Civil and Environmental Engineering Commons^™

Diplomacy Lab Provides Term-Length Group Projects Integrating Policy Analysis And Liberal Arts Into The Traditional Engineering Classroom, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Science in diplomacy, the use of trained scientist to inform and support foreign policy objectives, has been a part of U.S. foreign policy since the time of Benjamin Franklin. The Diplomacy Laboratory project, a public-private partnership, allows the Department of State to 'course source' projects to seek input from universities and to recruit talented students to consider careers in diplomacy. This paper provides a summary of a case study using a DipLab project as part of a term-length, writing assignment in courses for undergraduate and graduate environmental engineering students. An overview of DipLab and suggested best practices to integrate DipLab …

Using Nursing Theory To Improve The Teaching Of Engineering Practice, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Engineering education includes both classroom training in sciences and professional skills as well as learning-through-doing to integrate practice and engineering design into the future licensed Professional Engineer (PE). In a similar manner, nursing education includes both classroom training in sciences and professional skills as well as learning through doing to integrate practice and caring into the future licensed Registered Nurse (RN). From the mid-19th century until modern day, the fields of environmental engineering and community health nursing have worked side-by-side to prevent disease while promoting health and wellness. This paper provides a synthesis of previously published case studies by the …

Dermal Uptake Of Phthalates From Clothing: Comparison Of Model To Human Participant Results, Glenn Morrison, C. J. Weschler, G. Bekö

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this research, we extend a model of transdermal uptake of phthalates to include a layer of clothing. When compared with experimental results, this model better estimates dermal uptake of diethyl phthalate and di-n-butyl phthalate (DnBP) than a previous model. The model predictions are consistent with the observation that previously exposed clothing can increase dermal uptake over that observed in bare-skin participants for the same exposure air concentrations. The model predicts that dermal uptake from clothing of DnBP is a substantial fraction of total uptake from all sources of exposure. For compounds that have high dermal permeability coefficients, dermal uptake …

Numerical Simulations Of Intrusive Gravity Currents Interacting With A Bottom-Mounted Obstacle In A Continuously Stratified Ambient, Jian Zhou, Subhas K. Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this study, the flow dynamics of intrusive gravity currents past a bottom-mounted obstacle were investigated using highly resolved numerical simulations. The propagation dynamics of a classic intrusive gravity current was first simulated in order to validate the numerical model with previous laboratory experiments. A bottom-mounted obstacle with a varying non-dimensional height of D~ = D/ H, where D is the obstacle height and H is the total flow depth, was then added to the problem in order to study the downstream flow pattern of the intrusive gravity current. For short obstacles, the intrusion re-established itself downstream without much distortion. …

Studies Of Hypervelocity Impact Phenomena As Applied To The Protection Of Spacecraft Operating In The Mmod Environment, William P. Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In keeping with the tradition of the Hypervelocity Impact Society, this paper is a written version of the keynote address I presented at the start of 2015 Hypervelocity Impact Symposium as the recipient of the Society's Distinguished Scientist Award. It covers the highlights of my nearly 30 year career working in the area of hypervelocity impact phenomenology, mainly as it is applied to the protection of humans and spacecraft that work an operate in the micrometeoroid and orbital debris (MMOD) environment.

Ballistic Limit Equations For Non-Aluminum Projectiles Impacting Dual-Wall Spacecraft Systems, William P. Schonberg, J. Martin Ratliff

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

One of the primary design considerations of earth-orbiting spacecraft is the mitigation of the damage that might occur from an on-orbit MMOD impact. Traditional damage-resistant design consists of a 'bumper' that is placed a small distance away from a spacecraft component or from the wall of the element in which it is housed. The performance of such a multi-wall structural element is typically characterized by its ballistic limit equation (BLE), which defines the threshold particle size that results in a failure of the spacecraft element. BLEs are also key components of any micro-meteoroid/orbital debris (MMOD) risk assessment calculations. However, these …

Real-Time Flood Forecasting And Information System For The State Of Iowa, Witoldld F. Krajewski, Daniel Ceynar, Ibrahim Demir, Radoslaw Goska, Anton Kruger, Carmen Langel, Ricardo Mantilllla, James Niemeier, Felipe Quintero, Bong Chul Seo, Scott J. Smallll, Larry J. Weber, Nathan C. Young

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Iowa Flood Center's automated real-time flood forecasting and information system serves as a complement to the National Water Center's proposed national system.

