Civil and Environmental Engineering Commons^™

Performance-Based Liquefaction Triggering Analyses With Two Liquefaction Models Using The Cone Penetration Test, Alex Michael Arndt

Theses and Dissertations

This study examines the use of performance-based engineering in earthquake liquefaction hazard analysis with Cone Penetration Test data (CPT). This work builds upon previous research involving performance-based liquefaction analysis with the Standard Penetration Test (SPT). Two new performance-based liquefaction triggering models are presented herein. The two models used in this liquefaction analysis are modified from the case-history based probabilistic models proposed by Ku et al. (2012) and Boulanger and Idriss (2014). Using these models, a comparison is made between the performance-based method and the conventional pseudo-probabilistic method. This comparison uses the 2014 USGS probabilistic seismic hazard models for both methods. …

Blending And Mixed Variational Principles To Overcome Locking Phenomena In Isogeometric Beams, Kyle Dennis Richardson

Theses and Dissertations

Two methods for overcoming locking phenomena in isogeometric beams are presented. The first method blends the rotation of a Timoshenko beam with the rotation of a Bernoulli beam to produce realistic displacements in straight beams. The second method uses mixed variational principles, specifically the Hu-Washizu Principle, to produce realistic displacements as well as realistic strains without post-processing.

Quick Shear Testing Of Aggregate Base Materials Stabilized With Geogrid, Rawley Jack Selk

Theses and Dissertations

The objective of this research was to apply a previously recommended laboratory testing protocol to specific aggregate base materials that are also the subject of ongoing full-scale field testing. The scope of this research involved three aggregate base materials selected from three sites where full-scale field testing programs have been established. The first and second field sites included five different geogrid types, categorized as either biaxial or triaxial, in a singlelayer configuration, while the third site included only the triaxial geogrid type in either a singleor double-layer configuration. Geogrid-stabilized and unstabilized control specimens were evaluated using the American Association of …

Full-Scale Testing Of Blast-Induced Liquefaction Downdrag On Driven Piles In Sand, Luke Ian Kevan

Theses and Dissertations

Deep foundations such as driven piles are often used to bypass liquefiable layers of soil and bear on more competent strata. When liquefaction occurs, the skin friction around the deep foundation goes to zero in the liquefiable layer. As the pore pressures dissipate, the soil settles. As the soil settles, negative skin friction develops owing to the downward movement of the soil surrounding the pile. To investigate the magnitude of the skin friction along the shaft three driven piles, an H-pile, a closed end pipe pile, and a concrete square pile, were instrumented and used to measure soil induced load …

Development Of A Simplified Performance-Based Procedure For The Assessment Of Liquefaction-Induced Settlements Using Liquefaction Loading Maps, Braden Michael Error

Theses and Dissertations

Liquefaction-induced settlement can cause extensive damage to infrastructure. Quantifying the amount of settlement that may occur after an earthquake is crucial to seismic design. The Pacific Earthquake Engineering Research (PEER) Center developed performance-based earthquake engineering (PBEE) as a probabilistic framework to characterize the risks associated with a seismic event. When applied to liquefaction-induced settlement, the PBEE framework provides a more complete and accurate representation of liquefaction hazard than other more conventional evaluation methods. Performance-based engineering is not widely used in practice, however, due to its complexity. In an attempt to make performance-based engineering methods more accessible to engineers for routine …

How The Choice Of Bed Material Load Equations And Flow Duration Curves Impacts Estimates Of Effective Discharge, Michael James Cope

Theses and Dissertations

The purpose of this study is to analyze how estimates of an important geomorphic parameter, effective discharge, are impacted by the choice of bed material load equations and flow duration curves (FDCs). The Yang (1979), Brownlie (1981), and Pagosa equations developed by Rosgen (2006) were compared for predicting bed material load. To calculate the bed material load using the Pagosa equations, the bedload and suspended load are calculated separately and the results are added together. To compare the effectiveness of the equations, measured bed material load data from the USGS Open-File Report 89-67 were used. Following the calculations, the equation …

Development Of A Performance-Based Procedure To Predict Liquefaction-Induced Free-Field Settlements For The Cone Penetration Test, Mikayla Son Hatch

Theses and Dissertations

Liquefaction-induced settlements can cause a large economic toll on a region, from severe infrastructural damage, after an earthquake occurs. The ability to predict, and design for, these settlements is crucial to prevent extensive damage. However, the inherent uncertainty involved in predicting seismic events and hazards makes calculating accurate settlement estimations difficult. Currently there are several seismic hazard analysis methods, however, the performance-based earthquake engineering (PBEE) method is becoming the most promising. The PBEE framework was presented by the Pacific Earthquake Engineering Research (PEER) Center. The PEER PBEE framework is a more comprehensive seismic analysis than any past seismic hazard analysis …

Geogrid-Reinforcement’S Zone Of Influence, Shaun Hilton, W. Spencer Guthrie

Journal of Undergraduate Research

Geogrid is a polypropylene material manufactured with approximately 1-in. wide openings, called apertures. A triaxial geogrid configuration is illustrated in Figure 1. Geogrid reinforcement is typically positioned beneath and/or within an aggregate base layer in a pavement structure and is designed to prevent lateral spreading of the individual aggregate particles comprising that layer. Thus, inter-particle friction can be increased among the individual aggregate particles located above and potentially below the geogrid. When this occurs, the result is an increase in the stiffness of the aggregate base layer that leads to a greater load-carrying capacity of the pavement.

