Civil and Environmental Engineering Commons^™

Shm For Incipient Buckling Detection In Overloaded Structures Using Nonlinear System Identification Algorithms On Redundant Data Sets, Padmanabh Shridhar Desai

Dissertations, Master's Theses and Master's Reports

Structural health monitoring (SHM) detects and characterizes damage to predict failure, but failures such as buckling, which are not predicated on traditional damage modalities, are harder to detect. Direct load measurements are costly and difficult to implement (especially for dead loads) as they require copious numbers of sensors, which must be installed before loading is present. Vibration-based detection is a good alternative because it can infer global structural characteristics with relatively few sensors. This dissertation presents an SHM approach for detecting incipient buckling in structures under excessive loads based on non-linear models fit from measurements of small lateral vibrations due …

Workshop Outcomes Report: 2nd International Workshop On Seismic Resilience Of Arctic Infrastructure And Social Systems, Majid Ghayoomi, Daniela Morganti

Faculty Publications

The report provides an overview of the second international workshop on Seismic Resilience of Arctic Infrastructure and Social Systems. The report discusses agenda, workshop activities, interdisciplinary working groups, and results. It ends with several strategic questions and investigation plans that were developed as part of the workshop activities.

Smart Dynamic Concrete: Effect Of Coarse Aggregate Size Distribution On Fresh, Mechanical And Durability Properties, Venu Sipelli, Kamineni Aditya, Shravya Sripadapu

Mansoura Engineering Journal

SDC is a self-flowing concrete that demonstrates improved material efficiency through optimized aggregate gradation. Unlike SCC, which relies on high powder content for improved flowability, SDC provides improved flowability by optimized aggregate gradation, making it a promising alternative to SCC. This paper presents the fresh, mechanical, and durability performance of M40-grade SDC using OPC 53 grade cement, GGBS, CRF, and polycarboxylate-based superplasticizer. A constant cementitious content of 470 kg/m³ and water–cement ratio of 0.38 were maintained. The fresh, mechanical, and durability performances of SDC using three types of coarse aggregate combinations, namely, 70% 10 mm + 30% 20 mm, 75% …

Process Optimization And Quality Control In Manufacturing Of Frp Composites By Vartm, Mohamed Emadeldin Omar Abdelhadi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Railroad tank cars, being one of the most used means of transportation of hazardous material across the country, have not been structurally upgraded for a long time. Thus, the Pipeline and Hazardous Materials Safety Administration (PHMSA), a United States Department of Transportation (USDOT) agency, released a rule for safer transportation of highly hazardous and flammable liquids by railroad to enhance the design specifications of both the new and existing tank cars in May 2015. A multifunctional composite jacket is proposed as a new material to structurally enhance the railroad tank cars to withstand any accidents that could happen en route. …

Probability Of Detection For Corrosion-Induced Mass Loss And Yield Strain In Metal Structures Using Fe-C Coated Long Period Fiber Gratings Sensors And Electroresistive Strain Gauges, Ying Zhuo

Doctoral Dissertations

"Graphene-based, Fe-C coated long-period fiber grating (LPFG) sensors individually reveal a causal relation between LPFG wavelength change and Fe-C mass loss. Their correlation parameters vary significantly between the sensors mainly because hydrophobic multilayer graphene and graphene oxide make sensor fabrication inconsistent. This study explores MXene-based, Fe-C coated LPFG sensors due to MXene’s inherent hydrophilic property in the presence of surface functional groups such as hydroxyl and oxygen and the probability of detection (POD) for mass loss from Fe-C coated LPFG sensors when deployed at a fixed location. A novel fabrication process incorporating Piranha solution pretreatment is proposed to ensure uniform …

Enhancing Health And Safety Practices In Construction Site In Developing Nations Through Technology Advancement In South Western Nigeria, Mubaraq Lawal, Abba Mahmud, Ismail Gbolahan Dere, Thankgod Agbo Owoicho

CSID Journal of Infrastructure Development

The construction sector plays a critical role in urban development and economic growth, yet it continues to face major challenges that threaten worker health and safety. Traditional safety measures are not always sufficient for the complex conditions found on construction sites, which creates a need for technology‑based solutions. This study investigates the relationship between technology adoption and health and safety practices in the construction industry in Lagos, Nigeria. The study identifies the major causes of site accidents, examines the level of technology use on construction sites, and reviews existing literature through both primary and secondary data. Primary data were collected …

