Open Access. Powered by Scholars. Published by Universities.®

Civil and Environmental Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Clemson University

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 61 - 90 of 654

Full-Text Articles in Civil and Environmental Engineering

Nlp-Based Quantitative Methods For Measuring Highway Project Similarity To Support Project Clustering And Bundling, Quan Do Dec 2024

Nlp-Based Quantitative Methods For Measuring Highway Project Similarity To Support Project Clustering And Bundling, Quan Do

All Dissertations

State highway agencies (SHAs) often need to classify similar projects into distinct work type clusters, enabling them to correlate new projects with historical data on cost, schedule, pay item production rates, and project complexity. This classification also facilitates the identification of similar projects for project bundling. However, the conventional method for classifying projects into work types is inefficient, relying heavily on subjective judgment and manual review of project scope. This inefficiency hinders SHAs’ ability to effectively apply knowledge gained from historical projects to future projects. Moreover, the subjective nature of project classification is time-consuming and can result in inconsistencies and …


Life Cycle Assessment Approach For Energy Usage In Animal Rendering Plants, Abel Binoy Mathew Dec 2024

Life Cycle Assessment Approach For Energy Usage In Animal Rendering Plants, Abel Binoy Mathew

All Theses

The animal rendering industry plays a crucial role in transforming waste products from livestock production and meat processing facilities into valuable and economically beneficial products, promoting both resource efficiency and sustainability. This study uses a life cycle assessment (LCA) approach to evaluate energy usage and greenhouse gas emissions in animal rendering plants, focusing on electricity and natural gas as the main energy inputs for plant operation. This research examines three distinct rendering facilities, each processing different raw materials, to quantify the environmental impacts of rendering operations. Site visits, data collection, and real-time monitoring were used to capture energy use across …


Microbial-Chemical Degradation Of Styrene In Co-Mingled Plumes With Ethylbenzene, Benzene, And Carbon Tetrachloride, Marcela C. Flórez-García Dec 2024

Microbial-Chemical Degradation Of Styrene In Co-Mingled Plumes With Ethylbenzene, Benzene, And Carbon Tetrachloride, Marcela C. Flórez-García

All Theses

Industrial sites contaminated with a complex matrix of chemicals represent a problem for the ecosystem and a high risk for the health of all individuals. That is why remediation strategies are needed to mitigate this environmental impact. The latex zone, located at the Corteva industrial site in San Lorenzo, Argentina, is the subject of this research. The environmental impacts in this area are a consequence of petrochemical operations carried out for many years.

Monoaromatic hydrocarbons such as styrene, ethylbenzene, and benzene, and chlorinated methanes like carbon tetrachloride, chloroform, dichloromethane, and chloromethane are among the contaminants identified at the site that …


Supporting Holistic, Informed, Decision-Making Through The Complementarity Of Life Cycle Assessment And Radiological Protection, Bryanna Wattier-Weisensee Dec 2024

Supporting Holistic, Informed, Decision-Making Through The Complementarity Of Life Cycle Assessment And Radiological Protection, Bryanna Wattier-Weisensee

All Dissertations

Decision making is challenging and it is necessary to consider all relevant data to make an informed decision. The work herein provides a pathway wherein the fields of radiological protection and life cycle assessment (LCA) can be utilized synergistically to benefit the decision-making using the other (and vice versa). Specifically, LCA parallels decision-aiding techniques used in the optimization of radiological protection and LCA includes an ionizing radiation potential (IRP) impact category wherein the impacts associated with an emission of radioactive material is quantified to determine the human health impact. Thus this body of work focuses on (1) expanding the platform …


Trust: The Inertia Taxonomy Of Trust And Learning Outcomes Of Trust Building Exercises, Ann B. Lyons Aug 2024

Trust: The Inertia Taxonomy Of Trust And Learning Outcomes Of Trust Building Exercises, Ann B. Lyons

All Theses

This study investigates United States construction professionals’ view of trust in the workplace. In particular the focus is on building trust through trust building exercises. In order to accomplish this, a literature review was conducted focusing on trust in the worldwide construction industry. This was followed by interviews with US construction professionals who focus on team building. These interviews informed a survey sent to a wide variety of US construction professionals. The survey had two sections of content questions, 1. view of trust indicators and 2. perception of trust building exercises. Finally, experts in the field of construction team building …


