Civil and Environmental Engineering Commons^™

Crack Propagation Of Vehicle‑Steel Bridge Deck Slabs Based On Pavement Damage, Tang Sheng, Yin Xinfeng, Zhang Ming, Yan Wanli

Journal of China & Foreign Highway

In order to study the influence of vehicles under different pavement damage conditions on crack propagation of welded toe at the roof of steel bridge deck slabs,finite element models of suspension bridges,fine vehicles,and local steel bridge deck slabs were established,and multiple groups of obstacle heights were set to simulate pavement damage.The explicit dynamic analysis program was used to simulate vehicle-bridge coupling vibration and extract the forces of vehicles on the steel bridge deck slabs at different lanes,speeds,and obstacle heights.The crack propagation life of the welded toe at the roof was obtained by applying them to a local steel bridge deck …

Calculation Of Socket Depth For Circular Pipe Pier-Bearing Platform Socket Connection, Chen Jingli, Xiao Feng, Wang Zhigang, Wang Zhihai, Xu Yan

Journal of China & Foreign Highway

The minimum socket depth for circular pipe pier-bearing platform socket connection can be calculated according to Article C.0.3 in the Specifications for Design of Highway Precast Concrete Bridges (JTG/T 3365 -05—2022 ).In order to enable engineering designers to fully understand and correctly apply the calculation formula in this article,this paper first introduced the main technical features of the typical connection scheme,as well as the structural failure principles and objectives formulated in the specification of the typical connection scheme.Then,it briefly introduced the experimental research content and results of the typical connection scheme and explained the key construction measures and their functions …

Reliability Analysis Of Long‑Span Concrete Box Arch Bridge Under Temperature Effect Combinations, Zheng Junlin, Jiang Youbao, Zheng Xinhao, Lu Naiwei

Journal of China & Foreign Highway

The existing design methods for concrete arch bridge structures do not consider the random characteristics of the eccentricity generated by load effects and overlook the influence of stochastic eccentricity on structural reliability.To address this deficiency,a calculation model for eccentricity under temperature effect combinations was derived.The random characteristics of eccentricity for different sections of the main arch of concrete arch bridges and their sectional bearing capacities were analyzed under different load parameter combinations.By utilizing the Monte Carlo method,reliability indices were computed for different sections of the main arch and different load parameter combinations after considering the random characteristics of eccentricity.The results …

Preparation And Performance Of Emulsified Asphalt With High-Temperature Resistant And Wheel Sticking-Free Effects, Yan Han, Zha Xudong, Kang Xiaogang, Gong Yan, Zhang Zhengji, Zhang Wenshuai

Journal of China & Foreign Highway

To address the problem of wheel sticking at high temperatures in the construction process of existing wheel sticking-free emulsified asphalt of tack coat,this paper adopted the composite modification method of 70# and 15# matrix asphalt and waterborne polyurethane resin (WPR ) to prepare hard asphalt-WPR (HA-WPR )-modified emulsified asphalt in accordance with the high-temperature resistant and wheel sticking-free requirements.Through a series of laboratory tests,the technical performance,wheel sticking-free performance,and interlayer bonding performance of the emulsified asphalt were researched and compared with ordinary wheel sticking-free emulsified asphalt and ordinary emulsified asphalt tack coat oil.The results show that the technical performance of the …

Model Analysis Of Axial Compressive Mechanical Properties Of Concrete Column Constrained By Textile-Reinforced Engineered Cementitious Composites, Ma Gao, Wang Zhaoyang

Journal of China & Foreign Highway

In order to avoid the problem of matrix cracking in textile-reinforced concrete (TRC ),a reinforcement method of textile-reinforced engineered cementitious composites (ECC ),namely TRECC composed of textile and high-performance ECC was proposed.However,the research on the axial compressive mechanical properties of TRECC-constrained concrete in China and abroad is still insufficient,and there is a lack of reliable strength and ultimate strain analysis models.A total of 116 axial compression test results of TRC-constrained concrete columns and 125 axial compression test results of TRECC-constrained concrete columns were collected.The confinement mechanisms and failure modes of TRECC and TRC-constrained concrete were compared.Then,the strength models and ultimate …