The Use Of Local Materials For The Interior Quality Of Swahili Building Design In Tanzania, Luiana Makundi, Jacob Lutta

Tanzania Journal of Engineering and Technology (TJET)

Swahili architecture in Tanzania is recognized by spatial capacity to adapt environmental changes. This research explores the role of locally available materials in shaping the interior quality by focusing on functional, aesthetic appeal and supporting sustainable environment. A mixed-methods approach was applied which, involves field surveys, case study and interviews with different local professionals in building industry. Dar-es-Salaam was used as a case study area that was critically analysed to identify construction practices and applications of local materials in building interior spaces. A particular focus was placed on materials durability, aesthetic, ecological, environmental balance and thermal efficiency which seems to …

Blast Resistant Structure, Juan Henriquez-Hernandez

Student Scholar Symposium

No abstract provided.

Evaluating The Impact Of Precast Vs. Cast-In-Place Concrete: A Life Cycle Assessment Of A Parking Garage In Nashville, Robert Trey Owen

Student Scholar Symposium

Concrete is one of the most widely used building materials in the construction industry, generating $64 billion in revenue, according to the Concrete Financial Insights Index. Given the material’s extensive use, construction professionals seek ways to optimize construction project budgets and schedules. Precast concrete, which is manufactured offsite and then transported to the project when needed, is a potential solution for these goals. This research aims to quantify the benefits of precast concrete over typical cast-in-place methods using a life cycle analysis for a parking garage structure located in Nashville Tennessee.

The data for the two materials will be compared …

Equity-Aware Natural Hazards Resilience Assessment And Improvement Of Road Networks, Naqib Mashrur

LSU Doctoral Dissertations

As climate change intensifies the frequency and severity of hurricanes, the resulting flood events pose escalating threats to transportation infrastructure and community well-being. This dissertation addresses the intersection of flood resilience, network connectivity, and social equity by integrating principles from network analysis, equity planning, and disaster resilience. The research begins by examining the social dimensions of accessibility loss during hurricane-induced flooding. Spatial and demographic analysis reveals that Native American and Hispanic populations in the case study region experience the most significant reductions in access to essential service facilities, highlighting inequities in systems.

Investigating a region southern Louisiana road network demonstrates …

Bond Behavior Of Full-Scale Beams Using Sustainable Self-Compacting Concrete, Hayder H. Alghazali, Atheer H.M. Algburi, John J. Myers

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Sustainable concrete is a step towards greener and more eco-friendly concrete construction practices, helping to solve global environmental problems. The present study focuses on the bond behavior between steel reinforcement and greener self-compacting concrete, specifically sustainable self-compacting concrete (SUS-SCC). Three SUS-SCC mixtures with different fly ash (FA) to cement replacement levels of [50, 60, and 70% (by mass)] were developed. Twelve full-scale SUS-SCC beams with a cross-section of (305 x 57) mm and a total length of 3048 mm were cast and tested using a four-point load test setup. The effect of longitudinal and lateral steel reinforcement ratios in the …

Friction And Texture Evaluation Of Asphalt-Based Binders As Alternatives To Epoxy-Based High-Friction Surface Treatments, Alireza Roshan, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High-friction surface treatment (HFST) is a safety-focused pavement treatment that restores and maintains pavement friction to reduce road accidents. Traditional epoxy-based HFSTs, while widely used, face challenges such as high costs, potential compatibility issues with the substrate pavement, and long-term durability under specific conditions. This study investigates asphalt-based alternative HFST, which is compatible with various pavement types and cost-effective and versatile solutions for a wider range of pavement applications. Performance and friction testing, including the British pendulum test, British wheel test, and dynamic friction test, were performed to examine the coefficient of friction (COF) before and after polishing with a …

Evaluating Crumb Rubber Modified (Crm) Asphalt As A Sustainable Binder Alternative For High-Friction Surface Treatments, Abdallah Aboelela, Alireza Roshan, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High-friction surface treatments (HFSTs) are widely applied to improve pavement safety by enhancing long-term skid resistance. Although epoxy resins are commonly used due to their strength and durability, their high cost, susceptibility to delamination, incompatibility with substrates of flexible pavements, and adverse environmental concerns limit their long-term performance. This study presents crumb rubber modified (CRM) asphalt as a sustainable alternative binder for HFST applications. CRM binders offer high performance and compatibility with existing pavement surfaces, cost effectiveness and reduced environmental impacts as compared to epoxy binders. In addition, the binder development utilizes enhanced recycling technologies for interacting with used tire …