Measurements Of Dermal Uptake Of Nicotine Directly From Air And Clothing, G. Bekö, Glenn Morrison, C. J. Weschler, H. M. Koch, C. Pälmke, T. Salthammer, T. Schripp, J. Toftum, G. Clausen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this preliminary study, we have investigated whether dermal uptake of nicotine directly from air or indirectly from clothing can be a meaningful exposure pathway. Two participants wearing only shorts and a third participant wearing clean cotton clothes were exposed to environmental tobacco smoke (ETS), generated by mechanically "smoking" cigarettes, for three hours in a chamber while breathing clean air from head-enveloping hoods. The average nicotine concentration (420 μg/m3) was comparable to the highest levels reported for smoking sections of pubs. Urine samples were collected immediately before exposure and 60-hour post-exposure for bare-skinned participants. For the clothed participant, post-exposure urine …

Biotransformation Of 2,4-Dinitroanisole By A Fungal Penicillium Sp, Hunter W. Schroer, Kathryn L. Langenfeld, Xueshu Li, Hans Joachim Lehmler, Craig L. Just

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Insensitive munitions explosives are new formulations that are less prone to unintended detonation compared to traditional explosives. While these formulations have safety benefits, the individual constituents, such as 2,4-dinitroanisole (DNAN), have an unknown ecosystem fate with potentially toxic impacts to flora and fauna exposed to DNAN and/or its metabolites. Fungi may be useful in remediation and have been shown to degrade traditional nitroaromatic explosives, such as 2,4,6-trinitrotoluene and 2,4-dinitrotoluene, that are structurally similar to DNAN. In this study, a fungal Penicillium sp., isolated from willow trees and designated strain KH1, was shown to degrade DNAN in solution within 14 days. …

The Bridge Newsletter Spring 2017, Missouri University Of Science And Technology

The Bridge Newsletter

-Bayless retires
-Lifesaving flood relief
-Asphalt expert joins S&T
-First Prakash Lecture

Experimental Study On System Reliability Of Cold-Formed Steel Roof Trusses, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

This report presents a research project aimed at advancing the treatment of cold-formed steel (CFS) structural reliability in roof trusses. Structural design today relies almost exclusively on component-level design; so, structural safety is assured by limiting the probability of failure of individual components. Reliability of the entire system is typically not assessed, so in a worst-case scenario the system reliability may be less than the component reliability, or in a best-case scenario the system reliability may be much greater than the component reliability. A roof truss itself, is a subsystem with several possible failure modes that are being studied in …

Monotonic And Cyclic Response Of Single Shear Cold-Formed Steel-To-Steel And Sheathing-To-Steel Connections, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

Monotonic and cyclic backbone load-deformation response models for single shear steel-to-steel and plywood, oriented-strand board, and gypsum board sheathing to cold-formed steel screw-fastened connections are developed with support from an experimental program. Connection strength, stiffness, and the probability of screw shear failure are correlated to fastener bearing strength of the two connected plies. Cyclic strength and stiffness degradation was negligible. Cyclic excursions resulted in increased connection stiffness from the screw bearing hardening the ply material and locking in the plies.

Development Of Vegetation-Pervious Concrete In Grid Beam System For Soil Slope Protection, Xiaohua Bao, Wenyu Liao, Zhijun Dong, Shanyong Wang, Waiching Tang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

One of the most efficient and environmentally friendly methods for preventing a landslide on a slope is to vegetate it. Vegetation-pervious concretes have a promising potential for soil protection. In this study, the vegetation-pervious concrete with low alkalinity was developed and studied. Combined with a grid beam structure system, the stability and strength between the vegetation-pervious concrete and base soil are believed to be enhanced effectively. For improving plant adaptability, the alkalinity of concrete can be decreased innovatively by adding a self-designed admixture into the cement paste. The effects of the admixture content on alkalinity and compressive strength of the …

Development Of Structural-Functional Integrated Energy Storage Concrete With Innovative Macro-Encapsulated Pcm By Hollow Steel Ball, Hongzhi Cui, Waiching Tang, Qinghua Qin, Feng Xing, Wenyu Liao, Haibo Wen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Phase change materials (PCMs) have great potential for applications in energy efficient buildings. In this study, an innovative method of macro-encapsulation of PCM using hollow steel balls (HSB) was developed and the thermal and mechanical performance of PCM-HSB concrete was examined. The macro-encapsulation system (PCM-HSB) was attached with a metal clamp (c) for better mechanical interlocking with the mortar matrix. The latent heat of PCM-HSB-c that can be acquired is approximately 153.1 J/g, which can be considered to rank highly among PCM composites. According to the self-designed thermal performance evaluation, the PCM–HSB-c concrete panel is capable of reducing and deferring …

Inspire Newsletter Summer 2017, Missouri University Of Science And Technology. Inspire - University Transportation Center

INSPIRE Newsletters

No abstract provided.

Inspire Newsletter Winter 2017, Missouri University Of Science And Technology. Inspire - University Transportation Center

INSPIRE Newsletters

No abstract provided.

2017 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.

