Civil and Environmental Engineering Commons^™

Characterizing Wind-Wave Flow Physics And Loading Effects On Power Transmission Systems And Offshore Wind Turbines, Tianqi Ma

LSU Doctoral Dissertations

Recent extreme hurricanes caused extensive damage to critical civil infrastructure. Accurate modeling of the extreme complex wind fields and coupled wind-wave fields is essential to quantify the single wind or combined wind-wave loading effects on the structures. This research aims to characterize wind and wind-wave flow physics to quantify the loading effect on power transmission systems and offshore wind turbines.

First, a microscale (∼km) high-fidelity high-resolution computational model is developed to simulate hurricane wind fields with detailed physics. The generated wind field is applied to analyze the structural response of a power transmission system. The proposed hurricane boundary layer (HBL) …

Residential Building Flood Risk Assessment And The Benefits Of Home Elevation, Ayat Al Assi

LSU Doctoral Dissertations

Evaluating flood risk is an essential component of understanding and increasing community resilience. A robust approach for quantifying flood risk in terms of average annual loss (AAL) in dollars is needed to provide valuable information for stakeholder decision-making inside and outside the special flood hazard area (SFHA, which corresponds to the 100-year floodplain). To further inform flood mitigation strategies, quantifying flood risk reduction with home elevation above an initial first-floor height (FFH₀) and the cost effectiveness of federal mitigation assistance for elevation are important steps to enhance awareness of the effect of elevation in reducing flood risk. …

Automated Reinforcement In Construction 3d Printing: An Investigation Of Mechanical And Macrostructural Performance Of Reinforced 3d-Printed Structures, Hassan Ahmed

LSU Master's Theses

Conventional construction with steel reinforcement is widely accepted and utilized worldwide for its proven strength, durability, design flexibility, cost-effectiveness, and due to available standards and design codes. Integration of reinforcement in construction 3D printing, however, presents multi-faceted challenges that may influence the structural properties of printed components and have hindered the widespread adoption of reinforced 3D-printed structures. This study explored two complementary reinforcement techniques, namely, steel fibers and threaded reinforcement, to reinforce 3D-printed structures. This study explored both the fresh and hardened properties of 3D-printed mixtures that contain very high steel fiber dosages of up to 2.5% by volume. Additionally, …

Empowering Student Success: Unlocking The Potential Of Project-Based Steel Design Education, Aly Mousaad Aly

Faculty Publications

In the pursuit of student success, it is essential to acknowledge that a singular teaching style does not universally cater to all students. The educator's crucial role lies in creating an optimal learning environment that fosters students' endeavors to excel. This endeavor transcends mere classroom success or employment prospects, encompassing a broader impact on societal well-being. An experiential learning approach, where students actively engage in practical tasks, emerges as the most effective mode of instruction. Integrating project-based learning activities into the curriculum holds immense potential for enhancing student learning. Additionally, the utilization of analysis software tools like FTool and STAAD …

Alkali-Silica Reaction Mitigation Using Alternative Supplementary Cementitious Materials, Craig Newtson, Judit M. Garcia, Seyedsaleh Mousavinezhad

Data

Over the past few decades, Class F fly ash has been widely used in concrete as a supplementary cementitious material (SCM) due, in part, to its ability to mitigate alkali-silica reaction (ASR). However, future availability of fly ash is uncertain as the energy industry shifts towards renewable sources, resulting in the closure of coal-burning power plants. Therefore, there is a growing need to find alternatives to fly ash that are both cost effective and environmentally friendly. This study aimed to evaluate the effectiveness of ground-granulated blast furnace slag (GGBFS), metakaolin, and a locally available natural pozzolan mined from a pumicite …

Accelerated Sulfate Attack Testing For Concrete, Craig Newtson, Seyedsaleh Mousavinezhad, William Toledo, Federico Aguayo

Data

Extensive research has been conducted on sulfate attack of concrete structures, however, the need to adopt use of more sustainable materials is driving a need for a quicker test method to assess sulfate resistance. Class F fly ash, which is a byproduct of coal combustion for electricity generation, has historically been used in concrete mixtures to improve sulfate resistance. However, environmental considerations and evolving energy industry has decreased its availability, requiring the identification of economically viable and environmentally friendly alternatives to fly ash. Another challenge in addressing sulfate attack durability issues in concrete is that the standard sulfate attack test …

Alkali-Silica Reaction Mitigation Using Alternative Supplementary Cementitious Materials, Craig Newtson, Judit M. Garcia, Seyedsaleh Mousavinezhad

