Civil and Environmental Engineering Commons^™

Comparison And Evaluation Of Overlay And Leveling Binder In Traffic Circle Construction, Pratik Neupane

Graduate Theses and Dissertations (2019 - present)

Traffic circles play a vital role in managing traffic flow and ensuring safety, yet their unique traffic conditions make them prone to early cracking and deformation. This study evaluated the performance of overlay and leveling binder asphalt mixtures for a reconstructed traffic circle at the University of South Alabama, using plant-mixed laboratory-compacted (PMLC) specimens. Volumetric analyses were performed to determine maximum specific gravity (Gmm), bulk specific gravity (Gmb), and air voids content. Laboratory tests were conducted on both the overlay and leveling binder layers using indirect tensile cracking test (IDEAL-CT) and indirect tensile rutting test (IDEAL-RT) to assess cracking tolerance …

Incorporating Recycled And Repurposed Plastic Into 100% Reclaimed Asphalt Pavement, Basant Bhatt

Graduate Theses and Dissertations (2019 - present)

The increasing awareness of sustainability in the asphalt industry has driven the use of recycled materials like reclaimed asphalt pavement (RAP) and waste plastic. This study examines the incorporation of recycled polypropylene (rPP), recycled high-density polyethylene (rHDPE), and recycled low-density polyethylene (rLDPE) at 0.3%, 0.6%, and 0.8% dosages into 100% RAP, along with the warm mix asphalt additive Evotherm® P25. Laboratory tests were conducted to evaluate the mechanical and durability performance of the modified asphalt mixtures while rutting and fatigue life were evaluated using mechanistic-empirical (ME) analysis in PerRoad software. Both plastic type and dosage had a statistically significant impact …

Enhancing Asphalt Mix Design Through Film Thickness And Bailey’S Gradation Method, Lydia Quinn

Civil Engineering Undergraduate Honors Theses

Contemporary asphalt research aims to strike a balance between rutting and fatigue cracking to enhance pavement longevity. The performance of asphalt mixtures is influenced by factors such as aggregate gradation and asphalt film thickness. Although gradation typically adheres to the mid-gradation method, asphalt film thickness is included in certain mix designs, even though it is not universally regarded as an essential parameter. Nonetheless, no current method primarily addresses both gradation and asphalt film thickness together. In this research, aggregate gradations were designed using the principles of Bailey’s method along with various other criteria such as control points, the dust to …

A Statistical Investigation Of The Parameters Influencing Rutting And Cracking Performance In Asphalt Mixtures, Alexis Light

Civil Engineering Undergraduate Honors Theses

Durable pavement is essential for modern transportation infrastructure, especially in the United States of America which boasts over 8.5 million lane miles of roads and highways. Despite advanced construction techniques, asphalt pavements are susceptible to rutting and cracking, significantly affecting their performance and maintenance costs. Current methods for analyzing rutting and cracking in asphalt mixtures rely on various parameters, leading to measurement variability. This highlights the need for more rigorous analysis to explore the relationship between mix design variables and pavement performance. This research explores the IDEAL-CT and APA data from 171 mix designs collected by the Arkansas Department of …

User Acceptance Of Shared Autonomous Vehicles, Haotian Su

All Dissertations

A dissertation is proposed to explore user acceptance of shared autonomous vehicles (SAVs). SAVs are facing limited user acceptance. To systematically tackle the user acceptance barriers of SAVs, the main problem can be disintegrated into two sub-problems of user acceptance of autonomous vehicles (AVs) and ridesharing. The comfort of the ride experience in AVs is a determinant of user acceptance. Understanding the influential factors and developing methodologies to quantify human comfort in AVs are essential to facilitating future research to improve human comfort in AVs. The current pooled rideshare (PR) service closely resembles the anticipated future of SAVs. Understanding why …

Mash Crashworthiness Of Work Zone Devices And Breakaway Luminaire Poles, Mohammadreza Rajaee

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

This thesis presents a study on the crashworthiness of two commonly-used roadside safety devices: Type II barricades and luminaire poles supported by TB1-17 transformer bases. The first part focuses on designing and evaluating a non-proprietary, Type II barricade that meets MASH criteria. A validated LS-DYNA model, based on a previously-tested Type III barricade, was used to guide the design. The proposed Type II system was evaluated through simulation and confirmed with full-scale crash testing. The second part of the study investigates luminaire poles supported by the TB1-17 transformer base. A previously-developed LS-DYNA model was updated and validated using test No. …

Development Of Timber Bridge Railing And Approach Guardrail Transition, Aaron Lechtenberger

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Timber bridges with transverse and longitudinal bridge decks are increasingly utilized across the United States. However, limited research exists to develop bridge railing systems for high-service-level roadways that meet current vehicular impact safety standards. In response to this gap, the United States Department of Agriculture - Forest Service -Forest Products Laboratory (USDA-FS-FPL), in collaboration with the Midwest Roadside Safety Facility (MwRSF), initiated a research program to develop, crash test, and evaluate higher-service-level bridge railings and approach guardrail transitions (AGTs) compliant with the American Association of State Highway and Transportation Officials (AASHTO) Manual for Assessing Safety Hardware (MASH).