Linking A Dermal Permeation And An Inhalation Model To A Simple Pharmacokinetic Model To Study Airborne Exposure To Di(N-Butyl) Phthalate, Matthew Lorber, Charles J. Weschler, Glenn Morrison, Gabriel Bekö, Mengyan Gong, Holger M. Koch, Tunga Salthammer, Tobias Schripp, Jørn Toftum, Geo Clausen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Six males clad only in shorts were exposed to high levels of airborne di(n-butyl) phthalate (DnBP) and diethyl phthalate (DEP) in chamber experiments conducted in 2014. In two 6 h sessions, the subjects were exposed only dermally while breathing clean air from a hood, and both dermally and via inhalation when exposed without a hood. Full urine samples were taken before, during, and for 48 h after leaving the chamber and measured for key DnBP and DEP metabolites. The data clearly demonstrated high levels of DnBP and DEP metabolite excretions while in the chamber and during the first 24 h …

A Pore Water Pressure Diffusion Model To Predict Formwork Pressure Exerted By Freshly Mixed Concrete, Chan Kyu Park, Jae Hong Kim, Seong Ho Han

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The formwork pressure exerted by freshly mixed concrete is one of the most important considerations in ensuring the safety of construction in the field. The formwork pressure also affects the quality of concrete structures, determining the final shape of concrete members. Previous studies on the form pressure mostly investigated the intrinsic material effect. For example, the use of self-consolidating concrete increases the maximum pressure on the formwork. The extrinsic factor of a formwork system itself has rarely been considered. In the mockup tests and theoretical evaluations, it is identified that the bleed water-out controlled by the formwork tightness is critical. …

In-Situ Assessment Of Concrete Bridge Decks And Pavements Using Stress-Wave Based Methods, Mengxing Li

Doctoral Dissertations

"Concrete infrastructure of United States is aging and deteriorating. Accurate assessment the condition of concrete infrastructure is critical for its maintenance and rehabilitation. Stress-wave based methods, including ultrasonic surface wave (USW) and impact echo (IE), are becoming popular for characterizing defects and mechanical properties of concrete infrastructures. In this dissertation, a comprehensive literature review of seismic wave theory and common types of defects identified in concrete infrastructures, as well as stress-wave based methods used for concrete infrastructure monitoring and characterizing on a selected concrete bridge deck and two concrete pavement segments are present. The utility and reliability of both methods …

Novel Applications Of Pulse Pre-Pump Brillouin Optical Time Domain Analysis For Behavior Evaluation Of Structures Under Thermal And Mechanical Loading, Yi Bao

Doctoral Dissertations

"This study aims to: (1) develop an analytical model for the strain transfer effect of distributed fiber optic sensors in a uniform or non-uniform stress field; (2) develop a measurement approach to monitor strains in concrete and detect damage (e.g. crack and delamination) in bonded and unbonded concrete overlays; (3) characterize the strain and temperature sensitivities of distributed fiber optic sensors at elevated temperatures; (4) develop a thermal annealing approach to enhance the thermal stability and temperature sensitivity of the distributed sensors; and (5) apply the distributed sensors to assess structural behaviors of concrete and steel structures exposed to fire. …

High-Volume Recycled Materials For Sustainable Transportation Infrastructure, Seyedhamed Sadati

Doctoral Dissertations

"The objective of this study is to investigate the feasibility of using high performance concrete made with high-volume of recycled materials in transportation infrastructure. The main focus was to develop mixtures for rigid pavement construction. A variety of fine and coarse recycled concrete aggregates (RCA) were investigated. The feasibility of replacing 50% of Portland cement with industrial by-products and supplementary cementitious materials (SCMs) was also evaluated. Experimental program was conducted to quantify the effect of concrete mixture design and RCA characteristics on mechanical properties, drying shrinkage, cracking potential, and durability of concrete. The development of a database and analysis using …

Smart Rocks For Bridge Scour Monitoring -- Design And Localization Using Electromagnetic Techniques And Embedded Orientation Sensors, Andro Radchenko

Doctoral Dissertations

"River bridge scour is an erosion process in which flowing water removes sediment materials (such as sand, rocks) from a bridge foundation, river beds and banks. As a result, the level of the river bed near a bridge pier is lowering such that the bridge foundation stability can be compromised, and the bridge can collapse. The scour is a dynamic process, which can accelerate rapidly during a flood event. Thus, regular monitoring of the scour progress is necessary to be performed at most river bridges. Present techniques are usually expensive, require large man/hour efforts, and often lack the real-time monitoring …

Remote Sensing And Localization Of Smart Rocks With Orientation-Controlled Magnets For Real-Time Monitoring Of Bridge Scour And Riprap Effectiveness, Yan Tang