Key Techniques For Constructing Flexible Geosynthetic Reinforced Soil Abutments, Yu Xiaoxiao, Xu Chao, Li Haoyu, Zuo Binli

Journal of China & Foreign Highway

The flexible geosynthetic reinforced soil (GRS ) abutments offer several advantages,including cost saving,reduced bridgehead misalignment,and good seismic performance,showing great potential for application in transportation engineering both in China and abroad.The flexible GRS abutment is essentially composed of a composite structure formed by closely spaced layers of geosynthetic reinforcement material,and the construction quality and load-bearing capacity are crucial to the success of the project.To ensure construction quality and study the construction process of flexible GRS abutments,a construction site monitoring method was adopted.Based on the experience from the construction of a vehicular overpass on the Wuwei ‒ Yuexi Expressway,the quality control measures …

Research On Mechanical Entry Excavation And Reinforcement Measures For Large Cross-Section Tunnel, Liang Xiao, Li Ke, Guo Hongyan, Hu Xuebing, Yao Chengrui

Journal of China & Foreign Highway

With the innovation of tunnel construction techniques and mechanical equipment,mechanical drilling and blasting for mountain tunnels have gradually developed.However,several challenges exist during the mechanical entry excavation for mountain tunnels,including the significant influence of geological factors,limited equipment adaptability,and constrained working space.This research,based on a specific tunnel project,utilized FLAC3D finite difference software to study the mechanical excavation method and auxiliary reinforcement measures for shallow-buried segments at the large cross-section tunnel portal.A comparative analysis was conducted on the displacement of surrounding rock,the stress of supporting structures,and the variation of plastic zones before and after tunnel face reinforcement for different advances per cycle and …

Application Research Of Bim Technology In Highway Prefabricated Bridge Scheme Design, Li Jinlong, Wang Xinnan, Liu Dongsheng, Chen Zhongzhi

Journal of China & Foreign Highway

At present,the highway bridge scheme requires continuous adjustments and upgrading due to iterative updates of design data and refined investigation of the surrounding environment of the bridge site.This paper upgraded the traditional route design software,developed a GIS-integrated platform,built a three-dimensional environment with design data as the core,and created a bridge scheme model through parametric intelligent design.It also evaluated and optimized the bridge scheme based on the integration of the bridge model and the surrounding environment.The results show that by using BIM technology,the forward design of a bridge scheme based on a three-dimensional environment is realized.This approach automates the scale statistics …

Estimating Depth Of Roadway Flooding Using Data From Lidar And Surveillance Cameras, Mahta Zamanizadeh, Mecit Cetin

Graduate Student Government Association Research Conference

In this study, we fuse data from a 3D LIDAR mounted on a vehicle and images from an external traffic surveillance camera to create a 3D representation of a segment of a roadway that experiences frequent flooding. The point cloud data from the LiDAR in this study is collected from a road segment of W 49^th Street in Norfolk, near the ODU campus. The traffic surveillance camera is mounted on a public parking building in the same area. The LiDAR collects continuous point cloud frames as the vehicle traverses the section. Multiple LIDAR frames related to the respective segment …

Application Of Cementitious Materials And Fiber Reinforcement To Enhance Lime Stabilization For Nebraska Shale Soils, Jongwan Eun, Seunghee Kim, Chung R. Song, Laith Ibdah, Kenaz Owusu

Nebraska Department of Transportation: Research Reports

Lime stabilization is a widely used technique to improve weak subgrades; however, its effectiveness under freeze-thaw cycles remains a critical challenge. This study investigates the incorporation of cementitious materials and fiber to enhance the mechanical properties and environmental resistance of lime-stabilized soils under such conditions. Two types of soil, gray shale (plasticity index of 37.8) and clay soil (plasticity index of 19.0) from Nebraska, were used. Stabilization mixtures included lime dosages of 0%, 3%, and 6% by weight, combined with either 10% fly ash or 3% and 6% cement by weight, and 0% and 1% fiber. The experimental program comprised …

