfering ion affecting the deposit composition, decreasing struvite purity. X-ray diffraction (XRD) and scanning electron microscopy + energy dispersive spectrometry were used to …

2004 Supplement To The Standard For Cold-Formed Steel Framing – Prescriptive Method For One And Two Family Dwellings, 2001 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Aisi Standard For Cold-Formed Steel Framing – General Provisions, 2004 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specific references are included in the Commentary. With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is …

Aisi Standard For Cold-Formed Steel Framing – Wall Stud Design, 2004 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specific references are included in the Commentary. With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is …

Standard For Cold-Formed Steel Framing – General Provisions, 2004 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specific references are included in the Commentary.

With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is …

2004 Supplement To The Standard For Cold-Formed Steel Framing Prescriptive - Method For One And Two Family Dwellings, 2001 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specific references are included in the Commentary.

With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is …

Commentary On The Standard For Cold-Formed Steel Framing Prescriptive Method For One And Two Family Dwellings, 2001 Edition With 2004 Supplement, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject.

With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is anticipated that AISI will publish updates of …

Standard For Cold-Formed Steel Framing -- Prescriptive Method For One And Two Family Dwellings, 2001 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject.

With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is anticipated that AISI will publish updates of …

Standard For Cold-Formed Steel Framing – Wall Stud Design, 2004 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Framing Standards. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel framing design and installation. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject. Specific references are included in the Commentary.

With anticipated improvements in understanding of the behavior of cold-formed steel framing and the continuing development of new technology, this material may eventually become dated. It is …

Field Evaluation Of Unreinforced Masonry Walls Strengthened With Frp Composites Subjected To Out-Of-Plane Loading, Gustavo Tumialan, Davide Tinazzi, John J. Myers, Antonio Nanni

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Unreinforced masonry (URM) walls at a decommissioned building in St. Louis, Missouri were tested to failure. the walls belonging to the present experimental program were subjected to out-of-plane loading. Previous work on URM and reinforced masonry walls strengthened with FRP laminates has shown remarkable increases in capacity and ductility. However, most of this research has been conducted under laboratory conditions, where, many times, it is a difficult task to represent real field conditions. in this context, this experimental program offered a singular opportunity for performing field experimentation on URM walls strengthened with Glass, Aramid and Carbon Fiber Reinforced Polymers (GFRP, …

Strengthening Of Masonry Structures With Frp Composites, J. Gustavo Tumialan, Francesco Micelli, Antonio Nanni

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Unreinforced masonry (URM) walls are prone to failure when subjected to out-of-plane and in-plane loads. the development of effective and affordable strengthening strategies is a need. in this context fiber reinforced polymer (FRP) materials offer viable solutions to solve or lessen the effects of overloading. This paper describes FRP systems proposed for use in the strengthening of masonry elements as well as the impact of such systems on the building being retrofitted. Also, field applications, some potential and others already implemented applications, are described. Field applications include strengthening for natural hazards (i.e. earthquakes and high wind pressures) as well as …

Multiobjective Optimization Of Seismic Structures, Franklin Y. Cheng, Dan Li, Jeffrey Ger

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents a constrained Mult objective optimization method in the form of a robust, practical, problem-independent formulation based on genetic algorithm combined with game theory and investigates the effect of Mult objective optimization on structural design. the study includes objectives, constraints, and design variables as well as their effect on structural design and behavior. the algorithm comprises - Mult objective fitness function, niche method, and Pareto set filter. a 10-story setback building is used to illustrate the evaluation of three choices: steel frame, reinforced concrete frame, composite steel and reinforced concrete frame. Evaluation is based on economics as well …

An Assessment Of In-Situ Frp Shear And Flexural Strengthening Of Reinforced Concrete Joists, Annaiah Raghu, John J. Myers, Antonio Nanni

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study examines the in-situ shear performance and modes of failure of reinforced concrete (RC) T-beams (joists) strengthened with externally bonded carbon fiber reinforced polymer (CFRP) sheets. the experimental program consisted of testing a series of nine structural components at the Malcom Bliss Hospital, in St. Louis, Missouri. the members were tested to validate the different systems and techniques of strengthening. in particular, this paper covers cases of U-Wraps with and without end-anchors. the experimental results clearly indicate the contribution of externally bonded CFRP sheets in increasing the shear capacity of the system. the experimental and theoretical shear strength of …

Overview Of The Japanese Guidelines For Seismic Retrofitting Of Rc Columns Using Frp Materials, Gustavo Tumialan, Hiroshi Fukuyama, Antonio Nanni

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The increasing uses of FRP materials for the strengthening and upgrade of buildings has motivated the international engineering community to produce guidelines for the proper design, handling and installation of the externally bonded FRP systems. Thus, independent efforts coordinated by different organizations such as the Japan Building Disaster Prevention Association (JBDPA) and the American Concrete Institute (ACI) have led to implementing appropriate provisions. the JBDPA guidelines mainly focus on seismic retrofitting of structural elements, which implies the strengthening for shear of deficient structural elements. This paper describes and comments on some of the design approaches provided by the JBDPA guidelines …

Elastomer Reclaiming Composition And Method, Michael W. Rouse, Victor M. Deeb, Morgan L. White, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The present invention relates to elastomeric compositions and methods including compositions and methods involving the use of aromatic alcohols. The present invention further relates to elastomeric compositions that can include ground reclaimed elastomeric particles. Compositions of the present invention are usable in numerous elastomeric applications including interior and exterior vehicle parts, roofing, asphalt, and any other applications that employ an elastomer as an ingredient thereof, particularly those utilizing rubber or a similar elastomer.