Extraction Of Neutron-Gamma Irradiated Diffusion Pump Oils, Cooper L. Tillman Aug 2024

Extraction Of Neutron-Gamma Irradiated Diffusion Pump Oils, Cooper L. Tillman

All Theses

This work successfully demonstrates solvent extraction methods for separation of oil from the by-products when two commercially available vacuum pump oils were exposed to an intense neutron and gamma-ray radiation environment. Nuclear fusion power at a commercial scale has accelerated the need for radiation resistant vacuum technology, such as oil-based diffusion pumps. Polyphenyl ether and aromatic silicone oils were irradiated at the Rhode Island Nuclear Science Center (RINSC) up to MGy absorbed doses with neutron and gamma-ray radiation. Solvent extractions were performed using hexane and isopropanol to characterize the oil extraction as a function of total absorbed dose. The by-products …


Hydrogen Isotope Exchange On Diffusion Pump Oils, Carson G. Allen Aug 2024

Hydrogen Isotope Exchange On Diffusion Pump Oils, Carson G. Allen

All Theses

The extent of isotopic exchange of deuterium and tritium with protium atoms in hydrocarbon pump oil was investigated as a means to quantify the chemical stability of a mineral oil, a silicone oil, and a polyphenyl ether oil as candidates for implementation in a diffusion pump. In its target application at a fusion power plant, a chemically stable and radiation hard oil offers substantial reductions in tritium inventory, electrical consumption, and operational pump expenses over alternate solutions for vacuum induction. Select oils were introduced to deuterium and tritium isotopes in a high temperature environment, analogous to an operating vacuum pump. …


Degradation Products And Microbial Communities Associated With The Conversion Of Five Long-Chain Fatty Acids Relevant For Anaerobic Co-Digestion Of Fog With Sludge, Claire Funk Aug 2024

Degradation Products And Microbial Communities Associated With The Conversion Of Five Long-Chain Fatty Acids Relevant For Anaerobic Co-Digestion Of Fog With Sludge, Claire Funk

All Theses

Anaerobic digestion is a technology that allows wastewater treatment plants to convert sludge to energy by recovering the biogas produced during the breakdown of proteins, carbohydrates, and lipids. Furthermore, adding fats, oils, and greases (FOG) through co-digestion with wastewater sludge can increase energy production as lipids have a higher methane yield than proteins and carbohydrates. However, adding FOG can also lead to operational problems in the digester due to the potential accumulation of certain long-chain fatty acids (LCFAs). Current research is limiting in the degradation pathways of prominent LCFAs in FOG and the microbial communities responsible for their degradation

The …


Proportioning And Performance Of Ultra-High Performance Concrete (Uhpc) For High Friction Surface Treatment (Hfst) On Pavement And Bridge Decks, Adam R. Biehl Aug 2024

Proportioning And Performance Of Ultra-High Performance Concrete (Uhpc) For High Friction Surface Treatment (Hfst) On Pavement And Bridge Decks, Adam R. Biehl

All Theses

High Friction Surface Treatment (HFST) is a roadway remediation technique used to improve pavement’s coefficient of friction, to enhance roadway safety. The application of HFSTs has repeatedly demonstrated the ability to significantly reduce crashes in both wet and dry conditions. Typically, epoxy-resins and calcined bauxite aggregate are used in HFST treatment. However, the high material costs and scarcity of calcined bauxite render this form of HFST an expensive and limited option for roadway rehabilitation. Therefore, the identification of alternative binders and HFST aggregates is needed for broad scale implementation. One potential alternative binder is Ultra-High-Performance Concrete (UHPC), a specialty cementitious …


Advancing Unmanned Ground Vehicle Path Planning With Quantified Map Uncertainty, Israel Afriyie Aug 2024

Advancing Unmanned Ground Vehicle Path Planning With Quantified Map Uncertainty, Israel Afriyie

All Theses

This thesis addresses the complex challenge of path planning for Unmanned Ground Vehicles (UGVs) in areas where traditional navigation systems are inadequate, such as unstructured or off-road military zones. Recognizing the limitations of current path planning algorithms, which primarily focus on optimizing for the shortest path and often fail to account for variability and risks, this research proposes an enhanced Hyperstar algorithm. This approach not only considers the fastest route but also integrates maximum delays and visibility risks into its computation, ensuring a balance between swift mission completion and concealment from adversaries.