Current Practices In Rock Scaling, Daryl J. Greer, Kean H. Ashurst Jr

Kentucky Transportation Center Research Report

Rockfalls, which result from the chemical and physical weathering of aging exposed rock cuts, occur frequently along many Kentucky roadways and can endanger travelers. Mitigating rockfalls often requires substantial excavation, procuring additional right of way, and/or hiring specialty contractors. An alternative to these expensive processes is rock scaling, which can be a cost-effective tool for mitigating rockfalls. Rock scaling entails removing loose and unstable rocks from rock cut slopes within the right of way to reduce rockfall risk and is being used with increased frequency by state transportation agencies around the country. The Kentucky Transportation Cabinet (KYTC) has completed several …

Bridge Load Posting Based On Load Testing, Cody Hutchinson, Abheetha Peiris, Issam Harik

Kentucky Transportation Center Research Report

AASHTO’s Manual for Bridge Evaluation (MBE) provides guidance for analytically evaluating bridge capacity based on available design information and the results of field inspections. This analysis results in a rating factor (RF), which quantifies a bridge’s safe load carrying capacity. RF accuracy, however, depends on the availability of information about structural details and material properties. As such, load rating bridges without design plans is difficult as field inspections alone often cannot provide enough information to perform detailed analysis. In many instances this means that a bridge would possess a substandard rating factor (RF < 1.0) simply due to the conservative assumptions required to perform traditional analysis. The most effective method for safely modifying such conservative theoretical rating factors is through load testing. Load testing measures actual bridge behavior and, for most bridges in good health, finds an increase in load rating is justified. This project utilized load testing to load rate 14 bridges in Kentucky that lack structural plans. Researchers first determined theoretical ratings using MBE-prescribed methods. For information typically taken from design plans, but which could not be measured directly, data-backed methods for making conservative assumptions were developed. For most bridges included in the study, theoretical rating factors alone suggested load postings were necessary. Load testing was then carried out utilizing tandem rear-axle dump trucks with measured axle weights. Multiple single-lane load cases were selected to maximize the effects being rated. Strain data were collected in real time using a wireless reusable strain gage system. Using these data, researchers computed a field test adjustment factor using MBE methods which directly modified the calculated theoretical RFs. Ultimately, load testing provided sufficient evidence to safely recommend that load postings were not necessary for any bridges in this study.

Effect Of Shrinkage-Mitigating Materials, Fiber Type, And Repair Thickness On Flexural Behavior Of Beams Repaired With Fiber-Reinforced Self-Consolidating Concrete, Jingjie Wei, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

While self-consolidating concrete (SCC) has emerged as a highly effective approach for the repair of concrete structures, there have been few investigations regarding the effect of the combination of different fiber and shrinkage-mitigating material types (shrinkage-reducing admixture, SRA; superabsorbent polymer, SAP; and expansive agent, EA) on the flexural behavior of repaired structures. This study aims to explore the influence of three different shrinkage-mitigating materials (1.25%–2.5 % SRA, 4%–8% EA, and 0.2%–0.4 % SAP), four fiber types (two macro synthetic fibers, MSFA and MSFB; 5D hooked steel fibers, 5D; a combination of 80 % 3D hooked steel +20 % short steel …

Application Of Cementitious Materials And Fiber Reinforcement To Enhance Lime Stabilization For Nebraska Shale Soils, Jongwan Eun, Seunghee Kim, Chung R. Song, Laith Ibdah, Kenaz Owusu

Nebraska Department of Transportation: Research Reports

Lime stabilization is a widely used technique to improve weak subgrades; however, its effectiveness under freeze-thaw cycles remains a critical challenge. This study investigates the incorporation of cementitious materials and fiber to enhance the mechanical properties and environmental resistance of lime-stabilized soils under such conditions. Two types of soil, gray shale (plasticity index of 37.8) and clay soil (plasticity index of 19.0) from Nebraska, were used. Stabilization mixtures included lime dosages of 0%, 3%, and 6% by weight, combined with either 10% fly ash or 3% and 6% cement by weight, and 0% and 1% fiber. The experimental program comprised …