This study continued …

Assessing A Solution For Ga Work Zone Safety Through Cross Classification, Asiah Lightfoot, Sunanda Dissanayake

Symposium of Student Scholars

Work zone safety is a health risk for drivers and construction workers. In Georgia, work zone crashes have decreased over the past 5 years, but the number of fatalities has still been over 1,000 each of those years. Studies have proven solutions such as lowering the speed limit or relying on current traffic control devices to be ineffective. The risks associated with these crashes must be recognized to improve upon previous solutions or innovate new ones from the results. The objective of this study is to utilize cross classification to identify factors that contribute to work zone crash deaths and …

Development Of A Microcontroller-Based Intelligent Traffic Light Control System For Vehicular Movement In T-Junctions, Frederick O. Ehiagwina

Tanzania Journal of Engineering and Technology (TJET)

This research is devoted to the issue of regulating traffic congestion in major cities using light-dependent resistors coupled with the PIC16F877A microcontroller. This study proposes an intelligent traffic control system for T-Junctions, utilizing sensing and control to optimize traffic flow through dynamic phase adjustments and congestion reduction, enabled by a microcontroller-based decision-making system. The proposed system reduces traffic congestion, automates control, and enhances safety, minimizing accidents and lowering infrastructure costs. Under simulated environment, it demonstrates an average response time of 50 ms and achieves 99% accuracy in displaying the correct countdown. Finally, the number of state transitions handled per minute …

Comparative Analysis On Design Error Risks In Design-Bid-Build And Design-Build Construction Approaches, Eradius Edward Rwakarehe

Tanzania Journal of Engineering and Technology (TJET)

This study was conducted to compare design errors risk in Design-Bid-Build (DBB) (traditional) and Design-Build (DB) methods in building projects. Several construction projects under both DB and DBB method were reviewed. On most of construction projects under DB method, it was found that there were over supply of floor area due to different reasons. Also, it was found that, clients’ requirements were changed during project execution, which resulted into change on schedule, contract value and project quality. It was also revealed that in most cases, designs were in accordance with the clients’ requirements as submitted earlier but during construction clients …

Pros And Cons Of Preservation Treatments, Buzz Powell

Local Transportation Asset Management Conference

No abstract provided.

Carbon Accountability Scores: A Process-Oriented Approach For Carbon Offsetting Using Ai Agents, Joshit Mohanty, Vaishali Vaishali

Graduate Student Government Association Research Conference

Conventional carbon offset programs rely on quantified emissions to determine balancing requirements. While this approach offers a standardized means of measuring carbon output, it often provides industries with a loophole—allowing them to offset their emissions by purchasing equivalent credits for activities such as tree planting rather than tackling inefficiencies at the source. This research proposes a process-based framework called Carbon Accountability Scores (CA scores) to offer a proactive strategy for assessing and reducing carbon footprints. Instead of focusing on the mere balancing of emitted and sequestered carbon, CA scores integrate an organization’s operational processes into the calculation, thereby offering the …

Eyes On The Road: Disentagling Cyclist Mental Workload At Intersections, James Joseph Rawson

Civil Engineering ETDs

In North America, cyclists often share infrastructure with motor vehicles and encounter frequent conflicts with them at intersections. While past research assumes cyclists' experiences mirror those of drivers, most studies focus on roadway segments rather than intersections. This study addresses that gap by, for the first time we are aware of, examining cyclist perceptions at intersections using head and gaze movement data. Leveraging naturalistic data conducted in Albuquerque New Mexico, and statistical techniques, including t-test and repeated measures ANOVA, our findings suggest that – similar to drivers - cyclists do experience greater mental workload when performing turning movements than when …

Digital Fabrication With Fiber-Reinforced Concrete, Haodao Li, Kamal H. Khayat

Miners Solving for Tomorrow Research Conference

No abstract provided.

Innovative Design Methodology For Durable Open-Graded Friction Course Asphalt Mixtures, Anas Abualia

LSU Doctoral Dissertations

Open-graded friction course (OGFC) is a thin asphalt mixture surface layer with a high percentage of coarse aggregates and high interconnected air voids, which provides improved skid resistance, visibility, and decreased pavement-tire noise. However, construction personnel at DOTD reported that conventional OGFC mixtures have short service life (raveling distress). Further, their structural contribution to the pavement structure is commonly neglected and designed only for functionality purposes.