Doctoral Dissertations

"This study aims to develop and implement a novel smart rock technology for real-time monitoring of the maximum scour depth and the effectiveness of riprap mitigation measures. A smart rock is one or more stacked magnets encased in concrete that can automatically roll to the deepest point of a scour hole around a bridge pier and provide its location through remote measurement over time. Once integrated into a riprap measure, the smart rock moves together with natural rocks and is thus a potential indicator of the effectiveness of the riprap measure. Therefore, the localization and movement of smart rocks were …

Environmental Hazard Identification, Assessment And Control For A Sustainable Maritime Transportation System, Lizzette Marie Pérez Lespier

Doctoral Dissertations

"A demand exists to contribute towards the widening awareness of the need for sustainable maritime development and for coordinated maritime policies worldwide. Maritime shipping is considered the most eco-efficient mean of transportation and yet, is responsible for negative environmental impacts.

This dissertation focuses on developing data-driven decision support tools to evaluate the sustainable performance of MTS by focusing on the elements of the MTS that place stress on the environment. The first research contribution is a System Dynamics simulation model that examines the MTS resiliency after an extreme event and determines the sequence needed to restore the ocean-going port to …

Contributing Factors To Child Stunting In Guatemala: A Systems Analysis Focused On Enteric Disease Transmission And Mycotoxin Exposure, Lee Emerson Voth-Gaeddert

Doctoral Dissertations

"Child stunting -- low height-for-age -- is a United Nation's indicator for chronic malnutrition that has been linked to both acute and chronic health problems. Data from Guatemala suggests for children under five years of age, 49% are classified as stunted. This dissertation tests the following hypotheses, among children in Guatemala 1) environmental enteric dysfunction (EED) is correlated with height-for-age, 2) aflatoxin B (AFB) exposure is correlated with height-for-age, and 3) AFB exposure is correlated with EED. A network analysis was conducted on data from the US Agency for International Development (USAID) collected in 2012 to identify trends in a …

Durability Behavior Of Fiber Reinforced Polymer And Steel Reinforced Polymer For Infrastructure Applications, Wei Wang

Doctoral Dissertations

"Crack development in reinforced concrete (RC) structures is common in elements such as bridge decks. However, these cracks can impose significant problems over time, because they allow chlorides from deicing chemicals to infiltrate concrete which will then corrode steel bars as RC structures are exposed to harsh weather. In the last decade, composite reinforcement systems are internally or externally applied to concrete structures instead of traditional steel reinforcing bars, or to strengthen concrete elements in flexure and shear. However, studies regarding the long-term durability performance of composite reinforcement systems is limited. Therefore, in order to popularize the application of these …

Design And Performance Of Cost-Effective Ultra High Performance Concrete For Bridge Deck Overlays, Mahdi Valipour

Doctoral Dissertations

"The main objective of this research is to develop a cost-effective ultra-high performance concrete (UHPC) for bonded bridge deck overlays. The high durability and mechanical properties of such repair material can offer shorter traffic closures and prolong the service life of the pavement. The UHPC was optimized using supplementary cementitious materials (SCMs), proper combinations of sands, and adequate selection of fiber types and contents. Packing density studies included paste, sand, and fiber combinations. The robustness of optimized UHPC mixtures to variations of mixing and curing temperatures was examined. The efficiency of various shrinkage mitigation approaches in reducing autogenous and drying …

Long-Period Fiber Grating Corrosion Sensors For Life-Cycle Monitoring And Assessment Of Reinforced Concrete Structures, Yizheng Chen

Doctoral Dissertations

"This study aims to: (1) explore, develop, calibrate and validate Fe-C coated, long period fiber grating (LPFG) sensors for short-term mass loss measurement of the Fe-C coating; (2) develop, calibrate, and validate steel tube-encapsulated, fiber optic probes and LPFG sensors for long-term mass loss detection of the steel tube; (3) correlate the corrosion process of packaging metal materials with that of steel bars in direct contact with the packaged probe or sensor except for a thin insulation tape; and (4) apply both types of corrosion sensors into reinforced concrete (RC) structures for reinforcing bar corrosion monitoring and structural condition assessment. …

Towards A Better Understanding Of Indoor Exposure To Air Pollutants: Window Opening Occurrence In U.S. Residences, Gauri Dilip Date

Masters Theses

"Opening a window dramatically alters how we are exposed to air pollutants. Online questionnaire surveys were deployed to assess window-opening occurrence of the occupants of US homes. This information will be used to better quantify population exposure to pollutants of indoor and outdoor origin. Frequency distributions of demographics were generated which showed percentages of respondents who participated in the surveys from categories including gender, race, household income and occupancy. In April 2016, 49.3% of the people surveyed opened their windows for at least 1 hour in a day. This increased to 52.5% in September 2016 and reduced considerably to 24.4% …