Utilizing terrain maps and incorporating uncertainties in map …


Ultra High-Performance Concrete As A High Friction Surface Treatment For Pavements And Bridges, Kyle Maeger Aug 2024

Ultra High-Performance Concrete As A High Friction Surface Treatment For Pavements And Bridges, Kyle Maeger

All Dissertations

High Friction Surface Treatment (HFST) is a proven technology to reduce crashes on roadways by increasing the coefficient of friction between vehicle tires and the pavement. However, it is an expensive solution due to the high cost of the two commonly used constituent materials, calcined bauxite aggregate and epoxy resin binders.

This study evaluated the abrasion resistance performance of four alternative HFST aggregates to calcined bauxite using Los Angeles Abrasion and Micro-Deval Abrasion tests, and studied the surface texture utilizing a high-resolution laser scanner and friction utilizing the British Pendulum Test.

This study also assessed the performance of non-proprietary Ultra …


Integrating Artificial Intelligence And Augmented Reality For Enhanced Task Performance In The Construction Industry, Aasish Chandrika Bhanu Aug 2024

Integrating Artificial Intelligence And Augmented Reality For Enhanced Task Performance In The Construction Industry, Aasish Chandrika Bhanu

All Dissertations

The Architecture, Engineering, and Construction (AEC) sector, characterized by its complex tasks, often faces challenges in adopting cutting-edge technologies, a trend that can significantly hinder productivity improvements compared to other industries. This dissertation explores the emerging integration of Artificial Intelligence (AI) and Augmented Reality (AR) within the AEC domain, investigating how effectively this can be implemented to potentially revolutionize industry practices. AI could be used in the AEC domain for advanced analytical and decision-making processes, while AR could be used for training, visualization, and remote collaboration.

In scenarios where construction site workers require expert guidance, these technologies could be helpful. …


Base Case Shear-Wave Velocity Profiles And Non-Linear Material Property Models Of Local Site Conditions In South Carolina For Seismic Site Response Analyses, Ali Sedaghat Shirehjini Aug 2024

Base Case Shear-Wave Velocity Profiles And Non-Linear Material Property Models Of Local Site Conditions In South Carolina For Seismic Site Response Analyses, Ali Sedaghat Shirehjini

All Dissertations

This dissertation presents the development of base case small-strain shear-wave velocity ( ) profiles and non-linear materials property models of local site conditions in South Carolina for seismic site response analyses. The need to address South Carolina's seismic hazards is partly motivated by the 1886 Charleston earthquake (moment magnitude, Mw= 6.7 to 7.5). Required inputs for seismic site response analysis include profile down to a specified reference outcrop condition and non-linear material properties for each layer in the profile. Although firm rock (i.e., ≥ 2,500 ft/s) or hard rock (i.e., ≥ 9,850 ft/s) is commonly assumed for the …


An Emergency Response System To Assist The Movement Of Vehicles During Emergency Operations In Urban Transportation Networks, Jamal Nahofti Kohneh Aug 2024

An Emergency Response System To Assist The Movement Of Vehicles During Emergency Operations In Urban Transportation Networks, Jamal Nahofti Kohneh

All Dissertations

Emergency responders need to arrive at the emergency scene as soon as possible, but operating vehicles under emergency conditions can pose a risk to both the responders and other road users, potentially resulting in crashes or delays in emergency operations. In this research, an emergency response system is proposed to assist emergency and non-emergency response vehicles (ERVs and non-ERVs) during emergency operations in a connected vehicle environment. This system collects the information from connected ERVs and non-ERVs, utilizes this information as inputs in the proposed models, and sends instruction messages back to vehicles. The proposed models provide the fastest ERV …


The Development Of A Convenient And Consistent Methodology For Flight Proficiency To Certify Multi-Rotor Uas Pilots For State Departments Of Transportation, Colin Dees May 2024