The objective of this study was to develop a rational mix design methodology to improve the durability of OGFC asphalt mixtures. Specific objectives are to: (1) conduct a rheological and chemical characterization of polymer-, …

Underlying Mechanisms Of The Effect Of Microfines Of Manufactured Sand On Non-Linear Structural Build-Up Of Cement Paste, Jiang Zhu, Jiaping Liu, Kamal H. Khayat, Xin Cheng, Wei Zhao, Zhen Li, Xin Shu, Yongbo Huang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The rheological properties of cement-based materials made with manufactured sand vary with the content and physio-chemical properties of microfines in the sand. However, the evaluation of rheological properties regarding the structural build-up at early-age hydration remains challenging for the cementitious materials prepared with different manufactured sands, due to complicated underlying structuration mechanisms. This paper studies the effect of disparate microfines of different manufactured sands on the non-linear growth of static yield stress of cement pastes at rest. The paste mixtures were prepared with 0.40 and 0.275 water-to-cement mass ratio (W/C) and had a fixed mini-slump flow of 240 ± 5 …

Live Recording Of Lectures, Louise Lynch

Case studies: Digital Education

The final year module, consisting of 2-hour lectures and 2-hour tutorials, focuses on worked examples. To support students, especially those repeating the module, lectures were recorded and uploaded to Brightspace. Due to the difficulty of the subject and the small class size, in-person delivery was prioritised. The IT 360 mic was used for audio only, no video was recorded, calculations were done on OneNote Class Notebook using the pen functionality of the Surface Pro. This method gives students immediate access to worked examples. Open Broadcast Studio (OBS) was employed to manage different programmes without screen sharing interruptions, while maintaining the …

Numbas For Formative Assessment, Louise Lynch

Case studies: Digital Education

Numbas is an open-source e-assessment system aimed at mathematics and other numerate disciplines. It allows for the setup of individual assessments for students, increasing academic integrity. Numbas can autograde attempts, and the use of the Learning Tool Interoperability (LTI) within Brightspace allows instructors to view attempts, monitor progress, and alter marks where applicable. This adds a valuable element for both formative and summative assessments. In this module, Numbas was used to provide students with individual parameters for the same problems as part of their continuous assessment. These problems would consist of several steps and typically take over 30 minutes to …

Incorporating Screenpal Video To Brightspace Quiz “Hints” Function, Michael O Connor

Case studies: Digital Education

I have used the quiz function in Brightspace for some time as an asynchronous learning support and formative assessment technique for various cohorts from apprentice to UG FT students. Typically, I would create several MCQ quizzes around key learning outcomes (LOs) or “muddiest point” discoveries in the classroom. These quizzes were set up to allow the students unlimited attempts, with results published automatically and all question attempts shown with correct answers. While it was effective and well received (interesting particularly by apprentices whose summative assessment results are often high stakes) I often felt it became a repetitive answer selection exercise …

Modeling The Impacts Of Disruptive Events On Driving Behaviors, Transportation Safety, And Equity: Advanced Statistical Insights From The Covid-19 Pandemic, Xiaomeng Dong

Civil & Environmental Engineering Theses & Dissertations

This dissertation aims to understand how disruptive events —particularly the COVID-19 pandemic—affect driving behaviors, transportation safety and equity by leveraging advanced statistical modeling techniques and data from Virginia. This research pursues three overarching objectives. First, it employs multigroup structural equation modeling (SEM) to uncover the complex interrelationships among risky driving behaviors, injury severity, and pandemic-related factors, delineating the mechanisms through which COVID-19 has impacted crash outcomes via changing risky driving behaviors. Second, it leverages hidden Markov models to trace shifts in safety states over the pre-, during-, and post-pandemic periods, determining whether and when safety conditions return to pre-pandemic norms. …

Analysis Of Responder-Involved Struck-By Crashes, Jacob Wilhelm

Doctoral Dissertations and Master's Theses

Emergency responders face significant risks of injury and death from struck-by crashes while operating on or near roadways. Annually, about 50 responders are killed, and hundreds more are injured, leading to operational disruptions and damage to life-saving equipment (ERSI, 2024). This study takes a data-driven approach to identify key risk factors and effective countermeasures for reducing the severity of struck-by crashes. Key findings indicate that struck-by crashes most frequently occur on weekends during late-night hours (2 AM–4 AM), often at crash scenes or disabled vehicle scenes on limited-access highways. Driver behavior – particularly “D” drivers (distracted, drugged, drowsy, disgruntled) – …

Evaluating The Impact Of Access Density On Pedestrian And Bicycle Safety, Charles Hruda

Doctoral Dissertations and Master's Theses

This study examines the impact of access density on pedestrian and bicycle crash rates in urban areas of Florida. Access management, defined as the strategic control of vehicular access points along roadways, plays a crucial role in mitigating conflicts between various roadway users. Previous research has established a positive correlation between access density and crash rates, yet limited studies have analyzed its effects on vulnerable road users such as pedestrians and cyclists.