Development Of A Flow Duration Curve To Determine Hydropower Feasibility, Susan Estep, Elise Estep, Dr. Jim Nelson

Journal of Undergraduate Research

The purpose of this project was to derive Flow Duration Curves (FDCs) by three separate methods in order to compare the accuracy of these methods. The FDCs would be used to estimate the amount of water that would be consistently available for hydropower.

Full-Scale Pavement Testing Of Aggregate Base Material Stabilized With Triaxial Geogrid, Shaun Todd Hilton

Theses and Dissertations

The objective of this research was to investigate the structural capacity of aggregate base materials stabilized with triaxial geogrid placed in a full-scale pavement involving control, or unstabilized, sections. Field testing was performed on a roadway in northeastern Utah that was 16 km (10 miles) long and included 10 test sections, seven stabilized sections and three control sections, each having five test locations. The pavement structure was comprised of a hot mix asphalt layer overlying an untreated aggregate base layer of varying thickness, depending on the test section. Except for the control sections, one or two layers of geogrid were …

Strut-And-Tie Modeling Of Multistory, Partially-Grouted, Concrete Masonry Shear Walls With Openings, Jeffrey Ryan Buxton

Theses and Dissertations

Construction practices are constantly evolving in order to adapt to physical locations and economic conditions. These adaptations may result in more cost-effective designs, but may also come at a cost of strength. In masonry shear walls, it is becoming more common to reduce the amount of grouting from every cell to only those with reinforcement, a practice known as partial-grouting. Partially-grouted masonry responds differently and in a more complex matter to lateral loads as compared to fully-grouted masonry. The response is made even more complex by wall discontinuities in the form of openings. The main objective of this study is …

The Effect Of Transit-Oriented Development Siteson Residential Home Pricing, Bradley S. Randall

Theses and Dissertations

For a number of years residential and commercial development has grown surrounding railways stations in many cities across the United States. One of the trends that has occurred in a number of cities relates to positive property value correlations between real estate values near transit stations and transit-oriented development (TOD) sites as compared to their counterparts not located near a railway station or freeway access. Many cities have noted that homeowners are willing to pay more to be near a TOD site and being near a site can represent a statistically significant factor in determining where to purchase a property. …

Structural Lightweight Grout Mixture Design, Hannah Jean Polanco

Theses and Dissertations

This research focused on designing a grout mixture using lightweight aggregate that achieves the minimum 28-day compressive strength required for normal-weight grout, 2000 psi. This research specifically studied the effects of aggregate proportion, slump, and aggregate soaking on the compressive strength of the mixture. The variable ranges investigated were 3-4.75 parts aggregate to cement volumetrically, 8-11 in. slump, and 0 and 2 cycles of soaking. The statistical model developed to analyze the significance of variable effects included a three-way interaction between the explanatory variables. All three explanatory variables had a statistically significant effect on the grout compressive strength, but the …

Seismic Analysis Of And Provisions For Dry-Stack Concrete Masonry Wall Systems With Surface Bond In Low-Rise Buildings, Joseph G. Eixenberger

Theses and Dissertations

Masonry is one of the oldest forms of construction materials that is still in use today. However, construction practices in the modern age demand faster and more economical practices. Dry-stack masonry, or masonry that doesn't use mortar to bind the blocks together, is a unique system to make masonry more economical. Though several systems of dry-stack masonry have been suggested little to no data exists as most of these systems are patented. This research used dry-stacked normal weight concrete masonry units with an eccentrically placed reinforcement. The wall system is connected through a surface bond and lacks any geometric connection. …

Using Lidar Data To Analyze Access Management Criteria In Utah, Marlee Lyn Seat

Theses and Dissertations

The Utah Department of Transportation (UDOT) has completed a Light Detection and Ranging (LiDAR) data inventory that includes access locations across the UDOT network. The new data are anticipated to be extremely useful in better defining safety and in completing a systemwide analysis of locations where safety could be improved, or where safety has been improved across the state. The Department of Civil and Environmental Engineering at Brigham Young University (BYU) has worked with the new data to perform a safety analysis of the state related to access management, particularly related to driveway spacing and raised medians. The primary objective …