Draft Active Travel & Public Realm Evaluation Framework (Summary), Sarah Rock Dr, Sinead Flavin

Other Resources

This aim of this Draft Summary Framework is to assist Local Authorities & other similar authorities in the monitoring and evaluation of their active travel & public realm interventions. It is intended to allow for flexibility depending on the project objectives and context, and is not intended to be a definitive list of indicators and metrics. The indicators and metrics included seek to strike the balance between what's reasonable, practical and feasible for a Local Authority and associated resources in terms of monitoring & evaluation. Not all projects can be reasonably expected to be fully monitored and evaluated, thus a …

Flexural Post-Cracking Performance Of Macro Synthetic Fiber Reinforced Super Workable Concrete Influenced By Shrinkage-Reducing Admixture, Jingjie Wei, Nima Farzadnia, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Most literature has focused on the effect of shrinkage-reducing admixture (SRA) in shrinkage mitigation resistance of concrete. This study aims to examine the impact of SRA on the efficiency of macro synthetic fibers (MSF) in enhancing the flexural post-cracking behavior of fiber-reinforced super workable concrete (FR-SWC). A comparative analysis of the influence of fiber combinations on the flexural post-cracking behavior of beams is also included. Results showed that a higher dosage of SRA, particularly at 5 % by mass of binder, had a noticeable negative impact on flexural post-cracking performance of beams while exhibiting positive effect on workability and shrinkage …

Proactive Distributed Emergency Response With Heterogeneous Tasks Allocation, Justice Darko, Hyoshin Park

Engineering Management & Systems Engineering Faculty Publications

Traditionally, traffic incident management (TIM) programs coordinate the deployment of emergency resources to immediate incident requests without accommodating the interdependencies on incident evolutions in the environment. However, ignoring these inherent interdependencies while making current deployment decisions is shortsighted, and the resulting naive deployment strategy can significantly worsen the overall incident delay impact on the network. The interdependencies on incident evolution in the environment, including those between incident occurrences and those between resource availability in near-future requests and the anticipated duration of the immediate incident request, should be considered through a look-ahead model when making current-stage deployment decisions. This study develops …

Human Perception Of Ai Capabilities At Classifying Perturbed Roadway Signs, Katherine R. Garcia, Jing Chen, Yanru Xiao, Scott Mishler, Cong Wang, Bin Hu

Psychology Faculty Publications

Artificial Intelligence (AI) is crucial to numerous functions required for driving automation systems, including the computer vision techniques used to detect the roadway environment and make real-time decisions. However, the images used as inputs to the AI system may be maliciously perturbed, or manipulated, causing the AI system to make an incorrect classification. In this study, we examined humans’ perception of the AI’s computer vision capability of classifying various road sign images, including the original images, images with two different types of malicious attacks, and images that are scrambled randomly at the pixel level. Our results showed that participants rated …

Adaptation For Whom? Understanding The Impacts Of Dyke Policies On Small-Scale Farmers In Ca Mau Province Of Vietnam, Nguyen Minh Quang, Nguyen Van Minh, Nguyen Vo Chau Ngan, Martha B. Lerski

Publications and Research

Low-lying deltas worldwide are extremely vulnerable to sea-level rise. As the risks of climate-induced flooding become increasingly clear, the thirst for infrastructure-driven adaptation increases. This highlights a patent need to understand the impacts of engineering adaptation solutions, especially those targeting built structures such as dykes and sluices, on farmers from a bottom-up, farmer-centred perspective. The study addresses this call by examining cases where dyke policies, while successful in some dimensions, have undermined small-scale farmer livelihoods in Ca Mau ― Vietnam’s southernmost rural province. It identifies areas in need of attention and adds empirical data related to this group of farmers. …

Comparative Analysis Of Lidar And Close-Range Photogrammetry Techniques For Inspection Of Mse Walls In Two Georgia Bridges, Md. Mehrab Hossain