Publications

Over the past few decades, Class F fly ash has been widely used in concrete as a supplementary cementitious material (SCM) due, in part, to its ability to mitigate alkali-silica reaction (ASR). However, future availability of fly ash is uncertain as the energy industry shifts towards renewable sources, resulting in the closure of coal-burning power plants. Therefore, there is a growing need to find alternatives to fly ash that are both cost effective and environmentally friendly. This study aimed to evaluate the effectiveness of ground-granulated blast furnace slag (GGBFS), metakaolin, and a locally available natural pozzolan mined from a pumicite …

Accelerated Sulfate Attack Testing For Concrete, Craig Newtson, Seyedsaleh Mousavinezhad, William Toledo, Federico Aguayo

Publications

Extensive research has been conducted on sulfate attack of concrete structures, however, the need to adopt use of more sustainable materials is driving a need for a quicker test method to assess sulfate resistance. Class F fly ash, which is a byproduct of coal combustion for electricity generation, has historically been used in concrete mixtures to improve sulfate resistance. However, environmental considerations and evolving energy industry has decreased its availability, requiring the identification of economically viable and environmentally friendly alternatives to fly ash. Another challenge in addressing sulfate attack durability issues in concrete is that the standard sulfate attack test …

Remote Sensing And Artificial Intelligence-Based Modeling And Prediction Of Harmful Algal Blooms In Lake Pontchartrain, Ian Smith

LSU Master's Theses

Harmful Algal Blooms (HABs) and particularly toxic cyanobacterial harmful algal blooms (CyanoHABs) have become a growing threat to the environment, economy, communities, and human and animal health. This is particularly true for Lake Pontchartrain. Forecasting the occurrence of cyanobacterial HABs in Lake Pontchartrain is a process that currently does not exist, as nowcasting by the NCCOS Algal Bloom Monitoring System or the similar system implemented by the U.S. EPA is currently the only method to monitor HAB production in the Lake. This thesis made this process possible by identifying antecedent environmental conditions controlling CyanoHABs, describing the conditions using NASA satellite …

Ecological Validity Of Immersive Virtual Environment Experiments On Human Thermal State And Behavioral Intentions: Experimental Protocol Factors, Girish Rentala

LSU Doctoral Dissertations

Using immersive virtual environment (IVE) based experiments to investigate human thermal states and thermal adaptive behaviors during the building design phase could help identify potential comfort issues and enable designers to optimize building performance cost-effectively before the actual building construction. However, to effectively utilize IVEs to study thermal states/adaptive behaviors, it is crucial to ensure the ecological validity of IVE experiment protocols. This entails accurately representing in-situ (real) environments within IVEs and establishing comparability and generalizability of data collected under different thermal stimuli between IVE and in-situ environments. Existing thermal stimuli based IVE studies have not effectively evaluated the ecological …

Behavioral Comparison Of Fluorescent Tracer Sediment To Lightweight Polystyrene Sediment Of The Lower Mississippi River Physical Model (Lmrpm), Julia C. Mudd

LSU Master's Theses

A lightweight, unexpanded polystyrene sediment with a specific gravity of 1.05 and a D10, D50 and D90 of 0.250 mm, 0.425mm, and 0.800 mm, respectively, is utilized in the Lower Mississippi River Physical Model (LMRPM) at Louisiana State University to mimic the sand transport of the Lower Mississippi River. While the black model sediment is easily visible against the stark white of the LMRPM, the relative homogeneity of the sediment particles and the opaqueness of the model channel make it difficult to closely study sediment dynamics during an experiment. For this reason, a tracer sediment that is marked with fluorescence …

Exploring Machine Learning In Deep Foundation And Soil Classification Application, Mohammad Moontakim Shoaib

LSU Master's Theses

The applicability of several Machine Learning (ML) models was explored in this research to predict the ultimate capacity and load-settlement behavior of axially loaded single-driven piles from Cone Penetration Test (CPT) data. Additionally, a common CPT-based soil behavior type (SBT) classification system was reproduced using those ML models. Eighty static pile load tests and corresponding CPT data close to those pile locations were collected from 34 sites in Louisiana for the deep foundation application. On the other hand, 70 CPT soundings were taken in 14 different parishes across Louisiana for the soil classification application. Specifically, tree-based ML models such as …