Cloud-Based Analytic Element Groundwater Modeling, Jacob Baird Fullerton

Theses and Dissertations

Managing groundwater resources requires computer modeling software, which in turn brings its own costs in education and usage fees. Although many groundwater modeling programs can be obtained at relatively inexpensive rates the hidden costs of software training remain high in general. What has been done is to make both the software and training available online for free, but this method delegates all responsibility to the users for both accessing the software in addition to learning how to use it properly. In this research the accessibility of groundwater models has been improved upon by creating a web app of an open …

Characterizing Current And Geologic Phosphorus In Utah Lake Sediment Using Field Samples, Laboratory Methods, And Statistical Analysis: Implications For Water Quality Issues, Hani Yousef Abu Hmeidan

Theses and Dissertations

Phosphorus is an essential nutrient for aquatic life forms and plays a major role in the algae blooms that occur in lakes and reservoirs. It is considered a primary limiting nutrient of phytoplankton growth in streams, lakes, and reservoirs. Excess amounts of phosphorous may cause excess growth and biomass of algae. If phosphorus is available in excess, often from sewage and industrial discharges, the high levels in a lake or reservoir can lead to eutrophication. Utah Lake is a shallow, basin-bottom lake in a semi-arid climate with sediments that are thousands of feet thick. Starting 165 years ago, humans have …

Laboratory X - Autonomous Vehicle Application, Nate Lant, Matthew Strong

Engineering Applications of GIS - Laboratory Exercises

Autonomous vehicles are currently the newest and hottest technology and show tremendous potential in making current transportation much more efficient. GIS is a key element in providing different mapping solutions and satellite assistance to support the cars in addition to their LIDAR and camera systems. Over the last few decades, different technologies have been integrated into cars to make them more user friendly--more autonomous. Recently, cars have been given a standardized range to categorize them into different levels of autonomy. The levels range from 0 to 5. Level 0 has no capacity of any autonomous technology; level 1 has cruise …

Laboratory Exercise – Calculating Runoff Over Land Parcels, Wade Bozeman, Steven Evans, Ryan Selee

Engineering Applications of GIS - Laboratory Exercises

When developing land, most municipalities will require that all runoff from the site be retained on site or flow into a storm water conveyance system. In the near future, new regulation will require that all runoff be retained on site. For this reason, it is important to know how much runoff can be expected to flow over a potential development site. In this lab, you will use ArcMap ModelBuilder to predict the amount of flow which can be expected over a land parcel in a storm event.

Laboratory Exercise – Frontrunner Extension, Meeya Apelu, Jordan Arrowchris, Joseph Browning

Engineering Applications of GIS - Laboratory Exercises

The Utah Transit Authority’s (UTA) FrontRunner is a commuter rail line that runs 89 miles through Weber, Davis, Salt Lake, and Utah counties. There are 16 different stops along this line which are: Pleasant View, Ogden, Roy, Clearfield, Layton, Farmington, Woods Cross, North Temple, Salt Lake Central, Murray Central, South Jordan, Draper, Lehi, American Fork, Orem and Provo (UTA 2017). Using the FrontRunner is easy and is very convenient. The popularity of this transit system is increasing and UTA has announced their future plans to continue the rail line. UTA is exploring ways to go forward with this plan and …

Final Group Project - Optimal Route Finding, Jason Biesinger, Levi Burr, Tyson Terry

Engineering Applications of GIS - Laboratory Exercises

Emergency response teams are always preparing rescue plans and protocols so they may respond quickly to various incidents. Fire trucks and ambulances need to arrive at the scene of the incident rapidly to mitigate injury, and avoid more damage to property in the case of a fire (Kolesar et al. 1973). Holidays are times of high incidence, and officials always plan for potential risks that surround large events. The network analysis toolbox can be used to find and map out the quickest route from a variety of locations. The network analysis toolset in ArcMap makes it possible for us to …

Laboratory Exercise - Ideal Stargazing Locations Background, Michael Adamson, Brandon Walker, Nicholas Smith

Engineering Applications of GIS - Laboratory Exercises

Astrophotography is a specialized type of photography for recording photos of astronomical objects, celestial events, and large areas of the night sky. Astronomical photography employs long exposures so film or digital imaging devices can accumulate light photons over long periods of time. Urban areas produce light pollution so equipment and observatories doing astronomical imaging are often located in remote areas to allow long exposures without the film or detectors being swamped with stray light. Astrophotography is a popular hobby among photographers and amateur astronomers. Images of the night sky can be obtained with some of the most basic film and …

Laboratory Exercise: Calculating Hobble Creek 100 Year Flow Using Arcmap, Micklane Farmer, Saul Ramirez, Riley Vane

Engineering Applications of GIS - Laboratory Exercises

GIS is used extensively in watershed analysis. In previous labs, students have determined a watershed from DEM data. Calculating flow can be very useful in many engineering aspects. With the correct data, GIS can be used to develop a hydrologic model to calculate the flow from a watershed. The purpose of this lab is to develop a model to calculate the flow for the Hobble Creek 100 year event.