Experimental Determination Of Modulus Of Rupture For Concrete Masonry Beams And Implications For The Tms 402/602 Code, Shreedhar K C

All Theses

Currently, the experimental database for Modulus of Rupture (MOR) of masonry beams is limited, and current provisions in TMS 402/602-22 use the MOR values from wallette tests. The primary goal of this research is to experimentally determine the parameters that influence MOR. The secondary goal of this work is to compare the MOR values from beam and bond wrench tests obtained in this study with each other as well as with values published in the literature. The standard ASTM E518 test was used for determining MOR values for beams, and a modified approach to ASTM C1072 that nullifies the eccentricity …

Dynamic Topology Optimization And Experimental Validation Of Reinforcement For Pcb Robotics, Ryan G. Semler

All Theses

Ongoing research between Clemson University and the NASA Jet Propulsion Laboratory (JPL) has been conducted to characterize and assess rigid-flex printed circuit board (PCB) robotics subjected to dynamic loads. A lightweight, PCB lunar rover, PUFFER (Pop-Up Flat Folding Explorer Robot), was designed by NASA JPL for Mars missions, but its deployment for lunar missions has been investigated as well. Its current architecture, however, is insufficient for navigating and surviving the lunar environment, and reinforcement has been recommended as a solution to protect larger panels.

This research work presents a dynamic topology optimization process for PCB panel reinforcement. A thorough literature …

Downdrag Defeated – The Neutral Plane Method, Kyle L. Zak, Min Sang Lee

Civil Engineering Professional Development Seminar

The neutral plane method for evaluating downdrag on deep foundations has been gaining popularity over the past few years. It is a powerful tool that, in many situations, can all but eliminate downdrag concerns on deep foundations. INDOT has allowed its use recently and adapted its forms to accommodate this method. The presentation will cover the theory behind the method and how it can be applied in bridge design. We will then demonstrate how to incorporate the method into the INDOT workflow, and we’ll show a couple real-life examples where the neutral plane method saved the day.

Mass Timber Construction: Products, Performance And Design, Anthony Harvey

Civil Engineering Professional Development Seminar

Due to their high strength, dimensional stability and positive environmental performance, mass timber building products are quickly becoming materials of choice for sustainably‐minded designers. This presentation will provide a detailed look at the variety of mass timber products available, including glue‐laminated timber (glulam), cross laminated timber (CLT), nail laminated timber (NLT), heavy timber decking, and other engineered and composite systems. Applications for the use of these products under modern building codes will be discussed, and examples of their use in U.S. projects reviewed. Mass timber’s ability to act as both structure and exposed finish will also be highlighted, as will …

Comparative Study Of Interfacial Bond Strength Of Steel H-Pile With Ultra-High Performance And Polymer Concrete Jacket, Binod Shrestha, Mohanad M. Abdulazeez, Mohamed A. Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigates the bond behavior of steel H-pile encased in concrete jackets under push-out loading, considering the effects of concrete type and embedment length. Nine full-scale specimens were tested using three concrete types: ultra-high-performance concrete (UHPC), Methyl Methacrylate Polymer Concrete (MMA-PC), and conventional concrete (CC), with embedment lengths of 63.5 mm, 127 mm, and 190.5 mm. The experimental results revealed that MMA-PC jacket demonstrated the highest bond strength, though gains were marginal beyond 127 mm. UHPC exhibited superior tensile strength and ductility, preventing splitting failure. UHPC also displayed the highest interfacial fracture energy of 9.63 N/mm, exceeding MMA-PC and …

From The Editors, Rully Karim Dr.

Journal of Project Management & Construction

The Journal of Project Management and Construction (JPMC) is a peer-reviewed publication dedicated to advancing the field of project management and construction, grounded in the principles outlined in the PMBOK 6th Edition. Our focus encompasses the ten knowledge areas essential to successful project management: Integration, Scope, Schedule, Cost, Quality, Resource, Communications, Risk, Procurement, and Stakeholder Management.