The present invention further is directed to asphalt compositions and their methods of manufacture and use.

Ultimate Strength Of A Continuous Decking Of Cold-Drawn Low-Ductility High Strength Steel, A. Monayem Akhand, W. H. Wan Badaruzzaman, Kosai A. Sanjery

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Profiled decking of cold-drawn low-ductility high strength steel is a relatively new introduction to composite floor construction. This type of decking shows high sensitivity to distortional as well as local buckling. Prediction of ultimate strength of such decking in continuous configuration is not adequately covered in any of the analytical methods of modern day codes. Instead, due to inadequate guidance, various design codes currently apply additional restrictions on their design and use. The support moment-rotation and ultimate moment of resistance of such decking are the two most important parameters in designing such decking as continuous structure for the construction stage …

Web Crippling Of Cold Formed Steel Multi -Web Deck Sections Subjected To End One-Flange Loading, J. A. Wallace, R. M. Schuster

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Presented in this paper are the results of a study where the web crippling capacity of multi-web deck sections subjected to End One-Flange loading (EOF) was investigated. A total of 148 tests were completed. New coefficients were established using the data from this study and any appropriate data from previous work. New resistance factors and factors of safety were also established. Also investigated in this study was the web crippling capacity of partially fastened deck sections and re-entrant deck type sections subjected to EOF loading. Seventy-seven (77) partially fastened multi-web decks and 36 re-entrant decks were tested in this study. …

Behavior Of Complex Hat Shapes Used As Truss Chord Members, Nuthaporn Nuttayasakul, W. Samuel Easterling

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Cold-formed steel roof truss systems that use complex hat shape members for both top and bottom chord elements are a growing trend in the North America steel framing industry. When designing cold-formed steel sections, a structural engineer typically tries to improve the local buckling behavior of the coldformed steel elements. The complex hat shape has proven to limit the negative influence of local buckling. However, a distortional buckling mode can be the control mode of failure in the design for the chord member with an intermediate un-braced length. The chord member may be subjected to both bending and compressive load …

Channel Section Beams Under Static And Impact Loading, J. Rhodes, M. Macdonald

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The elasto-plastic behaviour of plain channel section beams under central point loading is investigated under static and impact loading conditions. Two different loading set-ups are considered, the first in which the load is applied to cause compression at the flange free edges and the second in which the load is applied to cause tension at the flange free edges. For each of these load set-ups static loading tests, single impact loading tests and multiple impact loading tests are carried out on a total of 86 channel beams. The energy absorption behaviour of the beams tested is examined and the static …

Cold-Formed Steel Examples To The Theory And Finite Element Implementation Of Plasticity, Herm Hofmeyer

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

This paper presents two examples to the theory and finite element implementation of plasticity. The first example is on the cross-sectional behavior of trapezoidal sheeting subjected to a concentrated load. It is shown that the number of elements (and thus the number of integration points) along the comer radius are important for the correct modeling of this static problem. The second example is on the failure of first-generation sheeting subjected to a concentrated load and a bending moment. This problem, especially for large span lengths, can be solved only with explicit dynamic simulations. These are, for our research field, for …

Shear Stiffness Of Pallet Rack Upright Frames, S. Sambasiva Rao, R. G. Beale, M. H. R. Godley

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

PaIIet racks, often fabricated using cold-formed steel, are used for the storage of goods. Uprights of these racks are braced in the cross-aisle direction forming a frame, which behaves like a built-up column. Evaluation of the shear stiffness of this frame is needed to determine the buckling load. Currently two approaches prevail in the rack industry to determine the shear stiffness. The RMI code uses a theoretical formula and the FEM code requires testing. There is a considerable difference in the stiffness values determined by two approaches. The present paper describes experimental and numerical studies conducted at Oxford Brookes University …

Tests Of Storage Rack Channel Columns With Rear Flanges, Nabil Abdel-Rahman, Ashraf Fadel, Mohamed Ei-Sadaawy, Sherif Mourad

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

An experimental study was performed to investigate the ultimate strength and modes of failure of axially loaded channel rack columns with rear flanges. A total of 16 column specimens fabricated by press-brake forming method were tested up to failure. The material properties of the column specimens were determined using standard tensile coupon tests. The deformation and stress behavior of the tested columns were monitored using displacement transducers and strain gauges. The effects of column slenderness ratio, thickness, perforation, and end conditions on the column ultimate strength and mode of failure were studied. The test failure loads were compared to the …