Optimization Of The Self-Healing Efficiency Of Bacterial Concrete Using Impregnation Of Three Different Precursors Into Lightweight Aggregate, Omar Omar

LSU Master's Theses

Concrete is the most broadly used construction material; thus, developing sustainable concrete is essential to decrease greenhouse gas (GHG) emissions from concrete production. Implementation of self-healing concrete technologies is a promising approach to enhance the durability and sustainability of the transportation infrastructure. Among these technologies, bacterial concrete has the potential to seal microcracks through microbial induced calcite precipitation (MICP). Bacterial protection is essential to ensure the viability of this technology due to concrete’s harsh environment. Additionally, the success of this technology depends on the presence of an adequate mineral precursor compound and nutrient for the bacteria. As such, the main …

Removal Of Radionuclides Using Capacitive Deionization, Yusik Won

LSU Doctoral Dissertations

Severe nuclear accidents, including the Fukushima nuclear power plant accident, can lead to the discharge of large amounts of radionuclides into aquatic environments. Some radionuclides such as ¹³⁷Cs and ⁹⁰Sr have long half-lives and can remain in the environment for a long period of time. These radionuclides can be detrimental to humans and the environments because they can cause human and environmental exposure to ionizing radiation and because they can be bioaccumulated and biomagnified. Therefore, in case of a severe accident and a radioactive spill, it is important to quickly clean up and treat radioactively contaminated water to …

Calibration And Use Of S3f Sensor For Normal And Shear Stress Measurements In Soil, Hussein Alqrinawi

LSU Master's Theses

Innovative sensors can provide new capabilities to monitor and understand the behavior of soil, rock, and geo-structures and help geotechnical engineers make informed decisions about the construction and maintenance of geo-structures. This study introduced, calibrated, and validated one such sensor, the Surface Stress Sensitive Film (S3F) point sensor, for both normal and shear stress measurements in soil along the soil-structure interface. The measurements of S3F sensor rely on the deformation of an elastic film that is monitored by a floating element embedded in the elastic film. This sensor provides measurements of the 3D deformation of the film which are converted …

Numerical Flume For Wave Dissipation By Mangrove Prop Roots, Rebecca L. Schurr

LSU Master's Theses

Mangroves provide shorelines with many beneficial engineering services, including shoreline stabilization, wave attenuation, and damage mitigation during tsunami or tropical cyclone events. This research focuses on wave attenuation rates and drag coefficients, and how they are affected by mangrove prop roots. Previous lab research using a physical wave flume has quantified wave height decay and drag coefficients for synthetic mangrove forests and confirmed that attenuation does indeed increase as mangrove forest density increases. This research will use a 3D numerical flume model developed in Proteus, a Python package, to simulate prior physical model experiments. This work will attempt to validate …

Examining The Impact Of Different Street Lighting Schemes On Traffic Safety And Drivers’ Behaviors At Unsignalized Intersections, Hisham Mohamed Abdu Kunnah

LSU Master's Theses

Lack of visibility is one of the main challenges that significantly impact drivers’ ability to safely perform driving tasks at night especially at unsignalized intersections. Several prior studies indicated that lighting enhances nighttime traffic safety. Nevertheless, lighting is not mandatory at unsignalized intersections in many states including Louisiana. This study aimed to investigate if lack of lighting is a contributing factor that affects traffic safety at unsignalized intersections in Louisiana. In addition, this study strived to identify current lighting policies adopted by other states, examine if there are any low-cost countermeasures implemented by other states to improve nighttime visibility, and …

Characterizing And Modeling The Impact Photorepair Conditions Have On Parameters Governing The Regrowth Of Escherichia Coli After Uvc Irradiation, And Investigating Potential Mitigation Strategies, Andrea J. Martinez Ballen

LSU Master's Theses

Ultraviolet disinfection has been used to treat water and wastewater for decades. Previous studies highlight the significance of disinfection conditions and attempt to model bacterial regrowth behavior according to disinfection dosing parameters. The emergence of light-emitting diode (LED) technology provides the ability to further explore bacterial repair methods after UV disinfection, which has been a growing concern within the UV community. However, it is necessary to also consider post-disinfection conditions to model the regrowth patterns of bacterial organisms more accurately. By varying reactivation wavelengths, and their respective intensities, experiments using Escherichia coli ATCC 15597 revealed how these parameters impact the …

Physics-Based Crystal Plasticity Model For Predicting Microstructure Evolution And Dislocation Densities, Juyoung Jeong