JPMC publishes original research papers written in English that provide deeper insights into these knowledge areas and contribute to the development of best practices in project management and construction. Submissions may include theoretical analyses, computational models, experimental observations, or a combination of both theoretical …

The Impact Of Relative Bridge Width On Highway Crashes In Nebraska, Mujahid Ali Bahadur

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

This research examines how bridge width relative to the approach roadway affects crash occurrence on Nebraska highways. The Nebraska Department of Transportation-(NDOT) Bridge Design Manual sets minimum bridge widths based on roadway classification, traffic projections, and the American Association of State Highway and Transportation Officials’ (AASHTO) Load and Resistance Factor Design (LRFD) criteria. While these guidelines ensure structural and functional adequacy, they do not incorporate safety performance analyses based on crash data. This leaves an important gap in understanding how bridge and approach roadway width decisions influence safety outcomes.

This research has four objectives: (1) evaluate crash frequency across different …

Co2-Induced Changes In Rheology, Structural Evolution, And Particle Characteristics Of Cement Paste, Seongho Han, Tae Yong Shin, Seung Mo Kim, Jae Hong Kim, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The injection of carbon dioxide (CO₂) into cementitious systems has emerged as a promising approach to enhancing sustainability in concrete production. This study explores the impact of CO₂ injection on the rheological behavior, structural build-up, and particle size evolution of cement paste by systematically varying the water-to-cement ratio (w/c) (0.35, 0.4, and 0.5) and CO₂ concentration (0.06, 0.28, and 0.84 mol). Rheological analysis revealed a significant increase in initial yield stress with CO₂ injection. Using the Modified Bingham model, yield stress increased by 72 % and 150 % for 0.28- and 0.84-mol CO₂, …

Assessment Of Safety Monitoring Indexes Of High Rcc Gravity Dams Considering Hydraulic Fracture, Mohamed Ramdan, Jinsheng Jia Professor, Xu Li Professor

Journal of Engineering Research

High concrete gravity dams, particularly Roller-Compacted Concrete (RCC) types, face long-term safety challenges due to weak interlayer formation and crack propagation. This study presents a comprehensive evaluation of safety monitoring indexes for the Guxian high RCC dam (currently under construction in China) using both numerical and theoretical models. A Finite Element Method (FEM) was applied with two approaches: the strength reduction method, which considers weak layers, and the overloading method, which simulates extreme loading without accounting for material degradation. A comparative analysis between these two methods was conducted to determine which more effectively evaluates dam safety under varying conditions. Additionally, …

Flexural Behavior Of Sustainable Concrete Beams Containing Waste Tire Fibers And Recycled Aggregates, Wael M. Montaser Ass.Prof

Journal of Engineering Research

The increasing accumulation of diverse waste materials poses a significant societal challenge, highlighting the importance of developing methods to reuse such waste effectively. One promising solution involves incorporating recycled coarse aggregate (RCA) obtained from demolished concrete into new concrete mixtures. Additionally, tire-derived fibers (TDF), sourced from recycled tires, present an environmentally friendly substitute for conventional reinforcement materials. The integration of RCA with TDF in reinforced concrete beams offers a sustainable approach to enhancing structural performance. This experimental study investigates the flexural performance of reinforced concrete beams containing recycled coarse aggregate (RCA) and tire-derived fibers (TDF). Four mixes with varying RCA …

The Influence And Firing Of Zircon, Ilmenite, And Magnetite As Partial Sand Replacement On The Properties Of Concrete For Specialized Applications., Samy A. Fawzy

Journal of Engineering Research

This study investigates the impact of partially replacing sand with varying percentages (10%, 20%, 30%, and 50%) of zircon (ZrSiO4), ilmenite (FeTiO3), and magnetite (Fe3O4) on the physical and mechanical properties of concrete. The research focuses on evaluating the compressive strength, density and radiation shielding capabilities of the modified concrete mixtures. The effect of firing concrete cubes(600,900 and 1100 C) with various percentages of the three materials were studied also. The use of these heavy minerals aims to enhance concrete properties for specialized applications such as radiation shielding structures and high-density construction. Results indicate that increasing the replacement percentage of …

Experimental And Theoretical Studies Of Novel Resilient Smart Shear Keys For Speedy Functional Recovery Of Highway Bridges After Extreme Events, Xinzhe Yuan, Jun Han, Jian Zhong, Haibin Zhang, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Sacrificial shear keys in small-to-medium-span highway bridges mainly provide lateral support to the bridge superstructure under extreme events such as earthquake and/or tsunami. However, such support could lead to irreparable harm to important bridge elements like abutments and bent caps (base), delaying the functional recovery of bridges in the aftermath. In addition, existing designs of the shear key primarily emphasize resistant capacity but overlook resilience. This study introduces a new sliding, modular, adaptive, replaceable, and two-dimensional (SMART) shear key designed to enhance the resilience of I-girder highway bridges. The SMART shear key has three primary goals: 1) enabling the rapid …