To quantify these impacts, this study identified high-crash roadway segments using Florida Department of Transportation (FDOT) data. Geometric, traffic, crash, and access management information was collected and analyzed …

Advancements In Pavement Marking Practice And Standards, Joseph Bruno

Purdue Road School

This Road School presentation details INDOT's initiative to improve road user safety through upgrades to pavement marking practices and standards. The presentation also discusses other recent changes to INDOT pavement marking standards and design guidance.

Low Cost And Systemic Safety Treatments For Local Governments, Taylor Ruble, Daniel Mccoy

Purdue Road School

The INDOT Traffic Engineering team WILL discuss lowcost safety options that can be used by local governments with or without dedicated safety funding. We’ll dive into the details and specifics of these treatments and discuss when they are appropriate for use. This interactive workshop is a great way for city and county engineers and local elected officials to gain a better understanding of systemic safety treatments.

The Evolution Of Traffic Signal Detection Technology, Carly Schiene, Haydn Malackowski

Purdue Road School

How has traffic signal actuation changed over time? Originally, a traffic signal’s main purpose was to assign the right-of-way to vehicles for collision avoidance, and now they are crucial tools to manage traffic flow, alleviate congestion and provide safety for pedestrians and bicyclists. This presentation will explore early detection methods, evaluate current technology, and explore the future of detection technology

Preserve Your Hma Pavements From The Start, Tim Zahrn, Andrew Eicher

Purdue Road School

This presentation will review sustainable preservation treatments and their application timeline to extend the life of asphalt pavement. We will discuss how pre-preservation treatments like a void reducing asphalt membrane, early-life preservation treatments such as rapid penetrating emulsion, and topical rejuvenators can reduce future maintenance and delay reconstruction. We will also look at mid-life treatments, such as micro-surfacing, fit into a preventative maintenance preservation plan. And finally cover end of life cold pavement recycling alternatives.

Louisville Viasmart Over-Height And Flood Driver Prevention And Protection Systems, William R. Lyon, Dana Spratt, Terri Combs, Chris Seidt

Purdue Road School

This exciting project is a federal grant project that deploys and uses the latest advancements on transportation technology to prevent over-height truck from striking tunnel/bridge overpasses and viaducts and to prevent all drivers from entering dangerous flooded roadways. These systems use the latest cyber-security and connected/automated vehicle (CAV V2X & X2V), Artificial intelligence (AI) and Machine Language solutions. The system also deploys new experimental technology assured to enhance all existing traveler notification systems currently in use. This project was specifically called out by then acting transportation Secretary Pete Buttigieg at the 2024 ITS America Conference in Phoenix, Arizona. He called …

Dynamic Wireless Power Transfer, George Mccue, Dionysios Aliprantis, Patrick Patterson, Benjamin O'Brien, Chiara Cervini, Bruno Krause Moras

Purdue Road School

Purdue University, in partnership with INDOT, PC Krause and Associates, White Construction, William Charles Electric, and Cummins, Inc. transitioned the embedment of dynamic wireless power transfer (DWPT) technology from a controlled test setting to real roadway implementation. This presentation delves into the construction process of the quarter-mile DWPT project on northbound US 52/231 in West Lafayette and outlines the plans for testing the technology with a Cummins truck later this year.

Bell Ford Bridge Reconstruction Project, Daniel Kurdziel, Jim Barker, Matt Lee

Purdue Road School

The Bell Ford Bridge was originally constructed in 1869 until it collapsed in the 20th century. The remains were salvaged and stored for 20 years until it was to be rebuilt in Hamilton County, IN. This is the only remaining Combination Post Truss in existence and was rebuilt using 95% of the original iron and 10% of the original timber.

Winning Your Team With Intentional Connection, Jessica Miller, Kenny Franklin

Purdue Road School

152. Winning Your Team With Intentional Connection As the leader of a team, how do you inspire others even when you don’t have all the answers? This session will introduce ways to be intentional in our relationships and make deeper connections with our team members. We hope you leave this session with the courage to be vulnerable and drive your vision.