Final Laboratory Exercise - Amazon Hq2 Site Selection, Jared Lillywhite, Travis Mcstraw, Marco Rosas Rodriguez

Engineering Applications of GIS - Laboratory Exercises

GIS is often used by major corporations around the world to help manage processes such as shipping, inventory, sales, and expansion. GIS is specifically used in expansion to help determine suitable site locations for new stores, Headquarters, warehouses and other assets to a given corporation. This exercise is based on a real case study. On September 12th, 2017 Amazon announced that it would be opening up a second headquarters that would be equal in operation and size to its Seattle Headquarters. The company is currently taking proposals from different cities, however they are trying to determine which U.S. cities would …

Laboratory Exercise - Nfl Team Placement, Alex Barrow, Tavin Griffeth, Isaac Gomez

Engineering Applications of GIS - Laboratory Exercises

GIS is used by corporations and groups internationally to manage aspects of their business such as shipping, inventory, sales, marketing, facilities, and expansion plans. When dealing with expansion in particular, GIS is used to determine the most appropriate placement of a new store or location.

This laboratory exercise assumes that the National Football League is interested in creating a new team. This new team will be placed in the continental US. For the analysis that you will do, a number of data layers will be required, weather found at the references online sources or created manually. Once the data layers …

Laboratory Exercise - Calculating The Volume Of Material Displaced By Mount St. Helens Eruption Of 1980, Donald Anderson, Alex Fisher, Ken Lippold

Engineering Applications of GIS - Laboratory Exercises

There are several active volcanoes in the state of Washington. On May 18, 1980, one of these volcanoes, Mount St. Helens, erupted. On March 1, 1980, the University of Washington set up a seismograph in the area to monitor the volcano’s activity. On March 20, a minor earthquake was recorded under Mount St. Helens and the entire area was put on alert. Thanks to this warning, the locals were able to evacuate before the mountain erupted. Before fully erupting, some steam and ash was seen billowing out of the top, and on May 18, the volcano was ready to blow. …

Laboratory Exercise - Temple-View Least- Cost Mountain Bike Trail, Brad Wells, Jacob Wilcock

Engineering Applications of GIS - Laboratory Exercises

The International Mountain Bicycling Association (IMBA) has created several guidelines that are used when locating and building new mountain bike trails. A GIS is can be used to generate possible locations for mountain bike trails while following guidelines given by the IMBA. These guidelines include maximum allowable slopes, avoiding fall lines, avoiding flat areas, and seeking areas that include control points such as viewpoints, water, or other attractions. One way to determine the most appropriate placement of a mountain bike trail is to create and run a model in ArcMap that has the necessary input parameters defined within the model. …

Laboratory Exercise – Possible Zara Locations In Utah, Garlick Alyssa, Whitney Robison, Olivia Sorenson

Engineering Applications of GIS - Laboratory Exercises

GIS ModelBuilder can be used well for site selection. For this exercise, we will build a model that will automate the process of creating a map for the best locations in Utah to open a new Zara store. The principles presented here can easily be extrapolated to another state, country, or dataset to automate the process of site selection for retail stores.

Laboratory Exercise – Saratoga Springs Temple Site Locator, Jordi Berrett, Josh Gibbons, Tyler Mickelson

Engineering Applications of GIS - Laboratory Exercises

On April 2, 2017, President Thomas S. Monson of The Church of Jesus Christ of Latter-Day Saints (LDS) announced that the LDS Church would build a temple in Saratoga Springs, Utah. The temple will be the eighteenth LDS temple built in Utah and the fifth in Utah County. It is anticipated that the temple will serve church members in Saratoga Springs, Eagle Mountain, Lehi, and other surrounding areas. The LDS Church carefully chooses optimal sites for their temples. LDS temples tend to be view-able from the surrounding area, usual. Temples are also usually near major highways and in areas that …

Zombie Shelter Location, Shanna Carroll, Tyler Lindsay, Hannah Rasmussen

Engineering Applications of GIS - Laboratory Exercises

One common use of GIS is determining ideal locations for projects. This is because GIS makes it very easy to combine and analyze spatial data in a customized way. In this exercise, assume that there has been a recent zombie outbreak in Utah, USA. To determine the ideal hideout location, data that indicates a safe location must be acquired and combined with geography that is conducive to wilderness survival. Once the data is gathered, spatial analysis using GIS overlay tools must be conducted to determine the ideal location for an anti-zombie hideaway hut. In this exercise, multiple tools will be …