LSU Doctoral Dissertations

This work presents three different studies investigating plastic deformation mechanisms in metals and alloys using crystal plasticity finite element (CPFE) modeling. The first study presents a new nonlocal crystal plasticity model for face-centered cubic single crystals under heterogeneous inelastic deformation. The model incorporates generalized constitutive relations that incorporate the thermally activated and drag mechanisms to cover different kinetics of viscoplastic flow in metals and describes the plastic flow and yielding of single-crystals using dislocation densities. The model is compared to micropillar compression experiments for copper single crystals and clarifies the complex microstructural evolution of dislocation densities in metals. The second …

Motivators And Preferences Of Route Diversion During Roadway Incidents, Grace Cole

LSU Master's Theses

When confronted with congestion and delay, drivers often divert their route. Depending on factors like purpose, urgency, destination, route alternatives, type of disruption, and mode options, common diversionary options can range from changing departure time, route, and mode to canceling a trip altogether. One of the foundational building blocks of travel forecasting is traffic assignment, which is used to distribute trips over a network using complex algorithms to aggregately represent the desire of drivers to minimize travel time.

While these assignment models are backed by decades of research and observational experience, they are also limited by the fact that they …

A New Generation Of Dense-Graded Asphalt Mixtures With Superior Performance Against Stripping And Moisture Damage, Mostafa Elseifi, Zahid Hossain, Md. T.A Sarkar, Hossam Abohamer, Mohammad Oyan

Data

The presence of moisture beneath the pavement surface is a matter of great concerns as it is responsible for significant distresses such as asphalt concrete (AC) stripping, fatigue cracking, rutting, and poor durability of asphalt mixes. The objective of this study was to evaluate and recommend an asphalt mixture design that would provide superior performance against AC stripping and cracking. To achieve this objective, a laboratory test factorial was developed to evaluate the use of nanomaterials, emerging anti-stripping agents, warm-mix asphalt technologies, and adhesion promotors. In the experimental program, the modified Lottman test (AASHTO T 283) and the Indirect Tensile …

A New Generation Of Dense-Graded Asphalt Mixtures With Superior Performance Against Stripping And Moisture Damage, Mostafa Elseifi, Zahid Hossain, Md. T.A. Sarkar, Hossam Abohamer, Mohammad Oyan

Publications

The presence of moisture beneath the pavement surface is a matter of great concerns as it is responsible for significant distresses such as asphalt concrete (AC) stripping, fatigue cracking, rutting, and poor durability of asphalt mixes. The objective of this study was to evaluate and recommend an asphalt mixture design that would provide superior performance against AC stripping and cracking. To achieve this objective, a laboratory test factorial was developed to evaluate the use of nanomaterials, emerging anti-stripping agents, warm-mix asphalt technologies, and adhesion promotors. In the experimental program, the modified Lottman test (AASHTO T 283) and the Indirect Tensile …

Anaerobic Toluene Biodegradation Potential At A Superfund Site Where Toluene Biosynthesis Was Observed, George Carson

LSU Master's Theses

At a Superfund site near Baton Rouge, LA, the subsurface injection of molasses has been used to stimulate anerobic reductive dechlorination of halogenated organic compounds (e.g., 1,2-dichloroethane and vinyl chloride) present in the groundwater. Following some molasses injections, temporary accumulation of toluene and p-cresol was observed in the groundwater. Accumulation of these aromatic hydrocarbons, which were not detected in the molasses, has been attributed to anaerobic biotransformation of the amino acids phenylalanine and tyrosine. Experiments reported here were conducted in support of an effort to determine if toluene biodegrading bacteria were present in the area where anaerobic toluene accumulation was …

Comparative Analysis Of 3d Printed Bridge Construction In Louisiana, Amirhosein Jafari, Ali Kazemian, Sarah Ataei

Data

A construction 3D printing system could result in automated infrastructure development at reduced cost and time, significantly boosting overall productivity. Although there has been a growing interest in using construction 3D printing for projects such as house construction, implementing this innovative technology for infrastructure development, particularly bridge construction, has not been investigated as extensively. This study aims to compare the environmental impact of precast and 3D concrete printing (3DCP) techniques with a pedestrian bridge case study, located in Louisiana, where the bridge elements were 3D printed off-site and then transported and assembled on the bridge site. A detailed cradle-to-site life …

Comparative Analysis Of 3d Printed Bridge Construction In Louisiana, Amirhosein Jafari, Ali Kazemian, Sarah Ataei