College of Graduate Studies: Theses & Dissertations

Mechanically Stabilized Earth (MSE) retaining walls are durable, settlement tolerant, easy to install, and present cost-effectiveness, in highway bridges. Nevertheless, the cost of repairing MSE walls is high, and it is crucial to have an accurate, quantitative, and scalable inspection method for early detection of potential problems. This study aims to analyze and evaluate undesired displacements that may affect these walls over time. For this, two remote-sensing technologies are considered: Light Detection and Ranging (LiDAR) and 3D Close Range Photogrammetry (CRP). Their performances are compared against an accurate Robotic Total Station (RTS) device, serving as the benchmarking instrument. This work …

Measuring Accessibility Of Electric Vehicle Charging Infrastructure: A Case Study In Kentucky, Oluwasola Elijah Fagbohun

Theses and Dissertations--Civil Engineering

This thesis assesses spatial accessibility to electric vehicle charging infrastructure across Kentucky by investigating methodological approaches to measure accessibility: provider-topopulation ratios, regional accessibility metrics, and several methods in the family of gravity models. The Enhanced Two-Step Floating Catchment Area method was employed to measure electric vehicle charging station accessibility across Kentucky using a network-based approach in ArcGIS Pro. The analysis integrated 2023 American Community Survey 5-year Census block group data, Kentucky road network datasets, charging station locations from the Alternative Fuels Data Center, and Alternative Fuel Corridor designations. We examined existing infrastructure and proposed stations outlined in the Kentucky electric …

A Scoring Approach For Evaluating And Ranking Complete Streets Projects, Eirini Stavropoulou

Theses and Dissertations--Civil Engineering

Complete Streets is a vital strategy for developing an equitable transportation network that provides access to all users and transportation options to communities. A growing interest in this concept has been noted in the United States, with over 1,700 Complete Streets-related policies implemented nationwide. The Kentucky Transportation Cabinet (KYTC) has developed the “Complete Streets, Roads, and Highways Manual” and the “Complete Streets Policy” aiming to promote a safer and more inclusive transportation system statewide through Complete Streets implementation. A recent KYTC initiative was the development of a scorecard to systematically evaluate Complete Streets projects competing for funding. The scorecard is …

Adjusting Benefit Estimation For Pedestrian And Bicycle Facilities For Kentucky, Dionysios Tzamakos

Theses and Dissertations--Civil Engineering

The growing shift of commuters towards active transportation (AT) in the U.S. has led transportation agencies to place greater emphasis on improving bicycle and pedestrian facilities. Such improvement efforts can be integrated into multi-modal highway planning and development or be implemented through stand-alone pedestrian and bicycle projects both resulting in additional AT demand. Measuring the benefits of infrastructure improvement is central to prioritizing projects, as active transportation contributes to health, congestion reduction, safety, and recreational benefits. This study aims to calibrate the demand estimates for walking and cycling and estimate the associated benefits for the state of Kentucky. Population density …

Enhancing Operational Efficiency Of Paratransit Services Using Predictive Models, Troyee Saha

Civil Engineering Dissertations - Archive

Paratransit services play a vital role in supporting the mobility of older adults and individuals with disabilities, yet they experienced major disruptions during the COVID-19 pandemic and continue to face ongoing operational issues such as trip cancellations. This dissertation explores these challenges through three distinct analyses using data from Arlington, TX. The first chapter investigates how COVID-19-related factors (policies, cases, and vaccination) and socio-demographics influenced paratransit usage from 2019 to 2021. Applying SARIMAX and Poisson regression models, the study finds a substantial drop in ridership—41% in 2020—and a shift toward essential medical travel. It also reveals that restrictive policies, such …

Development Of A Drone-Assisted Pavement Management Framework Based On The Pavement Condition Index For University Parking Lots, Omesh Pasuluru

Civil Engineering Theses - Archive

Efficient pavement management is essential for keeping university parking lots in good condition. At the University of Texas at Arlington, parking areas experience heavy use and environmental wear, which can cause damage if not addressed early. Traditional methods for assessing pavement conditions are time-consuming, interrupt daily activities, and are expensive. Hence, there is a need for better solutions. This study introduces a drone-based pavement management approach that uses the Pavement Condition Index (PCI) system. The PCI is a numerical scale from 0 to 100 that rates pavement quality based on surface condition. A high PCI score (85-100) indicates the pavement …