The Development Of A Convenient And Consistent Methodology For Flight Proficiency To Certify Multi-Rotor Uas Pilots For State Departments Of Transportation, Colin Dees

All Dissertations

To fly an unmanned aircraft system (UAS), commonly referred to as a “drone,” the Federal Aviation Administration (FAA) requires pilots to pass a knowledge test. There is no requirement at the state or federal level for drone operators to demonstrate the ability to operate a UAS. The National Institute of Science and Technology (NIST) has created an exam for public and private entities to assess basic UAS flight proficiency. It is the only nationally recognized flight proficiency protocol. NIST does not provide a scoring recommendation and leaves it to the user to determine the minimum criteria to pass. There is …


Engineering Sustainable Bridge Deck Rehabilitation: Evaluating Mechanical And Electro-Chemical Properties Of Rapid-Set Patching Materials And Their Influence On Repair Durability, James Roberts May 2024

Engineering Sustainable Bridge Deck Rehabilitation: Evaluating Mechanical And Electro-Chemical Properties Of Rapid-Set Patching Materials And Their Influence On Repair Durability, James Roberts

All Theses

As the state of the US infrastructure continues to deteriorate over time, a prominent issue especially in the field of reinforced concrete structures has been the ability to properly rehabilitate and extend the design service life of these structures. A majority of our existing reinforced concrete bridges were built in the construction boom during the 60’s, 70’s and 80’s, and were originally designed with a service life of approximately 50 years, thus showing that many structures are close to or have already exceeded their intended service life. Additionally, with a poor history of government infrastructure funding, it is seen to …


Dynamics Of Link Importance Across Flood Disaster Phases And Flood Impacts On Operation Of An Industry, Navin Bhatta May 2024

Dynamics Of Link Importance Across Flood Disaster Phases And Flood Impacts On Operation Of An Industry, Navin Bhatta

All Theses

Transportation damage and disruptions will become increasingly common as the frequency of floods increases due to climate change. Given the size and cost of the transportation network construction, communities' mitigation measures should be supported by evaluations that cover both normal and disaster management phases. This thesis examines the criticality of road segments in the normal, flood response, and recovery phases, considering the effects on emergency services, healthcare, industry, education, recreation, and transit and analyses that whether a flood disrupts the operational trips of a company in Anderson County, South Carolina. A 100-year event and a 500-year flood event provides context …


Quantifying Hurricane Effects On Housing: Evaluating Damage, Loss, And Shelter Demands Using Historical And Simulated Storm Tracks, Adish Deep Shakya May 2024

Quantifying Hurricane Effects On Housing: Evaluating Damage, Loss, And Shelter Demands Using Historical And Simulated Storm Tracks, Adish Deep Shakya

All Theses

This research introduces an advanced framework which employs parametric wind field models for peak wind speeds, and building fragility curves, loss functions, and demographic data to estimate for estimating housing damage and loss. The uninhabitable units immediate displaced households, short-term and long-term shelter need households are determined. with a particular focus on those eligible for FEMA assistance. The framework's validity is reinforced by a high correlation in the analysis of recent hurricane events between estimated numbers of displaced households and actual FEMA aid recipients, where FEMA aids about 20-60% of the predicted long-term displaced households. A novel application of the …


Analytical And Experimental Studies To Support Codification Of Lightweight Grout For Masonry Design, Cooper Banks May 2024

Analytical And Experimental Studies To Support Codification Of Lightweight Grout For Masonry Design, Cooper Banks

All Theses

Lightweight (LW) aggregates have many potential benefits in masonry construction including minimizing mass, improving thermal performance, and reducing the potential for shrinkage cracking via internal curing. The current masonry design standard, TMS 402/602-22, permits lightweight aggregate in the production of concrete masonry units (CMU), but there has been insufficient testing of masonry assemblies to permit designing with LW grout. Shrestha et al. characterized LW grouts bond to reinforcement, shear strength, tension and shear pullout behavior of anchors and proposed possible reduction factors for design. Hiner characterized the flexural bond strength LW grouted masonry assemblies and proposed possible reduction factors for …


Development And Evaluation Of An Arsenic Transport Model For The Maurice River Watershed, Christina Eddleman May 2024