Publications

A construction 3D printing system could result in automated infrastructure development at reduced cost and time, significantly boosting overall productivity. Although there has been a growing interest in using construction 3D printing for projects such as house construction, implementing this innovative technology for infrastructure development, particularly bridge construction, has not been investigated as extensively. This study aims to compare the environmental impact of precast and 3D concrete printing (3DCP) techniques with a pedestrian bridge case study, located in Louisiana, where the bridge elements were 3D printed off-site and then transported and assembled on the bridge site. A detailed cradle-to-site life …

Development Of Ultra-High Performance Engineered Geopolymer Composites (Uhp-Egcs), Hassan Noorvand, Miladin Radovic, Marwa Hassan, Svetlana Sukhishvili, Gabriel Arce, Ruwa Abufarsakh, Adriana A. Alvarado, Oscar Huang, Sang Zhen

Data

This study investigated the possibility of developing novel UHP-EGC materials for the repair and new construction of transportation infrastructure in Region 6 by utilizing locally available resources. To this end, the geopolymers (GPs) in this study were synthesized by activating metakaolin (MK) with potassium silicate and sodium silicate solutions. The solutions were manufactured in the laboratory by dissolving silica fume and potassium hydroxide (KOH) or sodium hydroxide (NaOH) in deionized water. MK-based GP binders, mortars, and fiber-reinforced composites were manufactured and evaluated to determine their density, compressive strength, tensile properties, and slant shear bond strength to Portland cement concrete (PCC). …

Development Of Ultra-High Performance Engineered Geopolymer Composites (Uhp-Egcs), Hassan Noorvand, Miladin Radovic, Marwa Hassan, Svetlana Sukhishvili, Gabriel Arce, Ruwa Abufarsakh, Adriana A. Alvarado, Oscar Huang, Sang Zhen

Publications

This study investigated the possibility of developing novel UHP-EGC materials for the repair and new construction of transportation infrastructure in Region 6 by utilizing locally available resources. To this end, the geopolymers (GPs) in this study were synthesized by activating metakaolin (MK) with potassium silicate and sodium silicate solutions. The solutions were manufactured in the laboratory by dissolving silica fume and potassium hydroxide (KOH) or sodium hydroxide (NaOH) in deionized water. MK-based GP binders, mortars, and fiber-reinforced composites were manufactured and evaluated to determine their density, compressive strength, tensile properties, and slant shear bond strength to Portland cement concrete (PCC). …

Numerical Investigation Of Heat Generation And Accumulation Contributing To Elevated Temperature In Msw Landfills, Alborz Fathinezhad

LSU Doctoral Dissertations

Landfills are complex geostructures which contains organic and inorganic municipal, and in some cases industrial, wastes and are expected to remain operational for long times. Due to the complex nature of physical, chemical, biological, and thermal reactions that carry on within the depths of a landfill, unexpected incidents such as elevated temperatures could become inevitable. While uncommon to happen, elevated temperatures cause health and environmental issues such as odors, rapid settlements, slope instabilities. In addition, elevated temperatures can negatively impact engineered components in composite bottom liners, cover systems, leachate collection, and gas extraction and recovery systems.

Air intrusion into municipal …

Toward A Safer Transportation System For Senior Road Users, Saba Doulabi

LSU Doctoral Dissertations

Senior pedestrians and drivers (65 years and older) are among the most vulnerable road users. As the population of seniors rise, concerns regarding older adults' traffic safety are growing. The advantages of using autonomous vehicles, innovative vehicle technologies, and active transportation are becoming more widely recognized to improve seniors' mobility and safety. This behooves researchers to further investigate senior road users’ safety challenges and countermeasures. This study contributes to the literature by achieving two main goals. First, to explore contributing factors affecting the safety of older pedestrians and drivers in the current transportation system. Second, to examine seniors’ perceptions, preferences, …

Interactive Industrial Energy Assessment Learning Platform Using 360-Degree Virtual Reality Contents, Laleh Ghanbari

LSU Doctoral Dissertations

The traditional passive industrial energy assessment training methods included low direct involvement of students, and they lacked an engaging learning environment. Since the main task for energy assessment is visual inspection and data collection, traditional passive training methods were not able to provide hands-on experience for the students. An active training method was needed to make the current industrial energy assessment training more efficient and effective, a method which provides the opportunity for students to have more interaction with the training environment. In this study, an interactive industrial energy assessment learning platform using 360ᵒ virtual reality contents was developed. The …