Updating Rainfall Zones And Intensities In Nebraska For Improved Design Of Non-Bridge-Sized Drainage Structures, Rezaul Mahmood, Tirthankar Roy, Chanchal Gupta, Kanak Kanti Kar, William Sorenson

Nebraska Department of Transportation: Research Reports

This study assesses the effectiveness of precipitation zones and Intensity-Duration-Frequency (IDF) curves used by the Nebraska Department of Transportation (NDOT) for designing drainage structures. Twenty stations were selected for the analysis of revised IDF curves out of forty-two stations. Datasets have been considered from the National Center for Environmental Information (NCEI). By Comparing the new curves with existing ones, the study efforts examine the frequency, duration and severe rainfall. The results show that the IDF curves for various zones and stations varied noticeably from one another. Also, noticed that Zone A and B shows lower rainfall intensities in short to …

Hydronic Parking Lots: A Solution For Urban Heat Island Mitigation, Sumeet Jinnappa Paramaj

Theses and Dissertations

The Urban Heat Island (UHI) effect has emerged as a critical challenge in modern cities. It contributes to elevated local temperatures, placing significant stress on urban ecosystems and public health. One of the primary drivers of this phenomenon is the widespread use of impervious surfaces, such as dark-colored parking lots, which absorb heat during the day and gradually release it at night. This ongoing cycle results in persistently warmer urban environments. As cities continue to expand and densify, the need for effective, sustainable strategies to reduce urban heat becomes increasingly urgent.

This project aims to explore innovative interventions, particularly in …

Autonomous Vehicle Supported Mobility Services For Rural Areas, Alvira Ahmed Tasnim

Graduate Theses, Dissertations, and Problem Reports (ETD)

Autonomous Vehicles (AVs) are emerging as a promising mobility solution to address growing transportation demands, particularly unmet traffic demand in rural areas where conventional transit systems often fall short. Rural areas face unique mobility challenges due to dispersed populations, limited infrastructure, and low/no transit coverage. Existing transit services tend to concentrate around dense urban cores, leaving low-demand areas outside underserved. This spatial undercoverage leads to significant mobility gaps for rural residents. This study examines the potential of AV-based ride-sharing services to address these mobility needs by providing flexible, demand-responsive mobility services where fixed-route transit services are either economically or operationally …

The Impact Of Skew On The Flexural Behavior Of Press-Brake-Formed Tub Girders, Matthew Allan Weatherholt

Graduate Theses, Dissertations, and Problem Reports (ETD)

The Short Span Steel Bridge Alliance (SSSBA) is a group of bridge and buried soil steel structure industry leaders who have joined together to provide educational information on the design and construction of short span steel bridges in installations up to 140 feet in length. Press-brake-formed-tub-girders (PBFTGs) were developed by a technical working group within the SSSBA in response to a rising demand for rapid infrastructure replacements for short span bridge applications. PBFTGs are produced from structural steel plate and can be finished as weathering steel or galvanized. After being cold bent to the appropriate shape, shear studs are welded …

Dynamic Modulus Of Sbs-Modified Asphalt Mixtures Added With Ground Tire Rubber Content, Azharul Islam

College of Graduate Studies: Theses & Dissertations

The study investigates the improvement of the dynamic shear modulus in the base and styrene butadiene styrene (SBS) modified asphalt mixture by accumulating varying amounts of ground tire rubber through an Asphalt mixture performance tester (AMPT). This thesis specifically explores how different percentages of ground tire rubber (GTR) influence the mechanical properties and durability of the asphalt mixture articulated with two grades, PG 64-22 and PG 76-22. The experimental framework consisted of preparing asphalt mixtures blended with 10% to 15% of the binder for PG 64-22 and 3% to 8% of GTR for PG 76-22. The laboratory testing involved using …