Interfacial Shear Transfer Between Steel H-Piles And Concrete Encased In Cfrp, Mohanad M. Abdulazeez, Binod Shrestha, Mohamed A. Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Numerous in-service steel H-piles, a common structural element in the bridge industry, suffer severe corrosion. One of the adopted solutions is to use concrete jackets to encase the corroded sections. Therefore, interfacial shear strength between the uncorroded section and the jacket is crucial. This paper presents an experimental investigation of the interfacial shear stresses of 18 full-scale H-piles encased in concrete jackets and subjected to push-out static testing. The concrete jackets are confined using different carbon fiber-reinforced polymer (CFRP) confinement ratios. Different cross-sectional areas and distributions of shear studs are investigated. The average and maximum bond stresses are evaluated and …

Understanding The Relationship Between Structural Failure And Fatalities In Tornadoes: A Quantitative Investigation Of The 2021 Midwest Tornado Outbreak, Yi Zhao, Ruwen Qin, John W. Van De Lindt, Justin Sharpe, Grace Yan

Engineering Management and Systems Engineering Faculty Research & Creative Works

During 1950-2011, the number of fatalities caused by tornadoes in the U.S. significantly exceeded the fatalities caused by both hurricanes and earthquakes. To reduce tornado induced fatalities, it is essential to understand how structures/building failures correlate with fatalities and who are more vulnerable to tornadoes. Insights from this study are intended to help provide information to decision-makers on where to allocate limited resources for enhancing tornado resilience. By examining both the fatality data and structural damage data in the 2021 Midwest Tornado Outbreak, the objective of this study is to examine the occurrence of fatalities during tornadoes across various types …

Data-Driven Shear Capacity Prediction Of Studs Embedded In Uhpc For Steel-Uhpc Composite Structures, Yanping Zhu, Woubishet Zewdu Taffese, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study employs ensemble learning algorithms to accurately predict the shear capacity of studs embedded in ultrahigh performance concrete (UHPC), a critical aspect of structural engineering. Using a comprehensive data set featuring six UHPC slab features, seven stud features, and one shear pocket feature, 35 ensemble models are developed across five cases and seven algorithms (bagging, random forest, AdaBoost, gradient boosting, XGBoost, CatBoost, and LightGBM). The Shapley additive explanations (SHAP) analysis is conducted on the top-performing models to gain insights into their decision-making mechanisms. Results indicate that transforming UHPC slab geometry parameters into a volume, alongside different diameter ratios, proves …

Failure Analysis Of Prestressed Concrete Girder Bridges Under Over-Height Truck Impacts, Mohamed T. Elshazli, Mohamed Elgawady, Tao Xing, Ahmed Ibrahim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Accidental collisions between over-height trucks and bridge superstructures are a common threat to existing bridge infrastructure. These incidents often stem from illegal over-height vehicles or truck operators' unawareness of clearance limits, posing serious safety risks and causing substantial structural damage. This study presents a comprehensive numerical investigation of the dynamic response of prestressed concrete girder bridges subjected to over-height truck impacts. Large-scale finite element models were developed in LS-DYNA, with validation conducted against experimental results. The parametric study explored impact speeds ranging from 16 to 113 km/h (10 to 70 mph), impactor masses between 2 and 6 tons, impact locations, …

Detection Of Bacterial Genomic Dna Fragments Using The Mxene Crispr-Cas9 Field-Effect Transistor, Jiaoli Li, Ali Taheri, Weijia Liu, Ying Zhuo, Pengfei Ma, Chenglin Wu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Clustered regularly interspaced short palindromic repeats (CRISPR)-based field-effect transistor (FET) sensors provide a promising platform for highly specific and amplification-free nucleic acid detection. However, their direct application in identifying target sequences within intact genomic DNA remains underexplored. We developed a CRISPR-Cas9 FET sensor for detecting DNA sequences by immobilizing Cas9 onto a graphene-MXene sensing interface via (3-aminopropyl)triethoxysilane (APTES) functionalization. The sensor targeted Stx1, a 440 bp laboratory-amplified fragment associated with Shiga toxin production in pathogenic E. coli. Gel electrophoresis confirmed the precise cleavage of Stx1, while the nontarget sequence Stx2 remained undetected. FET measurements further validated the sensor's specificity, showing …