Development And Evaluation Of An Arsenic Transport Model For The Maurice River Watershed, Christina Eddleman

All Theses

For many Superfund sites across the United States, arsenic is one of the most common contaminants of concern that must be cleaned up to protect human and environmental health. Past research and health studies have documented the harmful effects of inorganic arsenic on humans and the environment but selecting an appropriate remediation plan depends on several site-specific factors at each Superfund site. To assist in determining an appropriate remediation plan, sediment and contaminant transport models have been used to simulate the transport of arsenic and other contaminants of concern at contaminated sites to, e.g., make relative comparisons of the efficacy …


Laboratory Evaluation Of Remediation Alternatives For Groundwater At The Lane Street Superfund Site, Alyssa Costello May 2024

Laboratory Evaluation Of Remediation Alternatives For Groundwater At The Lane Street Superfund Site, Alyssa Costello

All Theses

At the Lane Street Groundwater Contamination Superfund site in Elkhart, Indiana, which includes industrial, commercial, and residential properties, a plume of contaminated groundwater was identified that requires remediation. The plume is chiefly composed of trichloroethylene (TCE) and has impacted residents’ drinking water. A microcosm study was performed to evaluate the potential of various treatment methods to remediate the Lane Street Superfund Site groundwater. The objectives of this microcosm study are to evaluate the potential for biostimulation, bioaugmentation, and abiotic degradation for implementation at this Site and to evaluate toxicity factors that have precluded natural degradation of the site contaminants. The …


Evaluating Company Culture Of Roofing Contracting Companies To Attract And Retain Women In The Industry, Gopika Viswanathan May 2024

Evaluating Company Culture Of Roofing Contracting Companies To Attract And Retain Women In The Industry, Gopika Viswanathan

All Theses

The US construction industry, similar to many other industries, has a low representation of women. This difference is even more pronounced in construction trades, such as the roofing industry. The admission of more women into the industry is important to address workforce shortage issues that the industry is facing. Company culture has been cited as one of the primary reasons why women choose not to enter the industry or face barriers during their careers. The main objective of this study was to evaluate the company culture of roofing companies through factors identified by literature and by women and companies in …


Development Of Earthquake Hazard Prediction Software For South Carolina And Its Applications, Vishnu Saketh Jella May 2024

Development Of Earthquake Hazard Prediction Software For South Carolina And Its Applications, Vishnu Saketh Jella

All Dissertations

This dissertation presents the development of earthquake hazard generation software, CarolinaShake and CarolinaADRS, for the state of South Carolina and its applications in the field of earthquake engineering. South Carolina is a seismically active state in the eastern United States, and there is a need to accurately quantify the earthquake hazard and incorporate it into the design of infrastructure systems. To achieve this objective, the South Carolina Department of Transportation (SCDOT) is actively supporting the initiatives to update its seismic design policies and procedures of civil infrastructure systems. As part of those initiatives, first, CarolinaShake, a Windows-based graphical user interface …


Toxicokinetics And Toxicodynamics Of Radium-226 In An Estuarine Sentinel Species Geukensia Demissa, Sarah Donaher May 2024

Toxicokinetics And Toxicodynamics Of Radium-226 In An Estuarine Sentinel Species Geukensia Demissa, Sarah Donaher

All Dissertations

The historical use of radioluminescent objects, most notably those containing radium-226 (226Ra)-based paint, has contributed to contemporary environmental contamination of radioactive material, often near naval installations or other military-associated coastal sites. The risk to both human and environmental health from this small-scale, discrete radioactive material is challenging to predict due to large uncertainties in the source terms, bioavailability, and toxicity of these objects. The objective of this study was to provide information on the accumulation and toxicity of acute 226Ra exposure in a sentinel species to improve risk assessments for small-scale, coastal radiological contamination. The sentinel species …


Development And Application Of Discrete Element Models For Granular Materials - From Rigid Spheres To Complex-Shaped Flexible Particles With Breakage, Zakia Tasnim May 2024

Development And Application Of Discrete Element Models For Granular Materials - From Rigid Spheres To Complex-Shaped Flexible Particles With Breakage, Zakia Tasnim

All Dissertations

Granular materials, which can range from nanometers to centimeters, are widely encountered as particles or powders in nature and in engineered systems. Some examples of granular materials include sands, gravels, biomass feedstocks, rice grains, pharmaceutical pills, glass beads, and lunar or martian regolith simulants. The attributes of and the interactions between constituent particles dictate the bulk mechanical properties and behavior of granular materials. The discrete element method (DEM), a particle-based modeling technique, has become a useful numerical tool for modeling the bulk behavior (such as mechanical, flow, and breakage behavior) of granular materials, where interactions between the granular materials' individual …


Evacuation Of Students With Intellectual Disability In Building Fires: A Three-Part Methodology, Haley Hostetter May 2024

Evacuation Of Students With Intellectual Disability In Building Fires: A Three-Part Methodology, Haley Hostetter

All Dissertations

People with disabilities are one of the most vulnerable groups in building fires. Despite this, they have traditionally been overlooked by fire evacuation researchers. This is perhaps the most alarming for the group with Intellectual Disability when given their present statistics for fire involvement, injuries, and death. Annually, people with mental disabilities are involved in 1700 home fires, resulting in 39 fatalities and 122 injuries per 1000 fires. Additionally, 40% of these fires were started intentionally by people with mental disabilities. When combined with their high fire risk, the lack of evacuation research focused on people with Intellectual Disability shows …


Sustainability Of Apparel Exporting Industry Facilities In South Asia, Sree L. Anilkuma, George H. Berghorn, M.G. Matt Syal Mar 2024

Sustainability Of Apparel Exporting Industry Facilities In South Asia, Sree L. Anilkuma, George H. Berghorn, M.G. Matt Syal

The Professional Constructor

The apparel industry’s contribution to the gross domestic product in South Asian countries is significant and provides livelihoods for millions of people in this region. Although this industry’s contribution towards the economy is substantial, its negative impact on the environment and the working conditions have always been critical issues of concern. The two countries of emphasis in this research, Bangladesh, and India, have experienced numerous garment factory accidents in the form of building collapses, factory fires, and boiler explosions, which have killed and injured thousands of workers. These incidents have brought attention on the need to improve poor facilities and …


Taxonomy Of Trust And Maslow’S Hierarchy Of Needsin The Construction Industry, Ann B. Lyons, Vivek Sharma, Shima Clarke Mar 2024

Taxonomy Of Trust And Maslow’S Hierarchy Of Needsin The Construction Industry, Ann B. Lyons, Vivek Sharma, Shima Clarke

The Professional Constructor

Trust is vital in every facet of life, enabling collaborative efforts and valuing contributions from various individuals. This is particularly true in the construction industry, where teamwork is essential for success. Prior research has consistently demonstrated that heightened trust levels significantly contribute to better project outcomes and increased client satisfaction. Despite its critical role, the construction industry has yet to adopt a structured hierarchical perspective of trust that aligns with its unique demands. This study aims to fill this gap by validating a comprehensive taxonomy of trust specifically designed for the construction sector. Through literature review, this study identifies key …


Root And Causes Of Skilled Labor Shortage In Construction Industry: Comprehensive Literature Review, Nicholas Hardy, Carolina Barbosa-Resende, James Kereri, Arash Taghinezhad Mar 2024

Root And Causes Of Skilled Labor Shortage In Construction Industry: Comprehensive Literature Review, Nicholas Hardy, Carolina Barbosa-Resende, James Kereri, Arash Taghinezhad

The Professional Constructor

The skilled labor shortage is well documented from a historical perspective via studies focusing various construction trades such as carpentry, mechanical, electric and plumbing, and tile setters. Causes of such shortages such as industry image, college as a preferred choice after high school, and construction being a last resort have been investigated extensively. Consequently, possible solutions ranging from amplifying shop classes in high school to intensifying recruiting efforts for union training programs have all been addressed throughout the last 40 years. However, recent studies have focused on identifying the magnitude and reach of the skilled labor gap while limited attention …


The Professional Constructor, Full Issue, Volume 49, Number 01 Mar 2024

The Professional Constructor, Full Issue, Volume 49, Number 01

The Professional Constructor

No abstract provided.